The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index; none of the 32 sources its claims cite is checked for support yet.
Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa
Open accessAbstract
Implantable medical devices (IMDs) are susceptible to microbial adhesion and biofilm formation, which lead to several clinical complications, including the occurrence of implant-associated infections. Polylactic acid (PLA) and its composites are currently used for the construction of IMDs. In addition, chitosan (CS) is a natural polymer that has been widely used in the medical field due to its antimicrobial and antibiofilm properties, which can be dependent on molecular weight (Mw). The present study aims to evaluate the performance of CS-based surfaces of different Mw to inhibit bacterial biofilm formation. For this purpose, CS-based surfaces were produced by dip-coating and the presence of CS and its derivatives onto PLA films, as well surface homogeneity were confirmed by contact angle measurements, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The antimicrobial activity of the functionalized surfaces was evaluated against single- and dual-species biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. Chitosan-based surfaces were able to inhibit the development of single- and dual-species biofilms by reducing the number of total, viable, culturable, and viable but nonculturable cells up to 79%, 90%, 81%, and 96%, respectively, being their activity dependent on chitosan Mw. The effect of CS-based surfaces on the inhibition of biofilm formation was corroborated by biofilm structure analysis using confocal laser scanning microscopy (CLSM), which revealed a decrease in the biovolume and thickness of the biofilm formed on CS-based surfaces compared to PLA. Overall, these results support the potential of low Mw CS for coating polymeric devices such as IMDs where the two bacteria tested are common colonizers and reduce their biofilm formation.
Overview
CoChat Summary
TL;DR
Chitosan-coated PLA surfaces, especially low-molecular-weight chitosan (CS2 129 kDa and CS3 61 kDa), reduced single- and dual-species biofilms of *Staphylococcus aureus* and *Pseudomonas aeruginosa* in vitro. The coatings decreased total, viable, culturable, and VBNC cells and reduced biofilm biovolume and thickness compared with uncoated PLA.
Key findings
- CS-based surfaces reduced total, viable, culturable, and VBNC cells up to 79%, 90%, 81%, and 96%, respectively, relative to PLA.
- For *S. aureus*, total cells were 33–79% lower than PLA; CS2- and CS3-PLA viable cells were 39% and 20% of the control; culturable cells were 40–51% of the control; VBNC cells were reduced by 21–78%. For *P. aeruginosa*, biofilms on CS-based surfaces showed lower percentages of total (45–66%), viable (10–44%), and culturable (20–46%) cells compared with PLA, and CS2- and CS3-PLA reduced VBNC cells by 93% and 96%.
- In dual-species biofilms, CS-based surfaces showed lower percentages of total (27–53%), viable (11–34%), and culturable (19–66%) cells compared with PLA, and VBNC cells were reduced by more than 94% on CS1-, CS2-, and CS3-PLA.
- CLSM showed that CS2 and CS3 reduced *S. aureus* biovolume and thickness by on average 78% and 65%; CS1 and CS2 reduced *P. aeruginosa* biovolume and thickness by 56% and 50%, while CS3 reduced both by around 66%; dual-species biofilms on CS-based surfaces had on average 57% less biovolume and 48% less thickness than on PLA, with CS3-PLA most efficient.
Methods
- Chitosan was extracted from *Loligo opalescens* squid endoskeletons, depolymerized to β-CS (294 kDa), CS1 (186 kDa), CS2 (129 kDa), and CS3 (61 kDa), and immobilized at 0.5% (w/v) onto plasma-treated PLA films by dip-coating; surfaces were characterized by water contact angle, FTIR, XRD, and SEM.
- Single- and dual-species biofilms of *S. aureus* ATCC 25923 and mCherry-*P. aeruginosa* PAO1 were formed under static conditions at 37 °C for 24 h in 12-well plates; dual-species inocula were mixed 1:1.
- Biofilm cells were quantified by CFU counting, epifluorescence microscopy with Live/Dead staining, and VBNC calculated as viable minus culturable cells; CLSM with SYTO9/mCherry and COMSTAT2 measured biovolume and thickness. Statistical comparisons used Mann-Whitney tests and one-way ANOVA at p < 0.05.
Limitations
- The paper does not state a limitations section.
