Fly Ash-Based Eco-Efficient Concretes: A Comprehensive Review of the Short-Term Properties
Open accessThe DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index.
Abstract
Development of sustainable concrete as an alternative to conventional concrete helps in reducing carbon dioxide footprint associated with the use of cement and disposal of waste materials in landfill. One way to achieve that is the use of fly ash (FA) as an alternative to ordinary Portland cement (OPC) because FA is a pozzolanic material and has a high amount of alumina and silica content. Because of its excellent mechanical properties, several studies have been conducted to investigate the use of alkali-activated FA-based concrete as an alternative to conventional concrete. FA, as an industrial by-product, occupies land, thereby causing environmental pollution and health problems. FA-based concrete has numerous advantages, such as it has early strength gaining, it uses low natural resources, and it can be configurated into different structural elements. This study initially presents a review of the classifications, sources, chemical composition, curing regimes and clean production of FA. Then, physical, fresh, and mechanical properties of FA-based concretes are studied. This review helps in better understanding of the behavior of FA-based concrete as a sustainable and eco-friendly material used in construction and building industries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
A comprehensive review on the applications of coal fly ash
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.016 · Cited by 1,737 · cited 3×
“Researchers have identified key applications for FA in the future based on the yearly time series data by recognizing a pattern of development using regression analysis [274,275] and the amount of FA to be used in choice and specific applications have been predicted, as shown in Figure 17 [92,276].”
BackgroundNew cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691 · cited 1×
“Small and spherical FA particles fill voids or airspaces and increase density [138,139].”
BackgroundGeopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597 · cited 1×
“3CH + CSH2 + A + 7H→ C4ASH12 3CH + 2S→ C3S2H3 A + 4CH + 9 H→ C4AH13 [23,32,130,209,210]”
Properties and applications of foamed concrete; a review
Amran, M., Farzadnia, N., & Ali, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.112 · Cited by 1,123 · cited 2×
“42 g/cm3, and their moisture content varies from 18% to 45% under the standard Proctor compaction effort [132].”
BackgroundSelf-citationResistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927 · cited 1×
“[117] discovered that the crack initiation thresholds and crack closure of FA-based AAM cured at high temperatures (60 ◦C–80 ◦C) were higher (30–60%) than those remedied at air temperature (23 ◦C and 40 ◦C).”
BackgroundGreen house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912 · cited 1×
“Researchers have identified key applications for FA in the future based on the yearly time series data by recognizing a pattern of development using regression analysis [274,275] and the amount of FA to be used in choice and specific applications have been predicted, as shown in Figure 17 [92,276].”
BackgroundClean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901 · cited 5×
“FAs characteristically comprise less calcium and more silicon than OPC and slags, thereby showing that SCMs with high calcium content can have their cementing characteristics.”
BackgroundInfluentialFly Ash-Based Geopolymer Concrete
Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2005) · Australian Journal of Structural Engineering · doi:10.1080/13287982.2005.11464946 · Cited by 885 · cited 1×
“FAbased AAM could be remedied at room temperature, but its strength grows gradually and continuously, and thereby, requires extended curing time [116].”
BackgroundUrban energy use and carbon emissions from cities in China and policy implications
Dhakal, S. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.05.020 · Cited by 824 · cited 1×
“AAMs with the average density of 2350 kg/m3 have a higher elastic modulus than those containing OPC [251].”
BackgroundGeopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817 · cited 1×
“Slab-ongrade 28 Industrial 100:0 75:15 80:20 0·65 0·60 0·60 20 20 20 Cube: 57·0 Cube: 49·0 Cube: 57·0 80 60 60 7·0 1·0 4·0 1·3 0·8 0·2 Slight corrosion found in FA concrete [220,221]”
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 651
Effect of fly ash fineness on compressive strength and pore size of blended cement paste
Chindaprasirt, P., Jaturapitakkul, C., & Sinsiri, T. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.07.003 · Cited by 612
Progressive utilisation prospects of coal fly ash: A review
Gollakota, A. R. K., Volli, V., & Shu, C.-M. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.337 · Cited by 548 · cited 6×
“Figure 2 shows the worldwide production and utilization of FA [23].”
BackgroundInfluentialAmran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Self-citationPhysical, chemical, and geotechnical properties of coal fly ash: A global review
Bhatt, A., Priyadarshini, S., Acharath Mohanakrishnan, A., Abri, A., Sattler, M., & Techapaphawit, S. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00263 · Cited by 525 · cited 2×
“Larger producer India (112/per year) 2019 [75,76] Consumed 3840 2015 4032 2032 Fly ash market US$4.”
BackgroundMechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448 · cited 1×
“3CH + CSH2 + A + 7H→ C4ASH12 3CH + 2S→ C3S2H3 A + 4CH + 9 H→ C4AH13 [23,32,130,209,210]”
Sata, V., Jaturapitakkul, C., & Kiattikomol, K. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.09.011 · Cited by 445 · cited 2×
“It is also often employed as OPC’s partial or whole replacement material in concrete production [24].”
