Generative AI for medical 3D printing: a comparison of ChatGPT outputs to reference standard education
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
© The Author(s) 2023. Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/. The Creative Commons Public Domain Dedication waiver (http:// creat iveco mmons. org/ publi cdoma in/ zero/1. 0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data. 3D Printing in Medicine
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“AIs used in medical education are mostly generative AI large language models that were developed and validated based on billions to trillions of parameters [2].”
From Artificial intelligence and medical education: application in classroom instruction and student assessment using a pharmacology & therapeutics case study (2024) · cites this paper as [2]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Language Models are Few-Shot Learners
Brown, T. B., Mann, B., Ryder, N., Subbiah, M., Kaplan, J., Dhariwal, P., Neelakantan, A., Shyam, P., Sastry, G., Askell, A., et al. (2020) · arXiv · doi:10.48550/arxiv.2005.14165 · Cited by 23,372 · cited 1×
“GPT-3, from which ChatGPT was developed, had 96 such layers and 175 billion parameters [8].”
Background3D Slicer as an image computing platform for the Quantitative Imaging Network
Fedorov, A., Beichel, R., Kalpathy-Cramer, J., Finet, J., Fillion-Robin, J.-C., Pujol, S., Bauer, C., Jennings, D., Fennessy, F., Sonka, M., et al. (2012) · Magnetic Resonance Imaging · doi:10.1016/j.mri.2012.05.001 · Cited by 9,023 · cited 1×
“At the onset of 3D printing in a HCF, a radiologist is likely to utilize free software such as DEP Meshworks ® (Detroit Engineering Products, Troy, MI, USA) or 3D Slicer (www. slicer. org ) [16].”
MethodKung, T. H., Cheatham, M., Medenilla, A., Sillos, C., De Leon, L., Elepaño, C., Madriaga, M., Aggabao, R., Diaz-Candido, G., Maningo, J., et al. (2023) · PLOS Digital Health · doi:10.1371/journal.pdig.0000198 · Cited by 4,115 · cited 1×
“For example, ChatGPT has been applied to the United States Medical Licensing Examination (USMLE) [30] and has been proven to pass the American Board of Radiology (ABR) specialty examinations [31].”
MethodDave, T., Athaluri, S. A., & Singh, S. (2023) · Frontiers in Artificial Intelligence · doi:10.3389/frai.2023.1169595 · Cited by 1,204
3D-printing techniques in a medical setting: a systematic literature review
Tack, P., Victor, J., Gemmel, P., & Annemans, L. (2016) · BioMedical Engineering OnLine · doi:10.1186/s12938-016-0236-4 · Cited by 1,098 · cited 2×
“1 “Three-dimensional printing in medicine" by Tack et al. (2016) -”
ChatGPT and the future of medical writing
Biswas, S. (2023) · Radiology · doi:10.1148/radiol.223312 · Cited by 571
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535 · cited 1×
“The fifth listed publication has an accurate year and author, however the title exists as “Cardiac 3D printing and its future directions” [27].”
BackgroundBhayana, R., Krishna, S., & Bleakney, R. R. (2023) · Radiology · doi:10.1148/radiol.230582 · Cited by 460
Lecler, A., Duron, L., & Soyer, P. (2023) · Diagnostic and Interventional Imaging · doi:10.1016/j.diii.2023.02.003 · Cited by 385 · cited 1×
“As these models continue to improve, it is likely that more innovative uses for LLMs and GPT-based models in radiology will be developed, leading to benefits as well as challenges [11].”
Background3D-printed patient-specific applications in orthopedics
Wong, K. C. (2016) · Orthopedic Research and Reviews · doi:10.2147/orr.s99614 · Cited by 361 · cited 1×
“The second listed publication has an incorrect citation, however, there is an article written by KC Wong as a sole author in 2016 titled “3D-printed patient-specific applications in orthopedics” [24].”
Background
Cited by
AI Hallucinations: A Misnomer Worth Clarifying
Maleki, N., Padmanabhan, B., & Dutta, K. (2024) · 2024 IEEE Conference on Artificial Intelligence (CAI) · doi:10.1109/cai59869.2024.00033 · Cited by 194
“[23] Definition was not provided.”
Sridharan, K., & Sequeira, R. P. (2024) · BMC Medical Education · doi:10.1186/s12909-024-05365-7 · Cited by 114
“AIs used in medical education are mostly generative AI large language models that were developed and validated based on billions to trillions of parameters [2].”
BackgroundCollins, B. R., Black, E. W., & Rarey, K. E. (2024) · Clinical Anatomy · doi:10.1002/ca.24178 · Cited by 61
“Other studies have considered applications of generative AI for three-dimensional printing (Sriwastwa et al., 2023) and anatomical illustration (Noel, 2023).”
Readability and Information Quality in Cancer Information From a Free vs Paid Chatbot
Musheyev, D., Pan, A., Gross, P. W., Kamyab, D., Kaplinsky, P., Spivak, M., Bragg, M. A., Loeb, S., & Kabarriti, A. E. (2024) · JAMA Network Open · doi:10.1001/jamanetworkopen.2024.22275 · Cited by 48
Al-Khater, K. M. (2024) · Clinical Anatomy · doi:10.1002/ca.24243 · Cited by 33
“This visual limitation was also demonstrated by Sriwastwa et al. (2023), who reported that this model of generative AI (used in June 2023) has difficulties in dealing with 3D printing instructions and its responses were suitable only for juniors in the field (Sriwastwa et al., 2023).”
Metadata
- Authors
- Sriwastwa, A., Ravi, P., Emmert, A., Chokshi, S., Kondor, S., Dhal, K., Patel, P., Chepelev, L. L., Rybicki, F. J., & Gupta, R.
- Affiliations
- University of Cincinnati (US)
- The University of Texas at Arlington (US)
- University of Toronto (CA)
- Corresponding author
- Rybicki, Frank J.
- ORCID
- Venue
- 3D Printing in Medicine
- Published
- 2023-08-01
- Volume
- 9
- Issue
- 1
- Pages
- 21-21
- ISSN
- 2365-6271 (ISSN-L)
- PMC
- PMC10391950
- OpenAlex
- W4385441896
- Cited by
- 28
- References
- 29
- Citations by year
- 2026: 5 · 2025: 7 · 2024: 16
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- 3D Printing in Medicine (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Health Sciences › Medicine › Health Informatics › Artificial Intelligence in Healthcare and Education
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Innovations in Medical Education
- Keywords
- generative AI, ChatGPT, 3D printing in medicine, AI-generated educational content, medical education, large language models
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Generative AI for medical 3D printing: a comparison of ChatGPT outputs to reference standard education. https://app.cochat.ai/papers/10.1186/s41205-023-00186-8
- The paper
- Sriwastwa, A., Ravi, P., Emmert, A., Chokshi, S., Kondor, S., Dhal, K., Patel, P., Chepelev, L. L., Rybicki, F. J., & Gupta, R. (2023). Generative AI for medical 3D printing: a comparison of ChatGPT outputs to reference standard education. 3D Printing in Medicine. https://doi.org/10.1186/s41205-023-00186-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.