- Evident from the text: the study is in vitro, uses static 24 h biofilm assays, tests only two reference strains (*S. aureus* ATCC 25923 and *P. aeruginosa* PAO1), uses a single chitosan concentration (0.5% w/v), and reports no in vivo or cytotoxicity/biocompatibility testing of the functionalized surfaces.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
0 Valid · 0 Not valid · 24 Not checked · 72 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“which revealed a decrease in the biovolume and thickness of the biofilm formed on CS-based surfaces compared to PLA”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“CS-PLA surfaces were able to reduce the percentage of total, viable, and culturable P. aeruginosa cells by 55 to 90%.”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 3. Discussion
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the CS molecular weight seems to have an impact on surface morphology. In fact, the presence of small aggregates was more notorious for CS-PLA surfaces with high Mw chitosan”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 3. Discussion
hedgedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“these surfaces presented a lower percentage of total (27–53%), viable (11–34%), and culturable (19–66%) cells compared to PLA (p < 0.05).”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 2. Results > 2.3. Antibiofilm Activity of Functionalized Surfaces
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Data demonstrated that biofilms formed on CS-coated PLA surfaces presented a lower percentage of total, viable and culturable cells than uncoated PLA.”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 3. Discussion
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
60 more claims
Create a free account to see all 96 claims and to verify the 32 references still open.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 11
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 3. Discussion
“CS-PLA surfaces were able to reduce the percentage of total, viable, and culturable P. aeruginosa cells by 55 to 90%.”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 2. Results > 2.3. Antibiofilm Activity of Functionalized Surfaces
“biofilms formed on CS-based surfaces displayed a lower percentage of total (45–66%), viable (10–44%), and culturable (20–46%) cells compared to PLA (p < 0.05).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 3. Discussion
“The analysis of biofilm cell composition showed that CS-based surfaces significantly reduced the number of total, viable, and culturable S. aureus cells by 60 to 80%”
§ Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa > 2. Results > 2.3. Antibiofilm Activity of Functionalized Surfaces
“S. aureus biofilms formed on CS-based surfaces exhibited 33 to 79% fewer total cells than PLA (p < 0.05)”
Citations
Cites
Bacterial Biofilms: A Common Cause of Persistent Infections
Costerton, J. W., Stewart, P. S., & Greenberg, E. P. (1999) · Science · doi:10.1126/science.284.5418.1318 · Cited by 12,167 · cited 1×
“Once adhered to implant surfaces, microorganisms form biofilms, which protect them from the host immune response and the action of antimicrobial agents, contributing to the persistence and spread of infection [15,16].”
BackgroundAntimicrobial properties of chitosan and mode of action: a state of the art review
Kong, M., Chen, X. G., Xing, K., & Park, H. J. (2010) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2010.09.012 · Cited by 3,037
Chitin and Chitosan Preparation from Marine Sources. Structure, Properties and Applications
Younes, I., & Rinaudo, M. (2015) · Marine Drugs · doi:10.3390/md13031133 · Cited by 2,562
Implant infections: adhesion, biofilm formation and immune evasion
Arciola, C. R., Campoccia, D., & Montanaro, L. (2018) · Nature Reviews Microbiology · doi:10.1038/s41579-018-0019-y · Cited by 2,241
Quantification of biofilm structures by the novel computer program comstat
Heydorn, A., Nielsen, A. T., Hentzer, M., Sternberg, C., Givskov, M., Ersbøll, B. K., & Molin, S. (2000) · Microbiology · doi:10.1099/00221287-146-10-2395 · Cited by 2,179
