The DOI matches its Crossref record.
Cellulose and Collagen Derived Micro-Nano Structured Scaffolds for Bone Tissue Engineering
Abstract
Scaffold based bone tissue engineering (BTE) has made great progress in regenerating lost bone tissue. Materials of natural and synthetic origin have been used for scaffold fabrication. Scaffolds derived from natural polymers offer greater bioactivity and biocompatibility with mammalian tissues to favor tissue healing, due to their similarity to native extracellular matrix (ECM) components. Often it is a challenge to fabricate natural polymer based scaffolds for BTE applications without compromising their bioactivity, while maintaining adequate mechanical properties. In this work, we report the fabrication and characterization of cellulose and collagen based micro-nano structured scaffolds using human osteoblasts (HOB) for BTE applications. These porous micro-nano structured scaffolds (average pore diameter 190 +/- 10 microm) exhibited mechanical properties in the mid range of human trabecular bone (compressive modulus 266.75 +/- 33.22 MPa and strength 12.15 3 +/- 2.23 MPa). These scaffolds supported the greater adhesion and phenotype maintenance of cultured HOB as reflected by higher levels of osteogenic enzyme alkaline phosphatase and mineral deposition compared to control polyester micro-nano structured scaffolds of identical pore properties. These natural polymer based micro-nano structured scaffolds may serve as alternatives to polyester based scaffolds for BTE applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Even though synthetic polymers that are prepared with desired elasticity and molecular weight display promising results, they are found prone to acidic degradation that leads to the liberation of products that harm the tissue healing process [14].”
From Nano-hydroxyapatite/collagen composite as scaffold material for bone regeneration. (2023) · cites this paper as [14]
Citations
Cited by
Sorted by citations
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G. S., Clarke, J., Picard, F., Riches, P. E., Jia, L., Han, F., Li, B., & Shu, W. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,388
“As part of the normal ECM it is inherently biocompatible, biodegradable and can stimulate cell proliferation and differentiation [205,206].”
BackgroundBone regenerative medicine: classic options, novel strategies, and future directions
Oryan, A., Alidadi, S., Moshiri, A., & Maffulli, N. (2014) · Journal of Orthopaedic Surgery and Research · doi:10.1186/1749-799x-9-18 · Cited by 1,294
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre‐Esteves, M., & Ramı́rez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 969
Recent advances in nanocellulose for biomedical applications
Jorfi, M., & Foster, E. J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41719 · Cited by 737
Fernández, M., Abbah, S. A., McNamara, L. M., Zeugolis, D. I., Pandit, A. S., & Biggs, M. J. P. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.09.005 · Cited by 524
“Studies with these next generation scaffolds indicate that they can be utilized to produce hierarchical bone scaffolds [250], and are effective delivery vectors for targeted drug delivery [251–255] with controlled drug release profiles, such as immediate, smooth, pulsatile, delayed, and biphasic releases [256,257].”
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Self-citationHierarchical Structures of Bone and Bioinspired Bone Tissue Engineering
Liu, Y., Luo, D., & Wang, T. (2016) · Small · doi:10.1002/smll.201600626 · Cited by 482
Bioactive polymeric scaffolds for tissue engineering
Stratton, S., Shelke, N. B., Hoshino, K., Rudraiah, S., & Kumbar, S. G. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.11.001 · Cited by 469
Self-citationNatural Polymeric Scaffolds in Bone Regeneration
Filippi, M., Born, G., Chaaban, M., & Scherberich, A. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00474 · Cited by 378
The role of natural polymers in bone tissue engineering
Guo, L., Liang, Z., Yang, L., Du, W., Yu, T., Tang, H., Li, C., & Qiu, H. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.08.055 · Cited by 369
Production and Status of Bacterial Cellulose in Biomedical Engineering
Moniri, M., Moghaddam, A. B., Azizi, S., Rahim, R. A., Ariff, A., Saad, W. Z., Navaderi, M., & Mohamad, R. (2017) · Nanomaterials · doi:10.3390/nano7090257 · Cited by 326
“In a similar study, Kumbar and coworkers [158,159] developed mechanical properties of cellulose scaffold materials for bone tissue engineering applications.”