BackgroundProperties of high volume glass powder concrete
Du, H., & Tan, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.10.010 · Cited by 437 · cited 5×
“FAs characteristically comprise less calcium and more silicon than OPC and slags, thereby showing that SCMs with high calcium content can have their cementing characteristics.”
BackgroundInfluentialDevelopment of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack
Sata, V., Sathonsaowaphak, A., & Chindaprasirt, P. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.010 · Cited by 415 · cited 1×
“exterior Ca additive content or in the FA to shape calcium aluminum silicate ((C-A-S-H) H = H2O, A = Al2O3, S = SiO2, C = CaO) gel, C-S-H gel or calcium aluminate hydrate (C-A-H) gel in the attendance of water [28,29,195].”
MethodAwalludin, M. F., Sulaiman, O., Hashim, R., & Nadhari, W. N. A. W. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.05.085 · Cited by 402 · cited 3×
“Recently, substantial effort has been exerted to develop eco-efficient cement concrete composites [16,17].”
BackgroundGeotechnical Properties of Fly and Bottom Ash Mixtures for Use in Highway Embankments
Kim, B., Prezzi, M., & Salgado, R. (2005) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)1090-0241(2005)131:7(914 · Cited by 398
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Joseph, B., & Mathew, G. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.07.006 · Cited by 374 · cited 1×
“It has been demonstrated that the modulus of elasticity and compressive strength of FA concrete are strongly correlated [228,229].”
BackgroundHigh-Strength Geopolymer Using Fine High-Calcium Fly Ash
Chindaprasirt, P., Chareerat, T., Hatanaka, S., & Cao, T. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000161 · Cited by 365 · cited 1×
“However, the farthest ESP hopper may have the greatest density, finest particle size, highest glass content, and lowest carbon content [69].”
BackgroundShaikh, F. U. A. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2016.05.009 · Cited by 362 · cited 3×
“The fibers for strengthening FA-based AAM composites include PVA fiber [247], steel fiber [2,248], sweet sorghum fiber [245], and cotton fiber [249,250].”
BackgroundChindaprasirt, P., Rukzon, S., & Sirivivatnanon, V. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.12.001 · Cited by 356 · cited 1×
“Furthermore, a low-calcium FA comprises nearly 3–24% mullite [57,105,109].”
BackgroundEffect of coal bottom ash as partial replacement of sand on properties of concrete
Singh, M., & Siddique, R. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2012.12.006 · Cited by 347
Influence of recycled aggregate on fly ash geopolymer concrete properties
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.109 · Cited by 333
Soil stabilization by calcium carbide residue and fly ash
Horpibulsuk, S., Phetchuay, C., & Chinkulkijniwat, A. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000370 · Cited by 324
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321 · cited 1×
“FA + palm oil fuel ash/Na2SiO3+NaOH <38 24 h/65 [233]”
BackgroundTangchirapat, W., Jaturapitakkul, C., & Chindaprasirt, P. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.01.008 · Cited by 308
Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement
Castel, A., & Foster, S. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.016 · Cited by 304
Ling, Y., Wang, K., Li, W., Shi, G., & Lü, P. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.092 · Cited by 301 · cited 1×
“Class C FAs have pozzolanic and cementitious properties [49].”
BackgroundThe Oil Palm Wastes in Malaysia
Abdullah, N., & Sulaim, F. (2013) · Biomass Now - Sustainable Growth and Use · doi:10.5772/55302 · Cited by 300
Fly ash characterization with reference to geotechnical applications
Pandian, N. S. (2004) · NOT FOUND REPOSITORY (Indian Institute of Science Bangalore) · Cited by 299
Islam, A. B. M. S., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.080 · Cited by 298
Utilization of oil palm kernel shell as lightweight aggregate in concrete – A review
Alengaram, U. J., Muhit, B. A. A., & Jumaat, M. Z. B. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.08.026 · Cited by 279
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
Duan, P., Yan, C., Luo, W., & Zhou, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.095 · Cited by 252 · cited 1×
“It was also reported that the chemical composition of FA has a slight effect, and the fineness of FA has the main impact on the early hydration rate of concrete [185].”
BackgroundUtilization of Palm Oil Fuel Ash in High-Strength Concrete
Sata, V., Jaturapitakkul, C., & Kiattikomol, K. (2004) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2004)16:6(623 · Cited by 250
Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetry
Mostafa, N. Y., & Brown, P. W. (2005) · Thermochimica Acta · doi:10.1016/j.tca.2005.05.014 · Cited by 249 · cited 2×
“In a previous study [241], recycled coarse aggregate (RCA) obtained from crushed structural concrete beams and clay was utilized in FA-based AAM to produce concrete with adequate mechanical characteristics [197,241–243].”
