The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Emissions and Char Quality of Flame-Curtain "Kon Tiki" Kilns for Farmer-Scale Charcoal/Biochar Production
Open accessAbstract
FLAME CURTAIN BIOCHAR KILNS: Pyrolysis of organic waste or woody materials yields charcoal, a stable carbonaceous product that can be used for cooking or mixed into soil, in the latter case often termed "biochar". Traditional kiln technologies for charcoal production are slow and without treatment of the pyrolysis gases, resulting in emissions of gases (mainly methane and carbon monoxide) and aerosols that are both toxic and contribute to greenhouse gas emissions. In retort kilns pyrolysis gases are led back to a combustion chamber. This can reduce emissions substantially, but is costly and consumes a considerable amount of valuable ignition material such as wood during start-up. To overcome these problems, a novel type of technology, the Kon-Tiki flame curtain pyrolysis, is proposed. This technology combines the simplicity of the traditional kiln with the combustion of pyrolysis gases in the flame curtain (similar to retort kilns), also avoiding use of external fuel for start-up. BIOCHAR CHARACTERISTICS: A field study in Nepal using various feedstocks showed char yields of 22 ± 5% on a dry weight basis and 40 ± 11% on a C basis. Biochars with high C contents (76 ± 9%; n = 57), average surface areas (11 to 215 m(2) g(-1)), low EPA16-PAHs (2.3 to 6.6 mg kg(-1)) and high CECs (43 to 217 cmolc/kg)(average for all feedstocks, mainly woody shrubs) were obtained, in compliance with the European Biochar Certificate (EBC). GAS EMISSION FACTORS: Mean emission factors for the flame curtain kilns were (g kg(-1) biochar for all feedstocks); CO2 = 4300 ± 1700, CO = 54 ± 35, non-methane volatile organic compounds (NMVOC) = 6 ± 3, CH4 = 30 ± 60, aerosols (PM10) = 11 ± 15, total products of incomplete combustion (PIC) = 100 ± 83 and NOx = 0.4 ± 0.3. The flame curtain kilns emitted statistically significantly (p<0.05) lower amounts of CO, PIC and NOx than retort and traditional kilns, and higher amounts of CO2. IMPLICATIONS: With benefits such as high quality biochar, low emission, no need for start-up fuel, fast pyrolysis time and, importantly, easy and cheap construction and operation the flame curtain technology represent a promising possibility for sustainable rural biochar production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477
Jeffery, S., Verheijen, F. G. A., van der Velde, M., & Bastos, A. C. (2011) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2011.08.015 · Cited by 2,422
Biochar and its effects on plant productivity and nutrient cycling: A meta-analysis
Biederman, L. A., & Harpole, W. S. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12037 · Cited by 1,737
Surface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171 · cited 1×
“Surface areas of most biochars were in the range of 100–200 m(2)/g (Table 1) which is in agreement with other biochars produced with industrial technology at temperatures of 600° to 750°C [37].”
BackgroundBiochar's role in mitigating soil nitrous oxide emissions: A review and meta-analysis
Cayuela, M. L., van Zwieten, L., Singh, B. P., Jeffery, S., Roig, A., & Sánchez-Monedero, M. A. (2014) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2013.10.009 · Cited by 1,053
Quantifying the Total and Bioavailable Polycyclic Aromatic Hydrocarbons and Dioxins in Biochars
Hale, S. E., Lehmann, J., Rutherford, D., Zimmerman, A. R., Bachmann, R. T., Shitumbanuma, V., O’Toole, A., Sundqvist, K. L., Arp, H. P. H., & Cornelissen, G. (2012) · Environmental Science & Technology · doi:10.1021/es203984k · Cited by 634 · cited 2×
“In addition, PAHs in biochar are only very sparingly bioavailable, often less than 1% [28].”
BackgroundMethodSelf-citationPlant growth improvement mediated by nitrate capture in co-composted biochar
Kammann, C. I., Schmidt, H.-P., Messerschmidt, N., Linsel, S., Steffens, D., Müller, C., Koyro, H.-W., Conte, P., & Joseph, S. (2015) · Scientific Reports · doi:10.1038/srep11080 · Cited by 535
Self-citationOne Step Forward toward Characterization: Some Important Material Properties to Distinguish Biochars
Schimmelpfennig, S., & Glaser, B. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0146 · Cited by 518 · cited 1×
“07 confirming the high aromaticity expected for biochars made at temperatures around 700°C [36].”