BackgroundCellulose-based composite scaffolds for bone tissue engineering and localized drug delivery
Janmohammadi, M., Nazemi, Z., Salehi, A. O. M., Seyfoori, A., John, J. V., Nourbakhsh, M. S., & Akbari, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.05.018 · Cited by 323
Polysaccharide biomaterials for drug delivery and regenerative engineering
Shelke, N. B., James, R., Laurencin, C. T., et al. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3266 · Cited by 281
Self-citationCritical attributes of nanofibers: Preparation, drug loading, and tissue regeneration
Pelipenko, J., Kocbek, P., & Kristl, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.043 · Cited by 232
Aravamudhan, A., Ramos, D. M., Nada, A. A., & Kumbar, S. G. (2014) · Natural and Synthetic Biomedical Polymers · doi:10.1016/b978-0-12-396983-5.00004-1 · Cited by 238
Self-citationCitric acid: A green cross-linker of biomaterials for biomedical applications
Salihu, R., Razak, S. I. A., Zawawi, N. A., Kadir, M. R. A., Ismail, N. I., Jusoh, N., Mohamad, M. R., & Nayan, N. H. M. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110271 · Cited by 205
Khan, S., Ul‐Islam, M., Khattak, W. A., et al. (2014) · Cellulose · doi:10.1007/s10570-014-0528-4 · Cited by 192
“These nanocomposites have shown tremendous improvements in their magnetic, electrical, catalytic, biosensing, environmental, optical, and biological properties (Aravamudhan et al. 2013; Fiayyaz et al. 2014; Wang 2002).”
BackgroundAsa’ad, F., Pagni, G., Pilipchuk, S. P., Giannì, A. B., Giannobile, W. V., & Rasperini, G. (2016) · International Journal of Dentistry · doi:10.1155/2016/1239842 · Cited by 153
“Being the major organic component of the ECM in native bone makes collagen an attractive biomaterial for BTE applications [56].”
BackgroundBacterial Cellulose—A Remarkable Polymer as a Source for Biomaterials Tailoring
Popa, L., Ghica, M. V., Tudoroiu, E.-E., Ionescu, D.-G., & Dinu‐Pîrvu, C. (2022) · Materials · doi:10.3390/ma15031054 · Cited by 140
“These scaffolds are competitors for other polyester-based scaffolds used in bone restoration [202].”
BackgroundIn situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration
Kérourédan, O., Hakobyan, D., Rémy, M., Ziane, S., Dusserre, N., Fricain, J., Delmond, S., Thébaud, N., & Devillard, R. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2620 · Cited by 145
Additive manufacturing of natural biopolymers and composites for bone tissue engineering
Bose, S., Koski, C., & Vu, A. A. (2020) · Materials Horizons · doi:10.1039/d0mh00277a · Cited by 124
Repanas, A., Andriopoulou, S., & Glasmacher, B. (2016) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.12.007 · Cited by 107
Crosslinked pullulan/cellulose acetate fibrous scaffolds for bone tissue engineering
Atila, D., Keskin, D. S., & Tezcaner, A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.015 · Cited by 86
Guerrero, J., Catros, S., Derkaoui, S. M., Lalande, C., Siadous, R., Bareille, R., Thébaud, N., Bordenave, L., Chassande, O., Visage, C. L., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.025 · Cited by 81
Polymeric Biomaterials in Tissue Engineering and Regenerative Medicine
Tang, X., Thankappan, S. K., Lee, P. C. K., Fard, S. E., Harmon, M. D., Tran, K., & Yu, X. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396983-5.00022-3 · Cited by 90
Self-citationBiomimetic Mineralization on a Macroporous Cellulose-Based Matrix for Bone Regeneration
Petrauskaitė, O., Gomes, P. D. S., Fernandes, M. H., et al. (2013) · BioMed Research International · doi:10.1155/2013/452750 · Cited by 75
“These results are in line with a variety of studies suggesting that cellulose is a useful scaffolding material in regenerative medicine, including in bone tissue applications, reporting the adhesion, proliferation, and differentiation of osteoblastic lineage cells [19, 34–36].”
