Cause and Mitigation of Lithium-Ion Battery Failure—A Review
Open accessThe DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Lithium-ion batteries (LiBs) are seen as a viable option to meet the rising demand for energy storage. To meet this requirement, substantial research is being accomplished in battery materials as well as operational safety. LiBs are delicate and may fail if not handled properly. The failure modes and mechanisms for any system can be derived using different methodologies like failure mode effects analysis (FMEA) and failure mode methods effects analysis (FMMEA). FMMEA is used in this paper as it helps to identify the reliability of a system at the component level focusing on the physics causing the observed failures and should thus be superior to the more data-driven FMEA approach. Mitigation strategies in LiBs to overcome the failure modes can be categorized as intrinsic safety, additional protection devices, and fire inhibition and ventilation. Intrinsic safety involves modifications of materials in anode, cathode, and electrolyte. Additives added to the electrolyte enhance the properties assisting in the improvement of solid-electrolyte interphase and stability. Protection devices include vents, circuit breakers, fuses, current interrupt devices, and positive temperature coefficient devices. Battery thermal management is also a protection method to maintain the temperature below the threshold level, it includes air, liquid, and phase change material-based cooling. Fire identification at the preliminary stage and introducing fire suppressive additives is very critical. This review paper provides a brief overview of advancements in battery chemistries, relevant modes, methods, and mechanisms of potential failures, and finally the required mitigation strategies to overcome these failures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Hannan, M. A., Lipu, M. S. H., Hussain, A., & Mohamed, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.001 · Cited by 2,005
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
Hendricks, C., Williard, N., Mathew, S., & Pecht, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.100 · Cited by 381
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
The role of mechanically induced separator creep in lithium-ion battery capacity fade
Peabody, C., & Arnold, C. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.023 · Cited by 237
Cited by
Geometry-influenced cooling performance of lithium-ion battery
Dubey, D., Mishra, A., Ghosh, S., Reddy, M. V., & Pandey, R. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120723 · Cited by 25
“This charge/discharge process and associated parameter such as heat generation have severe impact in the specific energy, specific power, and durability of the battery [10].”
BackgroundSelf-citationBinpeng, Z., Yang, Z., Jie, G., Yan, L., Liangcai, C., & Cunfu, H. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236469 · Cited by 12
Akhter, R., Palli, S. R., Walanjuwani, M., & Jones, E. C. (2026) · Commodities · doi:10.3390/commodities5010002 · Cited by 5
“Using copper on the cathode is avoided because Cu oxidizes above about 3.5 V, degrading performance; thus, Al is mandatory on the cathode side [15].”
Influential
Metadata
- Authors
- Kaliaperumal, M., Dharanendrakumar, M. S., Prasanna, S., Abhishek, K. V., Chidambaram, R. K., Adams, S., Zaghib, K., & Reddy, M. V.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-09-29
- Volume
- 14
- Issue
- 19
- Pages
- 5676
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3204700411
- Cited by
- 153
- References
- 14
- FWCI
- 4.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cause and Mitigation of Lithium-Ion Battery Failure—A Review. https://app.cochat.ai/papers/10.3390/ma14195676
- The paper
- Kaliaperumal, M., Dharanendrakumar, M. S., Prasanna, S., Abhishek, K. V., Chidambaram, R. K., Adams, S., Zaghib, K., & Reddy, M. V. (2021). Cause and Mitigation of Lithium-Ion Battery Failure—A Review. Materials. https://doi.org/10.3390/ma14195676
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.