The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
High-entropy alloys by mechanical alloying: A review
Abstract
Mechanical alloying (MA) followed by sintering has been one of the most widely adopted routes to produce nanocrystalline high-entropy alloys (HEAs). Enhanced solid solubility, room temperature processing, and homogenous alloy formation are the key benefits provided by MA. Spark plasma sintering has largely been used to obtain high-density HEA pellets from milled powders. However, there are many challenges associated with the production of HEAs using MA, which include contamination during milling and high propensity of oxidation. The present review provides a comprehensive understanding of various HEAs produced by MA so far, with the aim to bring out the governing aspects of phase evolution, thermal stability, and properties achieved. The limitations and challenges of the process are also critically assessed with a possible way forward. The paper also compares the results obtained from high-pressure torsion, another severe plastic deformation technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Nishita, M., Park, S.-Y., Nishio, T., Kamizaki, K., Wang, Z., Tamada, K., Takumi, T., Hashimoto, R., Otani, H., Pazour, G. J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-016-0028-x · Cited by 15,947
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Gasque, G., Conway, S., Huang, J., Rao, Y., & Vosshall, L. B. (2013) · Scientific Reports · doi:10.1038/srep02120 · Cited by 2,292
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Corrosion-Resistant High-Entropy Alloys: A Review
Shi, Y., Yang, B., & Liaw, P. (2017) · Metals · doi:10.3390/met7020043 · Cited by 1,038
Novel materials synthesis by mechanical alloying/milling
Murty, B. S., & Ranganathan, S. (1998) · International Materials Reviews · doi:10.1179/095066098790105654 · Cited by 713
Self-citationHigh-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability
Zhang, Y., Zuo, T., Cheng, Y., & Liaw, P. K. (2013) · Scientific Reports · doi:10.1038/srep01455 · Cited by 690
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Zhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Fu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 501
Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys
Sathiyamoorthi, P., Murty, B. S., & Kottada, R. S. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.11.044 · Cited by 411
Self-citationJi, W., Wang, W., Wang, H., Zhang, J., Wang, Y., Zhang, F., & Fu, Z. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.08.008 · Cited by 386
Varalakshmi, S., Kamaraj, M., & Murty, B. S. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.05.104 · Cited by 366
Self-citationKang, B., Lee, J., Ryu, H. J., & Hong, S. H. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.12.021 · Cited by 292
Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder
Wang, C.-H., Tsai, H.-L., & Hwang, W.-S. (2016) · Materials · doi:10.3390/ma10010001 · Cited by 271
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying
Varalakshmi, S., Kamaraj, M., & Murty, B. S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.09.019 · Cited by 267
Self-citationRogal, Ł., Kalita, D., Tarasek, A., Bobrowski, P., & Czerwiński, F. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.274 · Cited by 267
Chen, Y., Hu, Y.-H., Hsieh, C., Yeh, J., & Chen, S.-K. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.03.087 · Cited by 257
High-Temperature Oxidation Behavior of Al-Co-Cr-Ni-(Fe or Si) Multicomponent High-Entropy Alloys
Butler, T. M., Alfano, J. P., Martens, R. L., & Weaver, M. L. (2015) · JOM · doi:10.1007/s11837-014-1185-7 · Cited by 237
Yu, P. F., Zhang, L. J., Cheng, H., Zhang, H., Ma, M. Z., Li, Y. C., Li, G., Liaw, P. K., & Liu, R. P. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.005 · Cited by 234
Joo, S.-H., Kato, H., Jang, M. J., Moon, J., Kim, E. B., Hong, S.-J., & Kim, H. S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.010 · Cited by 227
The thermochemistry of transition metal sulfides
Shatynski, S. R. (1977) · Oxidation of Metals · doi:10.1007/bf00608014 · Cited by 221
Shang, C., Axinte, E., Sun, J., Li, X., Li, P., Du, J., Qiao, P., & Wang, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.076 · Cited by 216
Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability
Zou, Y., Wheeler, J. M., Ma, H., Okle, P., & Spolenak, R. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04716 · Cited by 215
Mohanty, S., Maity, T. N., Mukhopadhyay, S., Sarkar, S., Gurao, N. P., Bhowmick, S., & Biswas, K. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.09.062 · Cited by 212
Sharma, A. S., Yadav, S., Biswas, K., & Basu, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.003 · Cited by 205
Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys
Vaidya, M., Guruvidyathri, K., & Murty, B. S. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.342 · Cited by 202