ResultIn situ synthesis of a bio-cellulose/titanium dioxide nanocomposite by using a cell-free system
Ullah, M. W., Ul‐Islam, M., Khan, S., Kim, Y., Jang, J. H., & Park, J. K. (2016) · RSC Advances · doi:10.1039/c5ra26704h · Cited by 69
Nada, A. A., James, R., Shelke, N. B., Harmon, M. D., Awad, H. M., Nagarale, R. K., & Kumbar, S. G. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3292 · Cited by 64
Self-citationNovel 3D printed alginate–BFP1 hybrid scaffolds for enhanced bone regeneration
Heo, E. Y., Ko, N. R., Bae, M. S., Lee, S. J., Choi, B., Kim, J. H., Kim, H. K., Park, S. A., & Kwon, I. K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.09.003 · Cited by 64
Graphene Oxide Reinforced Polylactic Acid/Polyurethane Antibacterial Composites
An, X., Ma, H., Liu, B., et al. (2013) · Journal of Nanomaterials · doi:10.1155/2013/373414 · Cited by 63
“Currently, synthetic biomaterials (bioceramics and biopolymers) have been widely applied to the tissue engineering fields [2– 6].”
BackgroundEmerging nanostructured materials for musculoskeletal tissue engineering
Peng, H., Liu, X., Wang, R., Jia, F., Dong, L., & Wang, Q. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00344f · Cited by 61
Innovative Biomaterials for Tissue Engineering
Dolcimascolo, A., Calabrese, G., Sabrina Conoci, A., & Parenti, R. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.83839 · Cited by 63
Nano-hydroxyapatite/collagen composite as scaffold material for bone regeneration.
Kavitha Sri, A., Arthi, C., Neya, N. R., & Hikku, G. S. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acc99e · Cited by 57
“Even though synthetic polymers that are prepared with desired elasticity and molecular weight display promising results, they are found prone to acidic degradation that leads to the liberation of products that harm the tissue healing process [14].”
Ye, J., Shi, X., Chen, X., Xie, J., Wang, C., Yao, K., Gao, C., & Gou, Z. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21845g · Cited by 57
Bioactive Polymeric Materials for the Advancement of Regenerative Medicine
Iovene, A., Zhao, Y., Wang, S., & Amoako, K. A. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb12010014 · Cited by 58
“Among these different types of collagen, types I–IV are the most commonly used and have been used as scaffold materials for tissue engineering and regenerative medicine [12,33].”
MethodPrimary low grade B-cell lymphoma of the dura in an immunocompetent patient.
Altundag, M. K., Ozişik, Y., Yalçın, S. S., Akyol, F. H., & Uner, A. (2000) · PubMed · Cited by 50
Biodegradable polymer matrix nanocomposites for bone tissue engineering
Hasnain, M. S., Ahmad, S. A., Chaudhary, N., Hoda, M. N., & Nayak, A. K. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813740-6.00001-6 · Cited by 101
Polymeric microgels for bone tissue engineering applications – a review
Meena, L. K., Rather, H., Kedaria, D., & Vasita, R. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1570512 · Cited by 51
Ramos, D. M., Abdulmalik, S., Arul, M. R., Rudraiah, S., Laurencin, C. T., Mazzocca, A. D., & Kumbar, S. G. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4553 · Cited by 49
Self-citationHydrogel-Based Scaffolds: Advancing Bone Regeneration Through Tissue Engineering
Quintero, J. L. C., Ramos‐Payán, R., Romero-Quintana, J. G., Ayala-Ham, A. D. R., Bermúdez, M., & Aguilar-Medina, E. M. (2025) · Gels · doi:10.3390/gels11030175 · Cited by 53
Spiral Layer-by-Layer Micro-Nanostructured Scaffolds for Bone Tissue Engineering
Manoukian, O. S., Aravamudhan, A., Lee, P. C. K., et al. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00393 · Cited by 49
Self-citationWei, P., Xu, Y., Zhang, H., & Wang, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130051 · Cited by 44
Malekpour, K., Hazrati, A., Khosrojerdi, A., Roshangar, L., & Ahmadi, M. (2023) · Regenerative Therapy · doi:10.1016/j.reth.2023.10.006 · Cited by 44
“Nanocellulose-based scaffolds have also been researched for ligament, muscle, and cartilage tissue engineering [97].”
