CoChat

Ultra-Long-Term Reliable Encapsulation Using an Atomic Layer Deposited HfO2/Al2O3/HfO2 Triple-Interlayer for Biomedical Implants

Open access
Li, Changzheng, Cauwe, Maarten, Yang, Yang, Schaubroeck, David, Mader, Lothar, Op de Beeck, Maaike · 2019 · Coatings

The DOI matches its Crossref record; 46 of the 51 references it cites were found in a registry or an index.

Abstract

Long-term packaging of miniaturized, flexible implantable medical devices is essential for the next generation of medical devices. Polymer materials that are biocompatible and flexible have attracted extensive interest for the packaging of implantable medical devices, however realizing these devices with long-term hermeticity up to several years remains a great challenge. Here, polyimide (PI) based hermetic encapsulation was greatly improved by atomic layer deposition (ALD) of a nanoscale-thin, biocompatible sandwich stack of HfO2/Al2O3/HfO2 (ALD-3) between two polyimide layers. A thin copper film covered with a PI/ALD-3/PI barrier maintained excellent electrochemical performance over 1028 days (2.8 years) during acceleration tests at 60 °C in phosphate buffered saline solution (PBS). This stability is equivalent to approximately 14 years at 37 °C. The coatings were monitored in situ through electrochemical impedance spectroscopy (EIS), were inspected by microscope, and were further analyzed using equivalent circuit modeling. The failure mode of ALD Al2O3, ALD-3, and PI soaking in PBS is discussed. Encapsulation using ultrathin ALD-3 combined with PI for the packaging of implantable medical devices is robust at the acceleration temperature condition for more than 2.8 years, showing that it has great potential as reliable packaging for long-term implantable devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/coatings9090579

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic illustration of the four tested barriers-Al2O3 ( a ), ALD-3 ( b ), PI ( c ) and PI/ALD3/PI ( d ), and the cross-section of PI/ALD-3/PI obtained by FIB-SEM ( e ).
Figure 1 Schematic illustration of the four tested barriers-Al2O3 ( a ), ALD-3 ( b ), PI ( c ) and PI/ALD3/PI ( d ), and the cross-section of PI/ALD-3/PI obtained by FIB-SEM ( e ).CC-BY · From the PDF
Figure 2 Schematic diagram of the electrochemical impedance spectroscopy (EIS) test setup. WE: working electrode, RE: reference electrode (Ag/AgCl), CE: counter electrode (Pt mesh).
Figure 2 Schematic diagram of the electrochemical impedance spectroscopy (EIS) test setup. WE: working electrode, RE: reference electrode (Ag/AgCl), CE: counter electrode (Pt mesh).CC-BY · From the PDF
Figure 3 Impedance spectra and phase angle in the frequency domain (Bode plots) of the four tested barriers: Al2O3 ( a ), ALD-3 ( b ), PI ( c ), and PI/ALD-3/PI ( d ). ( e ) Evolution of the impedance and ( f ) phase angle at 1 Hz of the barriers over a period of 1000 days. 'D x ' means the day of the measurement done in the plots after x days.
Figure 3 Impedance spectra and phase angle in the frequency domain (Bode plots) of the four tested barriers: Al2O3 ( a ), ALD-3 ( b ), PI ( c ), and PI/ALD-3/PI ( d ). ( e ) Evolution of the impedance and ( f ) phase angle at 1 Hz of the barriers over a period of 1000 days. 'D x ' means the day of the measurement done in the plots after x days.CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Figure 5 Density of the corrosion holes in the atomic layer deposition (ALD) barrier-protected copper changes with soaking time in PBS solution.
Figure 5 Density of the corrosion holes in the atomic layer deposition (ALD) barrier-protected copper changes with soaking time in PBS solution.CC-BY · From the PDF
Figure 6 SEM images of the corrosion holes in barriers protected copper: ( a ) Al2O3; ( b ) ALD-3, ( c ) PI, and ( d ) PI/ALD-3/PI.
Figure 6 SEM images of the corrosion holes in barriers protected copper: ( a ) Al2O3; ( b ) ALD-3, ( c ) PI, and ( d ) PI/ALD-3/PI.CC-BY · From the PDF
Figure 7 Fitting results of the equivalent circuit model parameters of the barriers: ( a ) An equivalent circuit model was used to analyze the EIS results. Changes of capacitance and pore resistance R pore of the barriers exposed to PBS; ( b ) Al2O3, ( c ) ALD-3 and ( d ) PI/ALD-3/PI.
Figure 7 Fitting results of the equivalent circuit model parameters of the barriers: ( a ) An equivalent circuit model was used to analyze the EIS results. Changes of capacitance and pore resistance R pore of the barriers exposed to PBS; ( b ) Al2O3, ( c ) ALD-3 and ( d ) PI/ALD-3/PI.CC-BY · From the PDF
Figure 8 Equivalent circuit (EC) and fitting parameters for the PI barrier: ( a ) EC for the degradation process of stage 1, ( b ) of stage 2, and ( c ) of stage 3. ( d ) Capacitance and pore resistance R pore of the barrier changes during exposure to PBS. ( e ) Changes of the double layer capacitance and charge transfer resistance R ct changes during the soaking.
Figure 8 Equivalent circuit (EC) and fitting parameters for the PI barrier: ( a ) EC for the degradation process of stage 1, ( b ) of stage 2, and ( c ) of stage 3. ( d ) Capacitance and pore resistance R pore of the barrier changes during exposure to PBS. ( e ) Changes of the double layer capacitance and charge transfer resistance R ct changes during the soaking.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 46 references

