Model Predictive Control (MPC) for Enhancing Building and HVAC System Energy Efficiency: Problem Formulation, Applications and Opportunities
Open accessThe DOI matches its Crossref record; 177 of the 178 references it cites were found in a registry or an index.
Abstract
In the last few years, the application of Model Predictive Control (MPC) for energy management in buildings has received significant attention from the research community. MPC is becoming more and more viable because of the increase in computational power of building automation systems and the availability of a significant amount of monitored building data. MPC has found successful implementation in building thermal regulation, fully exploiting the potential of building thermal mass. Moreover, MPC has been positively applied to active energy storage systems, as well as to the optimal management of on-site renewable energy sources. MPC also opens up several opportunities for enhancing energy efficiency in the operation of Heating Ventilation and Air Conditioning (HVAC) systems because of its ability to consider constraints, prediction of disturbances and multiple conflicting objectives, such as indoor thermal comfort and building energy demand. Despite the application of MPC algorithms in building control has been thoroughly investigated in various works, a unified framework that fully describes and formulates the implementation is still lacking. Firstly, this work introduces a common dictionary and taxonomy that gives a common ground to all the engineering disciplines involved in building design and control. Secondly the main scope of this paper is to define the MPC formulation framework and critically discuss the outcomes of different existing MPC algorithms for building and HVAC system management. The potential benefits of the application of MPC in improving energy efficiency in buildings were highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Numerous MPC studies have reported the potential to maintain the optimum/comfort range temperature while reducing energy consumption by 10-30% [7,14,15].”
From Energy-Saving Control Method for Factory Mushroom Room Air Conditioning Based on MPC (2023) · cites this paper as [15]
Citations
Cites
Control of systems integrating logic, dynamics, and constraints
Bemporad, A., & Morari, M. (1999) · Automatica · doi:10.1016/s0005-1098(98)00178-2 · Cited by 3,066 · cited 1×
“In this case, the optimization most commonly can be cast as a Mixed Integer Programming (MIP) problem, and the MPC formulation is commonly referred as hybrid MPC [54].”
Self-citationA review on the prediction of building energy consumption
Zhao, H.-X., & Magoulès, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.049 · Cited by 1,937 · cited 1×
“• Online predictions rely on the availability of an internet connection and the possibility to acquire forecasts from a third party modeling source, that can provide accurate prediction using complex models [50,57,60] (e.”
Camacho, E. F., & Bordons, C. (2007) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-0-85729-398-5 · Cited by 1,391
Theory and applications of HVAC control systems – A review of model predictive control (MPC)
Afram, A., & Janabi-Sharifi, F. (2014) · Building and Environment · doi:10.1016/j.buildenv.2013.11.016 · Cited by 1,310 · cited 3×
“To the best of authors’ knowledge, the work of Afram and Janabi-Sharifi [21] can be considered the most remarkable review on MPC due to the worthy scheme of MPC implementation that it offers, combined with clear classifications criteria.”
InfluentialUse of model predictive control and weather forecasts for energy efficient building climate control
Oldewurtel, F., Parisio, A., Jones, C. N., Gyalistras, D., Gwerder, M., Stauch, V., Lehmann, B., & Morari, M. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.09.022 · Cited by 1,222
Robust model predictive control: A survey
Bemporad, A., & Morari, M. (2007) · Lecture Notes in Control and Information Sciences · doi:10.1007/bfb0109870 · Cited by 1,066 · cited 1×
“An MPC is called robust MPC when the stability and the performance specifications are maintained for all possible model variations and a class of noise signals (uncertainty magnitude) within a specified range [48].”
Self-citationShaikh, P. H., Nor, N. B. M., Nallagownden, P., Elamvazuthi, I., & Ibrahim, T. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.027 · Cited by 866 · cited 2×
“Considering that usually indoor thermal comfort and building energy demand are contrasting needs, optimization procedures that aim at finding a trade-off between them are one of the primary goals of engineers and researchers worldwide [3].”
Dounis, A. I., & Caraiscos, C. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.09.015 · Cited by 851 · cited 2×
“The papers [10,39] are two preliminary surveys dealing with advanced control systems for energy and comfort management in buildings.”
State of the art in building modelling and energy performances prediction: A review
Foucquier, A., Robert, S., Suard, F., Stéphan, L., & Jay, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.004 · Cited by 832 · cited 1×
“The simplest method for offline predictions is based on a rule of thumb that states that “the conditions of the next hours would be only slightly different from those of the previous time period” [51,95,96].”
Experimental analysis of model predictive control for an energy efficient building heating system
Široký, J., Oldewurtel, F., Cigler, J., & Prívara, S. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.03.009 · Cited by 753 · cited 1×
“, boiler or heat pump response rate [112], valve/damper/pump/fan change rate [114]).”
Identifying suitable models for the heat dynamics of buildings
Bacher, P., & Madsen, H. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.005 · Cited by 700 · cited 2×
“A forward selection strategy is used to find the best model by an iterative process, using the most meaningful and adequately complex model [84,87].”
Afram, A., Janabi-Sharifi, F., Fung, A. S., & Raahemifar, K. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.02.012 · Cited by 655 · cited 2×
“Papers [20,44] are the most recent reviews on MPC applied to building and HVAC system control.”
Review of building energy modeling for control and operation
Li, X., & Wen, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.05.056 · Cited by 629 · cited 2×
“To correctly apply an MPC strategy it is necessary to generate a virtual image of the controlled system, called control-oriented building model, capable of describing the physics of such controlled process accurately [65].”
Demand side management in smart grid: A review and proposals for future direction
Gelazanskas, L., & Gamage, K. A. A. (2014) · Sustainable Cities and Society · doi:10.1016/j.scs.2013.11.001 · Cited by 625 · cited 1×
“The implementation of active demand initiatives and peak-shaving strategies are expected to increase in the next future to help the integration of these distributed resources and generation systems in smart distribution grids [5,6].”
Model Predictive Control for the Operation of Building Cooling Systems
Ma, Y., Borrelli, F., Hencey, B., Coffey, B., Bengea, S., & Haves, P. (2012) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2124461 · Cited by 527
Towards sustainable, energy-efficient and healthy ventilation strategies in buildings: A review
Chenari, B., Dias Carrilho, J., & Gameiro da Silva, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.074 · Cited by 515 · cited 1×
“, ventilation systems [35], ground-coupled heat pumps [36], thermal storages [37], window control [38], etc.”
