Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 754

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Cold spray coating: review of material systems and future perspectives

Open access
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., Dao, M.·2014·Surface Engineering
DOI 10.1179/1743294414y.0000000270
Open this paper in CoChat — free account

Abstract

Cold gas dynamic spray or simply cold spray (CS) is a process in which solid powders are accelerated in a de Laval nozzle toward a substrate. If the impact velocity exceeds a threshold value, particles endure plastic deformation and adhere to the surface. Different materials such as metals, ceramics, composites and polymers can be deposited using CS, creating a wealth of interesting opportunities towards harvesting particular properties. CS is a novel and promising technology to obtain surface coating, offering several technological advantages over thermal spray since it utilizes kinetic rather than thermal energy for deposition. As a result, tensile residual stresses, oxidation and undesired chemical reactions can be avoided. Development of new material systems with enhanced properties covering a wide range of required functionalities of surfaces and interfaces, from internal combustion engines to biotechnology, brought forth new opportunities to the cold spraying with a rich variety of material combinations. As applications multiply, the total number of studies on this subject is expanding rapidly and it is worth summarizing the current state of knowledge. This review covers different material systems that have been studied up to now with an emphasis on potential innovative applications. This includes metallic, ceramic and metal matrix composite (MMC) coatings and their applications. Polymer (both as substrate and coating) and metal embedment in the polymer are also covered. CS has emerged as a promising process to deposit nanostructured materials without significantly altering their microstructure whereas many traditional consolidation processes do. Relevant material systems containing nanostructured powders are also considered. A critical discussion on the future of this technology is provided at the final part of the paper focusing on the microstructural bonding mechanisms for those relatively less explored material systems. These include MMCs involving more than one constituent, ceramics, polymers and nanostructured powders. Future investigations are suggested especially to quantitatively link the process parameters and the behaviour of the material systems of interest during impact.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1179/1743294414y.0000000270

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Research works printed but not linked: 135