BackgroundMethodSlag uses in making an ecofriendly and sustainable concrete: A review
Amran, M., Murali, G., Khalid, N. H. A., Fediuk, R., Ozbakkaloglu, T., Lee, Y. H., Haruna, S., & Lee, Y. Y. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121942 · Cited by 241 · cited 1×
“On the other hand, in a cyclone furnace, up to 70–80% of the total ash that is retained as boiler slag from the crushed coal is utilized as fuel [74], while merely 20–30% of the total ash leaves the furnace in the flue gas as dry-ash [73].”
BackgroundSelf-citationZhang, M., El-Korchi, T., Zhang, G., Liang, J., & Tao, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.058 · Cited by 226
Mechanical and thermal properties of fly ash based geopolymers
Fan, F., Liu, Z., Xu, G., Peng, H., & Cai, C. S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.023 · Cited by 224
Fire resistance of high-volume fly ash mortars with nanosilica addition
Ibrahim, R. K., Hamid, R., & Taha, M. R. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.05.028 · Cited by 216 · cited 1×
“Voids limit the accumulation of pressure in the pores during compaction with the water content [5,137].”
BackgroundVassilev, S. V., Menéndez, R., Álvarez, D., Dı́az-Somoano, M., & Martínez-Tarazona, M. R. (2003) · Fuel · doi:10.1016/s0016-2361(03)00123-6 · Cited by 210
Concrete using waste oil palm shells as aggregate
Basri, H. B., Mannan, M. A., & Zain, M. F. M. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00233-6 · Cited by 209 · cited 1×
“For example, the AAMs activated by sodium hydroxide display a rapid strength weakening and a high shrinkage at a temperature of 800 ◦C, whereas those activated by KOH displays a substantial upsurge in strength while heating and strength weakening start at around 1000 ◦C [134].”
BackgroundRice Husk Ash-Based Concrete Composites: A Critical Review of Their Properties and Applications
Amran, M., Федюк, Р. С., Murali, G., Vatin, N. I., Karelina, M. Y., Ozbakkaloglu, T., Krishna, R. S., Sahoo, A. K., Das, S. K., & Mishra, J. (2021) · Crystals · doi:10.3390/cryst11020168 · Cited by 208
Self-citationEngineering properties of concrete with oil palm shell as coarse aggregate
Mannan, M. A., & Ganapathy, C. (2002) · Construction and Building Materials · doi:10.1016/s0950-0618(01)00030-7 · Cited by 208
Oil palm boom and land-use dynamics in Indonesia: The role of policies and socioeconomic factors
Gatto, M., Wollni, M., & Qaim, M. (2015) · Land Use Policy · doi:10.1016/j.landusepol.2015.03.001 · Cited by 207 · cited 6×
“Furthermore, FAs as binders or fillers are usually dumped in landfill and open fields, creating health hazards and environmental pollution issues [16,271].”
BackgroundInfluentialDurability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash
Ranjbar, N., Behnia, A., Alsubari, B., Moradi Birgani, P., & Jumaat, M. Z. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.033 · Cited by 207
Park, S., Wu, S., Liu, Z., & Pyo, S. (2021) · Materials · doi:10.3390/ma14061472 · Cited by 206 · cited 1×
“Other trace component concentrations differ by the type of coal burnt to form it [98,99].”
BackgroundArulrajah, A., Mohammadinia, A., Phummiphan, I., Horpibulsuk, S., & Samingthong, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.150 · Cited by 199
Islam, M. M. U., Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.051 · Cited by 197 · cited 1×
“Even in the same FA, the SG of coarse particles is minimal given the high carbon content; and considering the low SG, FA has a low unit weight [145].”
BackgroundAn alternative energy source from palm wastes industry for Malaysia and Indonesia
Mahlia, T. M. I., Abdulmuin, M. Z., Alamsyah, T. M. I., & Mukhlishien, D. (2001) · Energy Conversion and Management · doi:10.1016/s0196-8904(00)00166-7 · Cited by 196 · cited 1×
“On the contrary, Class C FA comprises burning coal lignite or younger sub-bituminous that have specific properties of self-cementing [42].”
BackgroundLightweight geopolymer concrete containing aggregate from recycle lightweight block
Posi, P., Teerachanwit, C., Tanutong, C., Limkamoltip, S., Lertnimoolchai, S., Sata, V., & Chindaprasirt, P. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.06.001 · Cited by 196 · cited 2×
“The particle morphologies of FA mainly affect the fluidity of the concrete and are mostly governed by the temperature of combustion, cooling rate, and particle composition [39].”
BackgroundZeyad, A. M., Megat Johari, M. A., Tayeh, B. A., & Yusuf, M. O. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.121 · Cited by 193 · cited 1×
“Furthermore, incorporating FA has a higher impact on elastic modulus than on compressive strength [253,254].”
