The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 2 of the 11 sources its claims cite were checked for support.
Poka Yoke Meets Deep Learning: A Proof of Concept for an Assembly Line Application
Open accessAbstract
In this paper, we present the re-engineering process of an assembly line... The re-engineering process identified a critical problem in the incorrect assembly of the oil seals... Convolutional neural networks were used to address this issue. The proposed solution resulted to be a Poka Yoke. The whole re-engineering process induced a productivity increase that is estimated from 46% to 80%.
Overview
CoChat Summary
## TL;DR
The paper presents a Lean Manufacturing re-engineering of an assembly line for speed increasers/multipliers and a proof-of-concept CNN-based Poka Yoke for detecting incorrectly mounted oil seals. The re-design is reported to raise line productivity from 46% to 80%, while the CNN achieved 98.8% average micro-accuracy in 5-fold cross-validation.
## Key findings
- The as-is assembly line had a cycle time of 658.8 s/pc, with 47% non-value added operations, 26% semi-value added operations, and 27% value added operations.
- The line re-design reduced the estimated cycle time to 354.2 s/pc; the final balanced assembly setup is reported as 186.4 s/pc per operator phase, and the paper states a saving of 286.0 s/pc and a 1,789 h total saving in the current year.
- For the oil-seal control task, a CNN trained on 500 full-HD images and evaluated with 5-fold cross-validation achieved 98.8% average micro-accuracy, ranging from 97.0% to 99.1%.
- The confusion matrix shows the CNN never classified a wrongly positioned oil seal as correctly positioned; the reported counts are: Correct 146/0/4, Reverse 0/150/0, Absent 2/0/199.
- The productivity of the line is reported to increase from 46% to 80%; the paper also reports 864 h saved in the logistics department and programming office.
- The proposed project’s total expected cost is reported as 27,320 EUR, compared with an average expected crankcase/lid redesign cost of 72,000 EUR.
## Methods
- The paper uses a case-study re-engineering design of an assembly line, starting from an as-is analysis (layout, material flow, spaghetti chart, Muda analysis, and constraints) and designing a to-be process under Lean Manufacturing principles.
- For the Poka Yoke proof of concept, it formulates oil-seal verification as a 3-class image classification task: correct position, upside-down, or absent.
- The model is a CNN with one convolutional layer (32 filters, 3×3), max pooling, a dense layer (64 neurons), dropout (0.5), and a 3-neuron output layer; training used Adam, categorical cross-entropy, mini-batch size 32, early stopping, and 5-fold cross-validation on 500 images.
## Limitations
- The paper itself notes that the paper’s focus is on the production phase, so the reported savings in the logistics area are not considered in the subsequent discussion; this is a scope limitation stated in the text.
- The dataset is small, with only 500 images, and the authors explicitly note that this is a “small amount of images,” which makes the result encouraging but indicates limited evidence.
- Evident from the text: the Poka Yoke is a proof of concept for a specific speed increaser/oil-seal setup, so generalization to other assemblies is suggested but not demonstrated with external validation in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 6 Not valid · 7 Not checked · 100 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“This analysis showed that more than 190 different codes were ordered in the past three years.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In particular, 20,216 units were sold in 2018.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“The whole re-engineering process induced a productivity increase that is estimated from 46% to 80%.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: unclear — It is unclear why the paper says it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The 'as-is' line was highly inefficient due to several issues, including the age of the machines, a non-optimal arrangement of the shop floor, and the absence of process standards.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The assembly line issues were analysed with Lean Manufacturing tools, identifying irregularities and operations that require effort (Mura), overload (Muri), and waste (Muda).”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
52 more claims
Create a free account to see all 115 claims and to verify the 2 references still open.
- Probably not a substantial claim. 42
- It may state two separate claims as one. 28
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Both systems, Poka Yoke and Pick to Light, contribute to improving the quality, accuracy and efficiency of production processes.”
From Poka Yoke in Smart Production Systems with Pick-to-Light Implementation to Increase Efficiency (2023) · cites this paper as [3]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2.4. Dataset
“In order to train the CNN, 500 full HD format images (1920 × 1080 pixels) were collected through the use of a common mid-range smartphone and a tripod.”