BackgroundFibronectin-tethered graphene oxide as an artificial matrix for osteogenesis
Subbiah, R., Du, P., Van, S. Y., Suhaeri, M., Hwang, M. P., Lee, K., & Park, K. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/6/065003 · Cited by 40
Regenerative Engineering of the Rotator Cuff of the Shoulder
Narayanan, G., Nair, L. S., & Laurencin, C. T. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00631 · Cited by 36
Self-citationKadkhodaie-Elyaderani, A., Lama-Odría, M. D. C. D., del Valle, L. J., & Puiggalı́, J. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232315016 · Cited by 37
“Nanocellulose-based scaffolds functionalized with Col have shown excellent adhesion and proliferation of osteoblasts together with a high alkaline phosphatase expression and, consequently, are promising materials for tissue engineering [89].”
BackgroundBiomedical Applications of Nanocellulose
Guise, C., & Fangueiro, R. M. E. S. (2016) · Rilem bookseries · doi:10.1007/978-94-017-7515-1_12 · Cited by 31
Temperature-Responsive Methylcellulose–Hyaluronic Hydrogel as a 3D Cell Culture Matrix
Mahboubian, A., Vllasaliu, D., Dorkoosh, F. A., & Stolnik, S. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00906 · Cited by 30
Tissue Engineering and Three-Dimensional Printing in Periodontal Regeneration: A Literature Review
Raveau, S., & Jordana, F. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm9124008 · Cited by 37
Ren, H., Pan, C., Liu, Y., et al. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126458 · Cited by 31
Natural polymers for bone repair
Ramírez‐Rodríguez, G. B., Patrício, T., & López, J. D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102451-5.00008-1 · Cited by 31
Ozkendir, O., Karaca, I., Cullu, S., Erdoğan, O. C., Yaşar, H. N., Dıkıcı, S., Owen, R., & Dikici, B. A. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213732 · Cited by 31
Bone Graft Substitutes for Bone Defect Regeneration. A Collective Review
Kheirallah, ., & Almeshaly, H. (2016) · International Journal of Dentistry and Oral Science · doi:10.19070/2377-8075-1600051 · Cited by 28
“1 Collagen/gelatin Biocompatible, stimulates proliferation and differentiation of cells, and poor mechanical properties [99-101].”