BackgroundEffect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332 · cited 1×
“This is in the same order of magnitude as other high temperature (700°C) pyrolysis systems [31–34].”
ResultHeterogeneous global crop yield response to biochar: a meta-regression analysis
Crane-Droesch, A., Abiven, S., Jeffery, S., & Torn, M. S. (2013) · Environmental Research Letters · doi:10.1088/1748-9326/8/4/044049 · Cited by 297
Biomass Pyrolysis for Biochar or Energy Applications? A Life Cycle Assessment
Peters, J. F., Iribarren, D., & Dufour, J. (2015) · Environmental Science & Technology · doi:10.1021/es5060786 · Cited by 272 · cited 1×
“[44] 3010 3 10 0 0 0.”
Schmidt, H., Pandit, B., Martinsen, V., Cornelissen, G., Conte, P., & Kammann, C. (2015) · Agriculture · doi:10.3390/agriculture5030723 · Cited by 187
Self-citationpH effects of the addition of three biochars to acidic Indonesian mineral soils
Martinsen, V, Alling, V, Nurida, N., Mulder, J., Hale, S., Ritz, C., Rutherford, D., Heikens, A., Breedveld, G., & Cornelissen, G. (2015) · Soil Science and Plant Nutrition · doi:10.1080/00380768.2015.1052985 · Cited by 153 · cited 1×
“Cation Exchange Capacities (CECs) of 15 biochars were 40–130 cmolc/kg, with one char even showing CEC above 200 cmolc/kg, which is on the high end of literature values for fieldmade biochars [26, 38, 39], indicating that the biochars probably have good nutrient-holding characteristics [26, 40].”
BackgroundSelf-citationFarmer-led maize biochar trials: effect on crop yield and soil nutrients under conservation farming
Martinsen, V., Mulder, J., Shitumbanuma, V., Sparrevik, M., Børresen, T., & Cornelissen, G. (2014) · Journal of Plant Nutrition and Soil Science · doi:10.1002/jpln.201300590 · Cited by 134
Self-citation
Cited by
Janu, R., Mrlik, V., Ribitsch, D., Hofman, J., Sedláček, P., Bielská, L., & Soja, G. (2021) · Carbon Resources Conversion · doi:10.1016/j.crcon.2021.01.003 · Cited by 453
Smith, P., Adams, J., Beerling, D. J., Beringer, T., Calvin, K. V., Fuss, S., Griscom, B., Hagemann, N., Kammann, C., Kraxner, F., et al. (2019) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-101718-033129 · Cited by 380
Environmental Comparison of Biochar and Activated Carbon for Tertiary Wastewater Treatment
Thompson, K. A., Shimabuku, K. K., Kearns, J. P., Knappe, D. R. U., Summers, R. S., & Cook, S. M. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b03239 · Cited by 351
Greenhouse Gas Inventory Model for Biochar Additions to Soil
Woolf, D., Lehmann, J., Ogle, S., Kishimoto-Mo, A. W., McConkey, B., & Baldock, J. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c02425 · Cited by 227
Wijitkosum, S., & Jiwnok, P. (2019) · Applied Sciences · doi:10.3390/app9193980 · Cited by 167
“(2016) [45] found similar low biochar yields of 22 ± 5 wt% from Eupatorium, wood and rice husk feedstocks using Kon Tiki kilns at Farmer Scale.”
BackgroundMethodInfluential
Metadata
- Authors
- Cornelissen, G., Pandit, N. R., Taylor, P., Pandit, B. H., Sparrevik, M., & Schmidt, H. P.
- Venue
- PLOS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2016-05-18
- Volume
- 11
- Issue
- 5
- Pages
- e0154617
- ISSN
- 1932-6203 (ISSN-L)
- OpenAlex
- W2396711057
- Cited by
- 186
- References
- 14
- FWCI
- 5.17
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.