§ 3.2. Intelligent Poka Yoke Metrics and Expected Benefits
“| Correct | 146 | 0 | 4 | | Reverse | 0 | 150 | 0 | | Absent | 2 | 0 | 199 |”
Citations
Cites
A Study of the Toyota Production System From an Industrial Engineering Viewpoint
Shingo, S., & Bodek, N. (2019) · doi:10.4324/9781315136509 · Cited by 1,064
Barriers and Accident Prevention
Hollnagel, E. (2016) · Routledge eBooks · doi:10.4324/9781315261737 · Cited by 846
Multi-head CNN–RNN for multi-time series anomaly detection: An industrial case study
Canizo, M., Triguero, I., Conde, A., & Onieva, E. (2019) · Neurocomputing · doi:10.1016/j.neucom.2019.07.034 · Cited by 420
Zhu, Z., Peng, G., Chen, Y., & Gao, H. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.09.050 · Cited by 357
Zhang, Z., Wen, G., & Chen, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.06.023 · Cited by 334
Lean 4.0—A conceptual conjunction of lean management and Industry 4.0
Mayr, A., Weigelt, M., Kühl, A., Grimm, S., Erll, A., Potzel, M., & Franke, J. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.292 · Cited by 333
In-Process monitoring of porosity during laser additive manufacturing process
Zhang, B., Liu, S., & Shin, Y. C. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.030 · Cited by 281
Six sigma: A literature review
Tjahjono, B., Ball, P., Vitanov, V. I., Scorzafave, C., Nogueira, J., Calleja, J., Minguet, M., Narasimha, L., Rivas, A., Srivastava, A., et al. (2010) · International Journal of Lean Six Sigma · doi:10.1108/20401461011075017 · Cited by 268
The evolution and future of lean Six Sigma 4.0
Antony, J., McDermott, O., Powell, D., & Sony, M. (2023) · The TQM Journal · doi:10.1108/tqm-04-2022-0135 · Cited by 124
Romero, D., Gaiardelli, P., Powell, D. J., Wuest, T., & Thürer, M. (2019) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2019.11.309 · Cited by 115
Industry’s 4.0 transformation process: How to start, where to aim, what to be aware of
Calabrese, A., Dora, M., Levialdi Ghiron, N., & Tiburzi, L. (2022) · Production Planning & Control · doi:10.1080/09537287.2020.1830315 · Cited by 109
Mura, M. D., Dini, G., & Failli, F. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.12.128 · Cited by 102
A framework for assessing poka-yoke devices
Saurin, T. A., Ribeiro, J. L. D., & Vidor, G. (2012) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2012.04.001 · Cited by 99
Lean manufacturing and internet of things—A synergetic or antagonist relationship?
Anosike, A., Alafropatis, K., Garza-Reyes, J. A., Kumar, A., Luthra, S., & Rocha-Lona, L. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103464 · Cited by 94
Application of deep visualization in CNN-based tool condition monitoring for end milling
Kothuru, A., Nooka, S. P., & Liu, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.096 · Cited by 75
Küçükoğlu, İ., ULUSU, H. A., GÜNDÜZ, T., & Tokçalar, Ö. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.10.001 · Cited by 58
Deep learning-based visual control assistant for assembly in Industry 4.0
Zamora-Hernández, M.-A., Castro-Vargas, J. A., Azorín-López, J., & García‐Rodríguez, J. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103485 · Cited by 56
Fernando, H., & Surgenor, B. W. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.11.006 · Cited by 42
Artificial-neural-networks-based surface roughness Pokayoke system for end-milling operations
Huang, B. P., Chen, J. C., & Li, Y. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.07.029 · Cited by 40
Żabiński, T., Mączka, T., Kluska, J., Madera, M., & Sęp, J. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.012 · Cited by 39
Process stability analysis and weld formation evaluation during disk laser–mag hybrid welding
Gao, X., Wang, L., Chen, Z., et al. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.105835 · Cited by 34
A Jointed Signal Analysis and Convolutional Neural Network Method for Fault Diagnosis
Wen, L., Gao, L., Li, X., Wang, L., & Zhu, J. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.117 · Cited by 32
Mapping the Terrain for Lean Six Sigma 4.0
Antony, J., McDermott, O., Powell, D. J., & Sony, M. (2021) · IFIP Advances in Information and Communication Technology · doi:10.1007/978-3-030-92934-3_20 · Cited by 21
Zhang, J. Z. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5604-7 · Cited by 20
Development of an Optical Object Detection Solution for Defect Prevention in a Learning Factory
Wiech, M., Böllhoff, J., & Metternich, J. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.037 · Cited by 15