Tande, A. J., & Patel, R. (2014) · Clinical Microbiology Reviews · doi:10.1128/cmr.00111-13 · Cited by 1,885
Recent findings on the viable but nonculturable state in pathogenic bacteria
Oliver, J. D. (2010) · FEMS Microbiology Reviews · doi:10.1111/j.1574-6976.2009.00200.x · Cited by 1,203
Reducing implant-related infections: active release strategies
Hetrick, E. M., & Schoenfisch, M. H. (2006) · Chemical Society Reviews · doi:10.1039/b515219b · Cited by 1,201
Bacterial biofilm formation on implantable devices and approaches to its treatment and prevention
Khatoon, Z., McTiernan, C. D., Suuronen, E. J., Mah, T.-F., & Alarcon, E. I. (2018) · Heliyon · doi:10.1016/j.heliyon.2018.e01067 · Cited by 1,187
Antibacterial action of chitosan and carboxymethylated chitosan
Fei Liu, X., Lin Guan, Y., Zhi Yang, D., Li, Z., & De Yao, K. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010214)79:7<1324::aid-app210>3.0.co;2-l · Cited by 1,178
Antibacterial action of chitosan
Sudarshan, N. R., Hoover, D. G., & Knorr, D. (1992) · Food Biotechnology · doi:10.1080/08905439209549838 · Cited by 1,001
The importance of the viable but non-culturable state in human bacterial pathogens
Li, L., Mendis, N., Trigui, H., Oliver, J. D., & Faucher, S. P. (2014) · Frontiers in Microbiology · doi:10.3389/fmicb.2014.00258 · Cited by 976
Zheng, S., Bawazir, M., Dhall, A., Kim, H.-E., He, L., Heo, J., & Hwang, G. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.643722 · Cited by 872
da Silva, D., Kaduri, M., Poley, M., Adir, O., Krinsky, N., Shainsky-Roitman, J., & Schroeder, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.010 · Cited by 863
Yi, H., Wu, L.-Q., Bentley, W. E., Ghodssi, R., Rubloff, G. W., Culver, J. N., & Payne, G. F. (2005) · Biomacromolecules · doi:10.1021/bm050410l · Cited by 759
Device‐Associated Infections: A Macroproblem that Starts with Microadherence
Darouiche, R. O. (2001) · Clinical Infectious Diseases · doi:10.1086/323130 · Cited by 747
Evaluation of different factors affecting antimicrobial properties of chitosan
Hosseinnejad, M., & Jafari, S. M. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.01.022 · Cited by 744
Candida biofilms on implanted biomaterials: a clinically significant problem
Ramage, G., MartÃnez, J. P., & López-Ribot, J. L. (2006) · FEMS Yeast Research · doi:10.1111/j.1567-1364.2006.00117.x · Cited by 575
Antibacterial Activity of Chitosan Nanoparticles: A Review
Chandrasekaran, M., Kim, K., & Chun, S. (2020) · Processes · doi:10.3390/pr8091173 · Cited by 442
Antibacterial characteristics and activity of acid-soluble chitosan
Chung, Y.-C., & Chen, C.-Y. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.06.044 · Cited by 406
The Influence of Surface Modification on Bacterial Adhesion to Titanium-Based Substrates
Lorenzetti, M., Dogša, I., Stošicki, T., Stopar, D., Kalin, M., Kobe, S., & Novak, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507148n · Cited by 365
Antibiotic Discovery: Combatting Bacterial Resistance in Cells and in Biofilm Communities
Penesyan, A., Gillings, M., & Paulsen, I. (2015) · Molecules · doi:10.3390/molecules20045286 · Cited by 363
Filkins, L. M., Graber, J. A., Olson, D. G., Dolben, E. L., Lynd, L. R., Bhuju, S., & O'Toole, G. A. (2015) · Journal of Bacteriology · doi:10.1128/jb.00059-15 · Cited by 346
Tikhonov, V. E., Stepnova, E. A., Babak, V. G., Yamskov, I. A., Palma-Guerrero, J., Jansson, H.-B., Lopez-Llorca, L. V., Salinas, J., Gerasimenko, D. V., Avdienko, I. D., et al. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.10.021 · Cited by 345
Fabrication of super-hydrophobic film from PMMA with intrinsic water contact angle below 90°
Ma, Y., Cao, X., Feng, X., Ma, Y., & Zou, H. (2007) · Polymer · doi:10.1016/j.polymer.2007.10.038 · Cited by 335
Kaya, M., Khadem, S., Cakmak, Y. S., Mujtaba, M., Ilk, S., Akyuz, L., Salaberria, A. M., Labidi, J., Abdulqadir, A. H., & Deligöz, E. (2018) · RSC Advances · doi:10.1039/c7ra12070b · Cited by 322
Antibacterial mechanism of chitosan microspheres in a solid dispersing system against E. coli
Kong, M., Chen, X. G., Liu, C. S., Liu, C. G., Meng, X. H., & Yu, L. J. (2008) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2008.04.003 · Cited by 317
