Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review
Open accessThe DOI matches its Crossref record; 190 of the 192 references it cites were found in a registry or an index; 26 of the 228 sources its claims cite were checked for support.
Abstract
Theoretical models used to describe the proton-conductive membrane in polymer electrolyte membrane fuel cells (PEMFCs) are reviewed, including proton conductivity, water sorption, diffusion, electroosmotic drag, swelling, gas transport, and degradation parameterization.
Overview
CoChat Summary
TL;DR
This review synthesizes 30 years of membrane-transport modelling for low-temperature PEMFC simulation, focusing on macroscopically observable charge, water, heat, gas, and degradation phenomena. It argues that coupled proton–water transport models, especially the Springer and Weber–Newman frameworks, are the dominant practical choices, but that their parameterisation is still heavily reliant on older Nafion data.
Key findings
- The review finds that a simple Ohm’s-law membrane model is only adequate under uniform hydration; most spatially resolved PEMFC simulations need coupled proton–water transport because membrane conductivity depends strongly on water content and water flux is tied to electroosmotic drag.
- It identifies the Springer and Weber–Newman models as the most widely used coupled transport approaches, with the Weber–Newman framework separating vapour-equilibrated (VE) and liquid-equilibrated (LE) conditions and allowing different transport coefficients in each regime.
- The authors report that many recent simulations still rely on 1990s parameterisation: in a sampled set of 8 PEMFC simulations published since 2019, 6 used the Springer model and 2 used the Weber–Newman model; the Springer-based works drew exclusively on four experimental studies from 1998 or earlier on Nafion 117.
- The paper notes several quantitative values from the literature, including Nafion 1100 MEW ≈ 1.100 kg mol−1, dry density ρdry ≈ 2050 kg m−3, and an experimental interfacial proton resistance of at least 8 mΩ cm2 for a directly painted Nafion-based MEA.
Methods
- Narrative review of theoretical and empirical membrane-transport models for PEMFC simulation, with emphasis on practical continuum-scale device modelling rather than atomic-scale chemistry.
- Compiles and standardizes reported equations and parameterisations, especially for Nafion 1100, across transport topics including proton conductivity, sorption isotherms, water diffusivity, electroosmotic drag, interfacial resistances, hydraulic flow, thermal effects, gas crossover, contamination, and degradation.
- Uses literature comparison and qualitative appraisal; the paper also presents a sampled review of 8 recent 2D/3D PEMFC simulation papers to illustrate dependence on legacy parameter sets.
Limitations
- Stated in the paper: the review is explicitly not comprehensive for the broader proton-conductive membrane literature, not focused on atomic-scale structure, and does not cover cold-start freezing or high-temperature PEM devices; it also excludes a detailed discussion of ionomer morphology in catalyst layers.
- Stated in the paper: detailed discussion of model validation is beyond scope, and the authors note that many current models depend on outdated material parameterisation rather than state-of-the-art membranes.
- Evident from the text: the review is heavily centered on Nafion-family/PFSA membranes, so transferability to other chemistries is only discussed cautiously and not exhaustively.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures








![Figure 9 Permeation coefficients for H2 and O2 as a function of temperature, using data summarised by Weber and Newman [65].](https://figures.cochat.ai/paper-figures/05084ed56c6c40f3a001cea2ab83cd81/modelling-the-proton-conductive-membrane-in-practical-polymer-electrolyte-figure-9.jpg)
![Figure 10 Henry’s law coefficients for H2 and O2 as a function of temperature, using data summarised by Wong and Kjeang [137].](https://figures.cochat.ai/paper-figures/1e3cab47d93c40409fa5cca1bd9434fe/modelling-the-proton-conductive-membrane-in-practical-polymer-electrolyte-figure-10.jpg)
Verification
Claims the paper makes
21 Valid · 10 Not valid · 134 Not checked · 70 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“A number of empirical sorption isotherms have been established experimentally based on measurements on Nafion 1100 [39,51,52,53,54].”
§ Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review > 4. Sorption of Water > 4.2. Empirical Sorption Models for Nafion 1100
What the sources say
- Partly supportedcites [39] Springer T.E. Zawodzinski T.A. Gottesfeld S. Polymer Electrolyte Fuel Cell Model J. Electrochem. Soc. 1991 138 2334 2342 10.1149/1.2085971 sourceExperimental — accuracy not yet measured
The Mathematical Model section (page unavailable) reports an experimentally measured isopiestic curve and an empirical fit relating water content to water activity for Nafion 117. It supports the existence of an experimentally based sorption relationship, but does not establish that this paper presents a number of isotherms or identify the measured membrane as “Nafion 1100.” (LLM, conf=0.83)
- Could not verifycites [51] Springer T.E. Wilson M.S. Gottesfeld S. Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells J. Electrochem. Soc. 1993 140 3513 3526 10.1149/1.2221120 sourceExperimental — accuracy not yet measured
Our copy of Springer et al. (1993) is a cathode-focused modeling and diagnostics paper: the closest membrane material is the Abstract/introduction statement that earlier work 'focused on the losses in the ionomeric membrane, which we calculated for PEFC membranes of well-characterized transport properties' and the conductivity measurements on silica/recast-Nafion composites ('Calculated effects of permeability and conductivity limitations'). No passage reports or discusses empirical water sorption isotherms, and no passage mentions Nafion 1100 (searched: 'sorption isotherm Nafion 1100 water uptake', 'membrane water sorption relative humidity lambda', 'equilibrium water content versus activity isotherm'). Nothing in our copy contradicts the claim either, so the cited five references cannot be checked against this source. (LLM, conf=0.70)
- Partly supportedcites [52] Zawodzinski T.A. Derouin C. Radzinski S. Sherman R.J. Smith V.T. Springer T.E. Gottesfeld S. Water Uptake by and Transport Through Nafion® 117 Membranes J. Electrochem. Soc. 1993 140 1041 1047 10.1149/1.2056194 sourceExperimental — accuracy not yet measured
The Experimental section describes measuring water sorption, and Results and Discussion presents an isopiestic sorption curve for Nafion 117 at 30°C. This supports the paper as one source of experimental sorption data, but our copy does not identify the membrane as “Nafion 1100” or establish multiple isotherms in this paper. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [53] Zawodzinski T.A. Springer T.E. Uribe F. Gottesfeld S. Characterization of polymer electrolytes for fuel cell applications Solid State Ion. 1993 60 199 211 10.1016/0167-2738(93)90295-E source
- Not checked — no full text of the sourcecites [54] Broka K. Ekdunge P. Modelling the PEM fuel cell cathode J. Appl. Electrochem. 1997 27 281 289 10.1023/A:1018476612810 source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The most commonly used sorption isotherm is an empirical polynomial relation due to Springer et al. [39]:”
§ Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review > 4. Sorption of Water > 4.2. Empirical Sorption Models for Nafion 1100
What the sources say
- Partly supportedcites [39] Springer T.E. Zawodzinski T.A. Gottesfeld S. Polymer Electrolyte Fuel Cell Model J. Electrochem. Soc. 1991 138 2334 2342 10.1149/1.2085971 sourceExperimental — accuracy not yet measured
The Mathematical Model section (page not available) gives an empirical polynomial relating membrane water content to water activity, supporting the attribution of that relation to Springer et al. Our copy does not establish that it is the most commonly used sorption isotherm. (LLM, conf=0.88)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“From a thermodynamic standpoint, the inclusion of pressure as a local variable, in addition to electrolyte potential and water content, is almost certainly an overdetermination of the system except for the liquid-equilibrated case; it has not found general support [65,78].”
§ Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review > 5. Coupled Proton-Water Transport
What the sources say
- Supportedcites [65] Weber A.Z. Newman J. Transport in polymer-electrolyte membranes—II. Mathematical model J. Electrochem. Soc. 2004 151 A311 A325 10.1149/1.1639157 source
In the Mathematical Model section (page unavailable), the paper says that treating pressure as a separate driving force in a vapor-equilibrated membrane adds a variable and requires another equation or assumption; it calls common treatments nonrigorous and potentially arbitrary. It distinguishes the liquid-equilibrated case, where the chemical-potential driving force can be expressed in terms of pressure alone. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [78] Fimrite J. Carnes B. Struchtrup H. Djilali N. Coupled Proton and Water Transport in Polymer Electrolyte Membranes Device and Materials Modeling in PEM Fuel Cells Paddison S.J. Promislow K.S. Springer New York, NY, USA 2009 123 155 source
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“From a thermodynamic standpoint, the inclusion of pressure as a local variable, in addition to electrolyte potential and water content, is almost certainly an overdetermination of the system except for the liquid-equilibrated case; it has not found general support [65,78].”
§ Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review > 5. Coupled Proton-Water Transport
What the sources say
- Partly supportedcites [65] Weber A.Z. Newman J. Transport in polymer-electrolyte membranes—II. Mathematical model J. Electrochem. Soc. 2004 151 A311 A325 10.1149/1.1639157 sourceExperimental — accuracy not yet measured
The Mathematical Model section says that separating chemical potential into activity and pressure in a vapor-equilibrated membrane introduces another variable and requires an additional equation or assumption; it also says the common treatments are not rigorous. It distinguishes the liquid-equilibrated case, where pressure can be the driving force. It does not say that including pressure overdetermines a system specified by electrolyte potential and water content, or establish the broader claim that the approach has not found general support. Page numbers are unavailable in our copy. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [78] Fimrite J. Carnes B. Struchtrup H. Djilali N. Coupled Proton and Water Transport in Polymer Electrolyte Membranes Device and Materials Modeling in PEM Fuel Cells Paddison S.J. Promislow K.S. Springer New York, NY, USA 2009 123 155 source
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Weber and Newman have advocated the interpretation of the hydrated membrane as a system with three chemical components: water, protons, and fixed membrane structure [65].”
§ Modelling the Proton-Conductive Membrane in Practical Polymer Electrolyte Membrane Fuel Cell (PEMFC) Simulation: A Review > 5. Coupled Proton-Water Transport
What the sources say
- Supportedcites [65] Weber A.Z. Newman J. Transport in polymer-electrolyte membranes—II. Mathematical model J. Electrochem. Soc. 2004 151 A311 A325 10.1149/1.1639157 source
The Mathematical Model section describes a concentrated-solution system composed of water, proton, and membrane. It also identifies the membrane as stationary, matching the claim’s fixed membrane structure. Page numbers are not provided in our copy. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
97 more claims · 11 with their cited sources checked
Create a free account to see all 235 claims and to verify the 63 references still open.
- It may state two separate claims as one. 78
- Probably not a substantial claim. 84
Citations
Cites
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Review of the proton exchange membranes for fuel cell applications
Peighambardoust, S. J., Rowshanzamir, S., & Amjadi, M. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.05.017 · Cited by 2,186
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051 · cited 1×
“The hydroxide-conducting membranes used in anion exchange membrane fuel cells feature significantly different transport mechanisms [28] and so any adaptation of the models described here to these materials must be made with great caution.”
BackgroundWater Uptake by and Transport Through Nafion® 117 Membranes
Zawodzinski, T. A., Derouin, C., Radzinski, S., Sherman, R. J., Smith, V. T., Springer, T. E., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2056194 · Cited by 1,530
A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell
Bernardi, D. M., & Verbrugge, M. W. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221251 · Cited by 1,368
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
Solid polymer electrolyte membranes for fuel cell applications—a review
Smitha, B., Sridhar, S., & Khan, A. A. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.01.035 · Cited by 1,216
A Water and Heat Management Model for Proton‐Exchange‐Membrane Fuel Cells
Nguyen, T. V., & White, R. E. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220792 · Cited by 1,134
Research works printed but not linked: 3
- The Chemours Company FC, LLC. Product Bulletin P-11: Nafion(TM) NR211 and NR212 Ion Exchange Materials: Solution Cast Membranes The Chemours Company FC, LLC. Wilmington, DE, USA 2017
- The Chemours Company FC, LLC. Product Bulletin P-12: Nafion(TM) N115, N117 and N1110 Ion Exchange Materials: Extrusion Cast Membranes The Chemours Company FC, LLC. Wilmington, DE, USA 2016
- Weber A.Z. Newman J. A Combination Model for Macroscopic Transport in Polymer-Electrolyte Membranes Device and Materials Modeling in PEM Fuel Cells Paddison S.J. Promislow K.S. Springer New York, NY, USA 2009 157 198 · DOI · Paper page
