The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Recent Development in Beta Titanium Alloys for Biomedical Applications
Open accessAbstract
β-type titanium (Ti) alloys have attracted a lot of attention as novel biomedical materials in the past decades due to their low elastic moduli and good biocompatibility. This article provides a broad and extensive review of β-type Ti alloys in terms of alloy design, preparation methods, mechanical properties, corrosion behavior, and biocompatibility. After briefly introducing the development of Ti and Ti alloys for biomedical applications, this article reviews the design of β-type Ti alloys from the perspective of the molybdenum equivalency (Moeq) method and DV-Xα molecular orbital method. Based on these methods, a considerable number of β-type Ti alloys are developed. Although β-type Ti alloys have lower elastic moduli compared with other types of Ti alloys, they still possess higher elastic moduli than human bones. Therefore, porous β-type Ti alloys with declined elastic modulus have been developed by some preparation methods, such as powder metallurgy, additive manufacture and so on. As reviewed, β-type Ti alloys have comparable or even better mechanical properties, corrosion behavior, and biocompatibility compared with other types of Ti alloys. Hence, β-type Ti alloys are the more suitable materials used as implant materials. However, there are still some problems with β-type Ti alloys, such as biological inertness. As such, summarizing the findings from the current literature, suggestions forβ-type Ti alloys with bioactive coatings are proposed for the future development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationNew Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Single-Crystal Elastic Moduli and the hcp → bcc Transformation in Ti, Zr, and Hf
Fisher, E. S., & Renken, C. J. (1964) · Physical Review · doi:10.1103/physrev.135.a482 · Cited by 904
Comparison of metal release from various metallic biomaterials in vitro
Okazaki, Y., & Gotoh, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.005 · Cited by 862
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationStress shielding and bone resorption in shoulder arthroplasty
Nagels, J., Stokdijk, M., & Rozing, P. M. (2003) · Journal of Shoulder and Elbow Surgery · doi:10.1067/mse.2003.22 · Cited by 707
Aging of bone tissue: mechanical properties.
Burstein, A. H., Reilly, D. T., & Martens, M. A. (1976) · PubMed · Cited by 614
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationUnmasking chloride attack on the passive film of metals
(2018) · doi:10.1038/s41467-018-04942-x · Cited by 593
Liu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationCorrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationAging of bone tissue: mechanical properties
Burstein, A., Reilly, D., & Martens, M. (1976) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197658010-00015 · Cited by 569
Mechanical properties of porous titanium compacts prepared by powder sintering
Oh, I.-H., Nomura, N., Masahashi, N., & Hanada, S. (2003) · Scripta Materialia · doi:10.1016/j.scriptamat.2003.08.018 · Cited by 569
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.018 · Cited by 553
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationProcessing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
Zhang, L.-C., Chen, L.-Y., & Wang, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901258 · Cited by 456
Self-citationIshimoto, T., Hagihara, K., Hisamoto, K., Sun, S., & Nakano, T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.038 · Cited by 446
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationZhang, L.-C., Jia, Z., Lyu, F., Liang, S.-X., & Lu, J. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100576 · Cited by 312
Self-citationFischer, M., Joguet, D., Robin, G., Peltier, L., & Laheurte, P. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.02.033 · Cited by 295
Porous Titanium Implants: A Review
Pałka, K., & Pokrowiecki, R. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700648 · Cited by 279
Grain-refinement mechanisms in titanium alloys
Bermingham, M. J., McDonald, S. D., Dargusch, M. S., & StJohn, D. H. (2008) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2008.0002 · Cited by 256
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Self-citationUltrahigh-performance TiNi shape memory alloy by 4D printing
Lu, H. Z., Yang, C. Q., Luo, X., Ma, H. W., Song, B., Li, Y., & Zhang, L. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138166 · Cited by 222
Self-citationWang, J. C., Liu, Y. J., Qin, P., Liang, S. X., Sercombe, T. B., & Zhang, L. C. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.06.001 · Cited by 208
Self-citationCorrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Self-citationWang, Q., Han, C., Choma, T., Wei, Q., Yan, C., Song, B., & Shi, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.026 · Cited by 194
