Automated Defect Detection and Decision-Support in Gas Turbine Blade Inspection
Open accessThe DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index; 19 of the 96 sources its claims cite were checked for support.
Abstract
Background—In the field of aviation, maintenance and inspections of engines are vitally important in ensuring the safe functionality of fault-free aircrafts. There is value in exploring automated defect detection systems that can assist in this process. Existing effort has mostly been directed at artificial intelligence, specifically neural networks. However, that approach is critically dependent on large datasets, which can be problematic to obtain. For more specialised cases where data are sparse, the image processing techniques have potential, but this is poorly represented in the literature. Aim—This research sought to develop methods (a) to automatically detect defects on the edges of engine blades (nicks, dents and tears) and (b) to support the decision-making of the inspector when providing a recommended maintenance action based on the engine manual. Findings—For a small sample test size of 60 blades, the combined system was able to detect and locate the defects with an accuracy of 83%. It quantified morphological features of defect size and location. False positive and false negative rates were 46% and 17% respectively based on ground truth. Originality—The work shows that image-processing approaches have potential value as a method for detecting defects in small data sets. The work also identifies which viewing perspectives are more favourable for automated detection, namely, those that are perpendicular to the blade surface.
Overview
CoChat Summary
TL;DR
This paper develops a heuristic image-processing system to detect edge defects on gas turbine compressor blades and a rule-based decision-support tool that recommends accept/repair/reject actions from engine-manual limits. On a small V2500 blade sample, the detector achieved 83% recall with 54% precision, and the decision tool reduced false positives by 16% while recommending correct maintenance actions in most cases.
Key findings
- In Experiment 2, across 94 images of 47 blades using perspectives P3 and P7, the detector achieved a true-positive/recall rate of 83%, false-negative rate of 17%, precision of 54%, and F1-score of 59%; the abstract reports the combined system detected and located defects with 83% accuracy, with false-positive and false-negative rates of 46% and 17% for a 60-blade sample.
- The best viewing perspectives for model training were 3, 4, 7, and 8, which are the perspectives most perpendicular to the airfoil; increased false positives correlated with decreased true positives and increased false negatives.
- The decision-support tool reduced false positives by 16% by excluding detections at the blade root/dovetail; defect location was determined with 98.4% accuracy and defect depth estimation with 93.7% accuracy, with mean location errors of 3 px/0.9% in x, 8 px/1.3% in y, and 9 px/1.6% radially, and size errors of 9 px/6.3% for depth and 35 px/22.4% for height.
- Detection time was 186–219 ms per blade, compared with an average human inspection time of 85 s for piece-part inspection and about 3 s for borescope inspection; the decision-support tool recommended the correct maintenance action in most cases.
Methods
- Data: 80 high-pressure compressor blades from V2500 engines, stages 6–12, comprising 52 damaged and 28 non-damaged blades; defect proportions were 42% nicks, 38% dents, and 20% tears. Images were acquired with a standardized setup and eight camera perspectives; 33 blades were photographed from eight perspectives (264 images), and 47 blades from P3 and P7 (94 images).
- Detection software: developed in Python 3.7.6 with OpenCV 4.3.0; processing included grayscale conversion, bilateral filtering, Canny edge detection, Suzuki contour extraction, an angle-difference heuristic with a threshold of π/12 rad, a 10×10 region grid, a ground-truth model from 20 non-defective blades, density comparison with a multiplier of 10, and DBSCAN clustering.
- Decision-support tool: a rule-based lookup table using fictional limits by blade stage and zone; it compared defect location and depth against acceptance, repair, and reject thresholds, with performance evaluated against ground truth from a senior inspector with over 30 years of experience.
Limitations
- Stated: the decision-support tool treats all detected defects as dents and nicks and cannot process tears, which always require rejection; defect classification is future work. The detector had difficulty with long smooth edge defects whose angle change fell below threshold, and although it detected all teared-off corners, computed bounding boxes were significantly smaller than actual defects, causing size and location discrepancies. The model comparison module uses only point densities, so shape is not represented, and defects near grid-region edges may be split and missed. No rare crack defect was present in the sample, data are not publicly available due to commercial sensitivity, and the maintenance limits are fictional.
- Evident: the dataset is small (80 blades; 94-image test set), and the paper reports no direct same-dataset comparison between software and human inspector performance. The decision-support tool only processes positive detections from the detector (true positives and false positives), so false negatives are not handled.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. Figure 2. Cross section of a V2500 gas turbine engine with highlighted compressor blades in yellow and exposed sample. Image adapted from [12]. resulting in material separation and breakage of the entire blade under centrifugal load [14], which has the potential to cause severe damage to the engine and aircraft.](https://figures.cochat.ai/paper-figures/677b258b296340a1b5594bbbe81d3125/automated-defect-detection-and-decision-support-in-gas-turbine-blade-inspection-figure-2.png)













Verification
Claims the paper makes
14 Valid · 17 Not valid · 24 Not checked · 99 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Hence, the neural network method critically depends on relatively larger training and test datasets compared to image processing methods [52-54].”
