3D Printing technologies for drug delivery: a review
The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
Abstract
With the FDA approval of the first 3D printed tablet, Spritam®, there is now precedence set for the utilization of 3D printing for the preparation of drug delivery systems. The capabilities for dispensing low volumes with accuracy, precise spatial control and layer-by-layer assembly allow for the preparation of complex compositions and geometries. The high degree of flexibility and control with 3D printing enables the preparation of dosage forms with multiple active pharmaceutical ingredients with complex and tailored release profiles. A unique opportunity for this technology for the preparation of personalized doses to address individual patient needs. This review will highlight the 3D printing technologies being utilized for the fabrication of drug delivery systems, as well as the formulation and processing parameters for consideration. This article will also summarize the range of dosage forms that have been prepared using these technologies, specifically over the last 10 years.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of Pharmaceutical Excipients
Rowe, R. C., Sheskey, P. J., & Quinn, M. E. (1994) · Cited by 3,493
Rayleigh, L. (1878) · Proceedings of the London Mathematical Society · doi:10.1112/plms/s1-10.1.4 · Cited by 3,064
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Microfabricated Microneedles: A Novel Approach to Transdermal Drug Delivery
Henry, S., McAllister, D. V., Allen, M. G., & Prausnitz, M. R. (1998) · Journal of Pharmaceutical Sciences · doi:10.1021/js980042+ · Cited by 1,346
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
Iveson, S. M., Litster, J. D., Hapgood, K., & Ennis, B. J. (2001) · Powder Technology · doi:10.1016/s0032-5910(01)00313-8 · Cited by 1,297
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Davis, S. P., Landis, B. J., Adams, Z. H., Allen, M. G., & Prausnitz, M. R. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.12.010 · Cited by 934
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
Additive manufacturing: rapid prototyping comes of age
Campbell, I., Bourell, D., & Gibson, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231563 · Cited by 623
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Lack of Pain Associated with Microfabricated Microneedles
Kaushik, S., Hord, A. H., Denson, D. D., McAllister, D. V., Smitra, S., Allen, M. G., & Prausnitz, M. R. (2001) · Anesthesia & Analgesia · doi:10.1097/00000539-200102000-00041 · Cited by 576
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Dahan, A., Miller, J. M., & Amidon, G. L. (2009) · The AAPS Journal · doi:10.1208/s12248-009-9144-x · Cited by 453
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Pietrzak, K., Isreb, A., & Alhnan, M. A. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.07.027 · Cited by 407
Solid free-form fabrication of drug delivery devices
Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., & Cima, M. J. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00173-5 · Cited by 361
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Inkjet printing - the physics of manipulating liquid jets and drops
Martin, G. D., Hoath, S. D., & Hutchings, I. M. (2008) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/105/1/012001 · Cited by 325
Fab@Home: the personal desktop fabricator kit
Malone, E., & Lipson, H. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776197 · Cited by 322
Inkjet printing for pharmaceutics – A review of research and manufacturing
Daly, R., Harrington, T. S., Martin, G. D., & Hutchings, I. M. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.03.017 · Cited by 317
Process control and scale-up of pharmaceutical wet granulation processes: a review
Faure, A., York, P., & Rowe, R. C. (2001) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(01)00184-9 · Cited by 315
Particle engineering techniques for inhaled biopharmaceuticals
Shoyele, S. A., & Cawthorne, S. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.07.010 · Cited by 301
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds
Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S., & Lau, A. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410512525 · Cited by 241
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
