Lithium Production and Recovery Methods: Overview of Lithium Losses
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
The objective of this study is to describe primary lithium production and to summarize the methods for combined mechanical and hydrometallurgical recycling of lithium-ion batteries (LIBs). This study also aims to draw attention to the problem of lithium losses, which occur in individual recycling steps. The first step of hydrometallurgical treatment is leaching, which is an effective method capable of transferring over 99% of the present metals to the leach solutions. Extraction of metals after leaching can be conducted using various methods, with precipitation being the most commonly used. The precipitation of other metals can result in the co-precipitation of lithium, causing total lithium losses up to 30%. To prevent such losses, solvent extraction methods are used to selectively remove elements, such as Co, Ni, Al, and Mn. Solvent extraction (SX) is highly effective, reducing the losses to 3% per extraction stage and reducing overall lithium losses to 15%. After the refining, lithium is precipitated as lithium carbonate. High lithium carbonate solubility (1.5 g/L) and high liquid to solid leaching ratios require costly and avoidable operations to be implemented in order to enhance lithium concentration. Therefore, it is suggested that more studies should focus on multistage leaching with lower L/S ratios.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982 · cited 3×
“Subse-quently, the LIBs are dimensioned, and they undergo separation on water rafts, gravity, and magnetic separation [27,38].”
BackgroundMethodNeumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
Flexer, V., Baspineiro, C. F., & Galli, C. I. (2018) · Science of the Total Environment · doi:10.1016/j.scitotenv.2018.05.223 · Cited by 768
Lithium-Ion Battery Recycling─Overview of Techniques and Trends
Baum, Z. J., Bird, R. E., Yu, X., & Ma, J. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02602 · Cited by 747
Lithium market research – global supply, future demand and price development
Martin, G., Rentsch, L., Höck, M., & Bertau, M. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.11.004 · Cited by 740 · cited 1×
“In recent years, there has been a noticeable increase in lithium production due to the growing interest in this valuable resource, which aligns with the escalating demand for electric vehicles and cordless consumer electronics [1].”
BackgroundA review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701 · cited 1×
“Such fires are attributed, for example, to accidental short circuits due to the absence of suitable containers in the presence of water [65,66].”
BackgroundExtraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536 · cited 1×
“However, the production of ion-selective membranes can be a progressive method of using LIS, which would make it possible to process solutions of higher concentrations [16,117–120].”
MethodRecovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509 · cited 1×
“Flow sheet of lithium recovery from Salar de Uyuni brine, reproduced from [32] with permission from Elsevier, 2023.”
BackgroundHydrometallurgical separation of aluminium, cobalt, copper and lithium from spent Li-ion batteries
Ferreira, D. A., Prados, L. M. Z., Majuste, D., & Mansur, M. B. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.077 · Cited by 463
The beneficiation of lithium minerals from hard rock ores: a review
Tadesse, B., Makuei, F., Albijanic, B., & Dyer, L. (2019) · Minerals Engineering · doi:10.1016/j.mineng.2018.11.023 · Cited by 452
Lithium: sources, production, uses, and recovery outlook
Talens Peiró, L., Villalba Méndez, G., & Ayres, R. U. (2013) · JOM · doi:10.1007/s11837-013-0666-4 · Cited by 318
Tian-ming, G., MNR Key Laboratory of Metallogeny and Mineral Assessment, I. O. M. R. C. A. O. G. S., Na, F., Wu, C., Tao, D., Research Center for Strategy of Global Mineral Resources, C. G. S., China Huanqiu Contracting & Engineering Corp., L. B. B., & SDU Life Cycle Engineering, D. O. G. T. (2023) · China Geology · doi:10.31035/cg2022088 · Cited by 216
Study on Li+ uptake by lithium ion-sieve via the pH technique
Wang, L., Meng, C. G., & Ma, W. (2009) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.09.050 · Cited by 121
Windisch-Kern, S., Holzer, A., Ponak, C., & Raupenstrauch, H. (2021) · Processes · doi:10.3390/pr9010084 · Cited by 116
Recovery of magnesium from Uyuni salar brine as high purity magnesium oxalate
Tran, K. T., Van Luong, T., An, J.-W., Kang, D.-J., Kim, M.-J., & Tran, T. (2013) · Hydrometallurgy · doi:10.1016/j.hydromet.2013.05.013 · Cited by 86
Recovery of Lithium from Simulated Secondary Resources (LiCO3) through Solvent Extraction
Waengwan, P., & Eksangsri, T. (2020) · Sustainability · doi:10.3390/su12177179 · Cited by 24
Cited by
The recovery and separation of lithium by using solvent extraction methods
Kanagasundaram, T., Murphy, O., Haji, M. N., & Wilson, J. J. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215727 · Cited by 263
Balaram, V., Santosh, M., Satyanarayanan, M., Srinivas, N., & Gupta, H. (2024) · Geoscience Frontiers · doi:10.1016/j.gsf.2024.101868 · Cited by 231
Boroumand, Y., & Razmjou, A. (2024) · Desalination · doi:10.1016/j.desal.2024.117406 · Cited by 107
Critical Review of Lithium Recovery Methods: Advancements, Challenges, and Future Directions
Jose, S. A., Stoll, J. L., Smith, T., Jackson, C., Dieleman, T., Leath, E., Eastwood, N., & Menezes, P. L. (2024) · Processes · doi:10.3390/pr12102203 · Cited by 57
Metadata
- Authors
- Marcinov, V., Klimko, J., Takáčová, Z., Pirošková, J., Miškufová, A., Sommerfeld, M., Dertmann, C., Friedrich, B., & Oráč, D.
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2023-06-29
- Volume
- 13
- Issue
- 7
- Pages
- 1213
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W4382776219
- Cited by
- 65
- References
- 17
- FWCI
- 6.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.