What the sources say
- Not checked — no full text of the sourcecites [52] 52. Chu, C.; Hsu, A.L.; Chou, K.H.; Bandettini, P.; Lin, C. Does feature selection improve classification accuracy? Impact of sample size and feature selection on classification using anatomical magnetic resonance images. Neuroimage 2012 , 60 , 59-70. (In English) [CrossRef] [PubMed] source
- Partly supportedcites [53] 53. Cho, J.; Lee, K.; Shin, E.; Choy, G.; Do, S. How much data is needed to train a medical image deep learning system to achieve necessary high accuracy. arXiv 2015 , arXiv:1511.06348v2. sourceExperimental — accuracy not yet measured
The Results and Discussions (p. 6) report that larger training sets improved this CNN’s classification accuracy, supporting the training-data portion. The paper does not establish that neural networks require larger training or test datasets than image-processing methods; it reports using 6,000 test images but makes no comparative claim about test-set requirements. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [54] 54. Foody, G.M. Sample size determination for image classification accuracy assessment and comparison. Int. J. Remote Sens. 2009 , 30 , 5273-5291. [CrossRef] source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“There is a lack of recent applications of these techniques to blade inspection. In fact, the field is somewhat weak and has been dominated by the neural networks and deep learning approaches instead [9,19,47,85].”
What the sources say
- Not checked — no full text of the sourcecites [9] 9. Shen, Z.; Wan, X.; Ye, F.; Guan, X.; Liu, S. Deep Learning based Framework for Automatic Damage Detection in Aircraft Engine Borescope Inspection. In Proceedings of the 2019 International Conference on Computing, Networking and Communications (ICNC), Honolulu, HI, USA, 18-21 February 2019; pp. 1005-1010. source
- Could not verifycites [19] 19. Malekzadeh, T.; Abdollahzadeh, M.; Nejati, H.; Cheung, N.-M. Aircraft Fuselage Defect Detection using Deep Neural Networks. arXiv 2017 , arXiv:1712.09213v2. sourceExperimental — accuracy not yet measured
The Introduction (p. 1) discusses a lack of prior automatic image-based aircraft defect detection, but the paper studies fuselage defects, not blade inspection. Searches for blade inspection and classical image-processing applications found no passage assessing whether recent blade-inspection work using those techniques is scarce. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [47] 47. Bian, X.; Lim, S.N.; Zhou, N. Multiscale fully convolutional network with application to industrial inspection. In Proceedings of the IEEE Winter Conference on Applications of Computer Vision (WACV), Lake Placid, NY, USA, 7-9 March 2016; pp. 1-8. source
- Could not verifycites [85] 85. Svensen, M.; Hardwick, D.; Powrie, H. Deep Neural Networks Analysis of Borescope Images. In Proceedings of the European Conference of the PHM Society, Utrecht, The Netherlands, 3-6 July 2018. sourceExperimental — accuracy not yet measured
The Abstract describes this paper’s use of deep neural networks for borescope images, and the Conclusion and Discussion mentions another neural-network application to turbine-blade images. Neither passage assesses how many recent blade-inspection studies use classical image processing. Searches for classical and traditional image-processing approaches found no such assessment in our copy. (LLM, conf=0.73)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, they require significant amounts of data to accurately perform a classification, especially with increasing number of classes [52-54].”
What the sources say
- Not checked — no full text of the sourcecites [52] 52. Chu, C.; Hsu, A.L.; Chou, K.H.; Bandettini, P.; Lin, C. Does feature selection improve classification accuracy? Impact of sample size and feature selection on classification using anatomical magnetic resonance images. Neuroimage 2012 , 60 , 59-70. (In English) [CrossRef] [PubMed] source
- Partly supportedcites [53] 53. Cho, J.; Lee, K.; Shin, E.; Choy, G.; Do, S. How much data is needed to train a medical image deep learning system to achieve necessary high accuracy. arXiv 2015 , arXiv:1511.06348v2. sourceExperimental — accuracy not yet measured
The Learning Curve section (p. 4) says classification accuracy depends heavily on training-set size, and Results and Discussions (p. 6) estimates that this classifier needs 4,092 images per class to reach its target accuracy. The study uses six fixed anatomical classes; it does not test whether increasing the number of classes increases the amount of data needed. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [54] 54. Foody, G.M. Sample size determination for image classification accuracy assessment and comparison. Int. J. Remote Sens. 2009 , 30 , 5273-5291. [CrossRef] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In contrast, the minimum number of images for traditional image processing approaches is much less, of the order of about 10-100 [82,83].”