Ramanath, H. S., Chua, C. K., Leong, K. F., & Shah, K. D. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3203-6 · Cited by 239
Dry powders for oral inhalation free of lactose carrier particles
Healy, A. M., Amaro, M. I., Paluch, K. J., & Tajber, L. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.04.005 · Cited by 234
Inkjet printing of drug substances and use of porous substrates‐towards individualized dosing
Sandler, N., Määttänen, A., Ihalainen, P., Kronberg, L., Meierjohann, A., Viitala, T., & Peltonen, J. (2011) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22526 · Cited by 213
Suitability of PLA/TCP for fused deposition modeling
Drummer, D., Cifuentes‐Cuéllar, S., & Rietzel, D. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211272045 · Cited by 210
Pardeike, J., Strohmeier, D. M., Schrödl, N., Voura, C., Gruber, M., Khinast, J. G., & Zimmer, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.08.033 · Cited by 204
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
Oral delivery of proteins by biodegradable nanoparticles
Bakhru, S. H., Furtado, S., Morello, A. P., & Mathiowitz, E. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2013.04.006 · Cited by 190
Inkjet printing as a novel medicine formulation technique
Scoutaris, N., Alexander, M. R., Gellert, P. R., & Roberts, C. J. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.07.033 · Cited by 188
Three-Dimensional Printing in Pharmaceutics: Promises and Problems
Yu, D. G., Zhu, L.-M., Branford-White, C. J., & Yang, X. L. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21284 · Cited by 187
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
Drug eluting stents: Developments and current status
Khan, W., Farah, S., & Domb, A. J. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.02.010 · Cited by 184
Inkjet printing for pharmaceutical applications
Boehm, R. D., Miller, P. R., Daniels, J., Stafslien, S., & Narayan, R. J. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.027 · Cited by 182
Perspective: Concepts of printing technologies for oral film formulations
Preis, M., Breitkreutz, J., & Sandler, N. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.032 · Cited by 174
Formulating Poorly Water Soluble Drugs
(2012) · AAPS Advances in the Pharmaceutical Sciences Series · doi:10.1007/978-1-4614-1144-4 · Cited by 174
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Hoque, M. E., Chuan, Y. L., & Pashby, I. (2012) · Biopolymers · doi:10.1002/bip.21701 · Cited by 165
Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review
LaFountaine, J. S., McGinity, J. W., & Williams, R. O. (2015) · AAPS PharmSciTech · doi:10.1208/s12249-015-0393-y · Cited by 163
Water, J. J., Bohr, A., Boetker, J., Aho, J., Sandler, N., Nielsen, H. M., & Rantanen, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24305 · Cited by 159
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
Tablets With Material Gradients Fabricated by Three-Dimensional Printing
Yu, D. G., Yang, X. L., Huang, W. D., Liu, J., Wang, Y. G., & Xu, H. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20864 · Cited by 159
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Rapid manufacturing: the technologies and applications of rapid prototyping and rapid tooling
Pham, D. T., & Dimov, S. (2001) · Cited by 151
Inkjet dispensing technology: applications in drug discovery
Lemmo, A. V., Rose, D. J., & Tisone, T. C. (1998) · Current Opinion in Biotechnology · doi:10.1016/s0958-1669(98)80139-0 · Cited by 145
Meléndez, P. A., Kane, K. M., Ashvar, C. S., Albrecht, M., & Smith, P. A. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21189 · Cited by 143
Park, S. A., Lee, S. J., Lim, K. S., Bae, I., Lee, J. H., Kim, W. D., Jeong, M. H., & Park, J. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.11.119 · Cited by 138
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Piezoelectric ink jet processing of materials for medicaland biological applications
Sumerel, J. L., Lewis, J., Doraiswamy, A., Deravi, L. F., Sewell, S. L., Gerdon, A. E., Wright, D. W., & Narayan, R. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600123 · Cited by 120
Multiple emulsion technology for the design of microspheres containing peptides and oligopeptides
Couvreur, P., Blanco‐Prieto, M. J., Puisieux, F., Roques, B. P., & Fattal, E. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00052-5 · Cited by 119