Supervisory and Optimal Control of Building HVAC Systems: A Review
Wang, S., & Ma, Z. (2008) · HVAC&R Research · doi:10.1080/10789669.2008.10390991 · Cited by 496 · cited 2×
“In detail, in [39] a useful framework of the early studies about the model-based supervisory control methods up to 2006 is provided.”
Model predictive control of a building heating system: The first experience
Prívara, S., Široký, J., Ferkl, L., & Cigler, J. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.022 · Cited by 473 · cited 1×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Ten Questions Concerning Model Predictive Control for Energy Efficient Buildings
Killian, M., & Kozek, M. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.034 · Cited by 463 · cited 2×
“Killian and Kozek [45] compared this situation for MPC in building control systems to the one in the early 90’s of MPC in the process industry.”
Building Performance Simulation for Design and Operation
Hensen, J. L. M. (2012) · Routledge eBooks · doi:10.4324/9780203891612 · Cited by 454
Neural networks based predictive control for thermal comfort and energy savings in public buildings
Ferreira, P. M., Ruano, A. E., Silva, S., & Conceição, E. Z. E. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.08.002 · Cited by 445 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Oldewurtel, F., Parisio, A., Jones, C. N., Morari, M., Gyalistras, D., Gwerder, M., Stauch, V, Lehmann, B., & Wirth, K. (2010) · Proceedings of the 2010 American Control Conference · doi:10.1109/acc.2010.5530680 · Cited by 435 · cited 3×
“A stochastic approach in MPC is often used to simulate the occupancy disturbances [50,51].”
Genetic-Algorithm-Based Optimization Approach for Energy Management
Arabali, A., Ghofrani, M., Etezadi-Amoli, M., Fadali, M. S., & Baghzouz, Y. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2219598 · Cited by 388 · cited 1×
“Moreover, Gas were exploited for the broader scope of optimizing the coordination of energy demand, renewable energy generation and energy storage [34].”
Sturzenegger, D., Gyalistras, D., Morari, M., & Smith, R. S. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2415411 · Cited by 387
Demand reduction in building energy systems based on economic model predictive control
Ma, J., Qin, J., Salsbury, T., & Xu, P. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2011.07.052 · Cited by 373
Building temperature regulation using a distributed model predictive control
Moroşan, P.-D., Bourdais, R., Dumur, D., & Buisson, J. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.014 · Cited by 365 · cited 2×
“An excellent comparison between the performance of centralized, decentralized and distributed in building energy management MPC configurations is presented in [92,104,106].”
Building modeling as a crucial part for building predictive control
Prívara, S., Cigler, J., Váňa, Z., Oldewurtel, F., Sagerschnig, C., & Žáčeková, E. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.10.024 · Cited by 348 · cited 3×
“This c ntrol-oriented building model must be accurate enou h to ensure satisfactory pr diction cap bilities and capture the fu ame tal engin ering processes that influence the dynamics of the controlled buil ing, but at the same time has to be simple to e sure a r asonable computational tim of the ptimizatio process […”
InfluentialQuantitative energy performance assessment methods for existing buildings
Wang, S., Yan, C., & Xiao, F. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.08.037 · Cited by 324
Aswani, A., Master, N., Taneja, J., Culler, D., & Tomlin, C. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2161242 · Cited by 289
Economic Model Predictive Control for building climate control in a Smart Grid
Halvgaard, R., Poulsen, N. K., Madsen, H., & Jorgensen, J. B. (2012) · 2012 IEEE PES Innovative Smart Grid Technologies (ISGT) · doi:10.1109/isgt.2012.6175631 · Cited by 289 · cited 3×
“, minimum or maximum power of a heat pump [112] or a terminal unit [104], valve/damper position limits [113]) and for the rate of change of their operation (e.”
MPC-Based Appliance Scheduling for Residential Building Energy Management Controller
Chen, C., Wang, J., Heo, Y., & Kishore, S. (2013) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2013.2265239 · Cited by 287
Data science for building energy management: A review
Molina-Solana, M., Ros, M., Ruiz, M. D., Gómez-Romero, J., & Martin-Bautista, M. J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.132 · Cited by 287 · cited 1×
“For this reason, if the information gathered is properly processed through data-driven procedures, it may provide crucial knowledge on the actual building performance and the influence of occupant behavior on the building energy demand [8,9].”
Esther, B. P., & Kumar, K. S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.282 · Cited by 264 · cited 1×
“In [40,41] Demand Side Management (DSM) procedures are reviewed with the aim to clarify the possible energy management strategies based on load forecasts and predictions.”
Handling model uncertainty in model predictive control for energy efficient buildings
Maasoumy, M., Razmara, M., Shahbakhti, M., & Vincentelli, A. S. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.03.057 · Cited by 254
A Survey on Industry Impact and Challenges Thereof [Technical Activities]
Samad, T. (2017) · IEEE Control Systems · doi:10.1109/mcs.2016.2621438 · Cited by 240
Oldewurtel, F., Ulbig, A., Parisio, A., Andersson, G., & Morari, M. (2010) · 49th IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2010.5717458 · Cited by 237
Ascione, F., Bianco, N., De Stasio, C., Mauro, G. M., & Vanoli, G. P. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.033 · Cited by 235 · cited 2×
“It is ai l se e t e c tr l als f c s the peak values [108,139–145], such as reducing or s ifting the power peak load or minimizing the maximum daily PPD value [75].”
Model predictive HVAC load control in buildings using real-time electricity pricing
Avci, M., Erkoc, M., Rahmani, A., & Asfour, S. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.01.008 · Cited by 232
Occupancy-based zone-climate control for energy-efficient buildings: Complexity vs. performance
Goyal, S., Ingley, H. A., & Barooah, P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.039 · Cited by 225
Occupancy behavior based model predictive control for building indoor climate—A critical review
Mirakhorli, A., & Dong, B. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.07.036 · Cited by 225 · cited 2×
“The second one [20] is focused on occupant behavior based MPC problems for internal temperature regulation.”
De Coninck, R., & Helsen, L. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.014 · Cited by 220 · cited 2×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Li, Z., Han, Y., & Xu, P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.020 · Cited by 209 · cited 1×
“, EnergyPlus, TRNSYS, ESP-r and DOE-2) belong to the forward approach methods [56].”
Lu, Y., Wang, S., Sun, Y., & Yan, C. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.02.060 · Cited by 198 · cited 2×
“Since in these studies different long-term comfort indicators were used [147], a detailed comparison of the results was not achievable.”