What the sources say
- Partly supportedcites [82] 82. Kim, K.-B.; Woo, Y.-W. Defect Detection in Ceramic Images Using Sigma Edge Information and Contour Tracking Method. Int. J. Electr. Comput. Eng. (IJECE) 2016 , 6 , 160. [CrossRef] sourceExperimental — accuracy not yet measured
The Experiment and Result Analyses section reports testing the proposed image-processing method on 12 ceramic images, a number within the claimed range. It does not say that 12—or 10–100—is the minimum number required, or establish a minimum for traditional image-processing approaches generally. (LLM, conf=0.78)
- Not matchedcites [83] 83. [Nishu; Agrawal, S. Glass Defect Detection Techniques Using Digital Image Processing-A Review. 2021. Available online: https://www.researchgate.net/profile/Sunil\_Agrawal6/publication/266356384\_Glass\_Defect\_Detection\_Techniques\_ using\_Digital\_Image\_Processing\_-A\_Review/links/5806f81008ae03256b76ff84.pdf (accessed on 10 January 2021).](https://www.researchgate.net/profile/Sunil_Agrawal6/publication/266356384_Glass_Defect_Detection_Techniques_using_Digital_Image_Processing_-A_Review/links/5806f81008ae03256b76ff84.pdf)
We searched by its title and found no matching paper.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The detection rate is comparable with the performance of neural networks in the reviewed literature [21,35,42,48], which ranged from 64.4% to 85%.”
What the sources say
- Partly supportedcites [21] 21. Dogru, A.; Bouarfa, S.; Arizar, R.; Aydogan, R. Using Convolutional Neural Networks to Automate Aircraft Maintenance Visual Inspection. Aerospace 2020 , 7 , 171. [CrossRef] sourceExperimental — accuracy not yet measured
Appendix A, Table 3 reports recall values for this paper’s neural-network dent-detection experiments, including 64.08% and 69.97%, providing an example broadly within the claimed range. It does not establish that detection rates across the reviewed literature ranged from 64.4% to 85%, or explicitly make the claimed comparison. (LLM, conf=0.78)
- Not matchedcites [35] 35. Tian, W.; Pan, M.; Luo, F.; Chen, D. Borescope Detection of Blade in Aeroengine Based on Image Recognition Technology. In Proceedings of the International Symposium on Test Automation and Instrumentation (ISTAI), Beijing, China, 20-21 November 2008; pp. 1694-1698.
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [42] 42. Shipway, N.J.; Barden, T.J.; Huthwaite, P.; Lowe, M.J.S. Automated defect detection for Fluorescent Penetrant Inspection using Random Forest. NDT E Int. 2018 , 101 . [CrossRef] source
- Partly supportedcites [48] 48. Wang, K. Volume CT Data Inspection and Deep Learning Based Anomaly Detection for Turbine Blade. Ph.D. Thesis, University of Cincinnati, Cincinnati, OH, USA, 2017.Experimental — accuracy not yet measured
The results table (Additional information, pp. 45–49) gives CNN2 an average error rate of 14.8991%, corresponding to approximately 85% accuracy. It does not give a 64.4% detection rate or establish the stated 64.4%–85% range; Section 3.7 (pp. 50–52) reports error rates below 0.5% for other network tests. (LLM, conf=0.79)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
50 more claims
Create a free account to see all 154 claims and to verify the 5 references still open.
- Probably not a substantial claim. 70
- It may state two separate claims as one. 52
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 4.2.2. Decision Output and Recommended Maintenance Action · p. 18
“The defect size had a computation error of 9 pixels or 6.3% for the depth and 35 pixels or 22.4% for the height.”
§ 4.2.2. Decision Output and Recommended Maintenance Action · p. 19
“the defect height had a much bigger error with a mean discrepancy of 29%.”
Citations
Cites
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589 · cited 1×
“The approach used the scale invariant feature transform (SIFT) algorithm [44,45] and principal component analysis to produce a damage representation, which is then compared with input images.”
Method(1996) · Cited by 20,179
Object recognition from local scale-invariant features
Lowe, D. G. (1999) · Proceedings of the Seventh IEEE International Conference on Computer Vision · doi:10.1109/iccv.1999.790410 · Cited by 16,472 · cited 1×
“The approach used the scale invariant feature transform (SIFT) algorithm [44,45] and principal component analysis to produce a damage representation, which is then compared with input images.”
MethodTopological structural analysis of digitized binary images by border following
Suzuki, S., & be, K. (1985) · Computer Vision, Graphics, and Image Processing · doi:10.1016/0734-189x(85)90016-7 · Cited by 2,663 · cited 1×
“The Suzuki algorithm [88] is then applied to the found edges in order to extract contours and order them in a hierarchical structure.”
MethodRevisiting Unreasonable Effectiveness of Data in Deep Learning Era
Sun, C., Shrivastava, A., Singh, S., & Gupta, A. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.97 · Cited by 2,484 · cited 1×
“[77] used 300 million images to train a neural network.”
MethodLearning methods for generic object recognition with invariance to pose and lighting
LeCun, Y., Huang, F. J., & Bottou, L. (2004) · Proceedings of the 2004 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2004. CVPR 2004. · doi:10.1109/cvpr.2004.1315150 · Cited by 1,324
A universal noise removal algorithm with an impulse detector
Garnett, R., Huegerich, T., Chui, C., & He, W. (2005) · IEEE Transactions on Image Processing · doi:10.1109/tip.2005.857261 · Cited by 615 · cited 1×
“Of the image-processing algorithms, positive results have been shown for bilateral filtering and Gaussian blur algorithms [49,50].”
