Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index; none of the 32 sources its claims cite is checked for support yet.

Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa

Open access
Lima, Marta, Teixeira-Santos, Rita, Gomes, Luciana C., Faria, Sara I., Valcarcel, Jesus, Vázquez, José Antonio, Cerqueira, Miguel A., Pastrana, Lorenzo, Bourbon, Ana I., Mergulhão, Filipe J. · 2021 · Molecules

Abstract

Implantable medical devices (IMDs) are susceptible to microbial adhesion and biofilm formation, which lead to several clinical complications, including the occurrence of implant-associated infections. Polylactic acid (PLA) and its composites are currently used for the construction of IMDs. In addition, chitosan (CS) is a natural polymer that has been widely used in the medical field due to its antimicrobial and antibiofilm properties, which can be dependent on molecular weight (Mw). The present study aims to evaluate the performance of CS-based surfaces of different Mw to inhibit bacterial biofilm formation. For this purpose, CS-based surfaces were produced by dip-coating and the presence of CS and its derivatives onto PLA films, as well surface homogeneity were confirmed by contact angle measurements, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The antimicrobial activity of the functionalized surfaces was evaluated against single- and dual-species biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. Chitosan-based surfaces were able to inhibit the development of single- and dual-species biofilms by reducing the number of total, viable, culturable, and viable but nonculturable cells up to 79%, 90%, 81%, and 96%, respectively, being their activity dependent on chitosan Mw. The effect of CS-based surfaces on the inhibition of biofilm formation was corroborated by biofilm structure analysis using confocal laser scanning microscopy (CLSM), which revealed a decrease in the biovolume and thickness of the biofilm formed on CS-based surfaces compared to PLA. Overall, these results support the potential of low Mw CS for coating polymeric devices such as IMDs where the two bacteria tested are common colonizers and reduce their biofilm formation.

Overview

CoChat Summary

TL;DR

Chitosan-coated PLA surfaces, especially low-molecular-weight chitosan (CS2 129 kDa and CS3 61 kDa), reduced single- and dual-species biofilms of *Staphylococcus aureus* and *Pseudomonas aeruginosa* in vitro. The coatings decreased total, viable, culturable, and VBNC cells and reduced biofilm biovolume and thickness compared with uncoated PLA.

Key findings

  • CS-based surfaces reduced total, viable, culturable, and VBNC cells up to 79%, 90%, 81%, and 96%, respectively, relative to PLA.
  • For *S. aureus*, total cells were 33–79% lower than PLA; CS2- and CS3-PLA viable cells were 39% and 20% of the control; culturable cells were 40–51% of the control; VBNC cells were reduced by 21–78%. For *P. aeruginosa*, biofilms on CS-based surfaces showed lower percentages of total (45–66%), viable (10–44%), and culturable (20–46%) cells compared with PLA, and CS2- and CS3-PLA reduced VBNC cells by 93% and 96%.
  • In dual-species biofilms, CS-based surfaces showed lower percentages of total (27–53%), viable (11–34%), and culturable (19–66%) cells compared with PLA, and VBNC cells were reduced by more than 94% on CS1-, CS2-, and CS3-PLA.
  • CLSM showed that CS2 and CS3 reduced *S. aureus* biovolume and thickness by on average 78% and 65%; CS1 and CS2 reduced *P. aeruginosa* biovolume and thickness by 56% and 50%, while CS3 reduced both by around 66%; dual-species biofilms on CS-based surfaces had on average 57% less biovolume and 48% less thickness than on PLA, with CS3-PLA most efficient.

Methods

  • Chitosan was extracted from *Loligo opalescens* squid endoskeletons, depolymerized to β-CS (294 kDa), CS1 (186 kDa), CS2 (129 kDa), and CS3 (61 kDa), and immobilized at 0.5% (w/v) onto plasma-treated PLA films by dip-coating; surfaces were characterized by water contact angle, FTIR, XRD, and SEM.
  • Single- and dual-species biofilms of *S. aureus* ATCC 25923 and mCherry-*P. aeruginosa* PAO1 were formed under static conditions at 37 °C for 24 h in 12-well plates; dual-species inocula were mixed 1:1.
  • Biofilm cells were quantified by CFU counting, epifluorescence microscopy with Live/Dead staining, and VBNC calculated as viable minus culturable cells; CLSM with SYTO9/mCherry and COMSTAT2 measured biovolume and thickness. Statistical comparisons used Mann-Whitney tests and one-way ANOVA at p < 0.05.

