CoChat

The influence of growth rate-controlling feeding strategy on the surfactin production in Bacillus subtilis bioreactor processes

Open access
Hiller, Eric, Off, Manuel, Hermann, Alexander, Vahidinasab, Maliheh, Benatto Perino, Elvio Henrique, Lilge, Lars, Hausmann, Rudolf · 2024 · Microbial Cell Factories

The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index; 16 of the 22 sources its claims cite were checked for support.

Abstract

Abstract Background The production of surfactin, an extracellular accumulating lipopeptide produced by various Bacillus species, is a well-known representative of microbial biosurfactant. However, only limited information is available on the correlation between the growth rate of the production strain, such as B. subtilis BMV9, and surfactin production. To understand the correlation between biomass formation over time and surfactin production, the availability of glucose as carbon source was considered as main point. In fed-batch bioreactor processes, the B. subtilis BMV9 was used, a strain well-suited for high cell density fermentation. By adjusting the exponential feeding rates, the growth rate of the surfactin-producing strain, was controlled. Results Using different growth rates in the range of 0.075 and 0.4 h -1 , highest surfactin titres of 36 g/L were reached at 0.25 h -1 with production yields Y P/S of 0.21 g/g and Y P/X of 0.7 g/g, while growth rates lower than 0.2 h -1 resulted in insufficient and slowed biomass formation as well as surfactin production (Y P/S of 0.11 g/g and Y P/X of 0.47 g/g for 0.075 h -1 ). In contrast, feeding rates higher than 0.25 h -1 led to a stimulation of overflow metabolism, resulting in increased acetate formation of up to 3 g/L and an accumulation of glucose due to insufficient conversion, leading to production yields Y P/S of 0.15 g/g and Y P/X of 0.46 g/g for 0.4 h -1 . Conclusions Overall, the parameter of adjusting exponential feeding rates have an important impact on the B. subtilis productivity in terms of surfactin production in fed-batch bioreactor processes. A growth rate of 0.25 h -1 allowed the highest surfactin production yield, while the total conversion of substrate to biomass remained constant at the different growth rates.

Overview

CoChat Summary

TL;DR

In fed-batch bioreactor cultures of *Bacillus subtilis* BMV9, controlling the exponential feeding rate strongly affected surfactin production, with the best performance at a growth rate of 0.25 h−1. At this rate the study reports the highest surfactin titre, 36.0 ± 0.8 g/L, while lower rates limited biomass/product formation and higher rates caused glucose accumulation and overflow acetate formation.

Key findings

  • Across growth rates of 0.075–0.4 h−1, the highest surfactin titre was 36 g/L at 0.25 h−1, with YP/S = 0.21 g/g and YP/X = 0.7 g/g.
  • Lower growth rates gave poorer performance: at 0.075 h−1, surfactin titre was 19.7 ± 0.6 g/L, with YP/S = 0.11 g/g and YP/X = 0.47 g/g.
  • Higher growth rates reduced efficiency via overflow metabolism: at 0.4 h−1, acetate reached up to 3 g/L, glucose accumulated, and yields were YP/S = 0.15 g/g and YP/X = 0.46 g/g.
  • Final biomass was reported as approximately constant overall across processes, with ~42.9 ± 5.1 g/L at the end of each bioreactor process; the highest CDW was 48 ± 0.9 g/L at 0.25 h−1.

Methods

  • Comparative fed-batch bioreactor experiments were run with *B. subtilis* BMV9 in a 30 L fermenter filled with 12 L batch medium; the only variable parameter was the target growth rate during feeding (0.075, 0.15, 0.2, 0.25, 0.3, 0.4 h−1).
  • Cultures used glucose as the sole carbon source; growth was controlled by exponential glucose feeding, with batch phase glucose initially depleted before feeding began.
  • Samples were analyzed for glucose, acetate, ammonium, CDW, and surfactin; surfactin was quantified by HPTLC, and yields/productivities (YP/X, YP/S, qP/X, qP/S) were calculated from the feeding phase. Experiments were performed in biological duplicates.

Limitations

  • The paper states the functional equation for specific productivities is valid only within the experimental growth-rate range 0.075–0.4 h−1.
  • The study was limited to a single strain (BMV9) and a single carbon source (glucose) in a defined fed-batch setup, so broader generalization is not directly tested. *(Inferred from the text.)*
  • The paper notes that further studies are needed to identify the molecular regulatory networks underlying the better performance at 0.25 h−1 versus lower growth rates.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1186/s12934-024-02531-w