Using genetic algorithms to optimize controller parameters for HVAC systems
Huang, W., & Lam, H. N. (1997) · Energy and Buildings · doi:10.1016/s0378-7788(97)00008-x · Cited by 196 · cited 1×
“The use of GAs has been extensively researched for tuning parameters of classical controllers [30] and FLCs [31].”
Henze, G. P., Kalz, D. E., Liu, S., & Felsmann, C. (2005) · HVAC&R Research · doi:10.1080/10789669.2005.10391134 · Cited by 196 · cited 1×
“This fact can be achieved either by including a constant or linear representation of the Coefficient of Performance (COP) of the studied unit in the control-oriented model or in the linear cost function [68,90,100].”
Model Predictive Control of thermal energy storage in building cooling systems
Ma, Y., Borrelli, F., Hencey, B., Packard, A., & Bortoff, S. (2009) · Proceedings of the 48h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference · doi:10.1109/cdc.2009.5400677 · Cited by 196 · cited 2×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
A personalized measure of thermal comfort for building controls
Daum, D., Haldi, F., & Morel, N. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.06.011 · Cited by 189 · cited 1×
“Some authors use a comparison between PMV and Actual Mean Vote (AMV) to merge information from occupants’ feedback and data from sensors [130,132] to improve the decision of their thermal comfort.”
Building Automation and Control Systems and performance optimization: A framework for analysis
Aste, N., Manfren, M., & Marenzi, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.072 · Cited by 184 · cited 2×
“Many investigations proved that more advanced control methods could ensure significant energy saving when compared to traditional control methods [7].”
A distributed predictive control approach to building temperature regulation
Ma, Y., Anderson, G., & Borrelli, F. (2011) · Proceedings of the 2011 American Control Conference · doi:10.1109/acc.2011.5991549 · Cited by 182 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Huang, H., Chen, L., & Hu, E. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.01.037 · Cited by 181 · cited 1×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Modelling the heat dynamics of a building using stochastic differential equations
Andersen, K. K., Madsen, H., & Hansen, L. H. (2000) · Energy and Buildings · doi:10.1016/s0378-7788(98)00069-3 · Cited by 180 · cited 1×
“There are three main categories of measured disturbances affecting an MPC problem for HVAC system and building energy management:”
A model predictive control optimization environment for real-time commercial building application
Corbin, C. D., Henze, G. P., & May-Ostendorp, P. (2013) · Journal of Building Performance Simulation · doi:10.1080/19401493.2011.648343 · Cited by 171
Model-predictive control of mixed-mode buildings with rule extraction
May-Ostendorp, P., Henze, G. P., Corbin, C. D., Rajagopalan, B., & Felsmann, C. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.08.004 · Cited by 171 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Verhelst, C., Logist, F., Van Impe, J., & Helsen, L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.10.015 · Cited by 169
Fiorentini, M., Cooper, P., & Ma, Z. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.018 · Cited by 169 · cited 1×
“HVAC systems integrating RES thermal generation and energy storage can also exhibit a hybrid nature since they can operate in various defined operating modes [66,68].”
Self-citationStabilizing Model Predictive Control of Stochastic Constrained Linear Systems
Bernardini, D., & Bemporad, A. (2011) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2011.2176429 · Cited by 165 · cited 1×
“Contrariwise, in case of discrete distributions, that is if the uncertainty can only take value from a limited set with a given probability, one can optimize stochastic measures (such as a trade-off of expectation and variance, or conditional value at risk) and enforce constraints either for all disturbances (worst-ca…”
Self-citationTen questions concerning integrating smart buildings into the smart grid
Lawrence, T. M., Boudreau, M., Helsen, L., Henze, G. P., Mohammadpour, J., Noonan, D. S., Patteeuw, D., Pless, S., & Watson, R. T. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.08.022 · Cited by 162 · cited 1×
“The implementation of active demand initiatives and peak-shaving strategies are expected to increase in the next future to help the integration of these distributed resources and generation systems in smart distribution grids [5,6].”
MPC-based optimal scheduling of grid-connected low energy buildings with thermal energy storages
Zhao, Y., Lu, Y., Yan, C., & Wang, S. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2014.10.019 · Cited by 161
Optimisation of energy management in commercial buildings with weather forecasting inputs: A review
Lazos, D., Sproul, A. B., & Kay, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.053 · Cited by 159 · cited 2×
“In [41] MPC is considered as the most diffused and effective instrument in an energy management optimization framework, which represents the higher level of intelligent control of a building for the authors.”
Integrating scheduling and control for economic MPC of buildings with energy storage
Touretzky, C. R., & Bâldea, M. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2014.04.015 · Cited by 152
Application of economic MPC to the energy and demand minimization of a commercial building
Ma, J., Qin, S. J., & Salsbury, T. I. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2014.06.011 · Cited by 144 · cited 1×
“, temperature desired values for optimal energy demand) by the upper supervisory optimization layer [52].”
Implementation of model predictive control for an HVAC system in a mid-size commercial building
Bengea, S. C., Kelman, A. D., Borrelli, F., Taylor, R., & Narayanan, S. (2014) · Science and Technology for the Built Environment · doi:10.1080/10789669.2013.834781 · Cited by 141 · cited 1×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Temperature Control of a Commercial Building With Model Predictive Control Techniques
Mantovani, G., & Ferrarini, L. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2387095 · Cited by 141
Fiorentini, M., Wall, J., Ma, Z., Braslavsky, J. H., & Cooper, P. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.041 · Cited by 134 · cited 2×
“HVAC systems integrating RES thermal generation and energy storage can also exhibit a hybrid nature since they can operate in various defined operating modes [66,68].”
