The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Open accessAbstract
Additive manufacturing (AM) is a new paradigm for the design and production of high-performance components for aerospace, medical, energy, and automotive applications. This review will exclusively cover directed energy deposition (DED)-AM, with a focus on the deposition of powder-feed based metal and alloy systems. This paper provides a comprehensive review on the classification of DED systems, process variables, process physics, modelling efforts, common defects, mechanical properties of DED parts, and quality control methods. To provide a practical framework to print different materials using DED, a process map using the linear heat input and powder feed rate as variables is constructed. Based on the process map, three different areas that are not optimized for DED are identified. These areas correspond to the formation of a lack of fusion, keyholing, and mixed mode porosity in the printed parts. In the final part of the paper, emerging applications of DED from repairing damaged parts to bulk combinatorial alloys design are discussed. This paper concludes with recommendations for future research in order to transform the technology from “form” to “function,” which can provide significant potential benefits to different industries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
Cold spray coating: review of material systems and future perspectives
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., & Dao, M. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000270 · Cited by 754
Self-citationResidual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Physical processes in fusion welding
DebRoy, T., & David, S. A. (1995) · Reviews of Modern Physics · doi:10.1103/revmodphys.67.85 · Cited by 626
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
Integrated Sustainable Life Cycle Design: A Review
Ramani, K., Ramanujan, D., Bernstein, W. Z., Zhao, F., Sutherland, J., Handwerker, C., Choi, J.-K., Kim, H., & Thurston, D. (2010) · Journal of Mechanical Design · doi:10.1115/1.4002308 · Cited by 469
Heigel, J. C., Michaleris, P., & Reutzel, E. W. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.10.003 · Cited by 438
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Laser cladding of aerospace materials
Sexton, L., Lavin, S., Byrne, G., & Kennedy, A. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)01121-9 · Cited by 402
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping
Liu, W., & DuPont, J. N. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00020-4 · Cited by 379
A review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
Manvatkar, V., De, A., & DebRoy, T. (2014) · Journal of Applied Physics · doi:10.1063/1.4896751 · Cited by 362
Adiabatic shear instability is not necessary for adhesion in cold spray
Hassani-Gangaraj, M., Veysset, D., Champagne, V. K., Nelson, K. A., & Schuh, C. A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.07.065 · Cited by 351
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 343
Sensing, modeling and control for laser-based additive manufacturing
Hu, D., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00163-3 · Cited by 329
Understanding thermal behavior in the LENS process
Griffith, M. L., Schlienger, M. E., Harwell, L. D., Oliver, M. S., Baldwin, M. D., Ensz, M. T., Essien, M., Brooks, J., Robino, C. V., Smugeresky, J. E., et al. (1999) · Materials & Design · doi:10.1016/s0261-3069(99)00016-3 · Cited by 327
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
Rafi, H. K., Pal, D., Patil, N., Starr, T. L., & Stucker, B. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-1226-y · Cited by 292
Manvatkar, V., De, A., & DebRoy, T. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000701 · Cited by 282
Sun, Y., & Hao, M. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.01.018 · Cited by 265
Building digital twins of 3D printing machines
DebRoy, T., Zhang, W., Turner, J., & Babu, S. S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.005 · Cited by 259 · cited 2×
“These in turn give important information about the microstructure, defects, texture, and mechanical properties [57].”
