Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index; 19 of the 96 sources its claims cite were checked for support.

Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection

Open access
Aust, Jonas, Shankland, Sam, Pons, Dirk, Mukundan, Ramakrishnan, Mitrovic, Antonija · 2021 · Aerospace

Abstract

Background—In the field of aviation, maintenance and inspections of engines are vitally important in ensuring the safe functionality of fault-free aircrafts. There is value in exploring automated defect detection systems that can assist in this process. Existing effort has mostly been directed at artificial intelligence, specifically neural networks. However, that approach is critically dependent on large datasets, which can be problematic to obtain. For more specialised cases where data are sparse, the image processing techniques have potential, but this is poorly represented in the literature. Aim—This research sought to develop methods (a) to automatically detect defects on the edges of engine blades (nicks, dents and tears) and (b) to support the decision-making of the inspector when providing a recommended maintenance action based on the engine manual. Findings—For a small sample test size of 60 blades, the combined system was able to detect and locate the defects with an accuracy of 83%. It quantified morphological features of defect size and location. False positive and false negative rates were 46% and 17% respectively based on ground truth. Originality—The work shows that image-processing approaches have potential value as a method for detecting defects in small data sets. The work also identifies which viewing perspectives are more favourable for automated detection, namely, those that are perpendicular to the blade surface.

Overview

CoChat Summary

TL;DR

This paper develops a heuristic image-processing system to detect edge defects on gas turbine compressor blades and a rule-based decision-support tool that recommends accept/repair/reject actions from engine-manual limits. On a small V2500 blade sample, the detector achieved 83% recall with 54% precision, and the decision tool reduced false positives by 16% while recommending correct maintenance actions in most cases.

Key findings

  • In Experiment 2, across 94 images of 47 blades using perspectives P3 and P7, the detector achieved a true-positive/recall rate of 83%, false-negative rate of 17%, precision of 54%, and F1-score of 59%; the abstract reports the combined system detected and located defects with 83% accuracy, with false-positive and false-negative rates of 46% and 17% for a 60-blade sample.
  • The best viewing perspectives for model training were 3, 4, 7, and 8, which are the perspectives most perpendicular to the airfoil; increased false positives correlated with decreased true positives and increased false negatives.
  • The decision-support tool reduced false positives by 16% by excluding detections at the blade root/dovetail; defect location was determined with 98.4% accuracy and defect depth estimation with 93.7% accuracy, with mean location errors of 3 px/0.9% in x, 8 px/1.3% in y, and 9 px/1.6% radially, and size errors of 9 px/6.3% for depth and 35 px/22.4% for height.
  • Detection time was 186–219 ms per blade, compared with an average human inspection time of 85 s for piece-part inspection and about 3 s for borescope inspection; the decision-support tool recommended the correct maintenance action in most cases.

Methods

  • Data: 80 high-pressure compressor blades from V2500 engines, stages 6–12, comprising 52 damaged and 28 non-damaged blades; defect proportions were 42% nicks, 38% dents, and 20% tears. Images were acquired with a standardized setup and eight camera perspectives; 33 blades were photographed from eight perspectives (264 images), and 47 blades from P3 and P7 (94 images).
  • Detection software: developed in Python 3.7.6 with OpenCV 4.3.0; processing included grayscale conversion, bilateral filtering, Canny edge detection, Suzuki contour extraction, an angle-difference heuristic with a threshold of π/12 rad, a 10×10 region grid, a ground-truth model from 20 non-defective blades, density comparison with a multiplier of 10, and DBSCAN clustering.
  • Decision-support tool: a rule-based lookup table using fictional limits by blade stage and zone; it compared defect location and depth against acceptance, repair, and reject thresholds, with performance evaluated against ground truth from a senior inspector with over 30 years of experience.

Limitations

  • Stated: the decision-support tool treats all detected defects as dents and nicks and cannot process tears, which always require rejection; defect classification is future work. The detector had difficulty with long smooth edge defects whose angle change fell below threshold, and although it detected all teared-off corners, computed bounding boxes were significantly smaller than actual defects, causing size and location discrepancies. The model comparison module uses only point densities, so shape is not represented, and defects near grid-region edges may be split and missed. No rare crack defect was present in the sample, data are not publicly available due to commercial sensitivity, and the maintenance limits are fictional.
  • Evident: the dataset is small (80 blades; 94-image test set), and the paper reports no direct same-dataset comparison between software and human inspector performance. The decision-support tool only processes positive detections from the detector (true positives and false positives), so false negatives are not handled.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/aerospace8020030

