Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900°C
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The objective of this work was to study the impact of water vapour on the corrosion behaviour of the austenitic stainless steel 353MA at 700 and 900°C through a detailed microstructural characterisation of the oxide scales formed, after 168 hours, in O2 and O2 with 40% H2O. The oxidized samples were investigated by scanning electron microscope/energy dispersive X-ray, focused ion beam and transmission electron microscope/energy dispersive X-ray. At 700°C 353MA forms a Cr-rich protective (Fe,Cr)2O3 oxide scale, with some silica at the oxide/metal interface. Breakaway oxidation occurs in H2O/O2 mixtures because the oxide scale is depleted in Cr due to the formation of CrO2(OH)2(g). However, the microstructural investigation indicated that a healing Cr-rich oxide layer formed beneath the Fe-rich oxide after some time. This could be a result of the high Cr/Fe ratio of 353MA. The behaviour at 900°C was different. In spite of the loss of Cr from the oxide scale, breakaway oxidation did not occur, i.e. the oxide scale remained protective. The microstructural investigation showed a thick, almost continuous silica layer at the oxide/metal interface, which may act as a diffusion barrier at the higher temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325
Self-citationAsteman, H., Svensson, J.-E., Johansson, L.-G., & Norell, M. (1999) · Oxidation of Metals · doi:10.1023/a:1018875024306 · Cited by 304
Self-citationThe microstructure of the base oxide on 304L steel
Eu Tang, J., Halvarsson, M., Asteman, H., & Svensson, J.-E. (2001) · Micron · doi:10.1016/s0968-4328(00)00087-1 · Cited by 33
Self-citation
Cited by
Pettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117
Self-citationPujilaksono, B., Jonsson, T., Heidari, H., Halvarsson, M., Svensson, J.-E., & Johansson, L.-G. (2011) · Oxidation of Metals · doi:10.1007/s11085-010-9229-z · Cited by 109
Self-citationOxidation of Fe–10Cr in O2 and in O2+H2O environment at 600°C: A microstructural investigation
Jonsson, T., Pujilaksono, B., Heidari, H., Liu, F., Svensson, J.-E., Halvarsson, M., & Johansson, L.-G. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.016 · Cited by 64
Self-citationEklund, J., Jönsson, B., Persdotter, A., Liske, J., Svensson, J.-E., & Jonsson, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.09.004 · Cited by 55
Self-citationEklund, J., Persdotter, A., Hanif, I., Bigdeli, S., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109584 · Cited by 23
Self-citationThe long-term corrosion behavior of fecral(Si) alloys after breakaway oxidation at 600 °C
Eklund, J., Persdotter, A., Ssenteza, V., & Jonsson, T. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111155 · Cited by 22
Self-citationBigdeli, S., Kjellqvist, L., Naraghi, R., Höglund, L., Larsson, H., & Jonsson, T. (2021) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-021-00893-x · Cited by 19
Self-citationEklund, J., Paz, M. D., Jönsson, B., Liske, J., Svensson, J., & Jonsson, T. (2019) · Materials and Corrosion · doi:10.1002/maco.201810618 · Cited by 18
Self-citation
Metadata
- Authors
- Jonsson, T., Canovic, S., Liu, F., Asteman, H., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M.
- Venue
- Materials at High Temperatures
- Publisher
- Informa UK Limited
- Published
- 2005-01
- Volume
- 22
- Issue
- 3-4
- Pages
- 231-243
- ISSN
- 0960-3409 (ISSN-L)
- 1878-6413
- OpenAlex
- W2081825441
- Cited by
- 31
- References
- 3
- FWCI
- 0.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.