BackgroundCunningham, R., Nicolas, A., Madsen, J., Fodran, E., Anagnostou, E., Sangid, M. D., & Rollett, A. D. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1340911 · Cited by 259
Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
Revealing internal flow behaviour in arc welding and additive manufacturing of metals
Aucott, L., Dong, H., Mirihanage, W., Atwood, R., Kidess, A., Gao, S., Wen, S., Marsden, J., Feng, S., Tong, M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07900-9 · Cited by 245
Tian, Y., McAllister, D., Colijn, H., Mills, M., Farson, D., Nordin, M., & Babu, S. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2370-6 · Cited by 241
Mitigation of thermal distortion during additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., & DebRoy, T. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.001 · Cited by 241
Farahmand, P., & Kovacevic, R. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.04.016 · Cited by 239
Bontha, S., Klingbeil, N. W., Kobryn, P. A., & Fraser, H. L. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.03.155 · Cited by 232
Cao, J. H., Gharghouri, M. A., & Nash, P. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.06.032 · Cited by 221
Producing titanium aerospace components from powder using laser forming
Arcella, F. G., & Froes, F. H. (2000) · JOM · doi:10.1007/s11837-000-0028-x · Cited by 202
Hönnige, J. R., Colegrove, P. A., Ahmad, B., Fitzpatrick, M. E., Ganguly, S., Lee, T. L., & Williams, S. W. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.065 · Cited by 200
Dimensionless numbers in additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., & DebRoy, T. (2017) · Journal of Applied Physics · doi:10.1063/1.4976006 · Cited by 196
Modeling of laser cladding with powder injection
Han, L., Phatak, K. M., & Liou, F. W. (2004) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-004-0070-0 · Cited by 192
FEM modeling and experimental verification for dilution control in laser cladding
Hofman, J. T., de Lange, D. F., Pathiraj, B., & Meijer, J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.007 · Cited by 190
Wolff, S. J., Lin, S., Faierson, E. J., Liu, W. K., Wagner, G. J., & Cao, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.027 · Cited by 185
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Koike, M., Martinez, K., Guo, L., Chahine, G., Kovacevic, R., & Okabe, T. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.03.013 · Cited by 182
The Hardness of Additively Manufactured Alloys
Zuback, J. S., & DebRoy, T. (2018) · Materials · doi:10.3390/ma11112070 · Cited by 178
Ke, D., Vu, A. A., Bandyopadhyay, A., & Bose, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.041 · Cited by 177
Kistler, N. A., Corbin, D. J., Nassar, A. R., Reutzel, E. W., & Beese, A. M. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.041 · Cited by 175
Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
Bian, L., Thompson, S. M., & Shamsaei, N. (2015) · JOM · doi:10.1007/s11837-015-1308-9 · Cited by 170
Balla, V. K., DeVasConCellos, P. D., Xue, W., Bose, S., & Bandyopadhyay, A. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.01.011 · Cited by 170
Prediction of melt pool depth and dilution in laser powder deposition
Fathi, A., Toyserkani, E., Khajepour, A., & Durali, M. (2006) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/39/12/022 · Cited by 159
Heat transfer and fluid flow in additive manufacturing
Raghavan, A., Wei, H., Palmer, T. A., & DebRoy, T. (2013) · Journal of Laser Applications · doi:10.2351/1.4817788 · Cited by 159
In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
Wolff, S. J., Wu, H., Parab, N. D., Zhao, C., Ehmann, K. F., Sun, T., & Cao, J. (2019) · Scientific Reports · doi:10.1038/s41598-018-36678-5 · Cited by 157
Research on molten pool temperature in the process of laser rapid forming
Tan, H., Chen, J., Xin, L., Fengying, Z., & Weidong, H. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.06.090 · Cited by 152
Cortina, M., Arrizubieta, J. I., Ruiz, J. E., Ukar, E., & Lamíkiz, A. (2018) · Materials · doi:10.3390/ma11122583 · Cited by 145
Zhai, Y., Galarraga, H., & Lados, D. A. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.007 · Cited by 144
Ansari, M., Razavi, R. S., & Barekat, M. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.06.014 · Cited by 142
Bi, G., & Gasser, A. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.051 · Cited by 139
