Liquefaction of Biomass and Upgrading of Bio-Oil: A Review
Open accessThe DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
The liquefaction of biomass is an important technology to converse the biomass into valuable biofuel. The common technologies for liquefaction of biomass are indirect liquefaction and direct liquefaction. The indirect liquefaction refers to the Fischer–Tropsch (F–T) process using the syngas of biomass as the raw material to produce the liquid fuel, including methyl alcohol, ethyl alcohol, and dimethyl ether. The direct liquefaction of biomass refers to the conversion biomass into bio-oil, and the main technologies are hydrolysis fermentation and thermodynamic liquefaction. For thermodynamic liquefaction, it could be divided into fast pyrolysis and hydrothermal liquefaction. In addition, this review provides an overview of the physicochemical properties and common upgrading methods of bio-oil.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water
Mohan, D., & Pittman Jr., C. U. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.060 · Cited by 1,855
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
Stefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
A review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730 · cited 2×
“i the literature, the content of water in the biomass raw material is usually more than 40% for pyrolysis liquefaction [139].”
BackgroundA review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624 · cited 2×
“Especially, Na and K could reduce the yield of liquid-phase products, and S and P could also reduce the yield of bio-oil resulting in the higher biochar formation [80,81].”
BackgroundOperating parameters for bio-oil production in biomass pyrolysis: A review
Guedes, R. E., Luna, A. S., & Torres, A. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.019 · Cited by 619
Hydrothermal processing of microalgae using alkali and organic acids
Ross, A. B., Biller, P., Kubacki, M. L., Li, H., Lea-Langton, A., & Jones, J. M. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.025 · Cited by 617
Fractionating recalcitrant lignocellulose at modest reaction conditions
Zhang, Y. P., Ding, S., Mielenz, J. R., Cui, J., Elander, R. T., Laser, M., Himmel, M. E., McMillan, J. R., & Lynd, L. R. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21386 · Cited by 589
Hydrothermal Liquefaction of Macroalgae Enteromorpha prolifera to Bio-oil
Zhou, D., Zhang, L., Zhang, S., Fu, H., & Chen, J. (2010) · Energy & Fuels · doi:10.1021/ef100151h · Cited by 531 · cited 2×
“While, there is little influence on the yield of bio-oil when the reaction pressure overcomes the supercritical conditions for liquefaction [153,154].”
BackgroundSelf-citationOnay, O. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.01.001 · Cited by 363 · cited 1×
“% [104] Palm kernel shell 1 L/min 50 wt.”
Zhu, J. Y., Pan, X., & Zalesny, R. S. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-2654-8 · Cited by 350
Bio-oil production from rice husk fast pyrolysis in a conical spouted bed reactor
Alvarez, J., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.02.074 · Cited by 329 · cited 2×
“At low temperatures, the main components in bio-oil are alkenes, alkanes, long-chain fatty acids and esters, aliphatic nitriles, and amides, while the components obtained at higher temperature change to short aliphatic carbons and lower-molecular-weight compounds of alcohols, ketones with lower H/C ratio [90,91].”
BackgroundUpgrading of crude algal bio-oil in supercritical water
Duan, P., & Savage, P. E. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.08.013 · Cited by 302
Production of bio-oil from fixed bed pyrolysis of bagasse
Asadullah, M., Rahman, M. A., Ali, M. M., Rahman, M. S., Motin, M. A., Sultan, M. B., & Alam, M. R. (2007) · Fuel · doi:10.1016/j.fuel.2007.02.007 · Cited by 292
Patel, M., & Kumar, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.146 · Cited by 284 · cited 2×
“Physical pre-treatment refers to the reduction of physical size of raw materials to increase enzyme-accessible surface areas [29], and the primary pathways of physical pre-treatments are mechanical comminution [30], pyrolysis [31], and steam explosion [32].”
BackgroundMethodZhang, H., Xiao, R., Wang, D., Zhong, Z., Song, M., Pan, Q., & He, G. (2009) · Energy & Fuels · doi:10.1021/ef900720m · Cited by 149
Self-citationHuang, X., Cao, J.-P., Shi, P., Zhao, X.-Y., Feng, X.-B., Zhao, Y.-P., Fan, X., Wei, X.-Y., & Takarada, T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.10.003 · Cited by 126 · cited 2×
“At low temperatures, the main components in bio-oil are alkenes, alkanes, long-chain fatty acids and esters, aliphatic nitriles, and amides, while the components obtained at higher temperature change to short aliphatic carbons and lower-molecular-weight compounds of alcohols, ketones with lower H/C ratio [90,91].”
BackgroundBartoli, M., Rosi, L., Giovannelli, A., Frediani, P., & Frediani, M. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.10.016 · Cited by 55 · cited 1×
“, carbonization, gasification, or thermal cracking, resulting in a lower yield of bio-oils [113].”
Background
Cited by
Recent advances in the valorization of plant biomass
Ning, P., Yang, G., Hu, L., Sun, J., Shi, L., Zhou, Y., Wang, Z., & Yang, J. (2021) · Biotechnology for Biofuels · doi:10.1186/s13068-021-01949-3 · Cited by 296
Upgrading of Bio-Oil Model Compounds and Bio-Crude into Biofuel by Electrocatalysis: A Review
Chen, G., Liang, L., Li, N., Lu, X., Yan, B., & Cheng, Z. (2021) · ChemSusChem · doi:10.1002/cssc.202002063 · Cited by 48
Fischer–Tropsch Synthesis Catalysts for Selective Production of Diesel Fraction
Mazurova, K., Miyassarova, A., Eliseev, O., Stytsenko, V., Glotov, A., & Stavitskaya, A. (2023) · Catalysts · doi:10.3390/catal13081215 · Cited by 28
Metadata
- Authors
- Zhang, S., Yang, X., Zhang, H., Chu, C., Zheng, K., Ju, M., & Liu, L.
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-06-17
- Volume
- 24
- Issue
- 12
- Pages
- 2250
- ISSN
- 1420-3049 (ISSN-L)
- OpenAlex
- W2952705642
- Cited by
- 180
- References
- 26
- FWCI
- 6.05
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.