MethodOn Loss Functions for Deep Neural Networks in Classification
Janocha, K., & Czarnecki, W. M. (2017) · Schedae Informaticae · doi:10.4467/20838476si.16.004.6185 · Cited by 591 · cited 1×
“Typically, neural networks are used for classification tasks [51].”
MethodRecent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components
Ciampa, F., Mahmoodi, P., Pinto, F., & Meo, M. (2018) · Sensors · doi:10.3390/s18020609 · Cited by 568 · cited 1×
“This encompasses mainly crack detection [9,33,37,38,42], as this is the most critical type of defect and the main source of failure.”
BackgroundMachine learning to classify animal species in camera trap images: Applications in ecology
Tabak, M. A., Norouzzadeh, M. S., Wolfson, D. W., Sweeney, S. J., Vercauteren, K. C., Snow, N. P., Halseth, J. M., Di Salvo, P. A., Lewis, J. S., White, M. D., et al. (2019) · Methods in Ecology and Evolution · doi:10.1111/2041-210x.13120 · Cited by 504
Adaptive Bilateral Filter for Sharpness Enhancement and Noise Removal
Zhang, B., & Allebach, J. P. (2008) · IEEE Transactions on Image Processing · doi:10.1109/tip.2008.919949 · Cited by 403
Chu, C., Hsu, A.-L., Chou, K.-H., Bandettini, P., & Lin, C. (2012) · NeuroImage · doi:10.1016/j.neuroimage.2011.11.066 · Cited by 319
Balki, I., Amirabadi, A., Levman, J., Martel, A. L., Emersic, Z., Meden, B., Garcia-Pedrero, A., Ramirez, S. C., Kong, D., Moody, A. R., et al. (2019) · Canadian Association of Radiologists Journal · doi:10.1016/j.carj.2019.06.002 · Cited by 299
Mei, S., Wang, Y., & Wen, G. (2018) · Sensors · doi:10.3390/s18041064 · Cited by 284
Cho, J., Lee, K., Shin, E., Choy, G., & Do, S. (2015) · arXiv · doi:10.48550/arxiv.1511.06348 · Cited by 268
Sample size determination for image classification accuracy assessment and comparison
Foody, G. M. (2009) · International Journal of Remote Sensing · doi:10.1080/01431160903130937 · Cited by 248
Topological structural analysis of digitized binary images by border following
Suzuki, S., & Abe, K. (1985) · Computer Vision, Graphics, and Image Processing · doi:10.1016/0734-189x(85)90136-7 · Cited by 239
Shahinfar, S., Meek, P., & Falzon, G. (2020) · Ecological Informatics · doi:10.1016/j.ecoinf.2020.101085 · Cited by 229 · cited 1×
“Good accuracies with reasonable classification results can be achieved with sample sizes as small as 150–500 images per class [76].”
BackgroundFernandez Alcon, J., Ciuhu, C., ten Kate, W., Heinrich, A., Uzunbajakava, N., Krekels, G., Siem, D., & de Haan, G. (2009) · IEEE Journal of Selected Topics in Signal Processing · doi:10.1109/jstsp.2008.2011156 · Cited by 210
Novel Feature Selection and Voting Classifier Algorithms for COVID-19 Classification in CT Images
El-Kenawy, E.-S. M., Ibrahim, A., Mirjalili, S., Eid, M. M., & Hussein, S. E. (2020) · IEEE Access · doi:10.1109/access.2020.3028012 · Cited by 197 · cited 1×
“A recent example in the medical field for COVID-19 detection used a dataset of 1128 images [81].”
MethodDistance measures for point sets and their computation
Eiter, T., & Mannila, H. (1997) · Acta Informatica · doi:10.1007/s002360050075 · Cited by 189
Rapid thermal non-destructive testing of aircraft components
Bates, D., Smith, G., Lu, D., & Hewitt, J. (2000) · Composites Part B Engineering · doi:10.1016/s1359-8368(00)00005-6 · Cited by 145
Smart Maintenance Decision Support Systems (SMDSS) based on corporate big data analytics
Bumblauskas, D., Gemmill, D., Igou, A., & Anzengruber, J. (2017) · Expert Systems with Applications · doi:10.1016/j.eswa.2017.08.025 · Cited by 120 · cited 1×
“Most literature on decision support systems in the maintenance domain focused on preventive and predictive models to forecast and prioritise maintenance activities [70].”