Application of dimensional analysis to selective laser melting
Elsen, M. V., Al‐Bender, F., & Kruth, J. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810841526 · Cited by 139
Introduction to the design rules for Metal Big Area Additive Manufacturing
Greer, C. M., Nycz, A., Noakes, M., Richardson, B. S., Post, B., Kurfess, T. R., & Love, L. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.016 · Cited by 125
Microstructure and corrosion behavior of laser processed NiTi alloy
Marattukalam, J. J., Singh, A. K., Datta, S., Das, M., Balla, V. K., Bontha, S., & Kalpathy, S. K. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.067 · Cited by 124
Baldridge, T., Poling, G., Foroozmehr, E., Kovacevic, R., Metz, T. E., Kadekar, V., & Gupta, M. C. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.08.006 · Cited by 116
Nassar, A. R., Keist, J. S., Reutzel, E. W., & Spurgeon, T. J. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.03.005 · Cited by 111
Application of Biomaterials in Cardiac Repair and Regeneration
Cui, Z. M., Yang, B., & Li, R. (2016) · Engineering · doi:10.1016/j.eng.2016.01.028 · Cited by 110
Wang, F., Mao, H., Zhang, D., Zhao, X., & Shen, Y. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.039 · Cited by 104
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., & Banerjee, R. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.01.009 · Cited by 101
Laser rapid manufacturing of Colmonoy-6 components
Paul, C. P., Jain, A., Ganesh, P., Negi, J., & Nath, A. K. (2005) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2005.08.005 · Cited by 98
Effect of laser energy density on defects behavior of direct laser depositing 24CrNiMo alloy steel
Cao, L. L., Chen, X., Wei, M., Guo, Q., Liang, J., Liu, C., & Wang, M. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.10.025 · Cited by 87
Investigation of effect of process parameters on multilayer builds by direct metal deposition
Amine, T., Newkirk, J. W., & Liou, F. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.08.005 · Cited by 85
Li, R., Li, Z., Huang, J., & Zhu, Y. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.144 · Cited by 83
Partitioning of laser energy during directed energy deposition
Lia, F., Park, J., Tressler, J. F., & Martukanitz, R. P. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.012 · Cited by 77
Combinatorial Alloy Design by Laser Additive Manufacturing
Knoll, H., Ocylok, S., Weisheit, A., Springer, H., Jägle, E. A., & Raabe, D. (2016) · steel research international · doi:10.1002/srin.201600416 · Cited by 70
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
Prabhu, A. W., Vincent, T., Chaudhary, A., Zhang, W., & Babu, S. S. (2015) · Science and Technology of Welding & Joining · doi:10.1179/1362171815y.0000000050 · Cited by 69
Reactive-deposition-based additive manufacturing of Ti-Zr-BN composites
Traxel, K. D., & Bandyopadhyay, A. K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.005 · Cited by 59
Mechanics and energy analysis on molten pool spreading during laser solid forming
Yu, J., Lin, X., Wang, J., Chen, J., & Huang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.060 · Cited by 56
Yan, S., Wu, D., Niu, F., Huang, Y., Liu, N., & Ma, G. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.10.067 · Cited by 56
Direct laser processing of bulk lead zirconate titanate ceramics
Bernard, S. A., Balla, V. K., Bose, S., et al. (2010) · Materials Science and Engineering B · doi:10.1016/j.mseb.2010.04.022 · Cited by 51
Additive manufacturing by means of laser-aided directed metal deposition of titanium wire
Caiazzo, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1760-0 · Cited by 36
Thermal Modeling and Experimental Validation in the LENS™ Process
Wang, L., Felicelli, S. D., & Craig, J. E. (2007) · doi:10.26153/tsw/7197 · Cited by 24
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Additive Manufacturing: A Comprehensive Review
Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L. D., & Bernat, J. (2024) · Sensors · doi:10.3390/s24092668 · Cited by 599
Metadata
- Authors
- Dass, A., & Moridi, A.
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2019-06-29
- Volume
- 9
- Issue
- 7
- Pages
- 418
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W2954872814
- Cited by
- 667
- References
- 82
- FWCI
- 32.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.