Numerical Study of Latent Heat Thermal Energy Storage Enhancement by Nano-PCM in Aluminum Foam
Open accessThe DOI matches its Crossref record; 25 of the 27 references it cites were found in a registry or an index.
Abstract
Thermal storage system (TES) with phase change material (PCM) is an important device to store thermal energy. It works as a thermal buffer to reconcile the supply energy with the energy demand. It has a wide application field, especially for solar thermal energy storage. The main drawback is the low value of thermal conductivity of the PCM making the system useless for thermal engineering applications. A way to resolve this problem is to combine the PCM with a highly conductive material like metal foam and/or nanoparticles. In this paper a numerical investigation on the metal foam effects in a latent heat thermal energy storage system, based on a phase change material with nanoparticles (nano-PCM), is accomplished. The modelled TES is a typical 70 L water tank filled with nano-PCM with pipes to transfer thermal energy from a fluid to the nano-PCM. The PCM is a pure paraffin wax and the nanoparticles are in aluminum oxide. The metal foam is made of aluminum with assigned values of porosity. The enthalpy-porosity theory is employed to simulate the phase change of the nano-PCM and the metal foam is modelled as a porous media. Numerical simulations are carried out using the Ansys Fluent code. The results are shown in terms of melting time, temperature at varying of time, and total amount of stored energy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The foam did have the drawback of decreasing the energy storage capacity [89].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [89]
The cited source says what the claim attributes to it.
In the citing paper
“The NPs alone showed very little improvement over the pure PCM.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [89]
The cited source says what the claim attributes to it.
In the citing paper
“The metal foam significantly improved the system, and the system with nano-PCM in metal foam had the quickest melting time of all the systems.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [89]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Voller, V. R., & Prakash, C. (1987) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(87)90317-6 · Cited by 2,652
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,762
An overview of thermal energy storage systems
Alva, G., Lin, Y., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2017.12.037 · Cited by 1,408
Forced Convection in High Porosity Metal Foams
Calmidi, V. V., & Mahajan, R. L. (2000) · Journal of Heat Transfer · doi:10.1115/1.1287793 · Cited by 1,166
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Liu, Z., Yao, Y., & Wu, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.022 · Cited by 405
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., & Kenny, J. M. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-448 · Cited by 381
Mahdi, J. M., & Nsofor, E. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.036 · Cited by 322
CFD applications for latent heat thermal energy storage: a review
Al-abidi, A. A., Bin Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammed, A. T. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.079 · Cited by 318
Enhanced Specific Heat of Silica Nanofluid
Shin, D., & Banerjee, D. (2011) · Journal of Heat Transfer · doi:10.1115/1.4002600 · Cited by 256
Ebadi, S., Tasnim, S. H., Aliabadi, A. A., & Mahmud, S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.016 · Cited by 200
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Siahpush, A., O’Brien, J., & Crepeau, J. (2008) · Journal of Heat Transfer · doi:10.1115/1.2928010 · Cited by 196
A Two-Temperature Model for Solid-Liquid Phase Change in Metal Foams
Krishnan, S., Murthy, J. Y., & Garimella, S. V. (2005) · Journal of Heat Transfer · doi:10.1115/1.2010494 · Cited by 180
Investigation of finned heat sink performance with nano enhanced phase change material (NePCM)
Bayat, M., Faridzadeh, M. R., & Toghraie, D. S. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.10.021 · Cited by 153
Energy storage system based on nanoparticle-enhanced phase change material inside porous medium
Hossain, R., Mahmud, S., Dutta, A., & Pop, I. V. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.12.023 · Cited by 150
Ren, Q., Meng, F., & Guo, P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.046 · Cited by 149
Li, Z., & Wu, Z. (2015) · Solar Energy · doi:10.1016/j.solener.2015.09.019 · Cited by 117
Numerical study of the melting of nano-enhanced phase change material in a square cavity
Sebti, S. S., Mastiani, M., Mirzaei, H., Dadvand, A., Kashani, S., & Hosseini, S. A. (2013) · Journal of Zhejiang University SCIENCE A · doi:10.1631/jzus.a1200208 · Cited by 112
Nano-Phase Change Materials for Electronics Cooling Applications
Colla, L., Ercole, D., Fedele, L., Mancin, S., Manca, O., & Bobbo, S. (2017) · Journal of Heat Transfer · doi:10.1115/1.4036017 · Cited by 68
Self-citationFang, Y., Niu, J., & Deng, S. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.12.006 · Cited by 67
An investigation of thermal characteristics of eutectic molten salt-based nanofluids
Ercole, D., Manca, O., & Kambiz Vafai, B. (2017) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2017.06.022 · Cited by 45
Self-citation
Research works printed but not linked: 1
- Khyad, 2016, State of the art review of thermal energy storage systems using PCM operating with small temperature differences: Focus on Paraffin, J. Mater. Environ. Sci., 7, 1184
Cited by
Cui, W. L., Si, T., Li, X., Li, X., Lu, L., Ma, T., & Wang, Q. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112912 · Cited by 153
A review of nanomaterial incorporated phase change materials for solar thermal energy storage
Nazari, M. A., Maleki, A., Assad, M. E. H., Rosen, M. A., Haghighi, A., Sharabaty, H., & Chen, L. (2021) · Solar Energy · doi:10.1016/j.solener.2021.08.051 · Cited by 143
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“(2018) [89] RT 58 Paraffin (48–62 ◦C) Low Aluminum oxide NP, aluminum foam, heat pipes Melting Numerical (3D) Metal foam enhanced more than NPs; their combination was best.”
BackgroundMethodInfluentialSenobar, H., Aramesh, M., & Shabani, B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101911 · Cited by 111
Hamidi, E., Ganesan, P. B., Sharma, R. K., & Yong, K. W. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113196 · Cited by 94
Metadata
- Authors
- Buonomo, B., Di Pasqua, A., Ercole, D., & Manca, O.
- Affiliations
- University of Campania "Luigi Vanvitelli" (IT)
- Dipartimento di Ingegneria, Università degli Studi della Campania “Luigi Vanvitelli”, Via Roma 29, 81031 Aversa, Italy
- Corresponding author
- Manca, Oronzio
- Venue
- Inventions
- Publisher
- MDPI AG
- Published
- 2018-11-10
- Volume
- 3
- Issue
- 4
- Pages
- 76
- ISSN
- 2411-5134 (ISSN-L)
- OpenAlex
- W2899755855
- Cited by
- 26
- References
- 27
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 2 · 2023: 4 · 2022: 3 · 2021: 3 · 2020: 1 · 2019: 2
- FWCI
- 0.96
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Inventions (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Archivio Istituzionale della Ricerca - Università degli Studi della Campania "Luigi Vanvitelli" (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media
- Keywords
- latent heat storage, phase change materials, aluminum foam, metal foam, Al2O3 nanoparticles, alkanes, thermal conductivity enhancement, enthalpy-porosity method, porous media, melting time, solar thermal energy storage, water tanks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.