Compelling Rejuvenated Catalytic Performance in Metallic Glasses
Liang, S., Jia, Z., Liu, Y., Zhang, W., Wang, W., Lü, J., & Zhang, L. (2018) · Advanced Materials · doi:10.1002/adma.201802764 · Cited by 194
Self-citationAge variations in the properties of human tibial travecular bone
Ding, M. L., Dalstra, M., Danielsen, C. C., Kabel, J., Hvid, I., & Linde, F. (1997) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.79b6.7538 · Cited by 181
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.08.006 · Cited by 163
Karre, R., Niranjan, M. K., & Dey, S. R. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.061 · Cited by 145
Biocompatibility of new Ti–Nb–Ta base alloys
Hussein, A., Gepreel, M. A.-H., Gouda, M. K., Hefnawy, A., & Kandil, S. H. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.12.071 · Cited by 144
Chen, W., Chen, C., Zi, X., Cheng, X., Zhang, X., Lin, Y. C., & Zhou, K. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.04.087 · Cited by 133
Shaped metal deposition technique in additive manufacturing: A review
Yılmaz, O., & Ugla, A. A. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405416640181 · Cited by 128
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Qin, P., Liu, Y., Sercombe, T. B., Li, Y., Zhang, C., Cao, C., Sun, H., & Zhang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00319 · Cited by 128
Self-citationMcMahon, R. E., Ma, J., Verkhoturov, S. V., Munoz‐Pinto, D. J., Karaman, İ., Rubitschek, F., Maier, H. J., & Hahn, M. S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.034 · Cited by 120
Анатольевич, П. И., Sufiiarov, V. S., Popovich, A., Masailo, D., & Grigoriev, A. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.325 · Cited by 117
Selective Laser Melting of Ti-45Nb Alloy
Schwab, H., Prashanth, K. G., Löber, L., Kühn, U., & Eckert, J. (2015) · Metals · doi:10.3390/met5020686 · Cited by 113
Hafeez, N., Liu, S., Lu, E., Wang, L., Liu, R., Lü, W., & Zhang, L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.138 · Cited by 109
Self-citationElectrochemical corrosion behavior of Ti–24Nb–4Zr–8Sn alloy in a simulated physiological environment
Bai, Y., Li, S. J., Prima, F., Hao, Y., & Yang, R. L. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.12.096 · Cited by 100
Afonso, C. R. M., Ferrandini, P. L., Ramirez, A. J., & Caram, R. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.010 · Cited by 97
Liu, Y., Ren, D. C., Li, S. J., Wang, H., Zhang, L., & Sercombe, T. B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101060 · Cited by 97
Self-citationZhao, D., Han, C., Li, J., Liu, J., & Wei, Q. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110784 · Cited by 86
Zhang, L., Xu, J. Z., & Eckert, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2234535 · Cited by 78
Self-citationChilderhouse, T., & Jackson, M. (2019) · Metals · doi:10.3390/met9060689 · Cited by 78
Liu, S., Liu, J., Wang, L., Ma, L. W., Zhong, Y., Lü, W., & Zhang, L. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.02.025 · Cited by 76
Self-citationGu, H., Ding, Z., Yang, Z., Yu, W., Zhang, W., Lü, W., Zhang, L., Wang, K., Wang, L., & Fu, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107680 · Cited by 67
Self-citationWang, L., Qu, J., Chen, L., Meng, Q., Zhang, L., Qin, J., Zhang, D., & Lü, W. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3089-8 · Cited by 56
Self-citationIn vitro apatite formation on chemically treated (P/M) Ti–13Nb–13Zr
Müller, F. A., Bottino, M. C., Müller, L., Henriques, V. A. R., Lohbauer, U., Bressiani, A. H. A., & Bressiani, J. C. (2007) · Dental Materials · doi:10.1016/j.dental.2007.02.005 · Cited by 51
Hoene, A., Walschus, U., Patrzyk, M., Finke, B., Lucke, S., Nebe, B. J., Schroeder, K., Ohl, A., & Schlosser, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.003 · Cited by 46
A 3D-Printed Ultra-Low Young’s Modulus β-Ti Alloy for Biomedical Applications
Pellizzari, M., Jam, A., Tschon, M., Fini, M., Lora, C., & Benedetti, M. (2020) · Materials · doi:10.3390/ma13122792 · Cited by 46
Speirs, M., Humbeeck, J. V., Schrooten, J., Luyten, J., & Kruth, J. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.016 · Cited by 44
Clark, D., Whittaker, M. T., & Bache, M. R. (2011) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-011-9599-x · Cited by 43
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationTshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Metadata
- Authors
- Chen, L.-Y., Cui, Y.-W., & Zhang, L.-C.
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2020-08-24
- Volume
- 10
- Issue
- 9
- Pages
- 1139
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W3080725936
- Cited by
- 330
- References
- 67
- FWCI
- 14.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.