A Case about the Upgrade of Manufacturing Equipment for Insertion into an Industry 4.0 Environment
García-Garza, M. A., Ahuett‐Garza, H., Lopez, M. G., et al. (2019) · Sensors · doi:10.3390/s19153304 · Cited by 15
Recognition of incorrect assembly of internal components by X-ray CT and deep learning
Li, Y., Wu, T., Han, Y., & Chen, P. (2018) · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · doi:10.1016/j.nima.2018.12.031 · Cited by 14
Poka Yoke system based on image analysis and object recognition
Belu, N., Ionescu, L. M., Misztal, A., & Mazăre, A. (2015) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/95/1/012138 · Cited by 13
Lean 4.0 Dynamic Tools for Polymeric Products Manufacturing in Industry 4.0
Dănuţ‐Sorin, I. R., Opran, C. G., & Lamanna, G. (2021) · Macromolecular Symposia · doi:10.1002/masy.202000316 · Cited by 13
Longo, F., Nicoletti, L., Padovano, A., Bruzzone, A., Mirabelli, G., Solis, A. O., Fusto, C., Frangella, J., & Gazzaneo, L. (2019) · The ...European modeling & simulation symposium · doi:10.46354/i3m.2019.emss.054 · Cited by 9
Automated generation of CNC programs for manufacturing of individualized products
Schaede, C., Seifermann, S., & Metternich, J. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.064 · Cited by 8
Design of poka-yoke system based on fuzzy neural network for rotary-machinery monitoring
Muharam, M., & Latif, M. I. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/602/1/012003 · Cited by 6
Implementing Marked-Based Augmented Reality in Discrete industry - A Case Study
Nithyanandam, G. K., Kothandaraman, P. K., Munguía, J., & Marimuthu, M. (2020) · IEEE-HYDCON · doi:10.1109/hydcon48903.2020.9242696 · Cited by 6
Šproch, F., & Nevima, J. (2021) · MM Science Journal · doi:10.17973/mmsj.2021_12_2021115 · Cited by 5
Ho, P., Albajez, J. A., Yagüe, J. A., et al. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1193/1/012105 · Cited by 4
A Study of the Toyota Production System From an Industrial Engineering Viewpoint: Introduction
Shingo, S., & Bodek, N. (2019) · A Study of the Toyota Production System From an Industrial Engineering Viewpoint · doi:10.4324/9781315136509-1
Research works printed but not linked: 2
- Shingo, S. (1986). Zero Quality Control: Source Inspection and the Poka-Yoke System, Productivity Press.
- Goodfellow, I., Bengio, Y., and Courville, A. (2015). Deep Learning, MIT Press.
Cited by
A Sustainable Innovation Framework Based on Lean Six Sigma and Industry 5.0
Rahardjo, B., Wang, F., Lo, S., et al. (2023) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08565-3 · Cited by 38
How Industry 4.0, artificial intelligence and augmented reality can boost Digital Lean Six Sigma
Sordan, J. E., Andersson, R., Antony, J., Pimenta, M. L., & Oprime, P. C. (2024) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2024.2375299 · Cited by 42
Poka Yoke in Smart Production Systems with Pick-to-Light Implementation to Increase Efficiency
Trojanowska, J., Husár, J., Hrehova, S., & Knapčíková, L. (2023) · Applied Sciences · doi:10.3390/app132111715 · Cited by 23
Díaz-Reza, J. R., García-Alcaráz, J. L., Sánchez-Ramírez, C., López, J. A. G., Realyvásquez-Vargas, A., & Rodríguez-Álvarez, J. L. (2025) · Sustainable Futures · doi:10.1016/j.sftr.2025.100551 · Cited by 21
Trojanowska, J., Husár, J., Hrehová, S., & Knapčíková, L. (2023) · Preprints.org · doi:10.20944/preprints202305.1829.v1 · Cited by 7
Metadata
- Authors
- Martinelli, M., Lippi, M., & Gamberini, R.
- Affiliations
- University of Modena and Reggio Emilia (IT)
- Corresponding author
- Martinelli, Matteo
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2022-11-01
- Volume
- 12
- Issue
- 21
- Pages
- 11071
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W4309091299
- Cited by
- 27
- References
- 36
- Citations by year
- 2026: 9 · 2025: 8 · 2024: 4 · 2023: 5 · 2022: 1
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- Research Square (acceptedVersion, cc-by)
- IRIS UNIMORE (University of Modena and Reggio Emilia) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Florence Research (University of Florence) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Manufacturing Process and Optimization
- Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques
- Keywords
- poka-yoke, lean manufacturing, convolutional neural networks, shop floor layout, human factors, smart manufacturing, productivity improvement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.