CoChat

RNase H-dependent PCR (rhPCR): improved specificity and single nucleotide polymorphism detection using blocked cleavable primers

Open access

The DOI matches its Crossref record; 53 of the 57 references it cites were found in a registry or an index.

Abstract

Background: The polymerase chain reaction (PCR) is commonly used to detect the presence of nucleic acid sequences both in research and diagnostic settings. While high specificity is often achieved, biological requirements sometimes necessitate that primers are placed in suboptimal locations which lead to problems with the formation of primer dimers and/or misamplification of homologous sequences. Results: Pyrococcus abyssi (P.a.) RNase H2 was used to enable PCR to be performed using blocked primers containing a single ribonucleotide residue which are activated via cleavage by the enzyme (rhPCR). Cleavage occurs 5'-to the RNA base following primer hybridization to the target DNA. The requirement of the primer to first hybridize with the target sequence to gain activity eliminates the formation of primer-dimers and greatly reduces misamplification of closely related sequences. Mismatches near the scissile linkage decrease the efficiency of cleavage by RNase H2, further increasing the specificity of the assay. When applied to the detection of single nucleotide polymorphisms (SNPs), rhPCR was found to be far more sensitive than standard allele-specific PCR. In general, the best discrimination occurs when the mismatch is placed at the RNA:DNA base pair. Conclusion: rhPCR eliminates the formation of primer dimers and markedly improves the specificity of PCR with respect to off-target amplification. These advantages of the assay should find utility in challenging qPCR applications such as genotyping, high level multiplex assays and rare allele detection.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1186/1472-6750-11-80