Wang, C.-C., Tejwani, M. R., Roach, W. J., Kay, J. L., Yoo, J., Surprenant, H. L., Monkhouse, D. C., & Pryor, T. J. (2006) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040500519300 · Cited by 118
A novel fast disintegrating tablet fabricated by three-dimensional printing
Yu, D., Branford-White, C. J., Yang, Y., et al. (2009) · Drug Development and Industrial Pharmacy · doi:10.3109/03639040903059359 · Cited by 108
Rattanakit, P., Moulton, S. E., Santiago, K. S., Liawruangrath, S., & Wallace, G. G. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.11.007 · Cited by 100
Dropwise Additive Manufacturing of Pharmaceutical Products for Solvent-Based Dosage Forms
Hirshfield, L. J., Giridhar, A., Taylor, L. S., Harris, M. T., & Reklaitis, G. V. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23803 · Cited by 95
Therapeutic Strategies Based on Polymeric Microparticles
Vilos, C., & Velásquez, L. (2012) · BioMed Research International · doi:10.1155/2012/672760 · Cited by 84
Gu, Y., Chen, X., Lee, J. H., Monteiro, D. A., Wang, H., & Lee, W. Y. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.006 · Cited by 79
Rapid manufacturing — the technologies and applications of rapid prototyping and rapid tooling
Edwards, K. L. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00077-2 · Cited by 77
Modification of microneedles using inkjet printing
Boehm, R. D., Miller, P. R., Hayes, S. L., Monteiro-Riviere, N. A., & Narayan, R. J. (2011) · AIP Advances · doi:10.1063/1.3602461 · Cited by 74
Continuous 3D-printing for additive manufacturing
Günther, D., Heymel, B., Günther, J., et al. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2012-0068 · Cited by 73
Novel methods of antiepileptic drug delivery — Polymer-based implants
Halliday, A. J., Moulton, S. E., Wallace, G. G., & Cook, M. J. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.04.004 · Cited by 72
Boehm, R. D., Miller, P. R., Schell, W. A., Perfect, J. R., & Narayan, R. J. (2013) · JOM · doi:10.1007/s11837-013-0574-7 · Cited by 72
Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
Hamad, K., Kaseem, M., & Deri, F. (2011) · Advances in Chemical Engineering and Science · doi:10.4236/aces.2011.14030 · Cited by 72
Hamid, Q., Snyder, J., Wang, C., Timmer, M., Hammer, J., Guceri, S., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034109 · Cited by 72
Hyperspectral imaging in quality control of inkjet printed personalised dosage forms
Vakili, H., Kolakovic, R., Genina, N., Marmion, M., Salo, H., Ihalainen, P., Peltonen, J. P. K., & Sandler, N. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.034 · Cited by 67
Mueannoom, W., Srisongphan, A., Taylor, K. M. G., Hauschild, S., & Gaisford, S. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.09.016 · Cited by 65
Inkjet Printing Methodologies for Drug Screening
Arrabito, G. D., & Pignataro, B. (2010) · Analytical Chemistry · doi:10.1021/ac100169w · Cited by 65
Sharma, G., Mueannoom, W., Buanz, A. B. M., Taylor, K. M. G., & Gaisford, S. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.02.045 · Cited by 55
Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films
Thellen, C., Cheney, S., & Ratto, J. A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37850 · Cited by 53
Wu, W., Zheng, Q., Guo, X., & Huang, W. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-6977-1 · Cited by 44
Lin, S., Chao, P., Chien, Y. W., Sayani, A. P., Kumar, S., Mason, M., West, T. G., Yang, A., & Monkhouse, D. C. (2001) · AAPS PharmSciTech · doi:10.1208/pt020316 · Cited by 34
Introduction to rapid prototyping of biomaterials
Chua, C. K., Leong, K. F., & An, J. (2014) · Elsevier eBooks · doi:10.1533/9780857097217.1 · Cited by 30
Modelling of PLA melt rheology and batch mixing energy balance
Marec, P. E. L., Quantin, J.-C., Ferry, L., Bénézet, J., Guilbert, S., & Bergeret, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.09.012 · Cited by 25
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Metadata
- Authors
- Prasad, L. K., & Smyth, H.
- Venue
- Drug Development and Industrial Pharmacy
- Publisher
- Informa UK Limited
- Published
- 2015-12-13
- Volume
- 42
- Issue
- 7
- Pages
- 1019-1031
- ISSN
- 0363-9045 (ISSN-L)
- 1520-5762
- OpenAlex
- W2186075428
- Cited by
- 454
- References
- 90
- FWCI
- 23.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.