Effect of nano-CaCO3 on hydration of cement containing supplementary cementitious materials
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The efficacy of the addition of nano-CaCO 3 in accelerating the hydration of ordinary Portland cement (OPC) delayed by the presence of high volumes of supplementary cementitious materials including fly ash and slag was investigated. The conduction calorimetry indicated that the early hydration of OPC was significantly accelerated by the addition of the nano-CaCO 3 and the higher the amount of CaCO 3 addition, the greater was the accelerating effect. The thermogravimetric analysis results showed that the amounts of added CaCO 3 became slightly lower as the hydration took place; however, any new reaction products were not detected by the X-ray diffractometry analysis. The engineering properties, including microhardness and modulus of elasticity, in the early stage of the hydration were remarkably improved by the addition of nano-CaCO 3. It was suggested that the seeding effect of the nano-CaCO 3 particles and the nucleation of C–S–H caused the enhanced strength development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,889
Cited by
Hydration of Portland cement with high replacement by siliceous fly ash
Deschner, F., Winnefeld, F., Lothenbach, B., Seufert, S., Schwesig, P., Dittrich, S., Goetz-Neunhoeffer, F., & Neubauer, J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.06.009 · Cited by 544
Shaikh, F. U. A., & Supit, S. W. M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.099 · Cited by 390
Properties and durability of concrete produced using CO2 as an accelerating admixture
Monkman, S., MacDonald, M., Hooton, R. D., & Sandberg, P. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.10.007 · Cited by 268
Activation of cement hydration with carbon dioxide
Monkman, S., Kenward, P. A., Dipple, G., MacDonald, M., & Raudsepp, M. (2018) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2018.1443854 · Cited by 100
Monkman, S., Kenward, P., & Dipple, G. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c07480 · Cited by 23
Ma, N., Ye, H., Choi, C. E., & Zhang, J. (2025) · Acta Geotechnica · doi:10.1007/s11440-024-02470-1 · Cited by 21
Metadata
- Authors
- Sato, T., & Beaudoin, J. J.
- Venue
- Advances in Cement Research
- Publisher
- Emerald
- Published
- 2011-01
- Volume
- 23
- Issue
- 1
- Pages
- 33-43
- ISSN
- 0951-7197 (ISSN-L)
- 1751-7605
- OpenAlex
- W1970007487
- Cited by
- 245
- References
- 1
- FWCI
- 22.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.