BackgroundMechanism and Chemical Reaction of Fly Ash Geopolymer Cement- A Review
Abdullah, M. M. A. B., Kamarudin, H., Hussain, R. R., Ismail, K. N., Ibrahim, W. M. W., & Besar, P. (2011) · Journal of Asian Scientific Research · Cited by 191
Evaluation of the sulfate resistance of concrete containing palm oil fuel ash
Jaturapitakkul, C., Kiattikomol, K., Tangchirapat, W., & Saeting, T. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.07.005 · Cited by 186 · cited 1×
“Endeavors to reuse FA squanders were relatively successful, with about 70% of the total waste being reduced [20,21].”
BackgroundImpact of Alkali Silica Reaction on Fly Ash-Based Geopolymer Concrete
Kupwade-Patil, K., & Allouche, E. N. (2013) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000579 · Cited by 186
Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.036 · Cited by 184 · cited 1×
“Adding cotton to an FA-based AAM exhibited a similar trend for tensile strength [246].”
BackgroundAlengaram, U. J., Muhit, B. A. A., Jumaat, M. Z., & Jing, M. L. Y. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.04.078 · Cited by 182
Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer
Chindaprasirt, P., Rattanasak, U., & Taebuanhuad, S. (2013) · Materials and Structures · doi:10.1617/s11527-012-9907-1 · Cited by 181
Makul, N., Федюк, Р. С., Amran, M., Zeyad, A. M., Murali, G., Vatin, N. I., Klyuev, S. V., Ozbakkaloglu, T., & Vasilev, Y. (2021) · Crystals · doi:10.3390/cryst11030232 · Cited by 176
Self-citationSalih, M. A., Ali, A. A. A., & Farzadnia, N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.031 · Cited by 175 · cited 4×
“Bituminous FAs frequently have a shade of gray, with the light shades of gray commonly signifying a high ash quality [37].”
BackgroundInfluentialIslam, A., Alengaram, U. J., Jumaat, M. Z., Bashar, I. I., & Kabir, S. M. A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.026 · Cited by 170 · cited 1×
“FA together with other pozzolans is broadly approved by many design codes for utilization as an SCM in concrete, with an FA content of about 55%, according to CEM IV in BS EN 197 [25].”
BackgroundMemon, F. A., Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 170
Ali, B., Qureshi, L. A., Shah, S. H. A., Rehman, S. U., Hussain, I., & Iqbal, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118980 · Cited by 169 · cited 2×
“Generally, the constituents of FA classically include Fe2O3, SiO2, CaO, and Al2O3; and such compounds exist in the form of crystalline oxides and amorphous in several minerals [64].”
BackgroundCritical review on fly‐ash based geopolymer concrete
Meesala, C. R., Verma, N., & Kumar, S. (2019) · Structural Concrete · doi:10.1002/suco.201900326 · Cited by 165 · cited 1×
“3CH + CSH2 + A + 7H→ C4ASH12 3CH + 2S→ C3S2H3 A + 4CH + 9 H→ C4AH13 [23,32,130,209,210]”
Heat of hydration of Portland Cement–Metakaolin–Fly ash (PC–MK–PFA) blends
Snelson, D. G., Wild, S., & O’Farrell, M. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.004 · Cited by 158 · cited 1×
“It was also reported that the decrease in the total heat evolution with incorporating FA can be because of the relatively low specific surface area and low solubility of the aluminosilicate present in FA [270].”
BackgroundCharacterization of fly-ash cenospheres from coal-fired power plant unit
Żyrkowski, M., Neto, R. C., Santos, L. F., & Witkowski, K. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.061 · Cited by 153
Mushtaq, F., Abdullah, T. A. T., Mat, R., & Ani, F. N. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.02.055 · Cited by 150 · cited 1×
“FA particles are typically fine like cement and contain glassy rounded particles and residues of magnetite, quartz, hematite, mullite, char, and other crystalline phases formulated while cooling [61].”
BackgroundUse of rubber and bentonite added fly ash as a liner material
Çokça, E., & Yılmaz, Z. (2003) · Waste Management · doi:10.1016/j.wasman.2003.10.004 · Cited by 143
Palm Oil Fuel Ash-Based Eco-Efficient Concrete: A Critical Review of the Short-Term Properties
Amran, M., Murali, G., Федюк, Р. С., Vatin, N. I., Vasilev, Y., & Abdelgader, H. S. (2021) · Materials · doi:10.3390/ma14020332 · Cited by 142
Self-citationZeyad, A. M., Johari, M. A. M., Tayeh, B. A., & Yusuf, M. O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.065 · Cited by 141 · cited 1×
“The fibers for strengthening FA-based AAM composites include PVA fiber [247], steel fiber [2,248], sweet sorghum fiber [245], and cotton fiber [249,250].”
