CoChat

Battery Internal Temperature Measurement Using LC Resonant Tank for Battery Management Systems

Open access

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Abstract

This paper suggests an embedded battery impedance measurement based on an Inductor Capacitor (LC) resonant tank to measure the battery’s internal temperature for battery management systems (BMS). The purpose of the BMS is to provide state-of-charge (SoC) balancing and the preheating mechanism at sub-zero temperatures. Battery Impedance Spectroscopy (BIS) for battery internal temperature measurement is achieved by an LC resonant tank connected to the batteries in parallel to induce created resonant current and voltage into the battery. The peaks of the voltage and current waveforms are measured and recorded. Then, the resistance of the battery can be calculated by comparing the peak voltage and current waveforms. Since the resistance of the battery is affected by the battery’s internal temperature, the internal temperature of the battery can be estimated. The benefit of using the LC tank for the battery’s internal temperature is to reduce data processing since no window and Fast Fourier Transform (FFT) is needed for this method. In addition, the proposed method measures the battery’s internal temperature without any internal or external temperature sensor. Power Simulation (PSIM) simulation software is used in this proposed method. Panasonic batteries 18650 and a dSPACE DS1104 are used for the experiment to verify the proposed method. The proposed method shows that the LC resonant tank can measure three batteries B1, B2, and B3 internal resistance with 17.87%, 18.14%, and 17.73% errors compared to the Frequency Response Analyzer (FRA). In addition, the total time needed for balancing is 400 s, and the total energy consumed by the preheating mechanism is 0.214%/°C to preheat the lithium-ion batteries (LIBs) from −5 °C to 10 °C.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/batteries9020104

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22]. Figure 1. Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22].
Figure 1 Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22]. Figure 1. Embedded EIS into: ( a ) BMS [21]; ( b ) battery charger [22].CC-BY · From the PDF
Figure 2 Proposed configuration for an LC resonant tank for BMS. Figure 2. Proposed configuration for an LC resonant tank for BMS.
Figure 2 Proposed configuration for an LC resonant tank for BMS. Figure 2. Proposed configuration for an LC resonant tank for BMS.CC-BY · From the PDF
Figure 3 ( a ) Series LC resonant with battery; ( b ) current peak at resonant frequency. Figure 3. ( a ) Series LC resonant with battery; ( b ) current peak at resonant frequency.
Figure 3 ( a ) Series LC resonant with battery; ( b ) current peak at resonant frequency. Figure 3. ( a ) Series LC resonant with battery; ( b ) current peak at resonant frequency.CC-BY · From the PDF
Figure 4 Series LC resonant tank frequency selection.
Figure 4 Series LC resonant tank frequency selection.CC-BY · From the PDF
Figure 5 Operating modes for the preheating mechanism and SoC balancing [16]. Figure 5. Operating modes for the preheating mechanism and SoC balancing [16].
Figure 5 Operating modes for the preheating mechanism and SoC balancing [16]. Figure 5. Operating modes for the preheating mechanism and SoC balancing [16].CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Figure 9 The waveform of the preheating mechanism for 1 kHz. Figure 9. The waveform of the preheating mechanism for 1 kHz. Figure 9. The waveform of the preheating mechanism for 1 kHz.
Figure 9 The waveform of the preheating mechanism for 1 kHz. Figure 9. The waveform of the preheating mechanism for 1 kHz. Figure 9. The waveform of the preheating mechanism for 1 kHz.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 11. Batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level.
Batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 11. Batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level.CC-BY · From the PDF
( a ) Resistance vs Temperature at 56Hz (50% SoC)
( a ) Resistance vs Temperature at 56Hz (50% SoC)CC-BY · From the PDF
Figure 12 Cont .
Figure 12 Cont .CC-BY · From the PDF
Figure 12 Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 12. Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 12. Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level.
Figure 12 Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 12. Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level. Figure 12. Curve fitting polynomials and mean batteries' impedance data: ( a ) at 20%; ( b ) at 50%; ( c ) at 99% SoC level.CC-BY · From the PDF
Image 16
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 28 references

Cited by

See all 12

Metadata

Authors
Simatupang, D., Benshatti, A., & Park, S.-Y.
Affiliations
University of Connecticut (US)
Corresponding author
Simatupang, Desmon
Venue
Batteries
Publisher
MDPI AG
Published
2023-02-02
Volume
9
Issue
2
Pages
104
ISSN
2313-0105 (ISSN-L)
OpenAlex
W4319083688
Cited by
12
References
28
Citations by year
2026: 2 · 2025: 4 · 2024: 5 · 2023: 1
FWCI
0.87
Type
journal article
Language
en
Open access
Locations
  • Batteries (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
National Science Foundation (1454578)
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
Keywords
LC resonant tank, battery management systems, battery internal resistance, lithium-ion batteries, battery balancing, battery preheating, sensorless temperature estimation, 18650 cells

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Battery Internal Temperature Measurement Using LC Resonant Tank for Battery Management Systems. https://app.cochat.ai/papers/10.3390/batteries9020104
The paper
Simatupang, D., Benshatti, A., & Park, S.-Y. (2023). Battery Internal Temperature Measurement Using LC Resonant Tank for Battery Management Systems. Batteries. https://doi.org/10.3390/batteries9020104

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.