Pyrolysis Kinetics of Physical Components of Wood and Wood-Polymers Using Isoconversion Method
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Two hardwood species, namely red oak and yellow-poplar, were separated into their bark, sapwood and heartwood components. The samples were tested for calorific value, specific gravity, proximate analysis, mineral composition, chemical composition, ultimate analysis, and thermo-chemical decomposition behavior. In addition, the thermo-chemical decomposition behaviors of cellulose, xylan, and lignin polymers were also tested. Thermo-chemical decomposition behavior was assessed using a thermo-gravimetric (TGA) system by heating the sample from 50 °C to 700 °C at the heating rates of 10, 30 and 50 °C/min under nitrogen. The activation energy was calculated for various fractional conversion values using the isoconversion method. The results showed that char yields of lignin, cellulose and xylan were 41.43%, 4.45% and 1.89%, respectively, at the end of pyrolysis. Furthermore, cellulose, xylan and lignin decomposed dramatically in the temperature range of 320 °C to 360 °C, 150 °C to 230 °C and 100 °C to 410 °C, respectively, with decomposition peaks occurring at 340 °C, 200 °C and 340 °C, respectively. In addition, the maximum activation energy for cellulose was 381 kJ/mol at 360 °C and for xylan it was 348 kJ/mol at 210 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 7×
“Unlike cellulose, which has only glucose in its chain structure, hemicellulose contains heteropolysaccharide and thermally degrades in the temperature range of 130–194 °C [14].”
BackgroundMethodInfluentialWood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623 · cited 2×
“However, in practical situations, actual maximum bio-char yields on an ash-free basis were reported to be 57% (chestnut wood) and 80% (oak wood) of their respective fixed carbon contents [16].”
BackgroundTechno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814 · cited 1×
“Ultimate analysis is also directly related to the higher heating value of the material [32,33].”
BackgroundMain routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: Pyrolysis systems
Balat, M., Balat, M., Kırtay, E., & Balat, H. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.08.014 · Cited by 738
Pyrolysis characteristics of biomass and biomass components
Raveendran, K. (1996) · Fuel · doi:10.1016/0016-2361(96)00030-0 · Cited by 693 · cited 10×
“[13] reported that cellulose present in different biomass differs due to its varying crystallinity, which not only affects the char yield but also the thermal degradation behavior.”
BackgroundMethodResultInfluentialMurugan, P., Mahinpey, N., Johnson, K. E., & Wilson, M. (2008) · Energy & Fuels · doi:10.1021/ef700730u · Cited by 86
Cited by
Thermogravimetric analysis and kinetic study of poplar wood pyrolysis
Slopiecka, K., Bartocci, P., & Fantozzi, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.056 · Cited by 831
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
“In contrast, Ca was dominant in the bark, which has also been reported for the barks of other trees (Jin et al., 2013).”
BackgroundGordobil, O., Moriana, R., Zhang, L., Labidi, J., & Sevastyanova, O. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.048 · Cited by 258
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Wijitkosum, S., & Jiwnok, P. (2019) · Applied Sciences · doi:10.3390/app9193980 · Cited by 167
Metadata
- Authors
- Jin, W., Singh, K., & Zondlo, J.
- Venue
- Agriculture
- Publisher
- MDPI AG
- Published
- 2013-01-14
- Volume
- 3
- Issue
- 1
- Pages
- 12-32
- ISSN
- 2077-0472 (ISSN-L)
- OpenAlex
- W1984038081
- Cited by
- 130
- References
- 8
- FWCI
- 5.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis Kinetics of Physical Components of Wood and Wood-Polymers Using Isoconversion Method. https://app.cochat.ai/papers/10.3390/agriculture3010012
- The paper
- Jin, W., Singh, K., & Zondlo, J. (2013). Pyrolysis Kinetics of Physical Components of Wood and Wood-Polymers Using Isoconversion Method. Agriculture. https://doi.org/10.3390/agriculture3010012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.