BackgroundIncineration Fly Ash and Its Treatment to Possible Utilization: A Review
Kanhar, A. H., Chen, S., & Wang, F. (2020) · Energies · doi:10.3390/en13246681 · Cited by 138 · cited 5×
“Figure 4 shows the Treatment techniques for incineration fly ash, to determine the effectiveness of obtaining environmentally stable content, and finally, to find potential applications for incineration fly ash based on determining the processing suitability, efficiency, and environmental impact of incineration fly as…”
MethodInfluentialZeyad, A. M., Johari, M. A. M., Alharbi, Y. R., Abadel, A. A., Amran, M., Tayeh, B. A., & Abutaleb, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102204 · Cited by 138
Self-citationIntegrating phase change materials into concrete through microencapsulation using cenospheres
Liu, F., Wang, J., & Qian, X. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.04.001 · Cited by 136
Formation mechanism and applications of cenospheres: a review
Danish, A., & Mosaberpanah, M. A. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04341-7 · Cited by 134 · cited 2×
“Main constituents of FA and their applications (modified with improvements from Danish [31]).”
BackgroundReview on fly ash-based geopolymer concrete without portland cement
Abdullah, M. M. A. B., Najm, . M., Kamarudin, H., Niza, I. K., & Yahya, Z. G. (2011) · Journal of Engineering and Technology · doi:10.5897/jetr.9000070 · Cited by 129 · cited 1×
“A group of researchers performed tests on AAM mortars and found that the maximum strength of FA-based AAM is achieved in the first two days of curing [114].”
Xie, J., & Kayali, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.067 · Cited by 128 · cited 1×
“Based on ASTM C 618, FA is categorized based on its chemical composition into two main classes: Class C and Class F [34,35].”
MethodKanadasan, J., & Razak, H. A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.002 · Cited by 121
Strengthening the palm oil biomass Renewable Energy industry in Malaysia
Umar, M. S., Jennings, P., & Urmee, T. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.04.010 · Cited by 120 · cited 10×
“Curing considerably influences the compressive strength of FA-based AAM by varying the density and porosity of the AAM [133].”
BackgroundInfluentialStrength and durability properties of alkali activated slag and fly ash-based geopolymer concrete
Adam, A. A. (2010) · RMIT Research Repository (RMIT University Library) · doi:10.25439/rmt.27351330 · Cited by 118
Sulfate resistance and carbonation of plain and blended cements
Sideris, K. K., Savva, A., & Papayianni, J. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2005.09.001 · Cited by 115 · cited 1×
“Furthermore, FAs as binders or fillers are usually dumped in landfill and open fields, creating health hazards and environmental pollution issues [16,271].”
BackgroundPozzolanic fly ash as a hydraulic barrier in land fills
Prashanth, J. P., Sivapullaiah, P. V., & Sridharan, A. (2001) · Engineering Geology · doi:10.1016/s0013-7952(00)00105-8 · Cited by 115
Immobilisation of lead smelting slag within spent aluminate—fly ash based geopolymers
Ogundiran, M. B., Nugteren, H. W., & Witkamp, G. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.12.040 · Cited by 115 · cited 1×
“Class F FA + blast furnace slag/K2SiO3/Al (85 g/L) + NaOH (30 g/L) 7 days/RT [235]”
Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash
Alsubari, B., Shafigh, P., Ibrahim, Z. B., Alnahhal, M. F., & Jumaat, M. Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.174 · Cited by 113 · cited 1×
“A larger concentration of NaOH could extend the time required for setting by restraining calcium leakage and permitting the normal geopolymerization method to govern the AAM paste setting [196].”
MethodA Critical Review on the Properties and Applications of Sulfur-Based Concrete
Федюк, Р. С., Amran, M., Mosaberpanah, M. A., Danish, A., El-Zeadani, M., Klyuev, S. V., & Vatin, N. I. (2020) · Materials · doi:10.3390/ma13214712 · Cited by 111 · cited 1×
“In sub-bituminous FAs, the crystalline stages may involve alkali and calcium sulfates [107].”
BackgroundSelf-citationEffects of alkali solutions on corrosion durability of geopolymer concrete
Shaikh, F. U. A. (2014) · Advances in concrete construction · doi:10.12989/acc.2014.2.2.109 · Cited by 110 · cited 1×
“The fibers for strengthening FA-based AAM composites include PVA fiber [247], steel fiber [2,248], sweet sorghum fiber [245], and cotton fiber [249,250].”
BackgroundMishra, D. P., & Das, S. K. (2010) · Materials Characterization · doi:10.1016/j.matchar.2010.08.008 · Cited by 109
Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete
Abutaha, F., Razak, H. A., & Kanadasan, J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.172 · Cited by 109
Synthesis of Zeolites from Coal Fly Ash for Removal of Harmful Gaseous Pollutants: A Review
Ren, X., Qu, R., Liu, S., Zhao, H., Wu, W., Song, H., Zheng, C., Wu, X., & Gao, X. (2020) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2019.12.0651 · Cited by 108 · cited 1×
“Researchers have identified key applications for FA in the future based on the yearly time series data by recognizing a pattern of development using regression analysis [274,275] and the amount of FA to be used in choice and specific applications have been predicted, as shown in Figure 17 [92,276].”