BackgroundZang, S., Zhuo, Q., Chang, X., Qiu, G., Wu, Z., & Yang, G. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.019 · Cited by 26
Micro‐Nanostructures of Cellulose‐Collagen for Critical Sized Bone Defect Healing
Aravamudhan, A., Ramos, D. M., Nip, J., Kalajzić, I., & Kumbar, S. G. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201700263 · Cited by 26
Self-citationGuerrero, J., Oliveira, H., Catros, S., Siadous, R., Derkaoui, S.-M., Bareille, R., Letourneur, D., & Amédée, J. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0367 · Cited by 27
Wagner, J. M., Conze, N., Lewik, G., Wallner, C., Brune, J. C., Dittfeld, S., Jaurich, H., Becerikli, M., Dadras, M., Harati, K., et al. (2019) · Journal of Molecular Medicine · doi:10.1007/s00109-019-01822-9 · Cited by 24
Natural Origin Materials for Bone Tissue Engineering
Maia, F. R., Correlo, V. M., Oliveira, J. M., & Reis, R. L. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00032-1 · Cited by 23
Scaffolds for Bone Regeneration: State of the Art
Moreno, M., Amaral, M. H., Lobo, J. M. S., et al. (2016) · Current Pharmaceutical Design · doi:10.2174/1381612822666160203114902 · Cited by 22
Miller, M. Q., McColl, L. F., Arul, M. R., et al. (2018) · JAMA Facial Plastic Surgery · doi:10.1001/jamafacial.2018.1508 · Cited by 21
Self-citationAravamudhan, A., Ramos, D. M., Jenkins, N. A., Dyment, N. A., Sanders, M. M., Rowe, D. W., & Kumbar, S. G. (2016) · RSC Advances · doi:10.1039/c6ra15363a · Cited by 20
Self-citationBiodegradable Polymers for Bone Tissue Engineering
Cortizo, M. S., & Belluzo, M. S. (2017) · Springer eBooks · doi:10.1007/978-3-319-61288-1_2 · Cited by 20
Kumar, S., Majhi, R. K., Sanyasi, S., Goswami, C., & Goswami, L. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1442444 · Cited by 20
Proteins and Poly(Amino Acids)
Saxena, T. K., Karumbaiah, L., & Valmikinathan, C. M. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396983-5.00003-x · Cited by 20
Tian, Y., Zheng, H., Zheng, G., et al. (2021) · Biomaterials Science · doi:10.1039/d1bm01657a · Cited by 17
Dao, T. T.-T., Nguyen, C. T.-H., Vu, N. B., et al. (2019) · Advances in experimental medicine and biology · doi:10.1007/5584_2019_343 · Cited by 17
Advanced Electrospun Nanofibrous Stem Cell Niche for Bone Regenerative Engineering
Hosseini, F. S., & Laurencin, C. T. (2022) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-022-00274-x · Cited by 16
Self-citationTripathy, N., Perumal, E., Ahmad, R., Song, J. E., & Khang, G. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00040-0 · Cited by 18
Costa‐Rodrigues, J., Silva, A., Santos, C. F., Almeida, M. M., Costa, M. E. V., & Fernandes, M. H. (2014) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2014.1873 · Cited by 14
Nanoengineered biomaterials for bone/dental regeneration
Kargozar, S., Milan, P. B., Baino, F., & Mozafari, M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813355-2.00002-8 · Cited by 15
Beigi, M., Safaie, N., Nasr‐Esfahani, M. H., & Kiani, A. (2019) · Scientific Reports · doi:10.1038/s41598-019-54533-z · Cited by 13
In Vitro Growth of Bioactive Nanostructured Apatites via Agar-Gelatin Hybrid Hydrogel
Deng, Y., Zhao, X., Zhou, Y., et al. (2013) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2013.1707 · Cited by 12
Musculoskeletal Regenerative Engineering: Biomaterials, Structures, and Small Molecules
James, R., & Laurencin, C. T. (2014) · Advances in Biomaterials · doi:10.1155/2014/123070 · Cited by 11
“Microspheres in the diameter range of 300–425, 600–710, and 710–800μm were fabricated into 3D porous structures via a solvent/nonsolvent sintering technique [35].”
MethodSelf-citationHarmon, M. D., James, R., Shelke, N. B., et al. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39633 · Cited by 10
Self-citationInjectable collagen/RGD systems for bone tissue engineering applications
Kung, F. (2018) · Bio-Medical Materials and Engineering · doi:10.3233/bme-171726 · Cited by 10
Bioengineering Scaffolds for Regenerative Engineering
Qian, Z., Radke, D., Jia, W., Tahtinen, M., Wang, G., & Zhao, F. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.99891-x · Cited by 12
Khan, M. N., Abıdın, Z. U., Khan, S., et al. (2023) · Wood Science and Technology · doi:10.1007/s00226-023-01512-3 · Cited by 9
“…CNC range from ideal wound dressings (de Olyveira et al. 2011; Czaja et al. 2007) to artificial tubes/vessels as potential alternatives to vascular grafts/microsurgery (Klemm et al. 2001), to ear cartilage replacements (Nimeskern et al. 2013) and bone tissue devel‑ opment (Aravamudhan et al. 2013).”