BackgroundWang, W.-C., Chen, S.-L., Chen, L.-B., & Chang, W.-J. (2017) · IEEE Access · doi:10.1109/access.2016.2631658 · Cited by 118
Decision Support System for Inspection and Maintenance: A Case Study of Oil Pipelines
Dey, P. K. (2004) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2003.822464 · Cited by 111
A survey of serious aircraft accidents involving fatigue fracture
CAMPBELL, G., & LAHEY, R. (1984) · International Journal of Fatigue · doi:10.1016/0142-1123(84)90005-7 · Cited by 107 · cited 1×
“Ultimately, this has the potential to improve aviation safety through reduction of accidents in which defects were missed during the inspection task [10,11].”
BackgroundEvaluating the effect of dataset size on predictive model using supervised learning technique
Ajiboye, A. R., Abdullah-Arshah, R., Qin, H., & Isah-Kebbe, H. (2015) · International Journal of Computer Systems & Software Engineering · doi:10.15282/ijsecs.1.2015.6.0006 · Cited by 104
Visual inspection: a review of the literature
(NNSA), U. N. N. S. A., See, J., & Sandia National Lab. (SNL-NM), A. (2012) · doi:10.2172/1055636 · Cited by 99
Automated defect detection for Fluorescent Penetrant Inspection using Random Forest
Shipway, N. J., Barden, T. J., Huthwaite, P., & Lowe, M. J. S. (2019) · NDT & E International · doi:10.1016/j.ndteint.2018.10.008 · Cited by 87 · cited 4×
“Some researchers only reported the TP rate [35,42] or the FP and FN rates [20], while others reported the error rate [48], detection rate [21,43] or accuracy [43], and still, others made it dependent of the defect size and used a probability of detection curve [33].”
BackgroundMethodResultInfluentialUsing Convolutional Neural Networks to Automate Aircraft Maintenance Visual Inspection
Dogru, A., Bouarfa, S., Arizar, R., & Aydogan, R. (2020) · doi:10.20944/preprints202011.0527.v1 · Cited by 86
Failure analysis of an un-cooled turbine blade in an aero gas turbine engine
Mishra, R. K., Thomas, J., Srinivasan, K., Nandi, V., & Raghavendra Bhatt, R. (2017) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2017.05.042 · Cited by 85
Failure analysis of gas turbine rotor blades
Kumari, S., Satyanarayana, D. V. V., & Srinivas, M. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.06.003 · Cited by 82
On Loss Functions for Deep Neural Networks in ClassificationPreprint
Janocha, K., & Czarnecki, W. M. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1702.05659 · Cited by 76
Zhang, X., Li, W., & Liou, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1413-8 · Cited by 73 · cited 1×
“parts such as shafts [31,32], fan blades [20,33], compressor blades [9,34,35] and turbine blades [9,26,36–43] are also of particular interest as all are safety-critical to flight operations.”
BackgroundMultiscale fully convolutional network with application to industrial inspection
Bian, X., Lim, S. N., & Zhou, N. (2016) · 2016 IEEE Winter Conference on Applications of Computer Vision (WACV) · doi:10.1109/wacv.2016.7477595 · Cited by 72 · cited 3×
“Other research using CNN techniques have explored detection of cracking in wind turbine blades [46], cracking on the surfaces of compressor blades in jet engines [9] and detection of surface erosion on turbine blades in jet engines [47].”
BackgroundMethodTaxonomy of Gas Turbine Blade Defects
Aust, J., & Pons, D. (2019) · Aerospace · doi:10.3390/aerospace6050058 · Cited by 68 · cited 1×
“Overview of edge defects and their characteristics (Taxonomy adapted from [15]).”
BackgroundSelf-citationAutomatic detection of impact damage in carbon fiber composites using active thermography
Usamentiaga, R., Venegas, P., Guerediaga, J., Vega, L., & López, I. (2013) · Infrared Physics & Technology · doi:10.1016/j.infrared.2013.01.004 · Cited by 67
Machine learning to classify animal species in camera trap images: applications in ecologyPreprint
Tabak, M. A., Norouzzadeh, M. S., Wolfson, D. W., et al. (2018) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/346809 · Cited by 60
Witek, L. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.07.002 · Cited by 56 · cited 2×
“Detecting those defect types is important as they can lead to fatigue cracks [13] resulting in material separation and breakage of the entire blade under centrifugal load [14], which has the potential to cause severe damage to the engine and aircraft.”
BackgroundA robust and accurate automated registration method for turbine blade precision metrology
He, W., Li, Z., Guo, Y., Cheng, X., Zhong, K., & Shi, Y. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2173-9 · Cited by 49
Intelligent Thermal Imaging-Based Diagnostics of Turbojet Engines
Andoga, R., Fözö, L., Schrötter, M., Češkovič, M., Szabó, S., Bréda, R., & Schreiner, M. (2019) · Applied Sciences · doi:10.3390/app9112253 · Cited by 46
Deep Learning based Framework for Automatic Damage Detection in Aircraft Engine Borescope Inspection
Shen, Z., Wan, X., Ye, F., Guan, X., & Liu, S. (2019) · 2019 International Conference on Computing, Networking and Communications (ICNC) · doi:10.1109/iccnc.2019.8685593 · Cited by 45 · cited 7×
“This encompasses mainly crack detection [9,33,37,38,42], as this is the most critical type of defect and the main source of failure.”
