The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
A General Vision for Reduction of Energy Consumption and CO2 Emissions from the Steel Industry
Open accessAbstract
The 2018 IPCC (The Intergovernmental Panel on Climate Change’s) report defined the goal to limit global warming to 1.5 °C by 2050. This will require “rapid and far-reaching transitions in land, energy, industry, buildings, transport, and cities”. The challenge falls on all sectors, especially energy production and industry. In this regard, the recent progress and future challenges of greenhouse gas emissions and energy supply are first briefly introduced. Then, the current situation of the steel industry is presented. Steel production is predicted to grow by 25–30% by 2050. The dominant iron-making route, blast furnace (BF), especially, is an energy-intensive process based on fossil fuel consumption; the steel sector is thus responsible for about 7% of all anthropogenic CO2 emissions. In order to take up the 2050 challenge, emissions should see significant cuts. Correspondingly, specific emissions (t CO2/t steel) should be radically decreased. Several large research programs in big steelmaking countries and the EU have been carried out over the last 10–15 years or are ongoing. All plausible measures to decrease CO2 emissions were explored here based on the published literature. The essential results are discussed and concluded. The specific emissions of “world steel” are currently at 1.8 t CO2/t steel. Improved energy efficiency by modernizing plants and adopting best available technologies in all process stages could decrease the emissions by 15–20%. Further reductions towards 1.0 t CO2/t steel level are achievable via novel technologies like top gas recycling in BF, oxygen BF, and maximal replacement of coke by biomass. These processes are, however, waiting for substantive industrialization. Generally, substituting hydrogen for carbon in reductants and fuels like natural gas and coke gas can decrease CO2 emissions remarkably. The same holds for direct reduction processes (DR), which have spread recently, exceeding 100 Mt annual capacity. More radical cut is possible via CO2 capture and storage (CCS). The technology is well-known in the oil industry; and potential applications in other sectors, including the steel industry, are being explored. While this might be a real solution in propitious circumstances, it is hardly universally applicable in the long run. More auspicious is the concept that aims at utilizing captured carbon in the production of chemicals, food, or fuels e.g., methanol (CCU, CCUS). The basic idea is smart, but in the early phase of its application, the high energy-consumption and costs are disincentives. The potential of hydrogen as a fuel and reductant is well-known, but it has a supporting role in iron metallurgy. In the current fight against climate warming, H2 has come into the “limelight” as a reductant, fuel, and energy storage. The hydrogen economy concept contains both production, storage, distribution, and uses. In ironmaking, several research programs have been launched for hydrogen production and reduction of iron oxides. Another global trend is the transfer from fossil fuel to electricity. “Green” electricity generation and hydrogen will be firmly linked together. The electrification of steel production is emphasized upon in this paper as the recycled scrap is estimated to grow from the 30% level to 50% by 2050. Finally, in this review, all means to reduce specific CO2 emissions have been summarized. By thorough modernization of production facilities and energy systems and by adopting new pioneering methods, “world steel” could reach the level of 0.4–0.5 t CO2/t steel and thus reduce two-thirds of current annual emissions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bio-hydrogen production from waste materials
Kapdan, I. K., & Kargi, F. (2006) · Enzyme and Microbial Technology · doi:10.1016/j.enzmictec.2005.09.015 · Cited by 1,875
Assessment of hydrogen direct reduction for fossil-free steelmaking
Vogl, V., Åhman, M., & Nilsson, L. J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.279 · Cited by 779
Ex situ aqueous mineral carbonation
Gerdemann, S. J., O'Connor, W. K., Dahlin, D. C., Penner, L. R., & Rush, H. (2007) · Environmental Science & Technology · doi:10.1021/es0619253 · Cited by 633
Closing the loop: captured CO 2 as a feedstock in the chemical industry
Otto, A., Grube, T., Schiebahn, S., & Stolten, D. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02591e · Cited by 482
Biomass applications in iron and steel industry: An overview of challenges and opportunities
Mousa, E., Wang, C., Riesbeck, J., & Larsson, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.07.061 · Cited by 471
Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen
Bhaskar, A., Assadi, M., & Nikpey Somehsaraei, H. (2020) · Energies · doi:10.3390/en13030758 · Cited by 414
Pauliuk, S., Milford, R. L., Müller, D. B., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es303149z · Cited by 334
Hydrogen production from the thermochemical conversion of biomass: issues and challenges
Dou, B., Zhang, H., Song, Y., Zhao, L., Jiang, B., He, M., Ruan, C., Chen, H., & Xu, Y. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00535d · Cited by 323
Otto, A., Robinius, M., Grube, T., Schiebahn, S., Praktiknjo, A., & Stolten, D. (2017) · Energies · doi:10.3390/en10040451 · Cited by 266
Overview of Carbon Capture Technology: Microalgal Biorefinery Concept and State-of-the-Art
Singh, J., & Dhar, D. W. (2019) · Frontiers in Marine Science · doi:10.3389/fmars.2019.00029 · Cited by 264
Pei, M., Petäjäniemi, M., Regnell, A., & Wijk, O. (2020) · Metals · doi:10.3390/met10070972 · Cited by 239
World Best Practice Energy Intensity Values for SelectedIndustrial Sectors
Worrell, E., Price, L., Neelis, M., Galitsky, C., & Zhou, N. (2007) · doi:10.2172/927032 · Cited by 234
Extensive review of the opportunities to use biomass-based fuels in iron and steelmaking processes
Suopajärvi, H., Kemppainen, A., Haapakangas, J., & Fabritius, T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.029 · Cited by 230
Comparison of Lifecycle Greenhouse Gas Emissions of Various Electricity Generation Sources
Berg, B. (2010) · Cited by 220
Annex III - Technology-specific cost and performance parameters
Brückner, T., Fulton, L., Hertwich, E. G., McKinnon, A. C., Schaeffer, R., Schlömer, S., Smith, P., Wiser, R. H., Haensel, G., Jaeger, D. D., et al. (2013) · Cited by 219
Zhang, Q., Xu, J., Wang, Y., Hasanbeigi, A., Zhang, W., Lu, H., & Arens, M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.10.084 · Cited by 210
Biomass as a Source of Renewable Carbon for Iron and Steelmaking
Norgate, T., Haque, N., Somerville, M., & Jahanshahi, S. (2012) · ISIJ International · doi:10.2355/isijinternational.52.1472 · Cited by 191
Morfeldt, J., Nijs, W., & Silveira, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.045 · Cited by 182
CO2 mineral sequestration: developments toward large‐scale application
Zevenhoven, R., Fagerlund, J., & Songok, J. K. (2011) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg3.7 · Cited by 143
Handler, R. M., Shonnard, D. R., Griffing, E. M., Lai, A., & Palou-Rivera, I. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03215 · Cited by 142 · cited 2×
“A demonstration scale plant has been in operation in Shougang China since 2018, and a bigger demonstration plant with an estimated capacity of 64,000 tons ethanol/year is under construction at Arcelor Mittal Ghent, Belgium [64].”
BackgroundPilot-scale experimental work on carbon dioxide sequestration using steelmaking slag
Said, A., Laukkanen, T., & Järvinen, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.136 · Cited by 126
Reducing Net CO2 Emissions Using Charcoal as a Blast Furnace Tuyere Injectant
Mathieson, J. G., Rogers, H., Somerville, M. A., & Jahanshahi, S. (2012) · ISIJ International · doi:10.2355/isijinternational.52.1489 · Cited by 84
Time-dependent material flow analysis of iron and steel in the UK
Geyer, R., Davis, J., Ley, J., He, J., Clift, R., Kwan, A. S. K., Sansom, M., & Jackson, T. P. (2006) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2006.08.006 · Cited by 59
Carbon Reduction Programs and Key Technologies in global Steel Industry
Fu, J., Tang, G.-H., Zhao, R., & Hwang, W. (2014) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(14)60042-x · Cited by 45
Optimal design and operation of a steel plant integrated with a polygeneration system
Ghanbari, H., Saxén, H., & Grossmann, I. E. (2013) · AIChE Journal · doi:10.1002/aic.14098 · Cited by 38
Renewable absorbents for CO 2 capture: from biomass to nature
He, Q., Shi, M., Liang, F., Xu, L., Ji, L., & Yan, S. (2019) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1902 · Cited by 37
Metals Production, CO2 Mineralization and LCA
Zevenhoven, R. (2020) · Metals · doi:10.3390/met10030342 · Cited by 25
Cited by
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Shahabuddin, M., Brooks, G., & Rhamdhani, M. A. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136391 · Cited by 298
To what extent could biochar replace coal and coke in steel industries?
Safarian, S. (2023) · Fuel · doi:10.1016/j.fuel.2023.127401 · Cited by 113
Metadata
- Authors
- Holappa, L.
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2020-08-19
- Volume
- 10
- Issue
- 9
- Pages
- 1117
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W3080857495
- Cited by
- 336
- References
- 27
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.