Self-citationExperimental study of occupancy-based control of HVAC zones
Goyal, S., Barooah, P., & Middelkoop, T. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.11.064 · Cited by 133
Bilinear Model Predictive Control of a HVAC System Using Sequential Quadratic Programming
Kelman, A. D., & Borrelli, F. (2011) · IFAC Proceedings Volumes · doi:10.3182/20110828-6-it-1002.03811 · Cited by 131 · cited 1×
“There are three main categories of measured disturbances affecting an MPC problem for HVAC system and building energy management:”
Optimal exergy control of building HVAC system
Razmara, M., Maasoumy, M., Shahbakhti, M., & Robinett, R. D. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.07.051 · Cited by 128
Model predictive control for indoor thermal comfort and energy optimization using occupant feedback
Chen, X., Wang, Q., & Srebric, J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.002 · Cited by 126 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Maasoumy, M., & Sangiovanni-Vincentelli, A. L. (2012) · IEEE Design & Test of Computers · doi:10.1109/mdt.2012.2200871 · Cited by 126
Fuzzy Control of HVAC Systems Optimized by Genetic Algorithms
Alcalá, R., Benítez, J. M., Casillas, J., Cordón, Ó., & Pérez, R. (2003) · Applied Intelligence · doi:10.1023/a:1021986309149 · Cited by 123
Economic model predictive control for building energy systems
Ma, J., Qin, S. J., Li, B., & Salsbury, T. I. (2011) · IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT) · doi:10.1109/isgt.2011.5759140 · Cited by 123 · cited 2×
“However, those processes can be treated as a Linear Time-Invariant (LTI) system, under proper assumptions and simplifications in the control-oriented model (e.g., RC networks with fixed material features and linearized radiative heat transfer coefficient).”
Atam, E., & Helsen, L. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.007 · Cited by 122 · cited 1×
“, ventilation systems [35], ground-coupled heat pumps [36], thermal storages [37], window control [38], etc.”
Li, S., Joe, J., Hu, J., & Karava, P. (2015) · Solar Energy · doi:10.1016/j.solener.2014.11.024 · Cited by 121
Optimizing building comfort temperature regulation via model predictive control
Álvarez, J. D., Redondo, J. L., Camponogara, E., Normey-Rico, J. E., Berenguel, M., & Ortigosa, P. M. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.10.044 · Cited by 115
Model predictive control strategies for buildings with mixed-mode cooling
Hu, J., & Karava, P. (2013) · Building and Environment · doi:10.1016/j.buildenv.2013.09.005 · Cited by 115
Li, X., & Malkawi, A. M. (2016) · Energy · doi:10.1016/j.energy.2016.07.021 · Cited by 115
Perez, K. X., Bâldea, M., & Edgar, T. F. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.003 · Cited by 114
A software framework for model predictive control with GenOpt
Coffey, B., Haghighat, F., Morofsky, E., & Kutrowski, E. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.01.022 · Cited by 110
Adaptive HVAC zone modeling for sustainable buildings
Platt, G., Li, J., Li, R., Poulton, G., James, G., & Wall, J. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2009.10.009 · Cited by 108 · cited 1×
“GAs were also used to identify the key thermal parameters of a zone model based on measurements [32], as well as for the optimization of ANN models [33] for the”
Cigler, J., Prívara, S., Váňa, Z., Žáčeková, E., & Ferkl, L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.05.022 · Cited by 108 · cited 1×
“Even if it provides a more detailed indication of the human thermal sensation than set-points or thermal bounds, the introduction of PMV in an MPC problem has significant drawbacks [124,125].”
Favoino, F., Fiorito, F., Cannavale, A., Ranzi, G., & Overend, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.107 · Cited by 106 · cited 1×
“Important steps in this direction were already made in [50,51,74,92,108,145].”
Castilla, M., Álvarez, J. D., Normey-Rico, J. E., & Rodríguez, F. (2013) · Journal of Process Control · doi:10.1016/j.jprocont.2013.08.009 · Cited by 105
Chen, X., Wang, Q., & Srebric, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.11.065 · Cited by 105
Control strategies for integration of thermal energy storage into buildings: State-of-the-art review
Yu, Z. J., Huang, G., Haghighat, F., Li, H., & Zhang, G. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.05.038 · Cited by 104 · cited 1×
“, ventilation systems [35], ground-coupled heat pumps [36], thermal storages [37], window control [38], etc.”
Heating control schemes for energy management in buildings
Paris, B., Eynard, J., Grieu, S., Talbert, T., & Polit, M. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.027 · Cited by 104
Model predictive control of VAV zone thermal systems concerning bi-linearity and gain nonlinearity
Huang, G. (2011) · Control Engineering Practice · doi:10.1016/j.conengprac.2011.03.005 · Cited by 103 · cited 1×
“, minimum or maximum power of a heat pump [112] or a terminal unit [104], valve/damper position limits [113]) and for the rate of change of their operation (e.”
Model predictive HVAC control with online occupancy model
Dobbs, J. R., & Hencey, B. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.051 · Cited by 102
Karlsson, H., & Hagentoft, C.-E. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.08.014 · Cited by 100
Energy-efficient control of under-actuated HVAC zones in commercial buildings
Brooks, J., Kumar, S. P., Goyal, S., Subramany, R., & Barooah, P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.01.050 · Cited by 100
del Real, A. J., Arce, A., & Bordons, C. (2013) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2013.06.035 · Cited by 98
Model predictive control of radiant slab systems with evaporative cooling sources
Feng, J. D., Chuang, F., Borrelli, F., & Bauman, F. S. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.037 · Cited by 95
Efficient building energy management using distributed model predictive control
Scherer, H. F., Pasamontes, M., Guzmán, J. L., Álvarez, J. D., Camponogara, E., & Normey-Rico, J. E. (2013) · Journal of Process Control · doi:10.1016/j.jprocont.2013.09.024 · Cited by 95 · cited 1×
“An excellent comparison between the performance of centralized, decentralized and distributed in building energy management MPC configurations is presented in [92,104,106].”
Ascione, F., Bianco, N. D., Stasio, C. D., Mauro, G. M., & Vanoli, G. P. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.02.010 · Cited by 95
Occupant-oriented mixed-mode EnergyPlus predictive control simulation
Zhao, J., Lam, K. P., Ydstie, B. E., & Loftness, V. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.09.027 · Cited by 94 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Building modeling: Selection of the most appropriate model for predictive control
Prívara, S., Váňa, Z., Žáčeková, E., & Cigler, J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.08.040 · Cited by 93 · cited 2×
“The measured response is generally the indoor air temperature; in some cases, mainly simulated, the measured response can also include the average walls or other building components temperature [61].”
Naidu, D. S., & Rieger, C. G. (2011) · Science and Technology for the Built Environment · doi:10.1080/10789669.2011.540942 · Cited by 91 · cited 1×
“In [3,42] an entire section is focused on MPC, and a summary of its main features and advantages for energy management is provided.”