Limitations

  • The paper does not state a limitations section.
  • Evident from the text: the study is in vitro, uses static 24 h biofilm assays, tests only two reference strains (*S. aureus* ATCC 25923 and *P. aeruginosa* PAO1), uses a single chitosan concentration (0.5% w/v), and reports no in vivo or cytotoxicity/biocompatibility testing of the functionalized surfaces.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/molecules26144378

Cites

80 of 80 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 FTIR spectrum of (a) PLA and CS-PLA surfaces and (b) an inset graphic showing the characteristic bands of CS onto PLA films.
Figure 1 FTIR spectrum of (a) PLA and CS-PLA surfaces and (b) an inset graphic showing the characteristic bands of CS onto PLA films.CC BY · PubMed Central
Figure 2 Percentage of total, viable, culturable, and viable but nonculturable (VBNC) cells for (a) S. aureus, (b) P. aeruginosa, and (c) dual-species biofilms formed during 24 h on PLA and CS-coated PLA surfaces (β-CS, CS1, CS2, and CS3). Differences between functionalized surfaces were evaluated using the nonparametric Mann–Whitney test and represented for p-values < 0.05 by *, ○, □, and Δ when compared to PLA, β-CS-PLA, CS1-PLA, and CS2-PLA, respectively.
Figure 2 Percentage of total, viable, culturable, and viable but nonculturable (VBNC) cells for (a) S. aureus, (b) P. aeruginosa, and (c) dual-species biofilms formed during 24 h on PLA and CS-coated PLA surfaces (β-CS, CS1, CS2, and CS3). Differences between functionalized surfaces were evaluated using the nonparametric Mann–Whitney test and represented for p-values < 0.05 by *, ○, □, and Δ when compared to PLA, β-CS-PLA, CS1-PLA, and CS2-PLA, respectively.CC BY · PubMed Central
Figure 3 Single-species biofilms of (a–e) S. aureus and (f–j) P. aeruginosa developed on PLA and CS-coated PLA surfaces. These representative images were obtained from confocal z-stacks using IMARIS software and present an aerial, three-dimensional (3D) view of the biofilms. The shadow on the right represents the vertical projection of the biofilm. Scale bars are 50 μm.
Figure 3 Single-species biofilms of (a–e) S. aureus and (f–j) P. aeruginosa developed on PLA and CS-coated PLA surfaces. These representative images were obtained from confocal z-stacks using IMARIS software and present an aerial, three-dimensional (3D) view of the biofilms. The shadow on the right represents the vertical projection of the biofilm. Scale bars are 50 μm.CC BY · PubMed Central
Figure 4 Biovolumes (a,c,e) and thickness (b,d,f) of S. aureus and P. aeruginosa single-species biofilms, and of dual-species biofilms (S. aureus + P. aeruginosa) on PLA and CS-coated PLA surfaces. These parameters were obtained from confocal image series using the COMSTAT2 tool associated with the ImageJ software. The means ± standard deviations for three independent experiments are illustrated. Statistical analysis was performed using one-way analysis of variance (ANOVA) and significant differences were represented for p-values < 0.05 by *, ○, □, and Δ when compared with PLA, β-CS, CS1, and CS2, respectively.
Figure 4 Biovolumes (a,c,e) and thickness (b,d,f) of S. aureus and P. aeruginosa single-species biofilms, and of dual-species biofilms (S. aureus + P. aeruginosa) on PLA and CS-coated PLA surfaces. These parameters were obtained from confocal image series using the COMSTAT2 tool associated with the ImageJ software. The means ± standard deviations for three independent experiments are illustrated. Statistical analysis was performed using one-way analysis of variance (ANOVA) and significant differences were represented for p-values < 0.05 by *, ○, □, and Δ when compared with PLA, β-CS, CS1, and CS2, respectively.CC BY · PubMed Central
Figure 5 Dual-species biofilms of S. aureus and P. aeruginosa on PLA and CS-coated PLA surfaces. These representative images were obtained using IMARIS software and show an aerial view of biofilm structures, with the shadow on the right representing the vertical projection of the biofilm. The first row (a–e) presents the combination of red and green filters (S. aureus + P. aeruginosa), while the second row (f–j) corresponds only to the green filter (S. aureus). Scale bars are 50 μm.
Figure 5 Dual-species biofilms of S. aureus and P. aeruginosa on PLA and CS-coated PLA surfaces. These representative images were obtained using IMARIS software and show an aerial view of biofilm structures, with the shadow on the right representing the vertical projection of the biofilm. The first row (a–e) presents the combination of red and green filters (S. aureus + P. aeruginosa), while the second row (f–j) corresponds only to the green filter (S. aureus). Scale bars are 50 μm.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 0 Not valid · 24 Not checked · 72 Own results and interpretations