BackgroundMethodInfluentialDetecting cracks in aircraft engine fan blades using vibrothermography nondestructive evaluation
Gao, C., Meeker, W. Q., & Mayton, D. (2014) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2014.05.009 · Cited by 44 · cited 3×
“Some researchers only reported the TP rate [35,42] or the FP and FN rates [20], while others reported the error rate [48], detection rate [21,43] or accuracy [43], and still, others made it dependent of the defect size and used a probability of detection curve [33].”
BackgroundMethodKim, Y.-H., & Lee, J.-R. (2019) · Structural Health Monitoring · doi:10.1177/1475921719830328 · Cited by 44 · cited 4×
“[43] are presented in a coordinate system, so that the inspector can read of the values, but this is a manual process and has not been automated yet.”
BackgroundMethodInfluentialAdaptive Bilateral Filter for Sharpness Enhancement and Noise Removal
Zhang, B., & Allebach, J. P. (2007) · Proceedings - International Conference on Image Processing · doi:10.1109/icip.2007.4380043 · Cited by 44
Aircraft Fuselage Defect Detection using Deep Neural Networks
Malekzadeh, T., Abdollahzadeh, M., Nejati, H., & Cheung, N.-M. (2017) · arXiv · doi:10.48550/arxiv.1712.09213 · Cited by 42 · cited 1×
“In fact, the field is somewhat weak and has been dominated by the neural networks and deep learning approaches instead [9,19,47,85].”
BackgroundGeneralized Procrustes Analysis: A Tool for Exploring Aggregates and Persons
Grice, J. W., & Assad, K. K. (2009) · Applied Multivariate Research · doi:10.22329/amr.v13i1.2836 · Cited by 41 · cited 1×
“Furthermore, when comparing a defect cluster to the modelled cluster a Procrustes analysis [95] might be used to measure shape similarity between the two clusters.”
MethodTang, Q., Dai, J., Liu, J., Liu, C., Liu, Y., & Ren, C. (2016) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.05.027 · Cited by 40 · cited 1×
“5 mm) with a percentage error of 10% [100].”
BackgroundA New Vision-Based Method Using Deep Learning for Damage Inspection in Wind Turbine Blades
Moreno, S., Pena, M., Toledo, A., Trevino, R., & Ponce, H. (2018) · 2018 15th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE) · doi:10.1109/iceee.2018.8533924 · Cited by 40 · cited 1×
“Other research using CNN techniques have explored detection of cracking in wind turbine blades [46], cracking on the surfaces of compressor blades in jet engines [9] and detection of surface erosion on turbine blades in jet engines [47].”
MethodFailure Analysis of Gas Turbine Rotor Blades
Zheng, L. (2008) · Failure Analysis and Prevention · Cited by 38
Fatigue fracture analysis of gas turbine compressor blades
Mokaberi, A., Derakhshandeh-Haghighi, R., & Abbaszadeh, Y. (2015) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2015.08.026 · Cited by 32 · cited 2×
“Detecting those defect types is important as they can lead to fatigue cracks [13] resulting in material separation and breakage of the entire blade under centrifugal load [14], which has the potential to cause severe damage to the engine and aircraft.”
BackgroundAutomatic Inspection System Using Machine Vision
Khan, J. I. U. S. (2006) · IEEE Applied Imagery Pattern Recognition Workshop · doi:10.1109/aipr.2005.20 · Cited by 25 · cited 1×
“Hence, there has been work to approximate the real defect shape [63,64].”
BackgroundBeyond the black box: the forensics of airplane crashes
(2008) · Choice Reviews Online · doi:10.5860/choice.45-5601 · Cited by 23 · cited 1×
“Ultimately, this has the potential to improve aviation safety through reduction of accidents in which defects were missed during the inspection task [10,11].”
BackgroundJiménez-Pulido, C., Jiménez-Rivero, A., & Navarro, J. G. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102184 · Cited by 21
Measuring Human Detection Performance in Aircraft Visual Inspection
Drury, C. G., Spencer, F. W., & Schurman, D. L. (1997) · Proceedings of the Human Factors and Ergonomics Society Annual Meeting · doi:10.1177/107118139704100168 · Cited by 19 · cited 1×
“In aircraft visual inspection in particular, the defect detection rate was stated to be 68% to 74% [42,99].”
BackgroundGhidoni, S., Antonello, M., Nanni, L., & Menegatti, E. (2015) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2015.07.020 · Cited by 18 · cited 1×
“parts such as shafts [31,32], fan blades [20,33], compressor blades [9,34,35] and turbine blades [9,26,36–43] are also of particular interest as all are safety-critical to flight operations.”