  1. Champagne VK: ‘The cold spray materials deposition process: fundamentals and applications’, 2007, Cambridge, Woodhead Publishing Limited. · DOI · Paper page
  2. Papyrin A, 2001, Adv. Mater. Process., 159, 49
  3. Karthikeyan J, 2005, Adv. Mater. Process., 163, 33
  4. Xiong T.Y., 2001, Corros. Sci. Protect. Technol., 13, 267
  5. 10.1080/10667857.2003.11753015 · doi:10.1080/10667857.2003.11753015
  6. Zhu X, 2004, Tianranqi Gongye/Natural Gas Ind., 24, 12
  7. Vlcek J, 2005, Einsatzmöglichkeiten kaltgasgespritzten Schichten Luft- Raumf., 96, 684
  8. Gabel H, 2004, Adv. Mater. Process., 162, 47
  9. 10.1016/j.surfcoat.2007.02.033 · DOI
  10. Akedo J, 2008, Synthesiol. Engl. Ed., 1, 121
  11. 10.1007/s11666-008-9203-3 · doi:10.1007/s11666-008-9203-3
  12. 10.1361/105996399770350250 · DOI · Paper page
  13. 10.1361/105996302770348682 · DOI · Paper page
  14. 10.1016/S0169-4332(03)00643-3 · DOI · Paper page
  15. 10.1016/j.matdes.2004.03.008 · DOI · Paper page
  16. 10.1016/0749-6419(92)90032-8 · doi:10.1016/0749-6419(92)90032-8
  17. 10.1016/j.actamat.2005.10.005 · DOI · Paper page
  18. 10.1016/j.surfcoat.2011.05.038 · DOI
  19. 10.1016/j.apsusc.2010.03.008 · DOI
  20. 10.1016/j.msea.2007.09.010 · DOI
  21. 10.1361/105996306X108093 · DOI · Paper page
  22. 10.1007/s11666-009-9427-x · DOI
  23. 10.1361/10599630522738 · doi:10.1361/10599630522738
  24. 10.1007/s11661-012-1098-4 · doi:10.1007/s11661-012-1098-4
  25. 10.5516/NET.2011.43.6.557 · doi:10.5516/net.2011.43.6.557
  26. 10.1007/s11666-009-9454-7 · DOI · Paper page
  27. 10.2320/matertrans.MRA2008223 · DOI
  28. Karthikeyan J, 2005, Adv. Mater. Process., 163, 49
  29. 10.1361/105996305X59332 · doi:10.1361/105996305x59332
  30. 10.1016/j.scriptamat.2006.04.041 · doi:10.1016/j.scriptamat.2006.04.041
  31. 10.1007/s11666-012-9790-x · DOI
  32. 10.1007/s11666-007-9060-5 · doi:10.1007/s11666-007-9060-5
  33. Villafuerte J, 2007, Adv. Mater. Process., 165, 53
  34. Fletcher MCSA, 2008, C.S.A. (hidegen szórt alumínium): Egy új generációs bevonat a magas homérsékletu területek korrózióvédelmére, 48, 50
  35. 10.1016/j.scriptamat.2009.03.002 · DOI
  36. Ghelichi R, 2012, Acta Materialia, 60, 6555
  37. 10.1007/s11666-011-9675-4 · doi:10.1007/s11666-011-9675-4
  38. 10.1007/978-3-319-00765-6_8 · DOI
  39. 10.1016/j.surfcoat.2005.04.033 · DOI
  40. 10.1007/s11666-010-9527-7 · DOI
  41. Liu Y, 2006, Special Cast. Nonferr. Alloys, 26, 204
  42. 10.1361/105996306X147108 · doi:10.1361/105996306x147108
  43. 10.1361/105996306X108219 · DOI · Paper page
  44. 10.1016/j.surfcoat.2010.04.016 · doi:10.1016/j.surfcoat.2010.04.016
  45. 10.4028/www.scientific.net/AMR.89-91.639 · doi:10.4028/www.scientific.net/amr.89-91.639
  46. 10.1016/j.surfcoat.2012.11.067 · DOI
  47. 10.1016/j.surfcoat.2010.03.061 · doi:10.1016/j.surfcoat.2010.03.061
  48. Wong W, 2012, J. Thermal Spray Technol., 1
  49. 10.1007/s11666-009-9455-6 · DOI
  50. Bala N, Singh H and Prakash S: ‘High temperature corrosion behavior of cold spray Ni-20Cr coating on boiler steel in molten salt environment at 900°C’, Proc. Int. Thermal Spray Conf., Las Vegas, NV, USA, August 2009, ASM International, 679–684. · doi:10.31399/asm.cp.itsc2009p0679
  51. 10.1080/10426914.2011.648690 · DOI
  52. 10.1016/j.surfcoat.2010.08.146 · DOI
  53. 10.1007/s11666-008-9281-2 · doi:10.1007/s11666-008-9281-2
  54. 10.1016/j.surfcoat.2010.02.052 · DOI
  55. Moridi A, MRS Bulletin
  56. 10.1007/s11666-011-9716-z · DOI
  57. Kiz MM, 2009, Ukrain. J. Phys., 54, 594
  58. 10.1016/j.surfcoat.2010.03.043 · DOI
  59. 10.1007/s11666-010-9601-1 · doi:10.1007/s11666-010-9601-1
  60. Moridi A, Azadi M and Farrahi GH: ‘Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects’, Surf. Coat. Technol . 2012 (article in press).
  61. 10.1016/j.surfcoat.2008.09.014 · DOI
  62. 10.1016/j.actamat.2007.01.052 · DOI · Paper page
  63. 10.1016/S1359-6454(99)00300-6 · DOI · Paper page
  64. 10.2320/matertrans1989.32.609 · doi:10.2320/matertrans1989.32.609
  65. 10.1063/1.110520 · DOI · Paper page
  66. 10.1126/science.1067453 · DOI
  67. Wang C.-C, 2013, Proc. National Acad. Sci. USA, 1
  68. 10.1007/s11666-012-9750-5 · DOI
  69. 10.1088/0022-3727/42/8/082004 · doi:10.1088/0022-3727/42/8/082004
  70. 10.1007/s11666-011-9652-y · DOI
  71. 10.1016/j.surfcoat.2004.10.133 · DOI
  72. 10.1007/s11666-010-9516-x · doi:10.1007/s11666-010-9516-x