60 more claims

Create a free account to see all 96 claims and to verify the 32 references still open.

See all claims — free account
  • It may state two separate claims as one. 20
  • Probably not a substantial claim. 11
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Show all 80 references

Research works printed but not linked: 1

  1. Gopi, S., Thomas, S., and Pius, A. (2020). Chapter 11—Chitin, chitosan, marine to market. Handbook of Chitin and Chitosan, Elsevier.

Cited by

See all 30

Metadata

Authors
Lima, M., Teixeira-Santos, R., Gomes, L. C., Faria, S. I., Valcarcel, J., Vázquez, J. A., Cerqueira, M. A., Pastrana, L., Bourbon, A. I., & Mergulhão, F. J.
Affiliations
  • Universidade do Porto (PT)
  • LEPABE-Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
  • Grupo de Reciclado y Valorización de Materiales Residuales (REVAL), Instituto de Investigaciones Marinas (IIM-CSIC), C/Eduardo Cabello, 6, CP36208 Vigo, Galicia, Spain
  • Instituto de Investigacións Mariñas (ES)
  • International Iberian Nanotechnology Laboratory, Department of Life Sciences, Av. Mestre José Veiga s/n, 4715-330 Braga, Portugal
  • International Iberian Nanotechnology Laboratory (PT)
Corresponding author
Mergulhão, Filipe J.
Venue
Molecules
Publisher
MDPI AG
Published
2021-07-20
Volume
26
Issue
14
Pages
4378
ISSN
1420-3049 (ISSN-L)
OpenAlex
W3183356343
Cited by
30
References
80
Citations by year
2026: 5 · 2025: 7 · 2024: 7 · 2023: 4 · 2022: 5 · 2021: 2
FWCI
1.11
Type
journal article
Language
en
Open access
Locations
  • Molecules (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Zenodo (CERN European Organization for Nuclear Research) (submittedVersion, cc-by)
Funders
  • Base Funding of the Laboratory for Process Engineering, Environment, Biotechnology and Energy (LEPABE) funded by national funds through the FCT/MCTES (PID-DAC) (UIDB/00511/2020)
  • CVMAR+I—Industrial Innovation and Marine Biotechnology Valorization project funded by INTERREG V Espanha Portugal (POCTEP) (0302_CVMAR_I_1_P)
  • SurfSAFE project funded by the European Union’s Horizon 2020 research and innovation programme (No 952471)
  • Xunta de Galicia by Xunta de Galicia (IN607B 2018/2019)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
Keywords
chitosan, chitosan molecular weight, antibiofilm surfaces, Staphylococcus aureus, Pseudomonas aeruginosa, dual-species biofilms, implant-associated infection, biomedical implants, polylactic acid, dip coating, viable but non-culturable bacteria, biofilm inhibition
MeSH terms
Pseudomonas aeruginosa, Staphylococcus aureus, Surface Properties, Biofilms, Implants, Experimental, Chitosan

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-17, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-17 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. https://app.cochat.ai/papers/10.3390/molecules26144378
The paper
Lima, M., Teixeira-Santos, R., Gomes, L. C., Faria, S. I., Valcarcel, J., Vázquez, J. A., Cerqueira, M. A., Pastrana, L., Bourbon, A. I., & Mergulhão, F. J. (2021). Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. Molecules. https://doi.org/10.3390/molecules26144378

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.