BackgroundThermal analysis and microstructure of Portland cement-fly ash-silica fume pastes
Chaipanich, A., & Nochaiya, T. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0403-y · Cited by 108 · cited 1×
“The addition of nano-silica (up to 3%) into FA-based paste results in an increase in the flowability since the spherical shape of nano-silica has a ball-bearing influence on FA particles [179].”
BackgroundUtilization of fly ashes from fluidized bed combustion: a review
Ohenoja, K., Pesonen, J., Yliniemi, J., & Illikainen, M. (2020) · Sustainability · doi:10.3390/su12072988 · Cited by 106 · cited 5×
“Besides, given a considerable volume of glassy material, each FA may include mullite, quartz, magnetite, and hematite (Figure 9) [103,104].”
BackgroundInfluentialEffect of curing condition on strength of geopolymer concrete
Patil, A. A., Chore, H. S., & Dodeb, P. A. (2014) · Advances in concrete construction · doi:10.12989/acc.2014.2.1.029 · Cited by 102 · cited 1×
“The AAM that is cured in the absence of high heat can be utilized in other areas beyond precast members [121].”
BackgroundHwang, J. P., Shim, H. B., Lim, S., & Ann, K. Y. (2013) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-013-1245-5 · Cited by 93 · cited 2×
“The hopper from where the FAs are collected affects their properties, and stockiest interviews showed that the cost of FAs had been already increased by 85– 100% in 2012–2016 due to less availability of FA [19].”
BackgroundCorrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid
Nasir, V., Karimipour, H., Taheri‐Behrooz, F., & Shokrieh, M. M. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.06.028 · Cited by 92
Chindaprasirt, P., & Rukzon, S. (2009) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2009)21:11(666 · Cited by 91 · cited 1×
“Mullite is mainly created through coal combustion by disintegrated clays, and its crystal composition is shaped in the cooling stage [104,106].”
BackgroundGoswami, R. K., & Mahanta, C. (2006) · Waste Management · doi:10.1016/j.wasman.2006.07.006 · Cited by 91
Anshits, N. N., Михайлова, О. А., Саланов, А. Н., & Anshits, A. G. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.049 · Cited by 91
Uptake and loss of water in a cenosphere–concrete composite material
Barbare, N., Shukla, A., & Bose, A. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00148-0 · Cited by 90
Alengaram, U. J., Mahmud, H. B., & Jumaat, M. Z. (2010) · The University of Malaya Research Repository (University of Malaya) · doi:10.5897/ijps.9000130 · Cited by 86
Utilization of Palm Oil Fuel Ash as Binder in Lightweight Oil Palm Shell Geopolymer Concrete
Liu, M. Y. J., Chua, C. P., Alengaram, U. J., & Jumaat, M. Z. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/610274 · Cited by 82 · cited 2×
“The color of FA can differ from tan to gray and to black, as shown in Figure 11, based on the chemical and mineral constituents and the quantity of unburned carbon in the ash [36,156,157].”
BackgroundMelwanki, M. B., & Fuh, M.-R. (2008) · Journal of Chromatography A · doi:10.1016/j.chroma.2008.05.007 · Cited by 81 · cited 1×
“Besides, the anhydrite content (limited to 10% in high-calcium FAs) is reasonably high because the coal that produces high-calcium FAs has high sulfur content [59].”
BackgroundLightweight aggregates produced by granulation of peat-wood fly ash with alkali activator
Yliniemi, J., Nugteren, H. W., Illikainen, M., Tiainen, M. S., Weststrate, R., & Niinimäki, J. (2016) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2016.02.006 · Cited by 81 · cited 1×
“FA’s pozzolanic property is also commonly motivated by forming an aluminosilicate gel between the particles of binder pastes [187,188].”
BackgroundLeong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.046 · Cited by 77 · cited 1×
“According to previous research findings, more than 188 mineral groups and 316 individual minerals are recognized in FAs [101,110], and the glass composition in high- and low-calcium FAs differ from each other.”
BackgroundPERFORMANCE OF SUSTAINABLE GREEN CONCRETE INCORPORATED WITH FLY ASH, RICE HUSK ASH, AND STONE DUST
Siddika, A., Amin, M. R., Khan, M. A. R., Islam, M. S., Mamun, M. A. A., Alyousef, R., & Amran, M. (2021) · Acta Polytechnica · doi:10.14311/ap.2021.61.0279 · Cited by 76
Self-citationAnalytical and experimental studies on composite slabs utilising palm oil clinker concrete
Mohammed, B. S., Al-Ganad, M. A., & Abdullahi, M. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.03.048 · Cited by 75 · cited 2×
“The fibers for strengthening FA-based AAM composites include PVA fiber [247], steel fiber [2,248], sweet sorghum fiber [245], and cotton fiber [249,250].”
