The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
The hygroscopic behavior of plant fibers: a review
Open accessAbstract
Environmental concern has resulted in a renewed interest in bio-based materials. Among them, plant fibers are perceived as an environmentally friendly substitute to glass fibers for the reinforcement of composites, particularly in automotive engineering. Due to their wide availability, low cost, low density, high-specific mechanical properties, and eco-friendly image, they are increasingly being employed as reinforcements in polymer matrix composites. Indeed, their complex microstructure as a composite material makes plant fiber a really interesting and challenging subject to study. Research subjects about such fibers are abundant because there are always some issues to prevent their use at large scale (poor adhesion, variability, low thermal resistance, hydrophilic behavior). The choice of natural fibers rather than glass fibers as filler yields a change of the final properties of the composite. One of the most relevant differences between the two kinds of fiber is their response to humidity. Actually, glass fibers are considered as hydrophobic whereas plant fibers have a pronounced hydrophilic behavior. Composite materials are often submitted to variable climatic conditions during their lifetime, including unsteady hygroscopic conditions. However, in humid conditions, strong hydrophilic behavior of such reinforcing fibers leads to high level of moisture absorption in wet environments. This results in the structural modification of the fibers and an evolution of their mechanical properties together with the composites in which they are fitted in. Thereby, the understanding of these moisture absorption mechanisms as well as the influence of water on the final properties of these fibers and their composites is of great interest to get a better control of such new biomaterials. This is the topic of this review paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 4×
“REVIEW ARTICLE published: 24 January 2014 doi: 10.3389/fchem.2013.00043 The hygroscopic behavior of plant fibers: a review”
InfluentialBiocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Sisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Overview No. 104 The physical and mechanical properties of NiAl
Miracle, D. B. (1993) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(93)90001-9 · Cited by 1,066
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Cellulose and Cellulose Derivatives
(2005) · Elsevier eBooks · doi:10.1016/b978-0-444-82254-3.x5000-0 · Cited by 852
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Sugiyama, J., Vuong, R., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00014a033 · Cited by 791
Nelson, M. L., & O'Connor, R. T. (1964) · Journal of Applied Polymer Science · doi:10.1002/app.1964.070080322 · Cited by 719
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins
Carter, H. G., & Kibler, K. G. (1978) · Journal of Composite Materials · doi:10.1177/002199837801200201 · Cited by 674
De Rosa, I. M., Kenny, J. M., Puglia, D., Santulli, C., & Sarasini, F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.013 · Cited by 576
Effects of environmental conditions on mechanical and physical properties of flax fibers
Stamboulis, A. G., Baillie, C. A., & Peijs, T. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00032-x · Cited by 542
McGregor, R. R. (1954) · Industrial & Engineering Chemistry · doi:10.1021/ie50539a034 · Cited by 515
Cell-wall recovery after irreversible deformation of wood
Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S., & Fratzl, P. (2003) · Nature Materials · doi:10.1038/nmat1019 · Cited by 500
Assarar, M., Scida, D., El Mahi, A., Poilâne, C., & Ayad, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.07.024 · Cited by 490
Tashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
Charlet, K., Baley, C., Morvan, C., Jernot, J. P., Gomina, M., & Bréard, J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.03.006 · Cited by 442
Free/bound water absorption in an epoxy adhesive
Popineau, S., Rondeau‐Mouro, C., Gaillet, C., & Shanahan, M. E. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.008 · Cited by 358
Packing Analysis of Carbohydrates and Polysaccharides. III. Valonia Cellulose and Cellulose II
Sarko, A., & Muggli, R. (1974) · Macromolecules · doi:10.1021/ma60040a016 · Cited by 325
Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications
Symington, M. C., Banks, W. M., David-West, O. S., & Pethrick, R. A. (2009) · Journal of Composite Materials · doi:10.1177/0021998308097740 · Cited by 300
A study of the potential of acetylation to improve the properties of plant fibres
Hill, C. A. S., Khalil, H. P. S. A., & Hale, M. D. C. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10012-7 · Cited by 293
Structure and properties of some vegetable fibres: Part 1 Sisal fibre
Mukherjee, P. S., & Satyanarayana, K. G. (1984) · Journal of Materials Science · doi:10.1007/bf00980755 · Cited by 291
The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers
Pejic, B. M., Kostic, M. M., Skundric, P. D., & Praskalo, J. Z. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.12.073 · Cited by 287
Bourmaud, A., Morvan, C., Bouali, A., Placet, V., Perré, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.11.031 · Cited by 276
George, J., Bhagawan, S. S., & Thomas, S. (1998) · Composites Science and Technology · doi:10.1016/s0266-3538(97)00161-9 · Cited by 276
Effect of chemical treatments on water sorption and mechanical properties of flax fibres
Alix, S., Philippe, E., Bessadok, A., Lebrun, L., Morvan, C., & Marais, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.067 · Cited by 275
Seawater ageing of flax/poly(lactic acid) biocomposites
Le Duigou, A., Davies, P., & Baley, C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.03.025 · Cited by 271
Young's modulus of hemicellulose as related to moisture content
Cousins, W. J. (1978) · Wood Science and Technology · doi:10.1007/bf00372862 · Cited by 270
Building flax fibres: more than one brick in the walls
Morvan, C., Andème-Onzighi, C., Girault, R., Himmelsbach, D. S., Driouich, A., & Akin, D. E. (2003) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2003.07.001 · Cited by 266
Studies on Jute Composites—A Literature Review
Mohanty, A. K., & Misra, M. (1995) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559508009599 · Cited by 264
Effect of chemical treatments of Alfa (Stipa tenacissima) fibres on water-sorption properties
Bessadok, A., Marais, S., Gouanvé, F., Colasse, L., Zimmerlin, I., Roudesli, S., & Métayer, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.04.013 · Cited by 256
Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Coroller, G., Lefeuvre, A., Le Duigou, A., Bourmaud, A., Ausias, G., Gaudry, T., & Baley, C. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.03.018 · Cited by 254
The use of FTi.r.-a.t.r. spectroscopy to characterize penetrant diffusion in polymers
Fieldson, G. T., & Barbari, T. A. (1993) · Polymer · doi:10.1016/0032-3861(93)90765-3 · Cited by 251
Moisture absorption studies of sisal fibre reinforced polypropylene composites
CHOW, C., Xing, X., & Li, R. K. Y. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.005 · Cited by 251
Célino, A., Gonçalves, O., Jacquemin, F., & Fréour, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.09.023 · Cited by 240
Self-citationSynthetic Membranes: Science, Engineering and Applications
(1986) · Springer eBooks · doi:10.1007/978-94-009-4712-2 · Cited by 232
Placet, V. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.031 · Cited by 221
Exploring the micromechanical design of plant cell walls
Burgert, I. (2006) · American Journal of Botany · doi:10.3732/ajb.93.10.1391 · Cited by 220
Review on flammability of biofibres and biocomposites
Mngomezulu, M. E., John, M. J., Jacobs, V., & Luyt, A. S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.071 · Cited by 217
Gauthier, R., Joly, C., Coupas, A. C., Gauthier, H., & Escoubes, M. (1998) · Polymer Composites · doi:10.1002/pc.10102 · Cited by 211
Mishra, S., Naik, J., & Patil, Y. P. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00056-7 · Cited by 211
Davies, G. C., & Bruce, D. M. (1998) · Textile Research Journal · doi:10.1177/004051759806800901 · Cited by 211
Cotugno, S., Larobina, D., Mensitieri, G., Musto, P., & Ragosta, G. (2001) · Polymer · doi:10.1016/s0032-3861(01)00096-9 · Cited by 193
Influence of the sampling area of the stem on the mechanical properties of hemp fibers
Duval, A., Bourmaud, A., Augier, L., & Baley, C. (2010) · Materials Letters · doi:10.1016/j.matlet.2010.11.053 · Cited by 192
Martin, N., Mouret, N., Davies, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.06.012 · Cited by 191
Calculation of elastic properties of natural fibers
Gassan, J., Chate, A., & Bledzki, A. K. (2001) · Journal of Materials Science · doi:10.1023/a:1017969615925 · Cited by 185
Influence of environmental relative humidity on the tensile and rotational behaviour of hemp fibres
Placet, V., Cissé, O., & Boubakar, L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6191-3 · Cited by 178
Hu, R.-H., Sun, M.-Y., & Lim, J.-K. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.02.030 · Cited by 172
A study on moisture absorption and swelling in bio-based jute-epoxy composites
Masoodi, R., & Pillai, K. M. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411434654 · Cited by 169
Transport Principles—Solution, Diffusion and Permeation in Polymer Membranes
Park, G. S. (1986) · Synthetic Membranes: Science, Engineering and Applications · doi:10.1007/978-94-009-4712-2_3 · Cited by 167
Placet, V., Trivaudey, F., Cisse, O., Gucheret-Retel, V., & Boubakar, M. L. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.10.019 · Cited by 164
Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.10.010 · Cited by 163 · cited 2×
“…anhydride, organosilanes, isocyanates, sodium hydroxide, permanganate, and peroxide. . . ) (Gauthier et al., 1998; Hill et al., 1998; Gassan and Bledzki, 1999; Tripathy et al., 1999; Mishra et al., 2000; Mohanty et al., 2000; Bessadok et al., 2007; Islam et al., 2010; Alix et al., 2011, 2012).”