Natural and Synthetic Biopolymers in Drug Delivery and Tissue Engineering
Schneible, J. D., Daniele, M. A.-A., & Menegatti, S. (2020) · Wiley eBooks · doi:10.1002/9783527818310.ch9 · Cited by 10
Ramos, D. M., Abdulmalik, S., Arul, M. R., Sardashti, N., Banasavadi‐Siddegowda, Y., Nukavarapu, S. P., Drissi, H., & Kumbar, S. G. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.2c00243 · Cited by 8
Self-citationSize-dependent thermal decomposition and kinetics of ultrafine alkali metal styphnates
Liu, R. Y., Zhao, W., Zhang, T., et al. (2014) · RSC Advances · doi:10.1039/c4ra05947f · Cited by 7
Regenerative Engineering: From Convergence to Consilience
Laurencin, C. T., Hosseini, F. S., & Daneshmandi, L. (2024) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-024-00360-2 · Cited by 6
Self-citationDeshpande, A. P., Baburaj, M. D., Tambe, L., et al. (2021) · Journal of Indian Society of Periodontology · doi:10.4103/jisp.jisp_440_20 · Cited by 6
“[14] Bone is a discontinuously reinforced composite.”
Chen, X., Yan, J., Jiang, Y., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.826855 · Cited by 6
Current Trends in the Development of Materials for Bone Grafting and Spinal Fusion (Review)
Bokov, A., Mlyavykh, S. G., Shirokova, N. Y., Davydenko, D. V., & Orlinskaya, N. Y. (2018) · Современные технологии в медицине · doi:10.17691/stm2018.10.4.24 · Cited by 6
“To facilitate the delivery of cells and osteoinductive molecules, materials based on cellulose and collagen or collagen and alginate were also proposed [60, 61].”
BackgroundCai, Z., Fan, L., Wang, H., et al. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01654 · Cited by 5
Vasconcelos, M. O., Silva, L. A. D., Sousa-Junior, A. A., et al. (2022) · Frontiers in Nanotechnology · doi:10.3389/fnano.2022.1049599 · Cited by 5
“In this study, we prepare and characterize drug-eluting bioresorbable membranes for GTR, aiming to achieve sustained anesthetic and antimicrobial effects, thus addressing both postoperative pain and eventual sources of infection (TheinHan and Stevens, 2004; Aravamudhan et al., 2013; Kiruthika et al., 2015).”
MethodScaffolds for periodontal tissue engineering
Asa’ad, F., Monje, A., & Larsson, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102563-5.00023-x · Cited by 5
Zhang, J., Qin, W., Yue, W., Zhang, W., Zhao, Y., & Xu, G. (2025) · Drug Design Development and Therapy · doi:10.2147/dddt.s560876 · Cited by 5
“126 Furthermore, scaffolds implanted in vivo demonstrate significant osteogenic properties in critical bone defects.”
Salihu, R., Razak, S. I. A., Sani, M. H., et al. (2024) · PLoS ONE · doi:10.1371/journal.pone.0312396 · Cited by 4
Polyurethane and polyurethane/hydroxyapatite scaffold in a three‐dimensional culture system
Ghasroldasht, M. M., Mastrogiacomo, M., Akbarian, F., et al. (2022) · Cell Biology International · doi:10.1002/cbin.11878 · Cited by 4
“…which highlights the significant demand for further in vitro studies of the scaffold before using them in the clinic (Akkouch et al., 2011; Aravamudhan et al., 2013; Bae et al., 2011; Chuenjitkuntaworn et al., 2010; Costa‐Pinto et al., 2012; Cui et al., 2012; Fernandez et al., 2010;…”
BackgroundBone Regenerative Medicine and Bone Grafting
Harsini, S. M. (2018) · Open Access Journal of Veterinary Science & Research · doi:10.23880/oajvsr-16000167 · Cited by 3
Grassie, K., & Khan, Y. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823893-6.00002-4 · Cited by 3
Nanocellulose from the Appalachian Hardwood Forest and Its Potential Applications
Hassanzadeh, M. (2018) · doi:10.33915/etd.5780 · Cited by 4
Non‑isothermal crystallization kinetics of polycaprolactone-based composite membranes
Pang, J., Tan, D., Huang, C., et al. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03335-5 · Cited by 2
“and 250 mL H2O were added to the three-neck flask and kept at 80 °C under magnetic stirring for 4 h to prepare the BNCF, the detailed steps using the methodology described by previous studies [22].”