Zong, Y., Böning, G. M., Santos, R. M., You, S., Hu, J., & Han, X. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.141 · Cited by 91
MPC control for improving energy efficiency of a building air handler for multi-zone VAVs
Liang, W., Quinte, R., Jia, X., & Sun, J. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.04.033 · Cited by 86
Predictive control methods to improve energy efficiency and reduce demand in buildings
Salsbury, T. I., Mhaskar, P., & Qin, S. J. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.08.003 · Cited by 85
Calculation of optimal thermal load of intermittently heated buildings
Ghiaus, C., & Hazyuk, I. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.02.017 · Cited by 83
Intermediate complexity model for Model Predictive Control of Integrated Room Automation
Lehmann, B., Gyalistras, D., Gwerder, M., Wirth, K., & Carl, S. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.12.007 · Cited by 82
Garnier, A., Eynard, J., Caussanel, M., & Grieu, S. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2015.09.022 · Cited by 79
Energy efficient model predictive building temperature control
Wallace, M., McBride, R., Aumi, S., Mhaskar, P., House, J. M., & Salsbury, T. I. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.07.023 · Cited by 79 · cited 3×
“, the internal set-point temperature [117,135]) has to be minimized and the fact that the penalty function is quadratic helps with stability and reduced computational effort of the controller (e.”
Zhao, J., Lam, K. P., Ydstie, B. E., & Karaguzel, O. T. (2014) · Journal of Building Performance Simulation · doi:10.1080/19401493.2014.891656 · Cited by 76
Hu, J., & Karava, P. (2014) · Building and Environment · doi:10.1016/j.buildenv.2014.05.003 · Cited by 76
Modeling and optimization of HVAC systems using artificial neural network and genetic algorithm
Nassif, N. (2013) · Building Simulation · doi:10.1007/s12273-013-0138-3 · Cited by 73
Field tests of an adaptive, model-predictive heating controller for residential buildings
Lindelöf, D., Afshari, H., Alisafaee, M., Biswas, J., Caban, M., Mocellin, X., & Viaene, J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.04.029 · Cited by 71 · cited 1×
“, maximum or minimum bounds for the indoor temperature [110]), or the allowable temperature range affecting an active building component (e.”
Model-based energy efficient control applied to an office building
Váňa, Z., Cigler, J., Široký, J., Žáčeková, E., & Ferkl, L. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2014.01.016 · Cited by 69
An optimal control algorithm for borehole thermal energy storage systems
Ridder, F. D., Diehl, M., Mulder, G., Desmedt, J., & Bael, J. V. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.07.015 · Cited by 69 · cited 7×
“, non-linearly dependent on system states and disturbances), it can be included in the optimization problem with a non-linear cost function, similarly to the case of the PMV [133,134].”
InfluentialManagement of hybrid energy supply systems in buildings using mixed-integer model predictive control
Mayer, B., Killian, M., & Kozek, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.02.076 · Cited by 66 · cited 1×
“This fact can be achieved either by including a constant or linear representation of the Coefficient of Performance (COP) of the studied unit in the control-oriented model or in the linear cost function [68,90,100].”
Model predictive control of thermal storage for demand response
Kircher, K. J., & Zhang, K. M. (2015) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2015.7170857 · Cited by 65 · cited 1×
“Important steps in this direction were already made in [50,51,74,92,108,145].”
Bemporad, A. (2015) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2015.2417851 · Cited by 65 · cited 1×
“While in implicit MPC the control law is defined by solving the optimization problem in real-time, in explicit MPC multi-parametric programming algorithms are run offline to recast the control law as a lookup table of linear gains [55].”
Self-citationModel Predictive Control for a Smart Solar Tank Based on Weather and Consumption Forecasts
Halvgaard, R., Bacher, P., Perers, B., Andersen, E., Furbo, S., Jørgensen, J. B., Poulsen, N. K., & Madsen, H. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.11.032 · Cited by 64 · cited 2×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Modeling environment for model predictive control of buildings
Žakula, T., Armstrong, P. R., & Norford, L. K. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.09.039 · Cited by 62 · cited 1×
“Some of these studies demonstrated how the computational time required by the optimization of a high fidelity model in TRNSYS exceeds the control sampling time [79].”
Control algorithms for dynamic windows for residential buildings
Firląg, S., Yazdanian, M., Curcija, C. D., Köhler, C., Vidanovic, S., Hart, R., & Czarnecki, S. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.09.069 · Cited by 61 · cited 1×
“, ventilation systems [35], ground-coupled heat pumps [36], thermal storages [37], window control [38], etc.”
Energy-Efficient Building HVAC Control Using Hybrid System LBMPC
Aswani, A. J., Master, N., Taneja, J., Krioukov, A., Culler, D., & Tomlin, C. J. (2012) · IFAC Proceedings Volumes · doi:10.3182/20120823-5-nl-3013.00069 · Cited by 61
Model predictive control for commercial buildings: trends and opportunities
Hilliard, T., Kavgic, M., & Swan, L. G. (2015) · Advances in Building Energy Research · doi:10.1080/17512549.2015.1079240 · Cited by 60 · cited 2×
“[22] published in 2014 an excellent review of trend and opportunities for MPC implementation in commercial buildings.”
Fast stochastic predictive control for building temperature regulation
Ma, Y., & Borrelli, F. (2012) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2012.6315347 · Cited by 59 · cited 1×
“There are three main categories of measured disturbances affecting an MPC problem for HVAC system and building energy management:”
Vaghefi, S. A., Jafari, M. A., Zhu, J., Brouwer, J., & Lu, Y. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2014.2356337 · Cited by 58 · cited 1×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Model Predictive Control of thermal comfort as a benchmark for controller performance
Hazyuk, I., Ghiaus, C., & Penhouet, D. (2014) · Automation in Construction · doi:10.1016/j.autcon.2014.03.016 · Cited by 55 · cited 1×
“In almost all these studies the MPC algorithm outperforms the baseline controller also concerning satisfaction of the comfort requirements [151].”
Cooperative fuzzy model predictive control for heating and cooling of buildings
Killian, M., Mayer, B., & Kozek, M. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.12.017 · Cited by 55
Mady, A. E., Provan, G. M., Ryan, C., & Brown, K. N. (2011) · Proceedings of the AAAI Conference on Artificial Intelligence · doi:10.1609/aaai.v25i1.7802 · Cited by 54 · cited 4×
“These methods are compulsory for the forecast of occupancy related disturbances that are specific to each case study [50].”