Cited by
A review on lifetime prediction of proton exchange membrane fuel cells system
Hua, Z., Zheng, Z., Pahon, E., Péra, M.-C., & Gao, F. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231256 · Cited by 289
Application of Machine Learning in Optimizing Proton Exchange Membrane Fuel Cells: A Review
Ding, R., Zhang, S., Chen, Y., Rui, Z., Hua, K., Wu, Y., Li, X., Duan, X., Wang, X., Li, J., et al. (2022) · Energy and AI · doi:10.1016/j.egyai.2022.100170 · Cited by 171
Yang, L., Nik-Ghazali, N.-N., Ali, M. A. H., Chong, W. T., Yang, Z., & Liu, H. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113737 · Cited by 168
A survey of Digital Twin techniques in smart manufacturing and management of energy applications
Wang, Y., Kang, X., & Chen, Z. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100014 · Cited by 147
Pan, Y., Wang, H., & Brandon, N. P. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230560 · Cited by 129
Technological Pathways to Produce Compressed and Highly Pure Hydrogen from Solar Power
Ivanova, M., Peters, R., Müller, M. J., Haas, S., Seidler, M. F., Mutschke, G., Eckert, K., Röse, P., Calnan, S., Bagacki, R., et al. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202218850 · Cited by 81
Metal–organic frameworks as proton conductors: strategies for improved proton conductivity
Biradha, K., Goswami, A., Moi, R., & Saha, S. (2021) · Dalton Transactions · doi:10.1039/d1dt01116b · Cited by 70
Nóbrega, P. A. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232585 · Cited by 64
A Molecular Model of PEMFC Catalyst Layer: Simulation on Reactant Transport and Thermal Conduction
Wang, W., Qu, Z., Wang, X., & Zhang, J. (2021) · Membranes · doi:10.3390/membranes11020148 · Cited by 54
Schroeder's paradox in proton exchange membrane fuel cells: A review
Chen, L., Chen, Y., & Tao, W.-Q. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.113050 · Cited by 49
Mareev, S. A., Gorobchenko, A., Ivanov, D. A., Anokhin, D. V., & Nikonenko, V. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms24010034 · Cited by 51
Strategies to optimize water management in anion exchange membrane fuel cells
Zhang, B., Hua, Y., & Gao, Z. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231141 · Cited by 45
Gao, W. G., Li, Q., Sun, K., Chen, R., Che, Z., & Wang, T. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124595 · Cited by 47
Fuel cell system for aviation applications: Modeling, parameter sensitivity, and control
Zhang, Y., Hu, Z., Xu, L., Liu, H., Ye, K., Li, J., & Ouyang, M. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118555 · Cited by 44
Rahbari, A., Hartkamp, R., Moultos, O. A., Bos, A., van den Broeke, L. J. P., Ramdin, M., Dubbeldam, D., Lyulin, A. V., & Vlugt, T. J. H. (2022) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.2c01226 · Cited by 42
Per- and polyfluoroalkyl substances in proton exchange membrane fuel cells — A review
von Tettau, P., Thiele, P., Mauermann, P., Wick, M., Tinz, S., & Pischinger, S. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.236104 · Cited by 44
Wani, A. A., Shaari, N., Kamarudin, S. K., Raduwan, N. F., Yusoff, Y. N., Khan, A. M., Yousuf, S., & Ansari, M. N. M. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02516 · Cited by 33
Gerling, C., Hanauer, M., Berner, U., & Friedrich, K. A. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac44ba · Cited by 30
Wang, W., Ding, L., Xie, Z., Yu, S., Canfield, B. K., Bender, G., Wrubel, J. A., Pivovar, B. S., & Zhang, F. (2023) · Small · doi:10.1002/smll.202207809 · Cited by 26
Review on Electric Resistance in Proton Exchange Membrane Fuel Cells: Advances and Outlook
Wang, J., He, H., Wu, Y., Yang, C., Zhang, H., Zhang, Q., Li, J., Cheng, H., & Cai, W. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c04556 · Cited by 26
Hambardzumyan, A., Vayer, M., Foulon, L., Pernes, M., Devers, T., Bigarré, J., & Aguié‐Béghin, V. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06921-6 · Cited by 24
States of water in recast Nafion® films
Ren, X., Gobrogge, E. A., & Beyer, F. L. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119645 · Cited by 23