BackgroundProduction of biosilica nanoparticles from biomass power plant fly ash
Liang, G., Li, Y., Yang, C., Zi, C., Zhang, Y., Hu, X., & Zhao, W. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.033 · Cited by 74 · cited 3×
“Diagram of clean production of FA (coal→ FA) [70].”
BackgroundInfluentialEvaluation of Mode II Fracture Toughness of Hybrid Fibrous Geopolymer Composites
Abid, S. R., Murali, G., Amran, M., Vatin, N. I., Федюк, Р. С., & Karelina, M. Y. (2021) · Materials · doi:10.3390/ma14020349 · Cited by 73 · cited 1×
“FAs with a higher amount of CaO produce a higher compressive strength, particularly in the early ages [40,224].”
BackgroundSelf-citationNasvi, M. C. M., Ranjith, P. G., Sanjayan, J., & Bui, H. H. (2013) · Fuel · doi:10.1016/j.fuel.2013.09.007 · Cited by 68 · cited 1×
“The geometric specific surface area can be calculated by Equation (1) assuming that particles are impeccably circle molded [128].”
BackgroundPerformance investigation of high-proportion Saudi-fly-ash-based concrete
Amran, M., Soto, M. G., Alyousef, R., El-Zeadani, M., Alabduljabbar, H., & Aune, V. (2020) · Results in Engineering · doi:10.1016/j.rineng.2020.100118 · Cited by 65 · cited 2×
“Figure 14 shows the relationship between elastic modulus of Saudi FA (SFA)-based concrete with time [41].”
BackgroundSelf-citationIbrahim, M., Johari, M. A. M., Maslehuddin, M., Rahman, M. K., Salami, B. A., & Mohamed, H. D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.117 · Cited by 65 · cited 2×
“According to previous research findings, more than 188 mineral groups and 316 individual minerals are recognized in FAs [101,110], and the glass composition in high- and low-calcium FAs differ from each other.”
BackgroundImprovement of Performances of the Gypsum-Cement Fiber Reinforced Composite (GCFRC)
Чернышева, Н. В., Lesovik, V. S., Федюк, Р. С., & Vatin, N. I. (2020) · Materials · doi:10.3390/ma13173847 · Cited by 63 · cited 1×
“As FA initially reacts with liquid at a reasonably slow rate, the compressive strength of the concrete at the first few days after mixing is low; however, high strength is developed at the longer ages [218,219].”
BackgroundSelf-citationEffect of Mixing Constituent toward Engineering Properties of POFA Cement-Based Aerated Concrete
Hussin, M. W., Muthusamy, K., & Zakaria, F. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2010)22:4(287 · Cited by 63 · cited 1×
“Foundation 25 100:0 0·52 21 Cube: 66·5 [222]”
Utilization of chitosan biopolymer to enhance fly ash-based geopolymer
Li, Z., Chen, R., & Zhang, L. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7610-4 · Cited by 62
Alsubari, B., Shafigh, P., Ibrahim, Z. B., & Jumaat, M. Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.134 · Cited by 62 · cited 2×
“The combination of NaOH with Na2SiO3 and KOH with potassium silicate (K2SiO3) as alkaline liquids has been studied in previous research [118].”
BackgroundResultBuilding Materials Capillary Rise Coefficient: Concepts, Determination and Parameters Involved
Karagiannis, N., Καρόγλου, Μ., Bakolas, A., & Moropoulou, A. I. (2016) · Building pathology and rehabilitation · doi:10.1007/978-981-10-0648-7_2 · Cited by 59
Performance of slag blended alkaline activated palm oil fuel ash mortar in sulfate environments
Yusuf, M. O. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.012 · Cited by 56
Rukzon, S., & Chindaprasirt, P. (2009) · Indoor and Built Environment · doi:10.1177/1420326x09336554 · Cited by 50 · cited 1×
“Based on ASTM C 618, FA is categorized based on its chemical composition into two main classes: Class C and Class F [34,35].”
MethodCzuma, N., Casanova, I., Baran, P., Szczurowski, J., & Zarębska, K. (2020) · Scientific Reports · doi:10.1038/s41598-020-58591-6 · Cited by 50 · cited 2×
“About 80% of the total ash leaves, as FA, is available in the exhaust fume when crushed coal is burnt at a dry-bottom boiler [73].”