InfluentialControl of HVAC systems via scenario-based explicit MPC
Parisio, A., Fabietti, L., Molinari, M., Varagnolo, D., & Johansson, K. H. (2014) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2014.7040202 · Cited by 54 · cited 1×
“, natural/mechanical ventilation mode or charging/discharging of a battery [67,69]), or scheduling problems (e.”
An intelligent agent based approach for energy management in commercial buildings
Hagras, H., Packharn, I., Vanderstockt, Y., McNulty, N., Vadher, A., & Doctor, F. (2008) · IEEE International Conference on Fuzzy Systems (FUZZ-IEEE) · doi:10.1109/fuzzy.2008.4630359 · Cited by 54 · cited 1×
“After being trained, it can perform predictions at relatively high speed [27].”
Optimal energy management of a small-size building via hybrid model predictive control
Khakimova, A., Kusatayeva, A., Shamshimova, A., Sharipova, D., Bemporad, A., Familiant, Y. L., Shintemirov, A., Ten, V., & Rubagotti, M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.01.045 · Cited by 54 · cited 2×
“For example, in [98] minimum and maximum daily forecasted temperature were used to correct the trajectory of an offline prediction; or in [99] the Support Vector Machine (SVM) method was used to forecast day-ahead electricity tariff prices based on past spot market prices and grid load levels.”
Self-citationEnergy-efficient fuzzy model-based multivariable predictive control of a HVAC system
Preglej, A., Rehrl, J., Schwingshackl, D., Steiner, I., Horn, M., & Škrjanc, I. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.042 · Cited by 53 · cited 2×
“, the internal set-point temperature [117,135]) has to be minimized and the fact that the penalty function is quadratic helps with stability and reduced computational effort of the controller (e.”
Comparison of Short-Term Weather Forecasting Models for Model Predictive Control
Florita, A. R., & Henze, G. P. (2009) · Science and Technology for the Built Environment · doi:10.1080/10789669.2009.10390868 · Cited by 53 · cited 1×
“.”
Semi-automated modular modeling of buildings for model predictive control
Sturzenegger, D., Gyalistras, D., Morari, M., & Smith, R. S. (2012) · ACM International Conference on Systems for Energy-Efficient Buildings, Cities, and Transportation (BuildSys) · doi:10.1145/2422531.2422550 · Cited by 52 · cited 1×
“Toolboxes for the automatic generation of control-oriented R-C models were also recently developed [85,86].”
Nonlinear model reduction and model predictive control of residential buildings with energy recovery
Touretzky, C. R., & Bâldea, M. (2013) · Journal of Process Control · doi:10.1016/j.jprocont.2013.09.022 · Cited by 52
Co-scheduling of HVAC control, EV charging and battery usage for building energy efficiency
Wei, T., Zhu, Q., & Maasoumy, M. (2014) · International Conference on Computer Aided Design · doi:10.1109/iccad.2014.7001351 · Cited by 49
An MPC-based Energy Management System for multiple residential microgrids
Parisio, A., Wiezorek, C., Kyntäjä, T., Elo, J., & Johansson, K. H. (2015) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2015.7294033 · Cited by 48 · cited 1×
“For example, the MPC formulation can be used to control and optimize residential appliances [11–13], the building interaction with a smart grid or micro-grid [14–19], or an on-site renewable energy generation system.”
Fiorentini, M., Cooper, P. W., Ma, Z., & Robinson, D. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.12.192 · Cited by 47 · cited 1×
“, natural/mechanical ventilation mode or charging/discharging of a battery [67,69]), or scheduling problems (e.”
Self-citationSelecting building predictive control based on model uncertainty
Maasoumy, M., Razmara, M., Shahbakhti, M., & Sangiovanni-Vincentelli, A. L. (2014) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2014.6858875 · Cited by 46
A scenario-based distributed stochastic MPC for building temperature regulation
Long, Y., Liu, S., Xie, L., & Johansson, K. H. (2014) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2014.6899461 · Cited by 46
Decentralized predictive thermal control for buildings
Chandan, V., & Alleyne, A. G. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2014.02.015 · Cited by 44
Model Predictive Control of a Swiss Office Building
Sturzenegger, D., Gyalistras, D., Gwerder, M., Sagerschnig, C., Morari, M., & Smith, R. S. (2013) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000078384 · Cited by 44
Advanced cooling technology with thermally activated building surfaces and model predictive control
Žakula, T., Armstrong, P. R., & Norford, L. K. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.10.054 · Cited by 42
Economic Model Predictive Control - A Review
Tran, T., Ling, K. V., & Maciejowski, J. M. (2014) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2014/0006 · Cited by 39 · cited 1×
“While this takes into consideration the building operational cost, it also implies that the cost function cannot be used as a traditional Lyapunov function to prove closed-loop stability [53].”
Power Admission Control With Predictive Thermal Management in Smart Buildings
Yao, J., Costanzo, G. T., Zhu, G., & Wen, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2387091 · Cited by 38
Model-based predictive control of office window shades
Huchuk, B., Gunay, B., O’Brien, W., & Cruickshank, C. A. (2015) · Building Research & Information · doi:10.1080/09613218.2016.1101949 · Cited by 38
Energy-comfort optimization using discomfort history and probabilistic occupancy prediction
Majumdar, A., Setter, J. L., Dobbs, J. R., Hencey, B., & Albonesi, D. H. (2014) · International Green and Sustainable Computing Conference · doi:10.1109/igcc.2014.7039173 · Cited by 35
A New Zone Temperature Predictive Modeling for Energy Saving in Buildings
Huang, H. M., Chen, L., Mohammadzaheri, M., & Hu, E. J. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.10.122 · Cited by 34 · cited 1×
“Up to date, the Illawarra Flame house [67–69] in Wollongong and 10 households in Brugg [111], the 3E Headquarters in Brussels [149] and a commercial Building in Allschwil [82,116], a building of the Czech Technical University in Prague [115,153], the UC Merced Campus [62] and the Engineers Construction Engineering Res…”
Modelling and disturbance estimation for model predictive control in building heating systems
O’Dwyer, E., Tommasi, L. D., Kouramas, K. I., Cychowski, M. T., & Lightbody, G. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.08.077 · Cited by 34
Acosta, A., Santos, A. I. G., Zamarreño, J. M., & Álvarez, V. N. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.07.061 · Cited by 33
Least-restrictive robust periodic model predictive control applied to room temperature regulation
Gondhalekar, R., Oldewurtel, F., & Jones, C. N. (2013) · Automatica · doi:10.1016/j.automatica.2013.05.009 · Cited by 31
Power supply–demand balance in a Smart Grid: An information sharing model for a market mechanism
Larsen, G. K. H., van Foreest, N. D., & Scherpen, J. M. A. (2013) · Applied Mathematical Modelling · doi:10.1016/j.apm.2013.11.042 · Cited by 30 · cited 1×
“For example, the MPC formulation can be used to control and optimize residential appliances [11–13], the building interaction with a smart grid or micro-grid [14–19], or an on-site renewable energy generation system.”