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Coupled reaction scheme for PCR using blocked primers activated by cleavage with RNase H2 (rhPCR). PCR primers are designed to be incapable of extension by DNA polymerase and contain a single ribonucleotide residue near the 3'-end. Hybridization of primer to template forms a substrate for RNase H2, which will cleave the primer 5'-to the RNA base leaving a DNA oligonucleotide with a 3'-OH capable of priming DNA synthesis. The assay can be performed using either 2- or 3-step PCR with anneal/extend times as short as 30 seconds.
Figure 1 Coupled reaction scheme for PCR using blocked primers activated by cleavage with RNase H2 (rhPCR). PCR primers are designed to be incapable of extension by DNA polymerase and contain a single ribonucleotide residue near the 3'-end. Hybridization of primer to template forms a substrate for RNase H2, which will cleave the primer 5'-to the RNA base leaving a DNA oligonucleotide with a 3'-OH capable of priming DNA synthesis. The assay can be performed using either 2- or 3-step PCR with anneal/extend times as short as 30 seconds.CC BY · PubMed Central
Figure 2 Thermal stability and temperature dependence of P.a. RNase H2 activity. A. Aliquots of P.a. RNase H2 were pre-incubated at 95°C for the indicated times and then tested for activity with the heteroduplex substrate S-rC 14-1-15 (labeled with 32P). Cleavage reactions were allowed to proceed for 20 minutes at 70°C. Reaction products were separated by denaturing PAGE and visualized by phosphorimaging. Percent cleavage of the substrate (Y-axis) is shown plotted against pre-incubation time at 95°C (X-axis). Assays were run in triplicate for each pre-incubation time point. B. 32P-labeled S-rC 14-1-15 was incubated in the absence or presence of 0.25 mU of recombinant P.a. RNase H2 for 20 minutes at 30°C, 40°C, 50°C, 60°C, or 70°C. Reactions were stopped with the addition of EDTA and cleavage products were separated by denaturing PAGE and visualized by phosphorimaging. A gel image is shown. Cleavage reactions were run in triplicate and no enzyme controls were run once. C. The phosphor gel image from panel B above was quantified and triplicate data points averaged. The percent cleavage of substrate (Y-axis) is shown plotted against reaction temperature (X-axis).
Figure 2 Thermal stability and temperature dependence of P.a. RNase H2 activity. A. Aliquots of P.a. RNase H2 were pre-incubated at 95°C for the indicated times and then tested for activity with the heteroduplex substrate S-rC 14-1-15 (labeled with 32P). Cleavage reactions were allowed to proceed for 20 minutes at 70°C. Reaction products were separated by denaturing PAGE and visualized by phosphorimaging. Percent cleavage of the substrate (Y-axis) is shown plotted against pre-incubation time at 95°C (X-axis). Assays were run in triplicate for each pre-incubation time point. B. 32P-labeled S-rC 14-1-15 was incubated in the absence or presence of 0.25 mU of recombinant P.a. RNase H2 for 20 minutes at 30°C, 40°C, 50°C, 60°C, or 70°C. Reactions were stopped with the addition of EDTA and cleavage products were separated by denaturing PAGE and visualized by phosphorimaging. A gel image is shown. Cleavage reactions were run in triplicate and no enzyme controls were run once. C. The phosphor gel image from panel B above was quantified and triplicate data points averaged. The percent cleavage of substrate (Y-axis) is shown plotted against reaction temperature (X-axis).CC BY · PubMed Central
Figure 3 Differential cleavage of mismatched substrates by P.a. RNase H2. A 30mer oligonucleotide S-rC 14-1-15 having a single RNA base (rC) was paired with its perfect match DNA complement (shown) or oligonucleotides having a single base mismatch at one of the 11 positions identified in bold. Every possible mismatch at these locations was tested. DNA bases are uppercase and RNA bases are lowercase. 32P-labeled duplexes were incubated with RNase H2 at 70°C. Reaction products were separated by PAGE, and the extent of cleavage of the substrate was quantified by phosphorimaging. The percent cleavage of each of the mismatched duplexes relative to the perfect match (= 100%) are plotted. The sequence of the invariant RNA-containing top strand is shown above the plot with each mismatch base aligned above its associated data point in the bar graph. The site of cleavage by RNase H2 is indicated by the arrow.
Figure 3 Differential cleavage of mismatched substrates by P.a. RNase H2. A 30mer oligonucleotide S-rC 14-1-15 having a single RNA base (rC) was paired with its perfect match DNA complement (shown) or oligonucleotides having a single base mismatch at one of the 11 positions identified in bold. Every possible mismatch at these locations was tested. DNA bases are uppercase and RNA bases are lowercase. 32P-labeled duplexes were incubated with RNase H2 at 70°C. Reaction products were separated by PAGE, and the extent of cleavage of the substrate was quantified by phosphorimaging. The percent cleavage of each of the mismatched duplexes relative to the perfect match (= 100%) are plotted. The sequence of the invariant RNA-containing top strand is shown above the plot with each mismatch base aligned above its associated data point in the bar graph. The site of cleavage by RNase H2 is indicated by the arrow.CC BY · PubMed Central
Figure 4 Real-time amplification plots comparing the performance of blocked-cleavable primers (rhPCR) with unmodified primers. Unmodified control primers (black) and "rDDDDx" blocked-cleavable primers (blue) were used to detect a synthetic oligonucleotide amplicon in real-time qPCR format. Amplification reactions were performed in the absence of RNase H2 (left panels) or in the presence of 2.6 mU of RNase H2 (right panels). Detection was done using either SYBR® Green (top panels) or a 5'-nuclease assay with a dual-labeled hydrolysis probe (bottom panels).
Figure 4 Real-time amplification plots comparing the performance of blocked-cleavable primers (rhPCR) with unmodified primers. Unmodified control primers (black) and "rDDDDx" blocked-cleavable primers (blue) were used to detect a synthetic oligonucleotide amplicon in real-time qPCR format. Amplification reactions were performed in the absence of RNase H2 (left panels) or in the presence of 2.6 mU of RNase H2 (right panels). Detection was done using either SYBR® Green (top panels) or a 5'-nuclease assay with a dual-labeled hydrolysis probe (bottom panels).CC BY · PubMed Central