Golubkov, S. S., Melnikov, A. P., Statsenko, T. G., Sanginov, E. A., Belmesov, A. A., Don, G. M., Likhomanov, V. S., Kireynov, A. V., Kashin, A. M., Maryasevskaya, A. V., et al. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.09.004 · Cited by 27
Fernihough, O., Ismail, M. S., & El-Kharouf, A. (2022) · Membranes · doi:10.3390/membranes12040430 · Cited by 28
Nguyen, H. L., Kim, Y., Trinh, D. H., & Yu, S. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126485 · Cited by 23
Advantages of ordered catalyst layers in PEMFCs: theoretical perspectives and future development
Yusro, M., & Hacker, V. (2025) · Sustainable Energy & Fuels · doi:10.1039/d5se00028a · Cited by 29
Water transport in anion and proton exchange membranes
Wei, F., Kosakian, A., Liu, J., Kracher, J., Khan, R. J., & Secanell, M. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232494 · Cited by 26
Water Management Strategies for Proton Exchange Membrane Fuel Cells: A Comprehensive Review
Saeed, M. A., El‐Hameed, M. A., Al-Hajri, E., & Kabbani, A. (2025) · Electrochem · doi:10.3390/electrochem6040038 · Cited by 32
Morphology of Thin-Film Nafion on Carbon as an Analogue of Fuel Cell Catalyst Layers
Randall, C. R., Zou, L., Wang, H., Hui, J., Rodríguez‐López, J., Chen-Glasser, M., Dura, J. A., & DeCaluwe, S. C. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14912 · Cited by 18
Impact of liquid-water accumulation and drainage cycles on fuel-cell performance and stability
Kosakian, A., Wei, F., Zhou, J., Jung, S. Y., Sharman, J. D. B., & Secanell, M. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.143221 · Cited by 20
Progress of Polyhedral Oligomeric Silsesquioxanes in Proton Exchange Membrane Fuel Cells: A review
Liu, Y., Ma, H., Tong, Y., Umar, A., Luo, Y., & Zhao, S. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.05.057 · Cited by 18
A Lumped-Mass Model of Membrane Humidifier for PEMFC
Vu, H. N., Nguyen, X. L., & Yu, S. (2022) · Energies · doi:10.3390/en15062113 · Cited by 18
Tiwari, A. K., Yadav, N., Jadhav, D. A., Saxena, D., Anghan, K., Sandhwar, V. K., & Saxena, S. (2024) · Water · doi:10.3390/w16111597 · Cited by 21
Proton-Exchange Membrane Fuel Cell Ionomer Hydration Model Using Finite Volume MethodPreprint
van der Linden, F., Pahon, E., Morando, S., & Bouquain, D. (2022) · SSRN Electronic Journal · doi:10.1016/j.ijhydene.2022.05.012 · Cited by 17
Kaiser, R., Ahn, C., Kim, Y.-H., & Park, J.-C. (2024) · Processes · doi:10.3390/pr12061140 · Cited by 20
Gass, R., Li, Z., Outbib, R., Jemeï, S., & Hissel, D. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad305a · Cited by 21
Sensitivity analysis of operating parameters of proton exchange membrane fuel cells
Liu, F., Li, X., Zhao, P., Sun, X., Zhao, J., Shen, J., Dai, Z., & Zheng, L. (2023) · Ionics · doi:10.1007/s11581-023-05180-y · Cited by 14
Longitudinal strand ordering leads to shear thinning in Nafion
Michelarakis, N., Franz, F., Gkagkas, K., & Gräter, F. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp02024b · Cited by 12
Laoun, B., & Kannan, A. M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.233 · Cited by 14
Wang, W., Li, J., Ding, L., Wu, J., Ma, H., Shi, T., Mench, M. M., & Zhang, F. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119222 · Cited by 15
Rational Design of Photoanodes to Produce Value‐Added Chemicals Coupled with Hydrogen
Khan, H., Bera, S., Jung, M., & Kwon, S. (2024) · ChemElectroChem · doi:10.1002/celc.202400239 · Cited by 11
Hoang-Ngoc, C.-T., & Kim, S. M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238793 · Cited by 13
Rahbari, A., Chakrapani, T. H., Shuang, F., Krokidas, P., Habibi, P., Lagerweij, V. J., Ramdin, M., Vlugt, T. J. H., Hajibeygi, H., Dey, P., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00617 · Cited by 24
Oscillatory Brinkman-micropolar electroosmosis in cylindrical microannuli
El‐Sapa, S., Faltas, M. S., & Ragab, K. E. (2025) · Chinese Journal of Physics · doi:10.1016/j.cjph.2025.08.015 · Cited by 10
Gong, M., Jin, C., & Na, Y. (2023) · Membranes · doi:10.3390/membranes13060555 · Cited by 8
Li, Y., Chen, H., Lu, C., Zhou, H., Liu, Z., & Chen, B. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12202-4 · Cited by 11
A review on nano-micro structure design of fuel cells for efficient heat and mass transport
Xu, S., Fu, X., Li, X., Huang, F., Sheng, T., & Hua, L. (2025) · DeCarbon · doi:10.1016/j.decarb.2025.100132 · Cited by 8
