The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Mechanical, physical and chemical characterisation of mycelium-based composites with different types of lignocellulosic substrates
Open accessAbstract
The current physical goods economy produces materials by extracting finite valuable resources without taking their end of the life and environmental impact into account. Modernity leaves us with devasted landscapes of depleted resources, waste landfill, queries, oil platforms. At the time of the Anthropocene, the various effects the human role has on the constitution of the soils create an acceleration of material entropy. It is the terrestrial entanglement of fungal materials that we investigate in this paper by offering an alternative fabrication paradigm based on the growth of resources rather than on extraction. Unlike the latter, biologically augmented building materials can be grown by combining micro-organisms such as fungal mycelium with agricultural plant-based waste. In this study, we investigate the production process, the mechanical, hygrothermal and chemical properties of mycelium-based composites with different types of lignocellulosic reinforcement fibres combined with a white rot fungus, Trametes versicolor . Together, they form an interwoven three-dimensional filamentous network binding the feedstock into a lightweight material. The mycelium-based material is heat-killed after the growing process. This is the first study reporting the dry density, the Young’s modulus, the compressive stiffness, the stress-strain curves, the thermal conductivity, the water absorption rate and a complete FTIR analyse of mycelium-based composites by making use of a disclosed protocol with T. versicolor and five different type of fibres (hemp, flax, flax waste, softwood, straw) and fibre conditions (loose, chopped, dust, pre-compressed and tow). These experimental results show that mycelium-composites can fulfil the requirements of thermal insulation. The thermal conductivity and water absorption coefficient of the mycelium composites with flax, hemp, and straw have an overall good insulation behaviour in all the aspects compared to conventional unsustainable materials. The conducted tests reveal that the mechanical performances of the mycelium-based composites depend more on the fibre condition, size, and processing than on the chemical composition of the fibres. Abstract Figure Graphical abstract Highlights The type of fibre influences the colonisation of mycelium: samples containing flax, hemp, straw and flax-waste resulted in a well-developed composite The type of fibre has a smaller influence on the compressive stiffness than the fibre processing and size. Pre-compression and chopped fibres (particle size <5mm) improve the compressive mechanical properties of mycelium composites. The thermal conductivity and water absorption coefficient of the mycelium composites with flax, hemp, and straw have an overall good insulation behaviour in all the aspects compared to conventional unsustainable materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 2×
“Furthermore, a high amount of cellulose in fibres results in a higher Young’s modulus and tensile strength [37].”
BackgroundManual of environmental microbiology.
Hurst, C. J., Crawford, R. L., Garland, J. L., Lipson, D. A., Mills, A., & Stetzenbach, L. D. (2007) · Cited by 1,413
Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose
Schwanninger, M., Rodrigues, J. C., Pereira, H., & Hinterstoisser, B. (2004) · Vibrational Spectroscopy · doi:10.1016/j.vibspec.2004.02.003 · Cited by 1,368
FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi
Pandey, K. K., & Pitman, A. J. (2003) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(03)00052-0 · Cited by 1,202
A review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952
State of the art in thermal insulation materials and aims for future developments
Papadopoulos, A. M. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.05.006 · Cited by 914
Manual of Environmental Microbiology
(2016) · ASM Press eBooks · doi:10.1128/9781555818821 · Cited by 770
Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties
Haneef, M., Ceseracciu, L., Canale, C., Bayer, I. S., Heredia-Guerrero, J. A., & Athanassiou, A. (2017) · Scientific Reports · doi:10.1038/srep41292 · Cited by 704
Oxidative Mechanisms Involved in Lignin Degradation by White-Rot Fungi
ten Have, R., & Teunissen, P. J. M. (2001) · Chemical Reviews · doi:10.1021/cr000115l · Cited by 547
Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wösten, H. A. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.027 · Cited by 516
Hydrophobins: Proteins that Change the Nature of the Fungal Surface
Wessels, J. G. H. (1996) · Advances in Microbial Physiology · doi:10.1016/s0065-2911(08)60154-x · Cited by 438
Morphology and mechanics of fungal mycelium
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2017) · Scientific Reports · doi:10.1038/s41598-017-13295-2 · Cited by 361
Physico-mechanical and thermodynamic properties of mycelium-based biocomposites: a review
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E. (2019) · Sustainability · doi:10.3390/su11010281 · Cited by 276
Mycelium composites: a review of engineering characteristics and growth kinetics
Jones, M., Huynh, T., Dekiwadia, C., Daver, F., & John, S. (2017) · Journal of Bionanoscience · doi:10.1166/jbns.2017.1440 · Cited by 270 · cited 1×
“The potential benefits of this material in the field of architecture and construction have hardly been investigated so far [8].”
