In vitro and in vivo degradation of non-woven materials made of poly(ε-caprolactone) nanofibers prepared by electrospinning under different conditions
The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Abstract
The aim of this study was to prepare non-woven materials from a biodegradable polymer, poly(epsilon-caprolactone) (PCL) by electrospinning. PCL was synthesized by ring-opening polymerization of epsilon-caprolactone in bulk using stannous octoate as the catalyst under nitrogen atmosphere. PCL was then processed into non-woven matrices composed of nanofibers by electrospinning of the polymer from its solution using a high voltage power supply. The effects of PCL concentration, composition of the solvent (a mixture of chloroform and DMF with different DMF content), applied voltage and tip-collector distance on fiber diameter and morphology were investigated. The diameter of fibers increased with the increase in the polymer concentration and decrease in the DMF content significantly. Applied voltage and tip-collector distance were found critical to control 'bead' formation. Elongation-at-break, ultimate strength and Young's modulus were obtained from the mechanical tests, which were all increased by increasing fiber diameter. The fiber diameter significantly influenced both in vitro degradation (performed in Ringer solution) and in vivo biodegradation (conducted in rats) rates. In vivo degradation was found to be faster than in vitro. Electrospun membranes were more hydrophobic than PCL solvent-casted ones; therefore, their degradation was a much slower process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y. M., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,977
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Polymer nanofibers assembled by electrospinning
Frenot, A., & Chronakis, I. S. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00004-9 · Cited by 1,324
Micro- and Nanostructured Surface Morphology on Electrospun Polymer Fibers
Megelski, S., Stephens, J. S., Chase, D. B., & Rabolt, J. F. (2002) · Macromolecules · doi:10.1021/ma020444a · Cited by 1,323
Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering
Xu, C. Y., Inai, R., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00593-3 · Cited by 1,213
Electrospinning of polyurethane fibers
Demir, M. M., Yilgor, I., Yilgor, E., & Erman, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00136-2 · Cited by 1,099
Hydrolytic degradation of devices based on poly(DL-lactic acid) size-dependence
Grizzi, I., Garreau, H., Li, S., & Vert, M. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93258-f · Cited by 895
Electrospun nanofibrous polyurethane membrane as wound dressing
Khil, M., Cha, D., Kim, H., Kim, I., & Bhattarai, N. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10058 · Cited by 835
Mo, X. M., Xu, C. Y., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.042 · Cited by 803
Biodegradable polymers as drug delivery systems
(1992) · Comparative Biochemistry and Physiology Part A: Physiology · doi:10.1016/0300-9629(92)90663-b · Cited by 779
Electrospinning and mechanical characterization of gelatin nanofibers
Huang, Z.-M., Zhang, Y. Z., Ramakrishna, S., & Lim, C. T. (2004) · Polymer · doi:10.1016/j.polymer.2004.04.005 · Cited by 713
Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate
Liu, H., & Hsieh, Y. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10261 · Cited by 669
Nano-fibrous scaffolds for tissue engineering
Smith, L. A., & Ma, P. X. (2004) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2003.12.004 · Cited by 652
Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via electrospinning
Lee, K. H., Kim, H. Y., Khil, M. S., Ra, Y. M., & Lee, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00820-0 · Cited by 586
Kim, K., Yu, M., Zong, X., Chiu, J., Fang, D., Seo, Y.-S., Hsiao, B. S., Chu, B., & Hadjiargyrou, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00407-1 · Cited by 562
Li, W., Danielson, K. G., Alexander, P. G., & Tuan, R. S. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10101 · Cited by 536
Larrondo, L., & St. John Manley, R. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180190601 · Cited by 490
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Hou, Q., Grijpma, D. W., & Feijen, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00562-8 · Cited by 457
Tracy, M. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00002-2 · Cited by 411
Marra, K. G., Szem, J. W., Kumta, P. N., DiMilla, P. A., & Weiss, L. E. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19991205)47:3<324::aid-jbm6>3.0.co;2-y · Cited by 380
The intracellular degradation of poly(ε‐caprolactone)
Woodward, S. C., Brewer, P. S., Moatamed, F., Schindler, A., & Pitt, C. G. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190408 · Cited by 380
Degradable polymers : principles and applications
SCOTT, G., & Gilead, D. (1995) · Cited by 315
Further investigations on the hydrolytic degradation of poly (DL-lactide)
Li, S., & McCarthy, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(97)00226-3 · Cited by 301
Elastomeric nanofibers of styrene-butadiene-styrene triblock copolymer
Fong, H., & Reneker, D. H. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19991215)37:24<3488::aid-polb9>3.0.co;2-m · Cited by 280
Human articular chondrocyte adhesion and proliferation on synthetic biodegradable polymer films
Ishaug-Riley, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00155-6 · Cited by 235