MethodIn Vivo Biocompatibility of Non-derivatized Cellulose Regenerated Using Ionic Liquids
Gould, M. L., Ratnayake, J. T., Ramesh, N., Powlay, T. J., Curnow, O. J., Staiger, M. P., & Dias, G. J. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02640-w · Cited by 3
“Nanostructured cellulose-collagen scaffolds seeded with human osteoblasts showed enhanced cell adhesion, maintenance of phenotype, significantly improved alkaline phosphatase activity (a sign of osteogenic differentiation) and better mineral deposition compared to control polyester scaffolds with identical pore proper…”
BackgroundStereological assessment of engineered tissues and their scaffolds
Dockery, P., & Biggs, M. J. P. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-087-3.00008-0 · Cited by 2
Pseudoarthrosis: search for treatment methods of delayed consolidation and non-union
Самодай, В. Г., Starikov, A. O., Калашников, П. И., et al. (2022) · Medical news of the North Caucasus · doi:10.14300/mnnc.2022.17028 · Cited by 1
Bone tissue engineering, scaffold requirements and the utilization of natural polymers
Fadahunsi, A. A., Johnson, M., Rahman, S., & Mason, M. D. (2026) · Cellulose · doi:10.1007/s10570-026-06985-6 · Cited by 2
The Evolution and Application of Regenerative Engineering
James, R., & Laurencin, C. T. (2014) · MRS Proceedings · doi:10.1557/opl.2014.804 · Cited by 1
Self-citationAptamer-Mediated Selective Protein Affinity to Improve Scaffold Biocompatibility
Parisi, L., Galli, C., Elviri, L., Bianchera, A., Lagonegro, P., Lumetti, S., Manfredi, E., & Macaluso, G. M. (2016) · InTech eBooks · doi:10.5772/63265 · Cited by 1
“Together with collagen, chitosan, alginate, and cellulose are promising biomaterial for bone tissue engineering applications [27–30].”
Background
Metadata
- Authors
- Aravamudhan, A., Ramos, D. M., Nip, J., Harmon, M. D., James, R., Deng, M., Laurencin, C. T., Yu, X., & Kumbar, S. G.
- Affiliations
- UConn Health (US)
- ORCID
- Venue
- Journal of Biomedical Nanotechnology
- Publisher
- American Scientific Publishers
- Published
- 2013-04-01
- Volume
- 9
- Issue
- 4
- Pages
- 719-731
- ISSN
- 1550-7033 (ISSN-L)
- OpenAlex
- W1967212772
- Cited by
- 113
- References
- 0
- Citations by year
- 2026: 6 · 2025: 3 · 2024: 4 · 2023: 5 · 2022: 14 · 2021: 8 · 2020: 5 · 2019: 10 · 2018: 12 · 2017: 5 · 2016: 13 · 2015: 2 · 2014: 20 · 2013: 5
- FWCI
- 7.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomedical Nanotechnology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- bone tissue engineering, cellulose, collagen, human osteoblasts, osteogenic differentiation, alkaline phosphatase, mineral deposition, porous scaffolds, compressive modulus, extracellular matrix mimicry
- MeSH terms
- Alkaline Phosphatase, Bone and Bones, Cell Survival, Cells, Cultured, Cellulose, Collagen, Humans, Microspheres, Minerals, Osteoblasts, Particle Size, Solvents, Porosity, Compressive Strength, Tissue Engineering, Cell Proliferation, Tissue Scaffolds, Nanofibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