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Representative batch cultivation procedure using B. subtilis BMV9. The figure shows the time-dependent kinetics of cell dry weight (black cycles), glucose availability (blue inverted triangles) and surfactin production (red squares) during the cultivation process
Fig. 1 Representative batch cultivation procedure using B. subtilis BMV9. The figure shows the time-dependent kinetics of cell dry weight (black cycles), glucose availability (blue inverted triangles) and surfactin production (red squares) during the cultivation processCC BY · PubMed Central
Fig. 2 Time course of bioreactor cultivations of B. subtilis BMV9 with different growth rates for the production of surfactin. After depletion of glucose in the batch phase, the feed solution was added at different growth rates of 0.075 h− 1 (A), 0.15 h− 1 (B), 0.2 h− 1 (C), 0.25 h− 1 (D), 0.3 h− 1 (E) and 0.4 h− 1 (F). The fed-batch process was stopped when a feeding volume of 6 L was depleted. The process parameters used were cell dry weight (black circles), glucose (blue inverted triangles) and surfactin concentration (red squares). Each feeding rate used for the fed-batch bioreactor process was performed in biological duplicates
Fig. 2 Time course of bioreactor cultivations of B. subtilis BMV9 with different growth rates for the production of surfactin. After depletion of glucose in the batch phase, the feed solution was added at different growth rates of 0.075 h− 1 (A), 0.15 h− 1 (B), 0.2 h− 1 (C), 0.25 h− 1 (D), 0.3 h− 1 (E) and 0.4 h− 1 (F). The fed-batch process was stopped when a feeding volume of 6 L was depleted. The process parameters used were cell dry weight (black circles), glucose (blue inverted triangles) and surfactin concentration (red squares). Each feeding rate used for the fed-batch bioreactor process was performed in biological duplicatesCC BY · PubMed Central
Fig. 3 Correlation between growth rate and maximum surfactin titre. Six different growth rates during the feeding phase of the bioreactor experiments in the range of 0.075 h− 1 and 0.4 h− 1 (circles) were determined. In addition, reference results from Klausmann et al. [5] with a growth rate of 0.1 h− 1 (cross) were integrated
Fig. 3 Correlation between growth rate and maximum surfactin titre. Six different growth rates during the feeding phase of the bioreactor experiments in the range of 0.075 h− 1 and 0.4 h− 1 (circles) were determined. In addition, reference results from Klausmann et al. [5] with a growth rate of 0.1 h− 1 (cross) were integratedCC BY · PubMed Central
Fig. 4 Coherence between growth rate and specific surfactin productivities. The specific productivity of biomass (A) and the specific productivity on glucose (B) show a clear correlation to the growth rate with a trend towards higher productivities at higher growth rates, but ending in a saturation after 0.25 h− 1. Based on the correlation between the adjusted growth rate during the feeding phase and the specific surfactin productivities, exponential equations for biomass and glucose could be derived
Fig. 4 Coherence between growth rate and specific surfactin productivities. The specific productivity of biomass (A) and the specific productivity on glucose (B) show a clear correlation to the growth rate with a trend towards higher productivities at higher growth rates, but ending in a saturation after 0.25 h− 1. Based on the correlation between the adjusted growth rate during the feeding phase and the specific surfactin productivities, exponential equations for biomass and glucose could be derivedCC BY · PubMed Central

Verification

Claims the paper makes

11 Valid · 0 Not valid · 5 Not checked · 56 Own results and interpretations

38 more claims

Create a free account to see all 72 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 21
  • Probably not a substantial claim. 13

Create a free account to see these claims.

Citations

Cites

Show all 27 references

Cited by

See all 21

Metadata

Authors
Hiller, E., Off, M., Hermann, A., Vahidinasab, M., Benatto Perino, E. H., Lilge, L., & Hausmann, R.
Affiliations
University of Hohenheim (DE)
Corresponding author
Lilge, Lars
Venue
Microbial Cell Factories
Published
2024-09-30
Volume
23
Issue
1
Pages
260-260
ISSN
1475-2859 (ISSN-L)
OpenAlex
W4402966831
Cited by
21
References
27
Citations by year
2026: 9 · 2025: 12
FWCI
2.08
Type
journal article
Language
en
Open access
Licence
Locations
  • Microbial Cell Factories (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Universität Hohenheim
Topics
  • Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Microbial Metabolic Engineering and Bioproduction
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Biotechnology › Enzyme Production and Characterization
Keywords
surfactin, Bacillus subtilis, fed-batch fermentation, growth rate control, feeding rate, lipopeptide biosurfactant, glucose utilization, product yield, high cell density fermentation
MeSH terms
Bacillus subtilis, Fermentation, Glucose, Peptides, Cyclic, Surface-Active Agents, Biomass, Bioreactors, Lipopeptides, Batch Cell Culture Techniques

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The influence of growth rate-controlling feeding strategy on the surfactin production in Bacillus subtilis bioreactor processes. https://app.cochat.ai/papers/10.1186/s12934-024-02531-w
The paper
Hiller, E., Off, M., Hermann, A., Vahidinasab, M., Benatto Perino, E. H., Lilge, L., & Hausmann, R. (2024). The influence of growth rate-controlling feeding strategy on the surfactin production in Bacillus subtilis bioreactor processes. Microbial Cell Factories. https://doi.org/10.1186/s12934-024-02531-w

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.