Pollak, M., Bekemeyer, P., Lemke, N., Tegethoff, W. J., & Koehler, J. (2023) · Energies · doi:10.3390/en16062578 · Cited by 8
Parameter Identification of a Quasi-3D PEM Fuel Cell Model by Numerical Optimization
Haslinger, M., Steindl, C., & Lauer, T. (2021) · Processes · doi:10.3390/pr9101808 · Cited by 10
Haslinger, M., & Lauer, T. (2022) · Processes · doi:10.3390/pr10081605 · Cited by 14
Wang, H., Yang, G., Li, S., Shen, Q., Li, Y., & Wang, R. (2023) · Membranes · doi:10.3390/membranes13060559 · Cited by 8
In-situ estimation of water transfer parameters in a proton exchange membrane fuel cell
Bligny, R., Schmitt, T., Dillet, J., Xu, F., Didierjean, S., Hanauer, M., Sauter, U., & Maranzana, G. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232719 · Cited by 7
Zhang, X., Pöschl, R., Ennemoser, A., & Franco, A. A. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c07587 · Cited by 7
Sicilia, M., Cervone, D., Polverino, P., & Pianese, C. (2024) · Energies · doi:10.3390/en17194841 · Cited by 7
Electro-Chemo-Mechanical Model for Polymer Electrolytes
(2024) · doi:10.1149/1945-7111/ad27b1 · Cited by 4
Test Procedure for the Prediction of Water Transport in Polymer Electrolyte Fuel Cells
Lübben, L., Kirsch, S., Kadyk, T., & Eikerling, M. H. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232504 · Cited by 5
Tümmler, M., & Münchgesang, W. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.357 · Cited by 5
Ivanova, M., Peters, R., Müller, M. J., Haas, S., Seidler, M. F., Mutschke, G., Eckert, K., Röse, P., Calnan, S., Bagacki, R., et al. (2023) · Angewandte Chemie · doi:10.1002/ange.202218850 · Cited by 3
Carneiro, L. F., da Costa, E. F., & Matencio, T. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237782 · Cited by 5
Yakubu, A. U., Mohammed, O. A. A., Zhao, J., Ye, X., Jiang, Q., Meng, K., Qingsheng, L., & Xiong, S. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101071 · Cited by 9
Ionic Conductive Membranes for Fuel Cells
(2021) · doi:10.3390/membranes11030159 · Cited by 3
Impact of catalyst support impurities on chemical degradation in polymer electrolyte membranes
Nakamura, S., Sanami, K., Fukaya, N., Gautama, Z., Noda, Z., Yasutake, M., Lyth, S. M., Nishihara, M., & Sasaki, K. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.153188 · Cited by 2
Talaie, A., Rezania, S., Tamadon, A., Kamyab, H., Mehranzamir, K., & Ghasemi, M. (2026) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-026-07235-9 · Cited by 5
Sicilia, M., Cervone, D., Polverino, P., & Pianese, C. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-37-0004 · Cited by 4
Membrane Materials in Proton Exchange Membrane Fuel Cells (PEMFCs)
Monemian, F., & Kargari, A. (2023) · Wiley eBooks · doi:10.1002/9781119829553.ch10 · Cited by 2
A New 0D Physics-Based Model for Proton-Exchange Membrane Fuel Cell Performance Simulation
Nóbrega, P. A., Jacob, A., & Beauger, C. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae6f4f · Cited by 1
Separating the Effect of Thermal Osmosis in PEM Fuel Cell Membrane Mixed Mode Dynamics
Ingarra, N. A., Kobus, C. J., & Maisonneuve, J. (2023) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2023.est.046064 · Cited by 1
A simplified measurement method for gas permeability in multilayer polymer electrolyte membranes
Fukaya, N., Gautama, Z. A. R., Suzuki, T., Sasaki, K., & Nishihara, M. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239546 · Cited by 1
Dickinson, E. J. F., & Rodríguez, O. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad5408 · Cited by 2
Self-citationGolovin, I., Knoppe, K., Kunde, C., & Kienle, A. (2024) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-443-28824-1.50026-0 · Cited by 1
Numerical Modelling and Performance Evaluation of PEMFCs: A Multi-physics Approach
Bardane, A., Faoussi, M., HANNACH, R., & Scutaru, M. L. (2026) · Advanced structured materials · doi:10.1007/978-3-032-20761-6_5
ON SINGLE- AND TWO-PHASE THERMAL OSMOSIS IN PEM FUEL CELL MEMBRANES
Ingarra, N. A., Kobus, C. J., & Maisonneuve, J. (2024) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2024.aes.050878
Special Issue on “Modeling, Simulation and Control of Energy Systems”
Ipsakis, D., & Yiotis, A. G. (2026) · Processes · doi:10.3390/pr14050827
Advances in Fuel Cell Technologies for Efficient Electrochemical Energy Conversion and Storage.