Scattering of morphological and mechanical properties of flax fibres
Charlet, K., Jernot, J., Bréard, J., & Gomina, M. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.04.015 · Cited by 155
Competitive binding of pectin and xyloglucan with primary cell wall cellulose
Zykwinska, A., Thibault, J.-F., & Ralet, M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.05.004 · Cited by 154
Influence of the growth stage of industrial hemp on chemical and physical properties of the fibres
Keller, A., Leupin, M., Mediavilla, V., & Wintermantel, E. (2001) · Industrial Crops and Products · doi:10.1016/s0926-6690(00)00051-0 · Cited by 144
Kinetics of water sorption in flax and PET fibers
Gouanvé, F., Marais, S., Bessadok, A., Langevin, D., & Métayer, M. L. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.10.023 · Cited by 143
Asbestos minerals in modern technology
Speil, S., & Leineweber, J. P. (1969) · Environmental Research · doi:10.1016/0013-9351(69)90036-x · Cited by 134
Natural Fiber Composites in Automotive Applications
Suddell, B. C., & Evans, W. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch7 · Cited by 131
Alix, S., Lebrun, L., Marais, S., Philippe, E., Bourmaud, A., Baley, C., & Morvan, C. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.07.035 · Cited by 127
Bibliography Resource structure properties of natural cellulosic fibres ? an annotated bibliography
Chand, N., Tiwary, R. K., & Rohatgi, P. K. (1988) · Journal of Materials Science · doi:10.1007/bf01174659 · Cited by 127
Toba, K., Yamamoto, H., & Yoshida, M. (2013) · Cellulose · doi:10.1007/s10570-012-9853-7 · Cited by 112
Cellulose and Cellulose Derivatives
Bell, D., Coffey, D., & Henderson, A. (2006) · CRC Press eBooks · doi:10.1201/9781420015164.ch5 · Cited by 112
Gassan, J., & Bledzki, A. K. (1999) · Polymer Composites · doi:10.1002/pc.10383 · Cited by 108
Moisture Effects on Antheraea pernyi Silk’s Mechanical Property
Fu, C., Porter, D., & Shao, Z. (2009) · Macromolecules · doi:10.1021/ma901321k · Cited by 107
Gorshkova, T. (2000) · Annals of Botany · doi:10.1006/anbo.1999.1091 · Cited by 99
Dash, B. N., Rana, A. K., Mishra, H. K., et al. (1999) · Polymer Composites · doi:10.1002/pc.10335 · Cited by 98
Mukherjee, P. S., & Satyanarayana, K. G. (1986) · Journal of Materials Science · doi:10.1007/bf01106524 · Cited by 95
Modelling of effects of ultrastructural morphology on the hygroelastic properties of wood fibres
Neagu, R. C., & Gamstedt, E. K. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1199-9 · Cited by 95
A Small-Angle X-ray Scattering Study of the Effect of Hydration on the Microstructure of Flax Fibers
Astley, O. M., & Donald, A. M. (2001) · Biomacromolecules · doi:10.1021/bm005643l · Cited by 87
Water vapor transport in liquid crystalline and non-liquid crystalline epoxies
Feng, J., Berger, K. R., & Douglas, E. P. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000026944.85440.f3 · Cited by 58
Novel composites utilizing raw wool and polyester resin
Blicblau, A. S., Coutts, R. S. P., & SIMS, A. (1997) · Journal of Materials Science Letters · doi:10.1023/a:1018517512425 · Cited by 43
Hemp yarn reinforced composites – III. Moisture content and dimensional changes
Madsen, B., Hoffmeyer, P., & Lilholt, H. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.07.010 · Cited by 38
The identification of asbestos
Champness, P. E., Cliff, G., & Lorimer, G. W. (1976) · Journal of Microscopy · doi:10.1111/j.1365-2818.1976.tb01096.x · Cited by 36
Effect of hydrogen bonds on the axial stiffnes of crystalline native cellulose
Gillis, P. P. (1969) · Journal of Polymer Science Part A-2 Polymer Physics · doi:10.1002/pol.1969.160070504 · Cited by 36
The tensile deformation of flax fibres as studied by X-ray scattering
Astley, O. M., & Donald, A. M. (2003) · Journal of Materials Science · doi:10.1023/a:1021186421194 · Cited by 35
Zur Fibrillarstruktur nativer Cellulose
Fink, H., Hofmann, D., & Purz, H. J. (1990) · Acta Polymerica · doi:10.1002/actp.1990.010410213 · Cited by 34
Lee, J. M., Pawlak, J. J., & Heitmann, J. A. (2010) · Materials Characterization · doi:10.1016/j.matchar.2010.02.007 · Cited by 24
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
A review on new bio-based constituents for natural fiber-polymer composites
Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560
A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications
Zwawi, M. (2021) · Molecules · doi:10.3390/molecules26020404 · Cited by 349
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Metadata
- Authors
- Célino, A., Fréour, S., Jacquemin, F., & Casari, P.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2014
- Volume
- 1
- Pages
- 43-43
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W2079107372
- Cited by
- 461
- References
- 89
- FWCI
- 16.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.