Self-citationRecent Progress in High Entropy Alloy Research
MacDonald, B. E., Fu, Z., Zheng, B., Chen, W., Lin, Y., Chen, F., Zhang, L., Ivanisenko, J., Zhou, Y., Hahn, H., et al. (2017) · JOM · doi:10.1007/s11837-017-2484-6 · Cited by 183
Guo, W., Liu, B., Liu, Y., Li, T., Fu, A., Fang, Q., & Nie, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.230 · Cited by 173
Moravčík, I., Čížek, J., Zapletal, J., Kováčová, Z., Veselý, J., Minárik, P., Kitzmantel, M., Neubauer, E., & Dlouhý, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.036 · Cited by 149
Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy
Wang, C., Ji, W., & Fu, Z. (2014) · Advanced Powder Technology · doi:10.1016/j.apt.2014.03.014 · Cited by 145
Hu, C., Chen, W., Liu, X., Tang, Q., Xie, Y., & Dai, P. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.02.040 · Cited by 142
Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy
Shivam, V., Basu, J., Shadangi, Y., Singh, M. K., & Mukhopadhyay, N. K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.057 · Cited by 136
Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder
Liu, Y., Wang, J., Fang, Q., Liu, B., Wu, Y., & Chen, S. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.08.012 · Cited by 133
Chen, Z., Chen, W., Wu, B., Cao, X., Liu, L., & Fu, Z. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.08.056 · Cited by 132
Varalakshmi, S., Rao, G. A., Kamaraj, M., & Murty, B. S. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4246-5 · Cited by 129
Self-citationFu, Z., Chen, W., Fang, S., Zhang, D., Xiao, H., & Zhu, D. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.146 · Cited by 120
Fu, Z., Chen, W., Wen, H., Chen, Z., & Lavernia, E. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.04.238 · Cited by 116
Vaidya, M., Prasad, A., Parakh, A., & Murty, B. S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.027 · Cited by 116
Self-citationHigh-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy
Kilmametov, A. R., Kulagin, R., Mazilkin, A. A., Seils, S., Boll, T., Heilmaier, M., & Hahn, H. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.031 · Cited by 116
Yang, P., Liu, Y., Zhao, X., Cheng, J., & Li, H. (2016) · Advanced Powder Technology · doi:10.1016/j.apt.2016.03.023 · Cited by 113
Kang, B., Lee, J.-H., Ryu, H. J., & Hong, S. H. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.07.145 · Cited by 113
Nanocrystalline high-entropy alloys
Koch, C. C. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.341 · Cited by 101
Pohan, R. M., Gwalani, B., Lee, J.-H., Alam, T., Hwang, J. Y., Ryu, H. J., Banerjee, R., & Hong, S. H. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.013 · Cited by 97
Amorphization of equimolar alloys with HCP elements during mechanical alloying
Chen, Y., Tsai, C., Juan, C.-C., Chuang, M., Yeh, J., Chin, T., & Chen, S.-K. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.06.179 · Cited by 94
Moravčík, I., Moravcikova-Gouvea, L., Horník, V., Kováčová, Z., Kitzmantel, M., Neubauer, E., & Dlouhý, I. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.07.034 · Cited by 93
Zhang, B., Duan, Y., Cui, Y., Ma, G., Wang, T., & Dong, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.018 · Cited by 91
Preparation of nanocrystalline high-entropy alloys via cryomilling of cast ingots
Katiyar, N. K., Tiwary, C. S., & Biswas, K. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2485-z · Cited by 91
Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys
Kumar, A., Dhekne, P. P., Swarnakar, A. K., & Chopkar, M. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.10.099 · Cited by 89
Microstructure and mechanical properties of non-equilibrium solidified CoCrFeNi high entropy alloy
Wang, J., Guo, T., Li, J., Jia, W., & Kou, H. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.037 · Cited by 89
Hu, C., Liu, X., Tang, Q., Wang, W., Yan, X., & Dai, P. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.168 · Cited by 88
Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying
Alijani, F., Reihanian, M., & Gheisari, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.204 · Cited by 83
Tian, L., Fu, M. W., & Xiong, W. (2018) · Materials · doi:10.3390/ma11020320 · Cited by 82
Enhanced Strength of a Mechanical Alloyed NbMoTaWVTi Refractory High Entropy Alloy
Long, Y., Su, K., Zhang, J., Liang, X., Peng, H., & Li, X. (2018) · Materials · doi:10.3390/ma11050669 · Cited by 82
Průša, F., Šenková, A., Kučera, V., Čapek, J., & Vojtěch, D. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.08.014 · Cited by 77
Salemi, F., Abbasi, M. H., & Karimzadeh, F. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.274 · Cited by 76
Wang, P., Cai, H., Zhou, S., & Xu, L.-Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.288 · Cited by 76
High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating
Colombini, E., Rosa, R., Trombi, L., Zadra, M., Casagrande, A., & Veronesi, P. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.065 · Cited by 75