Anusha, G., Deshmukh, R. R., & Sudhakar, A. V. V. (2025) · IGI Global eBooks · doi:10.4018/979-8-3373-3156-0.ch001
A review of CO2 removal technologies for a sustainable future
Talaie, A., Fulazzaky, M. A., Rezania, S., & Tamadon, A. (2026) · Environmental Science and Pollution Research · doi:10.1007/s11356-026-38104-0 · Cited by 2
Sicilia, M., Cervone, D., Polverino, P., & Pianese, C. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.157133
Electro-thermal PEMFC system modeling with experimental validation on 6 kW liquid-cooled stack
Slama, R. B. H., Ankouni, M., Idi, M. M. E., Haouati, C., & Chiekh, M. B. (2026) · Engineering Research Express · doi:10.1088/2631-8695/ae9673
Polymer/ZIFs membranes for proton conductivity: a mathematical modeling study
Soleimani, B., Khoshandam, B., Asl, A. H., & Hooshyari, K. (2024) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-024-00403-9
Di, T., Yoshida, Y., & Kitagawa, H. (2026) · EnergyChem · doi:10.1016/j.enchem.2026.100208
Ionic Conductive Membranes for Fuel Cells
Narducci, R. (2021) · MDPI eBooks · doi:10.3390/books978-3-0365-2768-0
PEMFC‐System Model for BOP Configuration Analysis
Cosse, C., & Leites, K. (2026) · Fuel Cells · doi:10.1002/fuce.70107
Fontana, M. (2021) · theses.fr (ABES) · doi:10.70675/a843ffd0z2f1bz47f7zbf7fz6e9aa1c68de7 · Cited by 3
Luo, W., Feng, A., Xie, H., Wei, Y., Lu, J., Thondaiman, P., & Wang, Q. (2026) · Batteries · doi:10.3390/batteries12080275 · Cited by 2
PEM Fuel Cell Modeling by Application of the Rough Sets Theory
Stjepanović, A., Stojčić, M., Kostadinović, M., Jauševac, G., Jotanović, G., & Kuzmić, G. (2023) · International Symposium INFOTEH-JAHORINA (INFOTEH) · doi:10.1109/infoteh57020.2023.10094050
Metadata
- Authors
- Dickinson, E. J. F., & Smith, G.
- Affiliations
- National Physical Laboratory (GB)
- Corresponding author
- Dickinson, Edmund J. F.
- Venue
- Membranes
- Publisher
- MDPI AG
- Published
- 2020-10-28
- Volume
- 10
- Issue
- 11
- Pages
- 310
- ISSN
- 2077-0375 (ISSN-L)
- PMC
- PMC7692588
- OpenAlex
- W3097817857
- Cited by
- 109
- References
- 192
- Citations by year
- 2026: 17 · 2025: 17 · 2024: 26 · 2023: 20 · 2022: 17 · 2021: 12
- FWCI
- 0.56
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Membranes (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Fraunhofer-Publica (Fraunhofer-Gesellschaft) (submittedVersion)
- Funders
- Department for Business, Energy and Industrial Strategy, UK Government (National Measurement System)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Keywords
- proton-conducting membranes, proton exchange membrane fuel cells, proton transport, moisture sorption isotherms, water diffusion coefficient, electro-osmotic drag, membrane swelling, non-isothermal transport, gas transport, membrane degradation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.