The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Progress and challenges in biomaterials used for bone tissue engineering: bioactive glasses and elastomeric composites
Open accessAbstract
Driven by the increasing economic burden associated with bone injury and disease, biomaterial development for bone repair represents the most active research area in the field of tissue engineering. This article provides an update on recent advances in the development of bioactive biomaterials for bone regeneration. Special attention is paid to the recent developments of sintered Na-containing bioactive glasses, borate-based bioactive glasses, those doped with trace elements (such as Cu, Zn, and Sr), and novel elastomeric composites. Although bioactive glasses are not new to bone tissue engineering, their tunable mechanical properties, biodegradation rates, and ability to support bone and vascular tissue regeneration, as well as osteoblast differentiation from stem and progenitor cells, are superior to other bioceramics. Recent progresses on the development of borate bioactive glasses and trace element-doped bioactive glasses expand the repertoire of bioactive glasses. Although boride and other trace elements have beneficial effects on bone remodeling and/or associated angiogenesis, the risk of toxicity at high levels must be highly regarded in the design of new composition of bioactive biomaterials so that the release of these elements must be satisfactorily lower than their biologically safe levels. Elastomeric composites are superior to the more commonly used thermoplastic-matrix composites, owing to the well-defined elastic properties of elastomers which are ideal for the replacement of collagen, a key elastic protein within the bone tissue. Artificial bone matrix made from elastomeric composites can, therefore, offer both sound mechanical integrity and flexibility in the dynamic environment of injured bone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765 · cited 2×
“To address this problem, aliphatic diisocyanates (e.g., lysine diisocyanate (LDI) and 1,4-diisocyanatobutane (BDI)) have been used as the replacements of aromatic diisocyanates (Gunatillake et al. 2003b; Lamba et al. 1998; Pinchuk 1994) in PUs that are designed to be biodegradable.”
BackgroundMethodA tough biodegradable elastomer
Wang, Y., Ameer, G. A., Sheppard, B. J., & Langer, R. (2002) · Nature Biotechnology · doi:10.1038/nbt0602-602 · Cited by 1,314
Santerre, J. P., Woodhouse, K., Laroche, G., & Labow, R. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.079 · Cited by 718
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
Zdrahala, R. J., & Zdrahala, I. J. (1999) · Journal of Biomaterials Applications · doi:10.1177/088532829901400104 · Cited by 540
Avella, M., Martuscelli, E., & Raimo, M. (2000) · Journal of Materials Science · doi:10.1023/a:1004740522751 · Cited by 357
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355 · cited 3×
“Poly (lactide-co-caprolactone) (PLACL) synthesized by Cohn and Salomon (2005) demonstrates remarkable mechanical properties, with Young's modulus, UTS, and strain at break being up to 30 MPa, 32 MPa, and 600%, respectively.”
BackgroundCharacterization of a bovine collagen–hydroxyapatite composite scaffold for bone tissue engineering
Rodrigues, C. V. M., Serricella, P., Linhares, A. B. R., Guerdes, R. M., Borojevic, R., Rossi, M. A., Duarte, M. E. L., & Farina, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00410-1 · Cited by 322
Pinchuk, L. (1995) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856294x00347 · Cited by 252
Cited by
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review
Hernández-González, A. C., Téllez-Jurado, L., & Rodríguez-Lorenzo, L. M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115514 · Cited by 549
Ding, Y., Wen, C., Hodgson, P., & Li, Y. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21746a · Cited by 531
Design, Materials, and Mechanobiology of Biodegradable Scaffolds for Bone Tissue Engineering
Velasco, M. A., Narváez-Tovar, C. A., & Garzón-Alvarado, D. A. (2015) · BioMed Research International · doi:10.1155/2015/729076 · Cited by 395
Metadata
- Authors
- Chen, Q., Zhu, C., & Thouas, G. A.
- Venue
- Progress in Biomaterials
- Published
- 2012
- Volume
- 1
- Issue
- 1
- Pages
- 2
- ISSN
- 2194-0509 (ISSN-L)
- 2194-0517
- OpenAlex
- W2147883204
- Cited by
- 240
- References
- 11
- FWCI
- 5.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress and challenges in biomaterials used for bone tissue engineering: bioactive glasses and elastomeric composites. https://app.cochat.ai/papers/10.1186/2194-0517-1-2
- The paper
- Chen, Q., Zhu, C., & Thouas, G. A. (2012). Progress and challenges in biomaterials used for bone tissue engineering: bioactive glasses and elastomeric composites. Progress in Biomaterials. https://doi.org/10.1186/2194-0517-1-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.