Figure 5 Elimination of primer-dimer artifacts with rhPCR. A 242 bp HCV amplicon known to produce primer-dimer artifacts was used to compare the specificity of unmodified control (U) and "rDDDDx" blocked-cleavable (B) primers. M = marker lane (bp, double-stranded). PCR assays were run without (left) or with (right) RNase H2 and included reactions with primers alone, primers plus the synthetic HCV target, or primers and the synthetic HCV target with high complexity rat cDNA. Reaction products were separated by non-denaturing PAGE, fluorescently stained, and visualized by UV excitation.
Figure 5 Elimination of primer-dimer artifacts with rhPCR. A 242 bp HCV amplicon known to produce primer-dimer artifacts was used to compare the specificity of unmodified control (U) and "rDDDDx" blocked-cleavable (B) primers. M = marker lane (bp, double-stranded). PCR assays were run without (left) or with (right) RNase H2 and included reactions with primers alone, primers plus the synthetic HCV target, or primers and the synthetic HCV target with high complexity rat cDNA. Reaction products were separated by non-denaturing PAGE, fluorescently stained, and visualized by UV excitation.CC BY · PubMed Central
Figure 6 Increased specificity of rhPCR with complex DNA samples. A PCR assay specific for the human HRAS gene was used to compare the specificity of "rDDDDx" blocked-cleavable primers (rhPCR) with unmodified control primers to amplify the desired sequences in human cDNA versus mismatched sequences in rat cDNA. A. Amplification plots are shown for SYBR® Green qPCR assays run with unmodified control primers (left panel) or blocked-cleavable primers (right panel). Reactions with human cDNA (HeLa) are shown in black and reactions with rat cDNA (spinal cord) are shown in blue. The concentration of RNase H2 was 1.3 mU per 10 μL and the anneal/extension time was 90 seconds. B. The human HRAS-specific amplification primers are shown aligned with the homologous sequence in the rat Hras gene. Unmodified control primers are shown on the left and blocked-cleavable primers are shown on the right. DNA bases are black uppercase and RNA bases are red lowercase. "x" is a propanediol C3 spacer.
Figure 6 Increased specificity of rhPCR with complex DNA samples. A PCR assay specific for the human HRAS gene was used to compare the specificity of "rDDDDx" blocked-cleavable primers (rhPCR) with unmodified control primers to amplify the desired sequences in human cDNA versus mismatched sequences in rat cDNA. A. Amplification plots are shown for SYBR® Green qPCR assays run with unmodified control primers (left panel) or blocked-cleavable primers (right panel). Reactions with human cDNA (HeLa) are shown in black and reactions with rat cDNA (spinal cord) are shown in blue. The concentration of RNase H2 was 1.3 mU per 10 μL and the anneal/extension time was 90 seconds. B. The human HRAS-specific amplification primers are shown aligned with the homologous sequence in the rat Hras gene. Unmodified control primers are shown on the left and blocked-cleavable primers are shown on the right. DNA bases are black uppercase and RNA bases are red lowercase. "x" is a propanediol C3 spacer.CC BY · PubMed Central
Figure 7 Mismatch discrimination using blocked-cleavable primers with an RNA:DNA base-pair mismatch versus standard unmodified allele-specific PCR primers. Four synthetic 103 base oligonucleotide targets were employed where a single base was varied (A, C, G, or T) within the primer binding site. For each DNA target, a single common For primer was paired with four different "rDDDDx" blocked-cleavable Rev primers, varying the RNA base (A), or with four unmodified allele-specific primers terminating in a different 3'-DNA base (B). Amplification reactions were performed in real-time mode using SYBR® Green detection; all reactions were run in triplicate. ΔCq values are shown in the tables and represent the difference between the Cq value for the allele-specific primer for each template and the Cq value for the perfect match template. The concentration of RNase H2 was 1.3 mU per 10 μL.
Figure 7 Mismatch discrimination using blocked-cleavable primers with an RNA:DNA base-pair mismatch versus standard unmodified allele-specific PCR primers. Four synthetic 103 base oligonucleotide targets were employed where a single base was varied (A, C, G, or T) within the primer binding site. For each DNA target, a single common For primer was paired with four different "rDDDDx" blocked-cleavable Rev primers, varying the RNA base (A), or with four unmodified allele-specific primers terminating in a different 3'-DNA base (B). Amplification reactions were performed in real-time mode using SYBR® Green detection; all reactions were run in triplicate. ΔCq values are shown in the tables and represent the difference between the Cq value for the allele-specific primer for each template and the Cq value for the perfect match template. The concentration of RNase H2 was 1.3 mU per 10 μL.CC BY · PubMed Central
Figure 8 Application of rhPCR to determine genotype for 31 individuals at the SMAD7 rs4939827 SNP Locus. Human DNA samples from 31 individuals comprising 10 C/C homozygotes (circles), 10 T/T homozygotes (squares), and 11 C/T heterozygotes (triangles) were obtained from the Coriell Cell Repository and genotypes were determined using rhPCR. Reactions were run in triplicate using 2 ng of genomic DNA with SYBR® Green detection. Separate reactions using unmodified non-discriminatory control primers were performed to ensure that the amount of template was approximately equal in each case. A. Reactions were run in real-time mode for 45 cycles. Cq values for triplicate reactions were averaged and plotted according to the primer employed (rC vs. rU). B. Reactions were run in end-point mode for 35 cycles. The raw fluorescence measurements from each reaction are shown and plotted according to the primer employed (rC vs. rU).
Figure 8 Application of rhPCR to determine genotype for 31 individuals at the SMAD7 rs4939827 SNP Locus. Human DNA samples from 31 individuals comprising 10 C/C homozygotes (circles), 10 T/T homozygotes (squares), and 11 C/T heterozygotes (triangles) were obtained from the Coriell Cell Repository and genotypes were determined using rhPCR. Reactions were run in triplicate using 2 ng of genomic DNA with SYBR® Green detection. Separate reactions using unmodified non-discriminatory control primers were performed to ensure that the amount of template was approximately equal in each case. A. Reactions were run in real-time mode for 45 cycles. Cq values for triplicate reactions were averaged and plotted according to the primer employed (rC vs. rU). B. Reactions were run in end-point mode for 35 cycles. The raw fluorescence measurements from each reaction are shown and plotted according to the primer employed (rC vs. rU).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Research works printed but not linked: 4