BackgroundDeep Neural Networks Analysis of Borescope Images
Svensen, M., Powrie, H. E. G., & Hardwick, D. S. (2018) · PHM Society European Conference · doi:10.36001/phme.2018.v4i1.401 · Cited by 17
Bibel, G. (2007) · doi:10.56021/9780801886317 · Cited by 17
Efficient critical area estimation for arbitrary defect shapes
Allan, G. A., & Walton, A. J. (2002) · Proceedings · doi:10.1109/dftvs.1997.628305 · Cited by 16 · cited 1×
“Hence, there has been work to approximate the real defect shape [63,64].”
BackgroundAirplane tire inspection by image processing techniques
Jovancevic, I., Arafat, A., Orteu, J.-J., & Sentenac, T. (2016) · 2016 5th Mediterranean Conference on Embedded Computing (MECO) · doi:10.1109/meco.2016.7525733 · Cited by 16 · cited 1×
“In aviation, automated inspection systems have been developed for detecting damages on aircraft wings and fuselage [16–21], tyres [22], engines and composite parts [16,23–26].”
MethodImage processing for automatic surface defect detection
Coulthard, M. A. (1989) · Cited by 13
Automated visual inspection of an airplane exterior
Jovančević, I., Orteu, J.-J., Sentenac, T., & Gilblas, R. (2015) · SPIE Proceedings · doi:10.1117/12.2182811 · Cited by 13 · cited 2×
“Some researchers only reported the TP rate [35,42] or the FP and FN rates [20], while others reported the error rate [48], detection rate [21,43] or accuracy [43], and still, others made it dependent of the defect size and used a probability of detection curve [33].”
BackgroundMethodCommon Failures In Gas Turbine Blade: A Critical Review
Rani*, D. S. (2018) · Zenodo · doi:10.5281/zenodo.1207071 · Cited by 13
Transmission System Equipment Maintenance: On-line Use of Circuit Breaker Condition Data
Natti, S., & Kezunović, M. (2007) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2007.386001 · Cited by 11
Perner, P. (2018) · International Journal of Computer & Software Engineering · doi:10.15344/2456-4451/2018/139 · Cited by 11
Automatic classification and accurate size measurement of blank mask defects
Samir, B., Paninjath, S., Pereira, M. P., & Buck, P. D. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2198001 · Cited by 10
A transformer health assessment ranking method: Use of model based scoring expert system
Gao, Z., McCalley, J. D., & Meeker, W. Q. (2009) · North American Power Symposium (NAPS) · doi:10.1109/naps.2009.5483992 · Cited by 10
Błachnio, J., Spychała, J., Pawlak, W., et al. (2012) · Journal of Konbin · doi:10.2478/jok-2013-0004 · Cited by 9
(2018) · Cited by 9
Challenges faced in applying 3D noncontact metrology to turbine engine blade inspection
Ross, J., Harding, K. G., & Hogarth, E. (2011) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.895477 · Cited by 8
Application of Wavelet Transform in Image Processing in Aviation Engine Damage
Qin, Y. F., Cao, J. B., & Cao, J. Q. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.347-350.3576 · Cited by 5 · cited 2×
“The challenge with automating this form of inspection is the inconsistent camera position and orientation, in combination with the challenging environment [8,9].”
BackgroundTriangulating laser system for measurements and inspection of turbine blades
Klimanov, M. M. (2009) · Measurement Techniques · doi:10.1007/s11018-009-9347-7 · Cited by 5
Defect Detection in Ceramic Images Using Sigma Edge Information and Contour Tracking Method
Kim, K.-B., & Woo, Y. W. (2016) · International Journal of Electrical and Computer Engineering (IJECE) · doi:10.11591/ijece.v6i1.pp160-166 · Cited by 5
Improvement in accuracy of defect size measurement by automatic defect classification
Samir, B., Pereira, M., Paninjath, S., Jeon, C.-U., Chung, D.-H., Yoon, G.-S., & Jung, H.-Y. (2015) · SPIE Proceedings · doi:10.1117/12.2202511 · Cited by 5 · cited 1×
“In automatic visual inspection systems, traditional approaches use the bounding box or the horizontal cross-section of the detected defect to estimate the defect size [61,62].”
MethodDefect Detection in Ceramic Images Using Sigma Edge Information and Contour Tracking Method
Kim, K.-B., & Woo, Y. W. (2016) · International Journal of Electrical and Computer Engineering (IJECE) · doi:10.11591/ijece.v6i1.9343 · Cited by 5
Barber, R., Zwilling, V., & Salichs, M. A. (2014) · Sensors · doi:10.3390/s140202476 · Cited by 4
Object Dimension Estimation for Remote Visual Inspection in Borescope Systems
Kim, H., & Park, Y.-S. (2019) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2019.08.019 · Cited by 4 · cited 1×
“The situation can be improved by providing a scaled measurement grid [60].”
BackgroundAutomated Ultrasonic Testing of Billets for Gas-Turbine Engine Shafts
Vakhov, V. V., Veretennikov, I. B., & P’yankov, V. A. (2005) · Russian Journal of Nondestructive Testing · doi:10.1007/s11181-005-0142-5 · Cited by 3 · cited 1×
“parts such as shafts [31,32], fan blades [20,33], compressor blades [9,34,35] and turbine blades [9,26,36–43] are also of particular interest as all are safety-critical to flight operations.”
