The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Properties Characterization of Chemically Modified Hemp Hurds
Open accessAbstract
The effect of chemical treatment of hemp hurds slices in three solutions (EDTA (Ethylenediaminetetraacetic acid), NaOH and Ca(OH)2) on the properties of natural material was discussed in this paper. Changes in the morphology, chemical composition and structure as well as thermal stability of hemp hurds before and after their modification were investigated by using FTIR (Fourier transform infrared spectroscopy), XRD (X-ray powder diffraction analysis) and TG (thermogravimetry)/DSC (differential scanning calorimetry). Size exclusion chromatography (SEC) measurements were used for determination of degree of cellulose polymerization of hemp hurd samples. Chemical modification is related to the partial removal of non-cellulosic components of lignin, hemicellulose and pectin as well as waxes from the surface of hemp hurd slices. Another effect of the chemical treatment applied is connected with increasing the crystallinity index of cellulose determined by FTIR and XRD methods. Decrease in degree of cellulose polymerization and polydispersity index in chemically modified hemp hurds compared to the original sample was observed. Increase in thermal stability of treated hemp hurd was found. The most significant changes were observed in alkaline treated hemp hurds by NaOH.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Determination of Structural Carbohydrates and Lignin in Biomass
Sluiter, A. D., Hames, B. R., Ruiz, R. O., Scarlata, C. J., Sluiter, J. B., Templeton, D. W., & Crocker, D. P. (2012) · Cited by 5,261
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Bakis, C. E., Bank, L. C., Brown, V. L., Cosenza, E., Davalos, J. F., Lesko, J. J., Machida, A., Rizkalla, S. H., & Triantafillou, T. C. (2002) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2002)6:2(73 · Cited by 1,807
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
On the determination of crystallinity and cellulose content in plant fibres
Thygesen, A., Oddershede, J., Lilholt, H., Thomsen, A. B., & Ståhl, K. (2005) · Cellulose · doi:10.1007/s10570-005-9001-8 · Cited by 774
Wise, L. E., Murphy, M. L., & Adieco, A. A. D. (1946) · Cited by 772
Influence of various chemical treatments on the composition and structure of hemp fibres
Troëdec, M. L., Sedan, D., Peyratout, C. S., Bonnet, J. P., Smith, A., Guinebretière, R., Gloaguen, V., & Krausz, P. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.001 · Cited by 700
Composition, structure and thermal degradation of hemp cellulose after chemical treatments
Ouajai, S., & Shanks, R. A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.016 · Cited by 601
Fourier Transform Infrared Spectroscopy for Natural Fibres
Fan, M., Dai, D., & Huang, B. (2012) · Fourier Transform - Materials Analysis · doi:10.5772/35482 · Cited by 555
The hygroscopic behavior of plant fibers: a review
Célino, A., Fréour, S., Jacquemin, F., & Casari, P. (2014) · Frontiers in Chemistry · doi:10.3389/fchem.2013.00043 · Cited by 461
Elfordy, S., Lucas, F., Tancret, F., Scudeller, Y., & Goudet, L. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.016 · Cited by 419
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.03.008 · Cited by 405
Mwaikambo, L. Y., & Ansell, M. P. (1999) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19991201)272:1<108::aid-apmc108>3.0.co;2-9 · Cited by 313
Monitoring Wood Degradation during Weathering by Cellulose Crystallinity
Lionetto, F., Del Sole, R., Cannoletta, D., Vasapollo, G., & Maffezzoli, A. (2012) · Materials · doi:10.3390/ma5101910 · Cited by 305
The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers
Pejic, B. M., Kostic, M. M., Skundric, P. D., & Praskalo, J. Z. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.12.073 · Cited by 287
Agrawal, R., Saxena, N. S., Sharma, K. B., Thomas, S., & Sreekala, M. S. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00556-0 · Cited by 285
Fourier Transform - Materials Analysis
Salih, S. M. (2012) · InTech eBooks · doi:10.5772/2659 · Cited by 239
Fracture and fatigue of natural fiber-reinforced cementitious composites
Savastano, H., Santos, S. F., Radonjic, M., & Soboyejo, W. O. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.006 · Cited by 230
Quality of chemically modified hemp fibers.
Kostic, M., Pejic, B., & Skundric, P. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2006.11.050 · Cited by 217 · cited 1×
“It corresponds to literature [36,37], according to which lignin cannot be totally removed by the alkaline process.”
BackgroundLu, N., & Oza, S. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.03.024 · Cited by 183
Removing Pectin and Lignin During Chemical Processing of Hemp for Textile Applications
Wang, H. M., Postle, R., Kessler, R. W., & Kessler, W. (2003) · Textile Research Journal · doi:10.1177/004051750307300802 · Cited by 170
Angelini, L. G., Lazzeri, A., Levita, G., Fontanelli, D., & Bozzi, C. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00059-x · Cited by 150
Chemical Modification of Hemp Shives and their Characterization
Terpáková, E., Kidalova, L., Eštoková, A., Cigasova, J., & Števulová, N. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.486 · Cited by 124
Self-citationInfluence of various chemical treatments on the interactions between hemp fibres and a lime matrix
Troëdec, M. L., Peyratout, C. S., Smith, A., & Chotard, T. J. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.11.016 · Cited by 123
Thomsen, A. B., Thygesen, A., Bohn, V., Nielsen, K. V., Pallesen, B. E., & Jørgensen, M. S. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.10.003 · Cited by 108
Utilization of alternative materials in lightweight composites
Kidalova, L., Števulová, N., Terpáková, E., & Sičáková, A. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.01.031 · Cited by 101
Influence of chemical treatments on adhesion properties of hemp fibres
Troëdec, M. L., Rachini, A., Peyratout, C. S., Rossignol, S., Max, E., Kaftan, Ö., Fery, A., & Smith, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.12.066 · Cited by 99
Temporal changes in wood crystalline cellulose during degradation by brown rot fungi
Howell, C., Hastrup, A. C. S., Goodell, B. S., & Jellison, J. (2009) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2008.11.009 · Cited by 90
Gümüşkaya, E., Usta, M., & Balaban, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2006.02.031 · Cited by 87
Fibrillation tendency of cellulosic fibers?part 3. Effects of alkali pretreatment of lyocell fiber
Zhang, W., Okubayashi, S., & Bechtold, T. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.09.007 · Cited by 67
Lightweight Composites Based on Rapidly Renewable Natural Resource
Števulová, N., Cigasova, J., Sicakova, A., & Junák, J. (2013) · Chemical engineering transactions · doi:10.3303/cet1335098 · Cited by 17
Self-citation
Cited by
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Chemistry and Specialty Industrial Applications of Lignocellulosic Biomass
Okolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01123-0 · Cited by 415
Crini, G., Lichtfouse, E., Chanet, G., & Morin-Crini, N. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01029-2 · Cited by 396
Adesina, I., Bhowmik, A., Sharma, H., & Shahbazi, A. (2020) · Agriculture · doi:10.3390/agriculture10040129 · Cited by 324
Hemp-derived activated carbons for supercapacitors
Sun, W., Lipka, S. M., Swartz, C., Williams, D., & Yang, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.090 · Cited by 277
Metadata
- Authors
- Stevulova, N., Cigasova, J., Estokova, A., Terpakova, E., Geffert, A., Kacik, F., Singovszka, E., & Holub, M.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2014-12-17
- Volume
- 7
- Issue
- 12
- Pages
- 8131-8150
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2015489691
- Cited by
- 258
- References
- 32
- FWCI
- 6.21
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.