  1. Will SG: Modified Nucleic Acid Amplification Primers. 1999, vol. N/A. United States: Roche Molecular Systems, Inc., Pleasanton, California, United States
  2. Liu Q, Sommer SS: Serial coupling of restriction cleavage and extension for nucleic acid amplification. 2006, USA: City of Hope
  3. Sagawa H, Kobayashi E, Kato I: Method of detecting nucleotide polymorphism. 2006, United States: Takara Bio Inc., Shiga, Japan
  4. Winger EE, Kessler DJ, Hargrove DE: Real time homogenous nucleotide assay. 1998, vol. N/A. United States: Edward E. Winger, Alameda, California, United States

Cited by

See all 184

Metadata

Authors
Dobosy, J. R., Rose, S. D., Beltz, K. R., Rupp, S. M., Powers, K. M., Behlke, M. A., & Walder, J. A.
Affiliations
Integrated DNA Technologies (United States) (US)
Corresponding author
Behlke, Mark A
Venue
BMC Biotechnology
Published
2011-08-10
Volume
11
Issue
1
Pages
80-80
ISSN
1472-6750 (ISSN-L)
OpenAlex
W2033609627
Cited by
184
References
57
Citations by year
2026: 24 · 2025: 21 · 2024: 16 · 2023: 18 · 2022: 14 · 2021: 23 · 2020: 20 · 2019: 14 · 2018: 13 · 2017: 8 · 2016: 6 · 2014: 2 · 2013: 2 · 2012: 2
FWCI
0.78
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • BMC Biotechnology (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Molecular Biology Techniques and Applications
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › DNA and Nucleic Acid Chemistry
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › CRISPR and Genetic Engineering
Keywords
RNase H2, Pyrococcus abyssi, primer dimers, PCR specificity, single nucleotide polymorphism detection, mismatch discrimination, off-target amplification, allele-specific PCR, genotyping, multiplex PCR
MeSH terms
Base Sequence, Enzyme Stability, Humans, Molecular Sequence Data, Nucleic Acid Hybridization, Sensitivity and Specificity, Temperature, Polymerase Chain Reaction, Ribonuclease H, DNA Primers, Polymorphism, Single Nucleotide, Pyrococcus abyssi

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: RNase H-dependent PCR (rhPCR): improved specificity and single nucleotide polymorphism detection using blocked cleavable primers. https://app.cochat.ai/papers/10.1186/1472-6750-11-80
The paper
Dobosy, J. R., Rose, S. D., Beltz, K. R., Rupp, S. M., Powers, K. M., Behlke, M. A., & Walder, J. A. (2011). RNase H-dependent PCR (rhPCR): improved specificity and single nucleotide polymorphism detection using blocked cleavable primers. BMC Biotechnology. https://doi.org/10.1186/1472-6750-11-80

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.