BackgroundRobust and consistent defect size measuring method in Automated Vision Inspection system
Joo, Y.-B., Huh, K.-M., Hong, C.-S., & Park, K.-H. (2009) · 2009 IEEE International Conference on Control and Automation · doi:10.1109/icca.2009.5410596 · Cited by 3 · cited 1×
“Volume-based measuring methods have been attempted [65], though is less suitable for edge defects, where material is deformed or missing, and thus, there is no depth to measure.”
Chen, T. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.423-426.2386 · Cited by 2
(2017) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 1
Towards automatic defect detection in carbon fiber composites using active thermography
Usamentiaga, R., Venegas, P., Guerediaga, J., & Vega, L. (2014) · International Conference on Quantitative InfraRed Thermography (QIRT) · doi:10.21611/qirt.2014.063 · Cited by 1
Research works printed but not linked: 7
- Rao, 2014, Failure mechanisms in turbine blades of a gas turbine Engine—An overview, Int. J. Eng. Res. Dev., 10, 48
- Dewangan, 2015, Gas turbine blades—A critical review of failure at first and second stages, Int. J. Mech. Eng. Robot. Res., 4, 216
- 29. Lufthansa Technik. Mobile Robot for Fuselage Inspection (MORFI) at MRO Europe. Available online: http://www. lufthansa-leos.com/press-releases-content/-/asset\_publisher/8kbR/content/press-release-morfi-media/10165 (accessed on 2 November 2019).
- 35. Tian, W.; Pan, M.; Luo, F.; Chen, D. Borescope Detection of Blade in Aeroengine Based on Image Recognition Technology. In Proceedings of the International Symposium on Test Automation and Instrumentation (ISTAI), Beijing, China, 20-21 November 2008; pp. 1694-1698.
- 83. [Nishu; Agrawal, S. Glass Defect Detection Techniques Using Digital Image Processing-A Review. 2021. Available online: https://www.researchgate.net/profile/Sunil\_Agrawal6/publication/266356384\_Glass\_Defect\_Detection\_Techniques\_ using\_Digital\_Image\_Processing\_-A\_Review/links/5806f81008ae03256b76ff84.pdf (accessed on 10 January 2021).](https://www.researchgate.net/profile/Sunil_Agrawal6/publication/266356384_Glass_Defect_Detection_Techniques_using_Digital_Image_Processing_-A_Review/links/5806f81008ae03256b76ff84.pdf)
- 92. Cohen, S. Measuring Point Set Similarity with the Hausdorff Distance: Theory and Applications. Ph.D. Thesis, Stanford University, Stanford, CA, USA, 1995.
- 97. Drury, C.G.; Fox, J.G. The imperfect inspector. In Human Reliability in Quality Control ; Halsted Press: Sydney, Australia, 1975; pp. 11-16.
Cited by
Alatorre, D., Robles-Linares, J. A., Russo, M., et al. (2022) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2022.3223220 · Cited by 85
“For example, the components within a gas turbine can only be accessed through narrow channels, such as borescope ports and a reach of several meters [1], [2].”
BackgroundZhang, J., Cosma, G., & Watkins, J. (2021) · Journal of Imaging · doi:10.3390/jimaging7030046 · Cited by 93
Shang, H., Wu, J., Sun, C., Liu, J., Chen, X., & Yan, R. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3222300 · Cited by 66
Surface Defect Detection of Aeroengine Blades Based on Cross-Layer Semantic Guidance
Song, K., Sun, X., Ma, S., & Yan, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3276026 · Cited by 71
“Aust et al. [25] proposed an image processing method for the automatic detection of blade damage.”
MethodAust, J., & Pons, D. J. (2022) · Applied Sciences · doi:10.3390/app12042250 · Cited by 69
Self-citation
Metadata
- Authors
- Aust, J., Shankland, S., Pons, D., Mukundan, R., & Mitrovic, A.
- Affiliations
- University of Canterbury (NZ)
- Department of Computer Science and Software Engineering, University of Canterbury, Christchurch 8041, New Zealand
- Corresponding author
- Aust, Jonas
- Venue
- Aerospace
- Publisher
- MDPI AG
- Published
- 2021-01-26
- Volume
- 8
- Issue
- 2
- Pages
- 30
- ISSN
- 2226-4310 (ISSN-L)
- OpenAlex
- W3125286443
- Cited by
- 66
- References
- 82
- Citations by year
- 2026: 13 · 2025: 15 · 2024: 13 · 2023: 5 · 2022: 13 · 2021: 7
- FWCI
- 4.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Aerospace (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- University of Canterbury Research Repository (University of Canterbury) (submittedVersion)
- Funders
- Christchurch Engine Centre (2018-01)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- automated defect detection, image processing, small datasets, decision support, maintenance recommendations, visual perspective, aircraft engine maintenance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.