Zhao, R., Ren, B., Zhang, G., Liu, Z., & Zhang, J. (2018) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2018.07.072 · Cited by 73
Wang, P., Cai, H., & Cheng, X. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.205 · Cited by 68
Vasanthakumar, K., Karthiselva, N. S., Chawake, N., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.03.216 · Cited by 68
Synthesis of AlFeCuCrMgx (x=0, 0.5, 1, 1.7) alloy powders by mechanical alloying
Maulik, O., & Kumar, V. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.10.025 · Cited by 66
Yadav, S., Sarkar, S., Aggarwal, A., Kumar, A., & Biswas, K. (2018) · Wear · doi:10.1016/j.wear.2018.05.023 · Cited by 63
Ge, W., Wu, B., Wang, S., Xu, S., Shang, C., Zhang, Z., & Wang, Y. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.07.006 · Cited by 62
Mridha, S., Samal, S., Khan, P. Y., Biswas, K., & Govind (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-1824-6 · Cited by 61
Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy
Prasad, H., Singh, S., & Panigrahi, B. B. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.080 · Cited by 60
Baldenebro-López, F. J., Ramírez, J. M. H., Arredondo-Rea, S. P., Gómez-Esparza, C. D., & Martínez-Sánchez, R. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.059 · Cited by 58
Fu, Z., Chen, W., Wen, H., Morgan, S., Chen, F., Zheng, B., Zhou, Y., Zhang, L., & Lavernia, E. J. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.07.052 · Cited by 57
Different-Shaped Ultrafine MoNbTaW HEA Powders Prepared via Mechanical Alloying
Tong, Y., Qi, P., Liang, X., Chen, Y., Hu, Y., & Hu, Z. (2018) · Materials · doi:10.3390/ma11071250 · Cited by 56
Phase formations in low density high entropy alloys
Sun, W., Huang, X., & Luo, A. A. (2016) · Calphad · doi:10.1016/j.calphad.2016.11.002 · Cited by 55
Kumar, A., Swarnakar, A. K., & Chopkar, M. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-018-3409-4 · Cited by 55
Sathiyamoorthi, P., Murty, B. S., & Kottada, R. S. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9441 · Cited by 54
Self-citationKumar, D., Maulik, O., Kumar, S., Prasad, Y. V. S. S., & Kumar, V. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.08.049 · Cited by 53
Xu, J. H., Axinte, E. M., Zhao, Z., & Wang, Y. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.04.067 · Cited by 48
Sun, C., Li, P., Xi, S., Zhou, Y. J., Li, S., & Yang, X. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.05.022 · Cited by 48
Nam, S., Kim, M. J., Hwang, J. Y., & Choi, H. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.180 · Cited by 47
Effects of milling on the microstructure and hardness of Al2NbTi3V2Zr high-entropy alloy
Tan, X., Zhang, G., Zhi, Q., & Liu, Z. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.066 · Cited by 44
High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying
Oleszak, D., Antolak‐Dudka, A., & Kulik, T. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.08.060 · Cited by 44
Zhang, B., Duan, Y., Cui, Y., Ma, G., Wang, T., & Dong, X. (2018) · RSC Advances · doi:10.1039/c8ra01762j · Cited by 43
AlNiCrFexMo0.2CoCu High Entropy Alloys Prepared by Powder Metallurgy
Yuhu, F., Yunpeng, Z., Guan, H., Huimin, S., & Li, H. (2013) · 稀有金属材料与工程 · doi:10.1016/s1875-5372(13)60074-0 · Cited by 39
Wu, B., Chen, W., Jiang, Z., Chen, Z., & Fu, Z. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.007 · Cited by 39
On the single phase fcc solid solution in nanocrystalline Cr-Nb-Ti-V-Zn high-entropy alloy
Dwivedi, A., Koch, C. C., & Rajulapati, K. V. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.07.083 · Cited by 35
Gómez-Esparza, C. D., Baldenebro-López, F. J., González-Rodelas, L., Baldenebro-López, J., & Martínez-Sánchez, R. (2016) · Materials Research · doi:10.1590/1980-5373-mr-2015-0668 · Cited by 32
Kumar, D., Maulik, O., Bagri, A. S., Prasad, Y. V. S. S., & Kumar, V. (2016) · Materials Today Proceedings · doi:10.1016/j.matpr.2016.09.005 · Cited by 31
Liu, Z., Lei, Y., Gray, C., & Wang, G. (2015) · JOM · doi:10.1007/s11837-015-1508-3 · Cited by 30
Wang, W., Li, B., Zhai, S., Xu, J., Niu, Z., Xu, J. H., & Wang, Y. (2018) · Metals and Materials International · doi:10.1007/s12540-018-0047-1 · Cited by 30
Wang, H., Gao, T.-X., Niu, J., Shi, P., Xu, J. H., & Wang, Y. (2016) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-016-1213-4 · Cited by 18
Honglei, Wang, Tai-xiu, Gao, Jiazheng, Niu, Pei-jian, Shi, Jing, J., Xu, et al. (2016) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 7
Cited by
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Metadata
- Authors
- Vaidya, M., Muralikrishna, G. M., & Murty, B. S.
- Venue
- Journal of Materials Research
- Published
- 2019-03-14
- Volume
- 34
- Issue
- 5
- Pages
- 664-686
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2920899037
- Cited by
- 492
- References
- 96
- FWCI
- 25.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.