Skin bioprinting: the future of burn wound reconstruction?
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Burns are a significant cause of trauma, and over the years, the focus of patient care has shifted from just survival to facilitation of improved functional outcomes. Typically, burn treatment, especially in the case of extensive burn injuries, involves surgical excision of injured skin and reconstruction of the burn injury with the aid of skin substitutes. Conventional skin substitutes do not contain all skin cell types and do not facilitate recapitulation of native skin physiology. Three-dimensional (3D) bioprinting for reconstruction of burn injuries involves layer-by-layer deposition of cells along with scaffolding materials over the injured areas. Skin bioprinting can be done either in situ or in vitro. Both these approaches are similar except for the site of printing and tissue maturation. There are technological and regulatory challenges that need to be overcome for clinical translation of bioprinted skin for burn reconstruction. However, the use of bioprinting for skin reconstruction following burns is promising; bioprinting will enable accurate placement of cell types and precise and reproducible fabrication of constructs to replace the injured or damaged sites. Overall, 3D bioprinting is a very transformative technology, and its use for wound reconstruction will lead to a paradigm shift in patient outcomes. In this review, we aim to introduce bioprinting, the different stages involved, in vitro and in vivo skin bioprinting, and the various clinical and regulatory challenges in adoption of this technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Self-citation3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917 · cited 3×
“For laser printing, the effects of laser energy, substrate film thickness, and hydrogel viscosity on cell viability [95] as well as droplet size [54, 94], cell differentiation [96], and cell proliferation [96] have been studied.”
BackgroundThree-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492 · cited 2×
“Researchers have also done post-printing modeling of cellular dynamics [97, 98], fusion [98], deformation, and stiffness [99].”
Background3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822 · cited 3×
“TPP can provide a very high resolution beyond the light diffraction limit since two-photon absorption only happens in the center region of the laser focal spot where the energy is above the threshold to trigger two-photon absorption [56].”
BackgroundMethodHuman Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
Cited by
3D bioprinting for skin tissue engineering: Current status and perspectives
Weng, T., Zhang, W., Xia, Y., Wu, P., Yang, M., Jin, R., Xia, S., Wang, J., You, C., Han, C., et al. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211028574 · Cited by 303
Using bioprinting and spheroid culture to create a skin model with sweat glands and hair follicles
Zhang, Y., Enhejirigala, Yao, B., Li, Z., Song, W., Li, J., Zhu, D., Wang, Y., Duan, X., Yuan, X., et al. (2021) · Burns & Trauma · doi:10.1093/burnst/tkab013 · Cited by 69
Ramakrishnan, R., Chouhan, D., Vijayakumar Sreelatha, H., Arumugam, S., Mandal, B. B., & Krishnan, L. K. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00328 · Cited by 35
Bioengineered Efficacy Models of Skin Disease: Advances in the Last 10 Years
Stanton, D. N., Ganguli-Indra, G., Indra, A. K., & Karande, P. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020319 · Cited by 22
Biocompatible composites based on alginate, polycaprolactone, and nanocellulose - A review
Ikhtiarini, N., Kamil, M. Z., Bukit, B. F., Juliadmi, D., Prasetiyo, K. W., Fransiska, D., Sedayu, B. B., Subiyanto, B., Sulastiningsih, I. M., Rochima, E., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143423 · Cited by 18
Metadata
- Authors
- Varkey, M., Visscher, D. O., van Zuijlen, P. P. M., Atala, A., & Yoo, J. J.
- Venue
- Burns & Trauma
- Publisher
- Oxford University Press (OUP)
- Published
- 2019
- Volume
- 7
- Pages
- 4-4
- ISSN
- 2321-3868 (ISSN-L)
- 2321-3876
- OpenAlex
- W2921520064
- Cited by
- 152
- References
- 7
- FWCI
- 6.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Skin bioprinting: the future of burn wound reconstruction? https://app.cochat.ai/papers/10.1186/s41038-019-0142-7
- The paper
- Varkey, M., Visscher, D. O., van Zuijlen, P. P. M., Atala, A., & Yoo, J. J. (2019). Skin bioprinting: the future of burn wound reconstruction? Burns & Trauma. https://doi.org/10.1186/s41038-019-0142-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.