Prioritised objectives for model predictive control of building heating systems
O’Dwyer, E., Tommasi, L. D., Kouramas, K. I., Cychowski, M. T., & Lightbody, G. (2017) · Control Engineering Practice · doi:10.1016/j.conengprac.2017.03.018 · Cited by 29
Adaptive Diurnal Prediction of Ambient Dry-Bulb Temperature and Solar Radiation
Ren, M. J., & Wright, J. A. (2002) · Science and Technology for the Built Environment · doi:10.1080/10789669.2002.10391297 · Cited by 28 · cited 1×
“The simplest method for offline predictions is based on a rule of thumb that states that “the conditions of the next hours would be only slightly different from those of the previous time period” [51,95,96].”
Opportunities for Implementation of MPC in Commercial Buildings
Kavgic, M., Hilliard, T., & Swan, L. G. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.11.300 · Cited by 28 · cited 2×
“Results of this work were used by the same authors also in [43] to define which are the primary requirements of a commercial building to be controlled appropriately by MPC.”
Hybrid model predictive control of stratified thermal storages in buildings
Berkenkamp, F., & Gwerder, M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.052 · Cited by 27
Herrera, E., Bourdais, R., & Guéguen, H. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.076 · Cited by 26
Distributed model predictive control for building temperature regulation
Moroşan, P.-D., Bourdais, R., Dumur, D., & Buisson, J. (2010) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2010.5530977 · Cited by 26 · cited 1×
“For example, a terminal constraint can be used to ensure that a TES tank continuously stores a minimum level of energy to satisfy the demand of the following day [116].”
Explicit MPC approach to PMV-based thermal comfort control
Klaučo, M., & Kvasnica, M. (2014) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2014.7040147 · Cited by 25 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Hilliard, T., Swan, L. G., Kavgic, M., Qin, Z., & Lingras, P. J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.051 · Cited by 25 · cited 1×
“…Linear cost functions are the most common in building energy management in problems where the costs allocated to the elements of the weighting matrices must be comparable with each other, for example when trying to minimize building operating cost or maximize RES exploitation in an economic MPC”
Sandoval, D., Goffin, P., & Leibundgut, H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.026 · Cited by 24 · cited 1×
“Moreover, the increasing spread of RES and small-size poly-generation systems (potentially integrating Thermal Energy Storage (TES) systems) in buildings, is definitively changing the paradigm of energy distribution and the role of buildings in the grid [4].”
Lauro, F., Longobardi, L., & Panzieri, S. (2014) · doi:10.1109/iwies.2014.6957043 · Cited by 23 · cited 4×
“An excellent comparison between the performance of centralized, decentralized and distributed in building energy management MPC configurations is presented in [92,104,106].”
InfluentialBuildingLAB: A tool to analyze performance of model predictive controllers for buildings
Cigler, J., Tomáško, P., & Široký, J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.10.042 · Cited by 23 · cited 1×
“When the MPC is retrofitted to an existing building, the building baseline performance before the MPC implementation could be used as a reference [195].”
Exergy-based model predictive control for building HVAC systems
Razmara, M., Maasoumy, M., Shahbakhti, M., & Robinett, R. D. (2015) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2015.7170974 · Cited by 22
López, A. M., Sánchez, L., Doctor, F., Hagras, H., & Callaghan, V. (2005) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/icsmc.2004.1398270 · Cited by 21 · cited 1×
“Smart controllers could be optimally tuned for the control of different subsystems of an intelligent building using evolutionary algorithms [26].”
Load forecasting for the efficient energy management of HVAC systems
Beghi, A., Cecchinato, L., Rampazzo, M., & Simmini, F. (2010) · IEEE International Conference on Sustainable Energy Technologies · doi:10.1109/icset.2010.5684414 · Cited by 21 · cited 1×
“The most common AI approach are the Artificial Neural Networks (ANNs) that have been used extensively for the building predictions and HVAC control strategies [28,29].”
Huang, H. M., Chen, L., & Hu, E. J. (2015) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2015.7170745 · Cited by 20
Cooperative and hierarchical fuzzy MPC for building heating control
Mayer, B., Killian, M., & Kozek, M. (2014) · IEEE International Conference on Fuzzy Systems (FUZZ-IEEE) · doi:10.1109/fuzz-ieee.2014.6891573 · Cited by 19
On the effects of MPC on a domestic energy efficiency optimization methodology
Molderink, A., Bakker, V., Bosman, M. G. C., Hurink, J. L., & Smit, G. J. M. (2010) · IEEE International Energy Conference (ENERGYCON) · doi:10.1109/energycon.2010.5771660 · Cited by 18
Capozzoli, A., Grassi, D., Piscitelli, M. S., & Serale, G. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.12.212 · Cited by 18 · cited 1×
“For this reason, if the information gathered is properly processed through data-driven procedures, it may provide crucial knowledge on the actual building performance and the influence of occupant behavior on the building energy demand [8,9].”
Self-citationOffset-free model predictive control for an energy efficient tropical island hotel
Lara, B. G. V., Molina, L. M. C., Yanes, J. P. M., & Borroto, M. Á. R. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.03.040 · Cited by 18
Predictive and interactive controllers for solar absorption cooling systems in buildings
Herrera, E., Bourdais, R., & Guéguen, H. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2014.03.008 · Cited by 16
Using the National Digital Forecast Database for model-based building controls
Kim, S. H., & Augenbroe, G. (2012) · Automation in Construction · doi:10.1016/j.autcon.2012.05.012 · Cited by 14 · cited 2×
“For example, in [98] minimum and maximum daily forecasted temperature were used to correct the trajectory of an offline prediction; or in [99] the Support Vector Machine (SVM) method was used to forecast day-ahead electricity tariff prices based on past spot market prices and grid load levels.”
