The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering
Open accessAbstract
Scaffolds are physical substrates for cell attachment, proliferation, and differentiation, ultimately leading to the regeneration of tissues. They must be designed according to specific biomechanical requirements, i.e., certain standards in terms of mechanical properties, surface characteristics, porosity, degradability, and biocompatibility. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes, as well as surface treatment. Polymeric scaffolds reinforced with electro-active particles could play a key role in tissue engineering by modulating cell proliferation and differentiation. This paper investigates the use of an extrusion-based additive manufacturing system to produce poly(ε-caprolactone) (PCL)/pristine graphene scaffolds for bone tissue applications and the influence of chemical surface modification on their biological behaviour. Scaffolds with the same architecture but different concentrations of pristine graphene were evaluated from surface property and biological points of view. Results show that the addition of pristine graphene had a positive impact on cell viability and proliferation, and that surface modification leads to improved cell response.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,406
Synthesis of Water Soluble Graphene
Si, Y., & Samulski, E. T. (2008) · Nano Letters · doi:10.1021/nl080604h · Cited by 2,722
Cytotoxicity of Graphene Oxide and Graphene in Human Erythrocytes and Skin Fibroblasts
Liao, K.-H., Lin, Y.-S., Macosko, C. W., & Haynes, C. L. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200428v · Cited by 1,370
Solution Properties of Graphite and Graphene
Niyogi, S., Bekyarova, E., Itkis, M. E., McWilliams, J. L., Hamon, M. A., & Haddon, R. C. (2006) · Journal of the American Chemical Society · doi:10.1021/ja060680r · Cited by 1,292
Zhang, Y., Ali, S. F., Dervishi, E., Xu, Y., Li, Z., Casciano, D., & Biris, A. S. (2010) · ACS Nano · doi:10.1021/nn1007176 · Cited by 1,155
Biocompatibility of Graphene Oxide
Wang, K., Ruan, J., Song, H., Zhang, J., Wo, Y., Guo, S., & Cui, D. (2010) · Nanoscale Research Letters · doi:10.1007/s11671-010-9751-6 · Cited by 1,061
Origin of Enhanced Stem Cell Growth and Differentiation on Graphene and Graphene Oxide
Lee, W. C., Lim, C. H. Y. X., Shi, H., Tang, L. A. L., Wang, Y., Lim, C. T., & Loh, K. P. (2011) · ACS Nano · doi:10.1021/nn202190c · Cited by 1,044
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Graphene: Exploring carbon flatland
Geim, A. K., & MacDonald, A. H. (2007) · Physics Today · doi:10.1063/1.2774096 · Cited by 860
Enhanced Differentiation of Human Neural Stem Cells into Neurons on Graphene
Park, S. Y., Park, J., Sim, S. H., Sung, M. G., Kim, K. S., Hong, B. H., & Hong, S. (2011) · Advanced Materials · doi:10.1002/adma.201101503 · Cited by 703
Cited by
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
Graphene Nanoplatelets-Based Advanced Materials and Recent Progress in Sustainable Applications
Cataldi, P., Athanassiou, A., & Bayer, I. S. (2018) · Applied Sciences · doi:10.3390/app8091438 · Cited by 352
Metadata
- Authors
- Wang, W., Caetano, G., Ambler, W., Blaker, J., Frade, M., Mandal, P., Diver, C., & Bártolo, P.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-12-07
- Volume
- 9
- Issue
- 12
- Pages
- 992
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2559983959
- Cited by
- 330
- References
- 34
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering. https://app.cochat.ai/papers/10.3390/ma9120992
- The paper
- Wang, W., Caetano, G., Ambler, W., Blaker, J., Frade, M., Mandal, P., Diver, C., & Bártolo, P. (2016). Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering. Materials. https://doi.org/10.3390/ma9120992
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.