Ciapetti, G., Ambrosio, L., Savarino, L., Granchi, D., Cenni, E., Baldini, N., Pagani, S., Guizzardi, S., Causa, F., & Giunti, A. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00263-1 · Cited by 230
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Zong, X., Ran, S., Fang, D., Hsiao, B. S., & Chu, B. (2003) · Polymer · doi:10.1016/s0032-3861(03)00464-6 · Cited by 214
Evaluation of Ultra-Thin Poly(ε-Caprolactone) Films for Tissue-Engineered Skin
Ng, K. W., Hutmacher, D. W., Schantz, J.-T., Ng, C. S., Too, H.-P., Lim, T. C., Phan, T. T., & Teoh, S. H. (2001) · Tissue Engineering · doi:10.1089/10763270152436490 · Cited by 179
Synthesis, characterization and degradation of ABA block copolymer of l-lactide and ε-caprolactone
Qian, H., Bei, J., & Wang, S. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00031-8 · Cited by 152
Poly(d,l-cactide/ε-caprolactone)/hydroxyapatite composites
Ural, E., Kesenci, K., Fambri, L., Migliaresi, C., & Piskin, E. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00098-3 · Cited by 123
Block and random copolymers of ε-caprolactone
Duda, A., Biela, T., Libiszowski, J., Penczek, S., Dúbois, P., Mecerreyes, D., & Jérôme, R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00167-5 · Cited by 115
Importance of distinct water environments in the hydrolysis of poly(DL-lactide-co-glycolide)
Schmitt, E. A., Flanagan, D. R., & Linhardt, R. J. (1994) · Macromolecules · doi:10.1021/ma00081a019 · Cited by 112
New developments on the ring opening polymerisation of polylactide
Jacobsen, S., Fritz, H. ‐., Degée, P., Dúbois, P., & Jérôme, R. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00053-9 · Cited by 112
Biocomposites of non-crosslinked natural and synthetic polymers
Coombes, A. G. A., Verderio, E. A. M., Shaw, B., Li, X., Griffin, M., & Downes, S. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00341-6 · Cited by 109
Biodegradable lactone copolymers. II. Hydrolytic study of ?-caprolactone and lactide copolymers
Malin, M., Hiljanen-Vainio, M., Karjalainen, T., & Sepp�l�, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1289::aid-app12>3.0.co;2-1 · Cited by 109
Valero-Cabr�, A., Tsironis, K., Skouras, E., Perego, G., Navarro, X., & Neiss, W. F. (2001) · Journal of Neuroscience Research · doi:10.1002/1097-4547(20010115)63:2<214::aid-jnr1014>3.0.co;2-d · Cited by 103
Enhancing Hepatocyte Adhesion by Pulsed Plasma Deposition and Polyethylene Glycol Coupling
Carlisle, E., Mariappan, M. R., Nelson, K. D., Thomes, B. E., Timmons, R. B., Constantinescu, A., Eberhart, R. C., & Bankey, P. E. (2000) · Tissue Engineering · doi:10.1089/107632700320883 · Cited by 101
Meek, M. F., den Dunnen, W. F. A., Schakenraad, J. M., & Robinson, P. H. (1999) · Microsurgery · Cited by 88
Characterization and permeation of microporous poly(ε-caprolactone) films
Lin, L., & Lu, C.-H. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00652-4 · Cited by 73
Ultrastructural observations of cells at the interface of a biodegradable polymer: Polyglactin 910
Matlaga, B. F., & Salthouse, T. N. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170115 · Cited by 70
Fambri, L., Migliaresi, C., Kesenci, K., & Pişkın, E. (2002) · Springer eBooks · doi:10.1007/0-306-47583-9_4 · Cited by 55
Preparation of Porous Poly(e-caprolactone) Structures
Hou, Q., Grijpma, D. W., & Feijén, J. (2002) · Macromolecular Rapid Communications · doi:10.1002/1521-3927(20020301)23:4<247::aid-marc247>3.0.co;2-5 · Cited by 45
Preparation and degradation of l-lactide and ε-caprolactone homo and copolymer films
Yavuz, H., Babaç, C., Tuzlakoğlu, K., & Pişkın, E. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00242-7 · Cited by 42
Biodegradable Polymers in Medicine
Piskin, E. (2002) · Springer eBooks · doi:10.1007/978-94-017-1217-0_10 · Cited by 33
Poly(D,L-lactide/∊-Caprolactone)/Hydroxyapatite Composites as Bone Filler: An in Vivo Study in Rats
Şenköylü, A., Ural, E., Kesenci, K., şìmşek, A., Ruacan, Ş., Fambri, L., Migliaresi, C., & Piskin, E. (2002) · The International Journal of Artificial Organs · doi:10.1177/039139880202501209 · Cited by 23
Aydın, H. M., Pişkın, E., & Çalımlı, A. (2004) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911504046688 · Cited by 20
A novel biodegradable PCL film for tendon reconstruction: Achilles tendon defect model in rats.
Kazımoğlu, C., Bölükbaşı, S., Kanatlı, U., Şenköylü, A., Altun, N., Babaç, C., Yavuz, H. U., & Piskin, E. (2003) · PubMed · Cited by 18
Hiljanen-Vainio, M., Karjalainen, T., & Sepp�l�, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1281::aid-app11>3.0.co;2-9
Lu (1999) · doi:10.1002/(sici)1097-4636(199908)46:2
Cited by
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Progess in superhydrophobic surface development
Roach, P., Shirtcliffe, N. J., & Newton, M. I. (2008) · Soft Matter · doi:10.1039/b712575p · Cited by 1,615
Bone tissue engineering: A review in bone biomimetics and drug delivery strategies
Porter, J. R., Ruckh, T. T., & Popat, K. C. (2009) · Biotechnology Progress · doi:10.1002/btpr.246 · Cited by 809
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Design, fabrication and characterization of PCL electrospun scaffolds—a review
Cipitria, A., Skelton, A., Dargaville, T. R., Dalton, P. D., & Hutmacher, D. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04502k · Cited by 627
Metadata
- Authors
- Bölgen, N., Menceloğlu, Y. Z., Acatay, K., Vargel, İ., & Pişkin, E.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 2005-01
- Volume
- 16
- Issue
- 12
- Pages
- 1537-1555
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W2155805644
- Cited by
- 311
- References
- 57
- FWCI
- 3.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.