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Inspection workflow and hierarchy of levels of inspection. Figure 1. Inspection workflow and hierarchy of levels of inspection.
Figure 1 Inspection workflow and hierarchy of levels of inspection. Figure 1. Inspection workflow and hierarchy of levels of inspection.CC-BY · From the PDF
Figure 2 Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. Figure 2. Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. resulting in material separation and breakage of the entire blade under centrifugal load [14], which has the potential to cause severe damage to the engine and aircraft.
Figure 2 Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. Figure 2. Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. resulting in material separation and breakage of the entire blade under centrifugal load [14], which has the potential to cause severe damage to the engine and aircraft.CC-BY · From the PDF
Figure 4 Overview of research approach. Figure 4. Overview of research approach.
Figure 4 Overview of research approach. Figure 4. Overview of research approach.CC-BY · From the PDF
Figure 5 Sample blade defects: ( A ) nick on leading edge, ( B ) dent on trailing edge, ( C ) nick on leading edge, ( D ) teared-off corner, ( E ) dent on leading edge.
Figure 5 Sample blade defects: ( A ) nick on leading edge, ( B ) dent on trailing edge, ( C ) nick on leading edge, ( D ) teared-off corner, ( E ) dent on leading edge.CC-BY · From the PDF
Figure 6 Different blade perspectives. Figure 6. Different blade perspectives.
Figure 6 Different blade perspectives. Figure 6. Different blade perspectives.CC-BY · From the PDF
Figure 7 Architecture diagram of the detection system. Figure 7. Architecture diagram of the detection system.
Figure 7 Architecture diagram of the detection system. Figure 7. Architecture diagram of the detection system.CC-BY · From the PDF
Figure 8 Shows the points in the contour (blue) and the determination of the angle between Figure 8. Shows the points in the contour (blue) and the determination of the angle between points.
Figure 8 Shows the points in the contour (blue) and the determination of the angle between Figure 8. Shows the points in the contour (blue) and the determination of the angle between points.CC-BY · From the PDF
Figure 9 Current image processing procedure and defect detection output. Figure 9. Current image processing procedure and defect detection output.
Figure 9 Current image processing procedure and defect detection output. Figure 9. Current image processing procedure and defect detection output.CC-BY · From the PDF
Figure 11 Image coordinate system with origin at top left corner. Figure 11. Image coordinate system with origin at top left corner.
Figure 11 Image coordinate system with origin at top left corner. Figure 11. Image coordinate system with origin at top left corner.CC-BY · From the PDF
Figure 12 User interface of decision support tool (DST). Figure 12. User interface of decision support tool (DST).
Figure 12 User interface of decision support tool (DST). Figure 12. User interface of decision support tool (DST).CC-BY · From the PDF
Figure 13 Average false positive rates for each perspective. Figure 13. Average false positive rates for each perspective.
Figure 13 Average false positive rates for each perspective. Figure 13. Average false positive rates for each perspective.CC-BY · From the PDF
Figure 14 True positives and false positives proportions per perspective. Figure 14. True positives and false positives proportions per perspective.
Figure 14 True positives and false positives proportions per perspective. Figure 14. True positives and false positives proportions per perspective.CC-BY · From the PDF
Image 13
CC-BY · From the PDF
Image 14
CC-BY · From the PDF
Image 15
CC-BY · From the PDF

Verification

Claims the paper makes

14 Valid · 17 Not valid · 24 Not checked · 99 Own results and interpretations

50 more claims

Create a free account to see all 154 claims and to verify the 5 references still open.

See all claims — free account
  • Probably not a substantial claim. 70
  • It may state two separate claims as one. 52
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 82 references

Research works printed but not linked: 7

  1. Rao, 2014, Failure mechanisms in turbine blades of a gas turbine Engine—An overview, Int. J. Eng. Res. Dev., 10, 48
  2. Dewangan, 2015, Gas turbine blades—A critical review of failure at first and second stages, Int. J. Mech. Eng. Robot. Res., 4, 216
  3. Lufthansa Technik (2019, November 02). Mobile Robot for Fuselage Inspection (MORFI) at MRO Europe. Available online: http://www.lufthansa-leos.com/press-releases-content/-/asset_publisher/8kbR/content/press-release-morfi-media/10165.
  4. Tian, W., Pan, M., Luo, F., and Chen, D. (2008, January 20–21). Borescope Detection of Blade in Aeroengine Based on Image Recognition Technology. Proceedings of the International Symposium on Test Automation and Instrumentation (ISTAI), Beijing, China.
  5. and Agrawal, S. (2021, January 10). Glass Defect Detection Techniques Using Digital Image Processing–A Review. Available online: https://www.researchgate.net/profile/Sunil_Agrawal6/publication/266356384_Glass_Defect_Detection_Techniques_using_Digital_Image_Processing_-A_Review/links/5806f81008ae03256b76ff84.pdf.
  6. Cohen, S. (1995). Measuring Point Set Similarity with the Hausdorff Distance: Theory and Applications. [Ph.D. Thesis, Stanford University].
  7. Drury, C.G., and Fox, J.G. (1975). The imperfect inspector. Human Reliability in Quality Control, Halsted Press.

Cited by

See all 68

Metadata

Authors
Aust, J., Shankland, S., Pons, D., Mukundan, R., & Mitrovic, A.
Affiliations
  • University of Canterbury (NZ)
  • Department of Computer Science and Software Engineering, University of Canterbury, Christchurch 8041, New Zealand
Corresponding author
Aust, Jonas
Venue
Aerospace
Publisher
MDPI AG
Published
2021-01-26
Volume
8
Issue
2
Pages
30
ISSN
2226-4310 (ISSN-L)
OpenAlex
W3125286443
Cited by
66
References
82
Citations by year
2026: 13 · 2025: 15 · 2024: 13 · 2023: 5 · 2022: 13 · 2021: 7
FWCI
4.92
Type
journal article
Language
en
Open access
Locations
  • Aerospace (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • University of Canterbury Research Repository (University of Canterbury) (submittedVersion)
Funders
Christchurch Engine Centre (2018-01)
Topics
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
  • Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
  • Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
Keywords
automated defect detection, image processing, small datasets, decision support, maintenance recommendations, visual perspective, aircraft engine maintenance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection. https://app.cochat.ai/papers/10.3390/aerospace8020030
The paper
Aust, J., Shankland, S., Pons, D., Mukundan, R., & Mitrovic, A. (2021). Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection. Aerospace. https://doi.org/10.3390/aerospace8020030

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.