Youssef, K. H. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.07.015 · Cited by 13
Model Predictive Control for the heating system of a public building
Carrascal, E., Garrido, I., Garrido, A. J., & Sala, J. M. (2014) · World Automation Congress (WAC) · doi:10.1109/wac.2014.6935986 · Cited by 12
Hybrid MPC approach to reconfiguration of building heating system
Široký, J., Cigler, J., & Ferkl, L. (2013) · European Control Conference (ECC) · doi:10.23919/ecc.2013.6669256 · Cited by 8 · cited 1×
“Additional complexity can also derive from an intermittent nature of the energy delivery, which leads to the formulation of an optimal controller of a hybrid system, due to the combination of continuous and Boolean variables in the optimization problem [93].”
Barata, F. A., & Neves‐Silva, R. (2014) · IFIP advances in information and communication technology · doi:10.1007/978-3-642-54734-8_34 · Cited by 7 · cited 1×
“Important steps in this direction were already made in [50,51,74,92,108,145].”
On predicted mean vote optimization in building climate control
Cigler, J., Prívara, S., Váňa, Z., Žáčeková, E., & Ferkl, L. (2012) · Mediterranean Conference on Control and Automation (MED) · doi:10.1109/med.2012.6265854 · Cited by 6 · cited 1×
“Even if it provides a more detailed indication of the human thermal sensation than set-points or thermal bounds, the introduction of PMV in an MPC problem has significant drawbacks [124,125].”
Different Optimal Control Strategies for Exploitation of Demand Response in the Smart Grid
Zong, Y., Bindner, H. W., & Gehrke, O. (2012) · IFAC Proceedings Volumes · doi:10.3182/20120913-4-it-4027.00008 · Cited by 6
Nonlinear model predictive control for energy efficient housing with modern construction materials
Novoselnik, B., Ćesić, J., Baotić, M., & Petrovic, I. K. (2015) · IEEE Sensors Applications Symposium (SAS) · doi:10.1109/sas.2015.7133614 · Cited by 3
Building Indoor Temperature Control Using Model Predictive Control in Cooling Systems
Boo, C.-J., Kim, J.-H., Kim, H.-C., & Lee, K. Y. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.12.397 · Cited by 3
Marušić, A., & Lončar, D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.05.200 · Cited by 3
Data Acquisition for Building Energy Analysis
Magoulès, F., & Zhao, H. (2016) · Wiley eBooks · doi:10.1002/9781118577691.ch2 · Cited by 2
Research works printed but not linked: 8
- American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) (2013). 2013 ASHRAE Handbook—Fundamentals (SI Edition), American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
- Curtiss, P.S. (July, January 28). Examples of Neural Networks Used for Building System Control and Energy Management. Proceedings of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Annual Meeting, Boston, MA, USA.
- Oldewurtel, F., Parisio, A., Jones, C.N., Morari, M., Gyalistras, D., Gwerder, M., Stauch, V., Lehmann, B., and Wirth, K. (July, January 30). Energy efficient building climate control using Stochastic Model Predictive Control and weather predictions. Proceedings of the American Control Conference (ACC), Baltimore, MD, USA.
- Dobre, C., and Xhafa, F. (2016). Enhancing energy efficiency in buildings through innovative data analytics technologies. Next Generation Platforms for Intelligent Data Collection, Elsevier.
- De Cursi, E.S., and Sampaio, R. (2015). Uncertainty Quantification and Stochastic Modeling with Matlab, ISTE Press—Elsevier. [1st ed.].
- Béguery, P., Industries, S., and Merlin, P.L. (2001, January 23–27). Model predictive control for energy management in buildings. Part 2: Distributed Model Predictive Control. Proceedings of the 4th IFAC Conference on Nonlinear Model Predictive Control, Noordwijkerhout, The Netherlands.
- Fanger, P. (1972). Thermal Comfort: Analysis and Applications in Environmental Engineering, McGraw-Hill.
- Cengel, Y.A., and Ghajar, A.J. (2014). Heat and Mass Transfer: Fundamentals and Applications, McGraw-Hill. [5th ed.].
Cited by
Review on model predictive control: an engineering perspective
Schwenzer, M., Ay, M., Bergs, T., & Abel, D. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07682-3 · Cited by 1,132
“Coupled resistancecapacitance models based on physical principles and pure empirical approaches are the two main types of modeling building energy systems for MPC [113].”
BackgroundMethodInfluentialAll you need to know about model predictive control for buildings
Drgoňa, J., Arroyo, J., Cupeiro Figueroa, I., Blum, D., Arendt, K., Kim, D., Ollé, E. P., Oravec, J., Wetter, M., Vrabie, D. L., et al. (2020) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2020.09.001 · Cited by 1,020
Himeur, Y., Elnour, M., Fadli, F., Meskin, N., Petri, I., Rezgui, Y., Bensaali, F., & Amira, A. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10286-2 · Cited by 541
Yao, Y., & Shekhar, D. K. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.107952 · Cited by 447
Zhang, Q., Meng, Z., Hong, X., Zhan, Y., Liu, J., Dong, J., Bai, T., Niu, J., & Deen, M. J. (2021) · Journal of Systems Architecture · doi:10.1016/j.sysarc.2021.102253 · Cited by 351
Metadata
- Authors
- Serale, G., Fiorentini, M., Capozzoli, A., Bernardini, D., & Bemporad, A.
- Affiliations
- Politecnico di Torino (IT)
- University of Wollongong (AU)
- ODYS S.r.l., Via Pastrengo, 14, 20159 Milano, Italy
- IMT School for Advanced Studies Lucca (IT)
- Corresponding author
- Serale, Gianluca
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2018-03-12
- Volume
- 11
- Issue
- 3
- Pages
- 631
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2789880759
- Cited by
- 637
- References
- 178
- Citations by year
- 2026: 84 · 2025: 93 · 2024: 70 · 2023: 96 · 2022: 85 · 2021: 100 · 2020: 61 · 2019: 38 · 2018: 10
- FWCI
- 41.83
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- PORTO@Iris (submittedVersion, cc-by)
- Research Online (University of Wollongong) (submittedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion)
- Funders
- Politecnico di Torino
- Topics
- Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
- Physical Sciences › Engineering › Control and Systems Engineering › Advanced Control Systems Optimization
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Integrated Energy Systems Optimization
- Keywords
- model predictive control, building energy efficiency, HVAC systems, building thermal management, building thermal mass, indoor thermal comfort, building energy demand, building automation, disturbance prediction, multi-objective optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.