Towards Biochar and Hydrochar Engineering—Influence of Process Conditions on Surface Physical and Chemical Properties, Thermal Stability, Nutrient Availability, Toxicity and Wettability
Open accessThe DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
The impact of conversion process parameters in pyrolysis (maximum temperature, inert gas flow rate) and hydrothermal carbonization (maximum temperature, residence time and post-washing) on biochar and hydrochar properties is investigated. Pine wood (PW) and corn digestate (CD), with low and high inorganic species content respectively, are used as feedstock. CD biochars show lower H/C ratios, thermal recalcitrance and total specific surface area than PW biochars, but higher mesoporosity. CD and PW biochars present higher naphthalene and phenanthrene contents, respectively, which may indicate different reaction pathways. High temperatures (>500 °C) lead to lower PAH (polycyclic aromatic hydrocarbons) content (<12 mg/kg) and higher specific surface area. With increasing process severity the biochars carbon content is also enhanced, as well as the thermal stability. High inert gas flow rates increase the microporosity and wettability of biochars. In hydrochars the high inorganic content favor decarboxylation over dehydration reactions. Hydrochars show mainly mesoporosity, with a higher pore volume but generally lower specific surface area than biochars. Biochars present negligible availability of NO 3 − and NH 4 + , irrespective of the nitrogen content of the feedstock. For hydrochars, a potential increase in availability of NO 3 − , NH 4 + , PO 4 3 − , and K + with respect to the feedstock is possible. The results from this work can be applied to “engineer” appropriate biochars with respect to soil demands and certification requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures









Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Reaction conditions can affect significantly the yield and characteristics of hydrochar and biochar [20,21].”
From Hydrochar: A Review on Its Production Technologies and Applications (2021) · cites this paper as [21]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 2×
“The decrease of H/C molar ratio is indicative of the formation of structures containing unsaturated carbon such as aromatic rings [59], and therefore, represents the increase in aromaticity with charring degree, as reported in [25].”
BackgroundResultMohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
A review of biochar and its use and function in soil
Sohi, S. P., Krull, E., Lopez-Capel, E., & Bol, R. (2010) · Advances in Agronomy · doi:10.1016/s0065-2113(10)05002-9 · Cited by 2,240 · cited 2×
“Consequently, in order to achieve the capacity of “engineering biochar”, not only further knowledge of the mechanisms behind biochar interactions in soil (including quantification and durability of the impact and variability in response) [9,31] is required, but also a deeper mechanistic understanding of the influence…”
BackgroundThe forms of alkalis in the biochar produced from crop residues at different temperatures
Yuan, J.-H., Xu, R.-K., & Zhang, H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.11.018 · Cited by 2,029
Van Zwieten, L., Kimber, S., Morris, S., Chan, K. Y., Downie, A., Rust, J., Joseph, S., & Cowie, A. (2010) · Plant and Soil · doi:10.1007/s11104-009-0050-x · Cited by 1,916 · cited 1×
“• Biochars pH is of high relevance for its application in soil, since it determines not only its potential liming effect, but it also has an influence on other properties, such as CEC, water holding capacity or adsorption capacity for different nutrients or heavy metals [18,30].”
BackgroundDevelopment of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754 · cited 1×
“The potential formation of oxides or other metal composites on the biochar surface, associated to the high content of inorganic matter, could also play a role [55].”
BackgroundThe Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623 · cited 1×
“However, other process variables such as inert gas flow rate, heating rate, particle size, atmosphere and pressure can dramatically change biochar properties as well [26,32,33].”
BackgroundA review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Research works printed but not linked: 1
- Chan, K.Y., and Xu, Z. (2009). Nutrient Properties and Their Enhancement. Biochar for Environmental Management. Science and Technology, Earthscan. Chapter 5.
Cited by
Ippolito, J. A., Cui, L., Kammann, C., Wrage-Mönnig, N., Estavillo, J. M., Fuertes-Mendizabal, T., Cayuela, M. L., Sigua, G., Novak, J., Spokas, K., et al. (2020) · Biochar · doi:10.1007/s42773-020-00067-x · Cited by 927
Janu, R., Mrlik, V., Ribitsch, D., Hofman, J., Sedláček, P., Bielská, L., & Soja, G. (2021) · Carbon Resources Conversion · doi:10.1016/j.crcon.2021.01.003 · Cited by 453
Zhang, B., Biswal, B. K., Zhang, J., & Balasubramanian, R. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00673 · Cited by 432
Hydrochar: A Review on Its Production Technologies and Applications
Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K. (2021) · Catalysts · doi:10.3390/catal11080939 · Cited by 363
Hydochar and biochar: Production, physicochemical properties and techno-economic analysis
Kumar, A., Saini, K., & Bhaskar, T. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123442 · Cited by 279
Metadata
- Authors
- Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A., Ojeda, G., Bachmann, J., & Behrendt, F.
- Affiliations
- Technische Universität Berlin (DE)
- Karlsruhe Institute of Technology (DE)
- Institute of Thermal Engineering, Graz University of Technology, Inffeldgasse 25b, 8010 Graz, Austria
- University of Bologna (IT)
- Centre for Research on Ecology and Forestry Applications (ES)
- Leibniz University Hannover (DE)
- Corresponding author
- Dieguez-Alonso, Alba
- ORCID
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2018-02-27
- Volume
- 11
- Issue
- 3
- Pages
- 496
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2789957287
- Cited by
- 141
- References
- 70
- Citations by year
- 2026: 14 · 2025: 23 · 2024: 15 · 2023: 19 · 2022: 17 · 2021: 16 · 2020: 22 · 2019: 10 · 2018: 4
- FWCI
- 5.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- Repository KITopen (Karlsruhe Institute of Technology) (submittedVersion, cc-by)
- Dipòsit Digital de Documents de la UAB (Universitat Autònoma de Barcelona) (submittedVersion, cc-by)
- Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) (submittedVersion, cc-by-nc-nd)
- RePEc: Research Papers in Economics (submittedVersion)
- Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Leibniz Universität Hannover (cc-by)
- KITopen (cc-by)
- Funders
- Deutsche Forschungsgemeinschaft
- Technische Universität Berlin
- Leibniz-Gemeinschaft
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Life Sciences › Agricultural and Biological Sciences › Soil Science › Soil Carbon and Nitrogen Dynamics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Keywords
- biochar, hydrochar, pyrolysis, hydrothermal carbonization, pine forest, processing conditions, thermal stability, specific surface area, porosity, polycyclic aromatic hydrocarbons, wettability, nutrient availability, nitrogen availability, inorganic content, decarboxylation, soil amendment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards Biochar and Hydrochar Engineering—Influence of Process Conditions on Surface Physical and Chemical Properties, Thermal Stability, Nutrient Availability, Toxicity and Wettability. https://app.cochat.ai/papers/10.3390/en11030496
- The paper
- Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A., Ojeda, G., Bachmann, J., & Behrendt, F. (2018). Towards Biochar and Hydrochar Engineering—Influence of Process Conditions on Surface Physical and Chemical Properties, Thermal Stability, Nutrient Availability, Toxicity and Wettability. Energies. https://doi.org/10.3390/en11030496
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.