Research works printed but not linked: 4

  1. Jiang, G., and Zhou, D.D. (2010). Implantable Neural Prostheses 2, Springer.
  2. Loveday, 2004, Evaluation of organic coatings with electrochemical impedance spectroscopy part 2: Application of EIS to coatings, JCT Coat. Tech., 1, 88
  3. Loveday, 2005, Evaluation of organic coatings with electrochemical impedance spectroscopy, part 3: Protocols for testing coatings with EIS, JCT Coat. Tech., 2, 22
  4. (2019, September 11). HD MicroSystems “PI-2600 Series—Low Stress Applications” Product Bulletin. Available online: https://www.dupont.com/content/dam/dupont/products-and-services/electronic-and-electrical-materials/semiconductor-fabrication-and-packaging-materials/documents/PI-2600_ProcessGuide.pdf.

Cited by

See all 46

Metadata

Authors
Li, C., Cauwe, M., Yang, Y., Schaubroeck, D., Mader, L., & Op de Beeck, M.
Affiliations
  • Ghent University (BE)
  • Pacific Northwest National Laboratory (US)
  • Centre for Microsystems Technology (CMST), imec and Ghent University, Technologiepark 126, 9052 Gent, Belgium
Corresponding author
Cauwe, Maarten
Venue
Coatings
Publisher
MDPI AG
Published
2019-09-12
Volume
9
Issue
9
Pages
579
ISSN
2079-6412 (ISSN-L)
OpenAlex
W2972568184
Cited by
46
References
51
Citations by year
2026: 5 · 2025: 14 · 2024: 5 · 2023: 4 · 2022: 7 · 2021: 5 · 2020: 5 · 2019: 1
FWCI
1.62
Type
journal article
Language
en
Open access
Locations
  • Coatings (publishedVersion, cc-by)
  • Ghent University Academic Bibliography (Ghent University) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
China Scholarship Council (201406150084)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
  • Life Sciences › Neuroscience › Cellular and Molecular Neuroscience › Neuroscience and Neural Engineering
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Copper Interconnects and Reliability
Keywords
hermetic encapsulation, biomedical implants, atomic layer deposition, polyimide, long-term reliability, biocompatible packaging, electrochemical stability, phosphate buffered saline, failure mode analysis, equivalent circuit model

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Ultra-Long-Term Reliable Encapsulation Using an Atomic Layer Deposited HfO2/Al2O3/HfO2 Triple-Interlayer for Biomedical Implants. https://app.cochat.ai/papers/10.3390/coatings9090579
The paper
Li, C., Cauwe, M., Yang, Y., Schaubroeck, D., Mader, L., & Op de Beeck, M. (2019). Ultra-Long-Term Reliable Encapsulation Using an Atomic Layer Deposited HfO2/Al2O3/HfO2 Triple-Interlayer for Biomedical Implants. Coatings. https://doi.org/10.3390/coatings9090579

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.