The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs
Abstract
Cantilevered piezoelectric energy harvesters have been extensively investigated in the literature of energy harvesting. As an alternative to conventional cantilevered beams, this article presents the L-shaped beam-mass structure as a new piezoelectric energy harvester configuration. This structure can be tuned to have the first two natural frequencies relatively close to each other, resulting in the possibility of a broader band energy harvesting system. This article describes the important features of the L-shaped piezoelectric energy harvester configuration and develops a linear distributed parameter model for predicting the electromechanically coupled voltage response and displacement response of the harvester structure. After deriving the coupled distributed parameter model, a case study is presented to investigate the electrical power generation performance of the L-shaped energy harvester. A direct application of the L-shaped piezoelectric energy harvester configuration is proposed for use as landing gears in unmanned air vehicle applications and a case study is presented where the results of the L-shaped — energy harvester — landing gear are favorably compared against the published experimental results of a curved beam configuration used for the same purpose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nayfeh, A. H., Mook, D. T., & Holmes, P. (1980) · Journal of Applied Mechanics · doi:10.1115/1.3153771 · Cited by 4,652
Dynamics of structures: theory and applications to earthquake engineering
(1995) · Choice Reviews Online · doi:10.5860/choice.33-0948 · Cited by 4,258
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Reduction of stiffness and mass matrices
GUYAN, R. J. (1965) · AIAA Journal · doi:10.2514/3.2874 · Cited by 2,642
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
Self-citationAnalysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters
Erturk, A., & Inman, D. J. (2008) · Journal of Vibration and Acoustics · doi:10.1115/1.2890402 · Cited by 1,249
Self-citationCook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Estimation of Electric Charge Output for Piezoelectric Energy Harvesting
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Strain · doi:10.1111/j.1475-1305.2004.00120.x · Cited by 750
Self-citationOn Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters
Erturk, A., & Inman, D. J. (2008) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x07085639 · Cited by 653
Self-citationMEMS electrostatic micropower generator for low frequency operation
Mitcheson, P. D., Miao, P., Stark, B. H., Yeatman, E. M., Holmes, A. S., & Green, T. C. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.04.026 · Cited by 593
Review of Microscale Magnetic Power Generation
Arnold, D. P. (2007) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2007.906150 · Cited by 549
橋の耐震補強における超弾性銅-アルミニウム-ベリリウム合金線材の低温物理特性
Yunfeng, Z., Camilleri, J. A., & Songye, Z. (2008) · Smart Materials and Structures · Cited by 503
Damping as a result of piezoelectric energy harvesting
Lesieutre, G. A., Ottman, G. K., & Hofmann, H. F. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00210-4 · Cited by 300
Generation and Storage of Electricity from Power Harvesting Devices
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05047210 · Cited by 269
Self-citationErturk, A., Tarazaga, P. A., Farmer, J. R., & Inman, D. J. (2009) · Journal of Vibration and Acoustics · doi:10.1115/1.2981094 · Cited by 211
Self-citationBaker, J., Roundy, S., & Wright, P. (2005) · 3rd International Energy Conversion Engineering Conference · doi:10.2514/6.2005-5617 · Cited by 211
A piezoelectric power harvester with adjustable frequency through axial preloads
Hu, Y., Xue, H., & Hu, H. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/5/054 · Cited by 141
Investigation of an energy harvesting small unmanned air vehicle
Magoteaux, K. C., Sanders, B., & Sodano, H. A. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.775851 · Cited by 39
Expanding Mission Capabilities of Unmanned Systems Through the Collection of Energy in the Field
Qidwai, M. A., Thomas, J. P., & Kellogg, J. C. (2005) · 3rd International Energy Conversion Engineering Conference · doi:10.2514/6.2005-5532 · Cited by 3
Cited by
A comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
Issues in mathematical modeling of piezoelectric energy harvesters
Erturk, A., & Inman, D. J. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/6/065016 · Cited by 480
Self-citationA novel two-degrees-of-freedom piezoelectric energy harvester
Wu, H., Tang, L., Yang, Y., & Soh, C. K. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12457254 · Cited by 253
Metadata
- Authors
- Erturk, A., Renno, J. M., & Inman, D. J.
- Venue
- Journal of Intelligent Material Systems and Structures
- Publisher
- SAGE Publications
- Published
- 2008-11-28
- Volume
- 20
- Issue
- 5
- Pages
- 529-544
- ISSN
- 1045-389X (ISSN-L)
- 1530-8138
- OpenAlex
- W2142796682
- Cited by
- 432
- References
- 26
- FWCI
- 19.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.