  73. 10.1007/s11666-009-9407-1 · doi:10.1007/s11666-009-9407-1
  74. Liang Y, 2011, Acta Metall. Sin. (Engl. Lett.), 24, 190
  75. 10.1016/j.surfcoat.2012.11.061 · DOI
  76. 10.1016/j.scriptamat.2003.08.023 · DOI
  77. 10.1007/s11666-007-9145-1 · DOI
  78. 10.1016/j.surfcoat.2012.06.050 · doi:10.1016/j.surfcoat.2012.06.050
  79. 10.1016/j.surfcoat.2012.01.031 · doi:10.1016/j.surfcoat.2012.01.031
  80. 10.1007/s11666-007-9086-8 · DOI
  81. 10.1007/s11666-010-9571-3 · doi:10.1007/s11666-010-9571-3
  82. 10.1016/j.apsusc.2005.03.148 · doi:10.1016/j.apsusc.2005.03.148
  83. 10.1361/10599630419355 · doi:10.1361/10599630419355
  84. 10.1016/j.surfcoat.2009.07.032 · doi:10.1016/j.surfcoat.2009.07.032
  85. 10.1007/s11666-010-9491-2 · DOI
  86. 10.1016/j.surfcoat.2010.06.008 · DOI
  87. Miguel JM, 2011, Recubr. Mater. Compuest. Metal-Cerám. Obten. Nuevas Tecnol. Proyecc. Térm.: Proyecc. (CGS) Resist. Desg., 47, 390
  88. 10.1007/s11666-011-9729-7 · DOI
  89. 10.1016/j.surfcoat.2004.04.058 · DOI · Paper page
  90. 10.1016/j.surfcoat.2007.05.095 · DOI
  91. 10.1016/j.actamat.2012.10.011 · DOI
  92. 10.1361/105996306X124400 · DOI
  93. Kim HJ, 2007, J. Korean Inst. Met. Mater., 45, 409
  94. 10.1016/j.compscitech.2008.11.015 · DOI
  95. 10.1016/S1452-3981(23)14730-4 · doi:10.1016/s1452-3981(23)14730-4
  96. 10.1016/j.surfcoat.2013.03.036 · DOI
  97. 10.1007/s11666-012-9774-x · doi:10.1007/s11666-012-9774-x
  98. 10.1002/jbm.1056 · DOI · Paper page
  99. Choudhuri A, 2009, Proc. Int. Thermal Spray Conf., 391
  100. 10.1016/j.surfcoat.2012.02.021 · DOI
  101. 10.1016/j.surfcoat.2011.12.010 · doi:10.1016/j.surfcoat.2011.12.010
  102. 10.1361/105996304523791 · DOI
  103. 10.1016/j.apsusc.2007.12.016 · doi:10.1016/j.apsusc.2007.12.016
  104. 10.1007/s11666-010-9563-3 · DOI
  105. 10.1007/s11666-010-9520-1 · DOI
  106. 10.1016/j.surfcoat.2011.09.043 · DOI
  107. Noorakma ACW, 2013, J. Mater. Eng. Perform., 1
  108. 10.1016/j.vacuum.2011.06.026 · doi:10.1016/j.vacuum.2011.06.026
  109. 10.1007/s11666-012-9843-1 · DOI
  110. 10.1016/j.vacuum.2013.01.023 · doi:10.1016/j.vacuum.2013.01.023
  111. 10.1016/j.surfcoat.2008.06.184 · doi:10.1016/j.surfcoat.2008.06.184
  112. 10.1016/j.surfcoat.2010.08.128 · DOI · Paper page
  113. 10.1016/j.surfcoat.2011.07.005 · doi:10.1016/j.surfcoat.2011.07.005
  114. 10.2320/matertrans.T-M2011807 · DOI
  115. 10.1016/j.actbio.2012.11.030 · DOI · Paper page
  116. 10.1016/j.matlet.2013.04.115 · doi:10.1016/j.matlet.2013.04.115
  117. 10.1016/j.surfcoat.2006.06.016 · doi:10.1016/j.surfcoat.2006.06.016
  118. 10.1007/s11666-012-9743-4 · DOI
  119. 10.1080/08927014.2012.670849 · doi:10.1080/08927014.2012.670849
  120. 10.1016/j.surfcoat.2012.11.023 · DOI
  121. 10.1080/08927014.2012.741682 · doi:10.1080/08927014.2012.741682
  122. Gleiter H: ‘Nanocrystalline materials’, 1990, 33, 223–315. · DOI · Paper page
  123. 10.1016/j.actamat.2003.08.032 · DOI
  124. 10.1016/j.actamat.2007.01.038 · DOI
  125. 10.1016/S0079-6425(99)00010-9 · DOI · Paper page
  126. 10.1007/s11661-005-0182-4 · DOI
  127. 10.1007/s11666-008-9180-6 · doi:10.1007/s11666-008-9180-6
  128. 10.1361/105996306X107995 · DOI
  129. Richer P, 2011, Proc. ASME Turbo Expo, 4, 737
  130. Goupil G, 2013, TMS Light Met., 1283
  131. 10.1007/s11666-010-9595-8 · doi:10.1007/s11666-010-9595-8
  132. 10.1016/j.actamat.2007.04.044 · doi:10.1016/j.actamat.2007.04.044
  133. 10.1007/s11666-007-9089-5 · doi:10.1007/s11666-007-9089-5
  134. 10.1088/0022-3727/46/19/195301 · doi:10.1088/0022-3727/46/19/195301
  135. 10.1016/j.surfcoat.2010.08.084 · DOI

Cited by

See all 754

Metadata

Authors
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., & Dao, M.
Venue
Surface Engineering
Publisher
SAGE Publications
Published
2014-06
Volume
30
Issue
6
Pages
369-395
ISSN
  • 0267-0844 (ISSN-L)
  • 1743-2944
DOI
10.1179/1743294414y.0000000270
OpenAlex
W2142472921
Cited by
754
References
2
FWCI
54.84
Type
journal article
Language
en
Open access
green
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Cold spray coating: review of material systems and future perspectives. https://app.cochat.ai/papers/10.1179/1743294414y.0000000270
The paper
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., & Dao, M. (2014). Cold spray coating: review of material systems and future perspectives. Surface Engineering. https://doi.org/10.1179/1743294414y.0000000270

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.