BackgroundINTRODUCING FLY ASH-BASED GEOPOLYMER CONCRETE: MANUFACTURE AND ENGINEERING PROPERTIES
Hardjito, D., & Sumajouw, D. M. J. (2005) · Cited by 50
Optimization of fresh properties and durability of the green gypsum-cement paste
Lesovik, V. S., Чернышева, Н. В., Федюк, Р. С., Amran, M., Murali, G., & de Azevedo, A. R. G. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123035 · Cited by 46
Self-citationRukzon, S., & Chindaprasirt, P. (2009) · International Journal of Minerals Metallurgy and Materials · doi:10.1016/s1674-4799(09)60083-2 · Cited by 44 · cited 1×
“However, as a result of mineral variable sources and processes, mineral admixtures differ considerably in chemical compositions and when added to cement [79].”
BackgroundBouasria, M., Khadraoui, F., Benzaama, M.-H., Touati, K., Chateigner, D., Gascoin, S., Pralong, V., Orberger, B., Babouri, L., & Mendili, Y. E. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101587 · Cited by 43
Frost Resistance of Alkali-Activated Concrete—An Important Pillar of Their Sustainability
Bílek, V., Sucharda, O., & Bujdoš, D. (2021) · Sustainability · doi:10.3390/su13020473 · Cited by 43
Plain and Ultrafine Fly Ashes Mortars for Environmentally Friendly Construction Materials
Coppola, L., Coffetti, D., & Crotti, E. (2018) · Sustainability · doi:10.3390/su10030874 · Cited by 43 · cited 1×
“Fine FAs improve mortar workability through improved packing, and reduced water demand caused by the ash particle spherical shape [77,78,148].”
BackgroundMunicipal waste incineration fly ashes: from a multi-element approach to market potential evaluation
Fabricius, A.-L., Renner, M., Voss, M., Funk, M. A., Perfoll, A., Gehring, F., Graf, R., Fromm, S., & Duester, L. (2020) · Environmental Sciences Europe · doi:10.1186/s12302-020-00365-y · Cited by 42 · cited 1×
“FA materials harden when they are still suspended in exhaust gases and are produced by filter bags or electrostatic precipitators [81].”
BackgroundEffective methodology of sustainability assessment of concrete mixtures
Konečný, P., Ghosh, P., Hrabová, K., Lehner, P., & Teplý, B. (2020) · Materials and Structures · doi:10.1617/s11527-020-01535-3 · Cited by 39 · cited 1×
“FA’s pozzolanic property is also commonly motivated by forming an aluminosilicate gel between the particles of binder pastes [187,188].”
BackgroundEffect of High-Speed Mixing on Properties of High Calcium Fly Ash Geopolymer Paste
Chindaprasirt, P., Silva, P. D., & Hanjitsuwan, S. (2014) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-014-1217-1 · Cited by 36 · cited 2×
“Furthermore, a low-calcium FA comprises nearly 3–24% mullite [57,105,109].”
BackgroundEnhancing performances of clay masonry materials based on nanosize mine waste
Lesovik, V. S., Володченко, А. А., Федюк, Р. С., Amran, M., & Андреевич, Т. Р. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121333 · Cited by 35
Self-citationFlyash Based Geopolymer Concrete – A State of t he Art Review
Saravanan, G., Jeyasehar, C. A., & Kandasamy, S. (2013) · Journal of Engineering Science and Technology Review · doi:10.25103/jestr.061.06 · Cited by 34
Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes
Jun, Y., & Oh, J. E. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.058 · Cited by 27
Enhancement of fresh properties and performances of the eco-friendly gypsum-cement composite (EGCC)
Chernyshova, N., Lesovik, V. S., Федюк, Р. С., & Андреевич, Т. Р. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120462 · Cited by 25 · cited 1×
“Furthermore, replacing at least 50% of cement with FA results in decreased workability [108,193].”
BackgroundApplicability of Fly Ash from Fluidized Bed Combustion of Peat, Wood, or Wastes to Concrete
Ohenoja, K., Wigren, V., Österbacka, J., & Illikainen, M. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0319-5 · Cited by 20
Suitability of Malaysian Fly Ash for Geopolymer Synthesis
Siyal, A. A., Azizli, K. A., Ismail, L. B., Man, Z. B., & Khan, M. I. (2015) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1133.201 · Cited by 17
Influence of sodium chloride on leaching behavior of fly ash stabilized with carbide lime
Saldanha, R. B., Reddy, K. R., & Consoli, N. C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.297 · Cited by 17
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Self-citationKakasor Ismael Jaf, D., Ismael Abdulrahman, P., Salih Mohammed, A., Kurda, R., Qaidi, S. M. A., & Asteris, P. G. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132604 · Cited by 311
Metadata
- Authors
- Amran, M., Fediuk, R., Murali, G., Avudaiappan, S., Ozbakkaloglu, T., Vatin, N., Karelina, M., Klyuev, S., & Gholampour, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-07-30
- Volume
- 14
- Issue
- 15
- Pages
- 4264
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3188173583
- Cited by
- 165
- References
- 142
- FWCI
- 15.44
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.