Variations of Acoustic and Diffuse Mismatch Models in Predicting Thermal-Boundary Resistance
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Solid-solid thermal-boundary resistance plays an important role in determining heat flow, in both cryogenic and room-temperature applications. The acoustic mismatch model (AMM) and the diffuse mismatch model (DMM) have traditionally been used to predict the thermal boundary resistance R b across the interface of two adjoining materials at temperatures well below the Debye temperatures of the materials in question. Both the AMM and DMM use the Debye density of states (DOS) in both contacting solids. Here, the use of a measured DOS is made in conjunction with the DMM. This shows an improvement in the prediction of R b relative to that based on the Debye DOS. Another approach considered is to predict R b from measured specific heat per unit volume C data. The measured C automatically includes the effect of temperature on the DOS. This leads to a marginal improvement in R b above that predicted when using the measured DOS. The AMM describes the thermal transport at a solid-solid interface below a few Kelvin quite accurately
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microscale Heat Conduction in Dielectric Thin Films
Majumdar, A. (1993) · Journal of Heat Transfer · doi:10.1115/1.2910673 · Cited by 910
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Nonlocal and Nonequilibrium Heat Conduction in the Vicinity of Nanoparticles
Chen, G. (1996) · Journal of Heat Transfer · doi:10.1115/1.2822665 · Cited by 382
Cited by
Low Thermal Resistances at GaN–SiC Interfaces for HEMT Technology
Cho, J., Bozorg-Grayeli, E., Altman, D. H., Asheghi, M., & Goodson, K. E. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2011.2181481 · Cited by 109
“where Rb is the TBR, C1(T ) is the measured heat capacity of material 1 at temperature T , ci,j is the speed of sound through material i for the jth phonon mode, and c1D is the average sound velocity in material 1 [15].”
BackgroundThermal Transport Through GaN–SiC Interfaces From 300 to 600 K
Ziade, E., Yang, J., Brummer, G., Nothern, D., Moustakas, T., & Schmidt, A. J. (2015) · Applied Physics Letters · doi:10.1063/1.4930104 · Cited by 101
Cooling Limits for GaN HEMT Technology
Won, Y., Cho, J., Agonafer, D., Asheghi, M., & Goodson, K. E. (2013) · 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) · doi:10.1109/csics.2013.6659222 · Cited by 57
“Table 1 summarizes interface thermal resistance data for GaN-Si, GaN-SiC, and GaN-diamond composites with theoretical lower limits at room temperature predicted by the diffuse mismatch model (DMM) [17], [18].”
BackgroundWang, K., Hu, W., Wu, S., Wang, H., Padhiar, M. A., & Ji, Y. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad4b69 · Cited by 5
Metadata
- Authors
- De Bellis, L., Phelan, P. E., & Prasher, R. S.
- Venue
- Journal of Thermophysics and Heat Transfer
- Published
- 2000-04
- Volume
- 14
- Issue
- 2
- Pages
- 144-150
- ISSN
- 0887-8722 (ISSN-L)
- 1533-6808
- OpenAlex
- W2034979748
- Cited by
- 84
- References
- 3
- FWCI
- 0.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.