BackgroundPhysical and Mechanical Properties of Fungal Mycelium-Based Biofoam
Yang, Z. (., Zhang, F., Still, B., White, M., & Amstislavski, P. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001866 · Cited by 208
Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K. M. B., Wösten, H. A. B., & Krijgsheld, P. (2018) · Scientific Reports · doi:10.1038/s41598-018-23171-2 · Cited by 173
Fully Bio-Based Hybrid Composites Made of Wood, Fungal Mycelium and Cellulose Nanofibrils
Sun, W., Tajvidi, M., Hunt, C. G., McIntyre, G., & Gardner, D. J. (2019) · Scientific Reports · doi:10.1038/s41598-019-40442-8 · Cited by 170
Advances in MICROBIAL PHYSIOLOGY
(2010) · Advances in microbial physiology/Advances in Microbial Physiology · doi:10.1016/b978-0-12-381045-8.00008-4 · Cited by 146
Emerging Technologies for Materials and Chemicals from Biomass
Rowell, R. M., Schultz, T. P., & Narayan, R. (1992) · ACS symposium series · doi:10.1021/bk-1992-0476 · Cited by 135
Growing and testing mycelium bricks as building insulation materials
Xing, Y., Brewer, M., El-Gharabawy, H. M., Griffith, G. W., & Jones, P. (2018) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/121/2/022032 · Cited by 132
Ziegler, A. R., Bajwa, S. G., Holt, G. A., McIntyre, G., & Bajwa, D. S. (2016) · Applied Engineering in Agriculture · doi:10.13031/aea.32.11830 · Cited by 121
Adhesion improvement of lignocellulosic products by enzymatic pre-treatment
Widsten, P., & Kandelbauer, A. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.04.003 · Cited by 117
Mechanical behavior of mycelium-based particulate composites
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2797-z · Cited by 108
Attenuated total reflection infrared spectroscopy of white-rot decayed beech wood
Mohebby, B. (2005) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2005.01.003 · Cited by 104
Structural changes in biodegraded lime wood
Popescu, C., Popescu, M., & Vasile, C. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.08.015 · Cited by 96
Jones, M. P., Lawrie, A. C., Huynh, T. T., et al. (2019) · Process Biochemistry · doi:10.1016/j.procbio.2019.01.018 · Cited by 93
Jones, M. P., Huynh, T. T., & John, S. (2018) · Advanced Materials Letters · doi:10.5185/amlett.2018.1977 · Cited by 86
Measurement of Apparent Thermal Conductivity by the Thermal Probe Method
Manohar, K., Yarbrough, D., & Booth, J. R. (2000) · Journal of Testing and Evaluation · doi:10.1520/jte12123j · Cited by 53
The production process and compressive strength of Mycelium-based materials
Lelivelt, R. R., Lindner, G., Teuffel, P., & Lamers, H. H. (2015) · TU/e Research Portal · Cited by 53
Emerging technologies for materials and chemicals from biomass
Coombs, J. (1991) · Biomass and Bioenergy · doi:10.1016/0961-9534(91)90019-9 · Cited by 35
A New Approach to Manufacturing Biocomposite Sandwich Structures: Mycelium-Based Cores
Jiang, L., Walczyk, D., McIntyre, G., & Bucinell, R. (2016) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2016-8864 · Cited by 35
Cited by
Engineered mycelium composite construction materials from fungal biorefineries: A critical review
Jones, M., Mautner, A., Luenco, S., Bismarck, A., & John, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108397 · Cited by 591
A comprehensive framework for the production of mycelium-based lignocellulosic composites
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., & Peeters, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138431 · Cited by 308
Self-citationLeather-like material biofabrication using fungi
Jones, M., Gandia, A., John, S., & Bismarck, A. (2020) · Nature Sustainability · doi:10.1038/s41893-020-00606-1 · Cited by 259
Metadata
- Authors
- Elsacker, E., Vandelook, S., Brancart, J., Peeters, E., & De Laet, L.
- Venue
- PLOS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2019-07-22
- Volume
- 14
- Issue
- 7
- Pages
- e0213954
- ISSN
- 1932-6203 (ISSN-L)
- OpenAlex
- W2921236268
- Cited by
- 390
- References
- 32
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.