Surface modifications for antimicrobial effects in the healthcare setting: a critical overview
Adlhart, C., Verran, J., Azevedo, N. F., Olmez, H., Keinänen-Toivola, M. M., Gouveia, I., Melo, L. F., & Crijns, F. (2018) · Journal of Hospital Infection · doi:10.1016/j.jhin.2018.01.018 · Cited by 308
Implantable Device-Related Infection
VanEpps, J. S., & Younger, J. G. (2016) · Shock · doi:10.1097/shk.0000000000000692 · Cited by 306
Biopolymers in Medical Implants: A Brief Review
Rebelo, R., Fernandes, M., & Fangueiro, R. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.07.034 · Cited by 259
Di Ciccio, P., Vergara, A., Festino, A. R., Paludi, D., Zanardi, E., Ghidini, S., & Ianieri, A. (2015) · Food Control · doi:10.1016/j.foodcont.2014.10.048 · Cited by 252
Biomedical Applications of Poly(Lactic Acid)
P. Pawar, R., U. Tekale, S., U. Shisodia, S., T. Totre, J., & J. Domb, A. (2014) · Recent Patents on Regenerative Medicine · doi:10.2174/2210296504666140402235024 · Cited by 248
Peng, Z.-X., Wang, L., Du, L., Guo, S.-R., Wang, X.-Q., & Tang, T.-T. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.02.008 · Cited by 238
Hybrid gels: Influence of oleogel/hydrogel ratio on rheological and textural properties
Martins, A. J., Silva, P., Maciel, F., Pastrana, L. M., Cunha, R. L., Cerqueira, M. A., & Vicente, A. A. (2019) · Food Research International · doi:10.1016/j.foodres.2018.10.019 · Cited by 227
Self-citationMolecular weight manipulation of chitosan I: kinetics of depolymerization by nitrous acid
Allan, G. G., & Peyron, M. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(95)00207-a · Cited by 214
Synthesis and characterization of chitosan derivatives with dual-antibacterial functional groups
Li, Z., Yang, F., & Yang, R. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.01.056 · Cited by 199
Synthesis and surface modification of polyurethanes with chitosan for antibacterial properties
Kara, F., Aksoy, E. A., Yuksekdag, Z., Hasirci, N., & Aksoy, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.019 · Cited by 175
Baldan, R., Cigana, C., Testa, F., Bianconi, I., De Simone, M., Pellin, D., Di Serio, C., Bragonzi, A., & Cirillo, D. M. (2014) · PLoS ONE · doi:10.1371/journal.pone.0089614 · Cited by 163
A high-accuracy polynomial fitting approach to determine contact angles
Bateni, A., Susnar, S. S., Amirfazli, A., & Neumann, A. W. (2003) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(03)00053-0 · Cited by 153
Optimal routine conditions for the determination of the degree of acetylation of chitosan by 1H-NMR
Fernández-Megía, E., Novoa-Carballal, R., Quiñoá, E., & Riguera, R. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.04.006 · Cited by 151
Antimicrobial strategies for urinary catheters
Zhu, Z., Wang, Z., Li, S., & Yuan, X. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36561 · Cited by 137
Device-Related Infections: A Review
Vinh, D. C., & Embil, J. M. (2005) · Journal of Long-Term Effects of Medical Implants · doi:10.1615/jlongtermeffmedimplants.v15.i5.20 · Cited by 131
Focal Controlled Drug Delivery
Domb, A. J., & Khan, W. (2014) · Advances in delivery science and technology · doi:10.1007/978-1-4614-9434-8 · Cited by 122
Preventing Implant-Associated Infections by Silver Coating
Küehl, R., Brunetto, P. S., Woischnig, A.-K., Varisco, M., Rajacic, Z., Vosbeck, J., Terracciano, L., Fromm, K. M., & Khanna, N. (2016) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.02934-15 · Cited by 117
Zhang, X., Zhang, Q., Yan, T., Jiang, Z., Zhang, X., & Zuo, Y. Y. (2015) · Environmental Science & Technology · doi:10.1021/es5050425 · Cited by 115
Roles of Chitosan in Green Synthesis of Metal Nanoparticles for Biomedical Applications
Phan, T. T. V., Phan, D. T., Cao, X. T., Huynh, T.-C., & Oh, J. (2021) · Nanomaterials · doi:10.3390/nano11020273 · Cited by 108
Scaffaro, R., Lopresti, F., Marino, A., & Nostro, A. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9220-1 · Cited by 98
Chitosan coating as an antibacterial surface for biomedical applications
D’Almeida, M., Attik, N., Amalric, J., Brunon, C., Renaud, F., Abouelleil, H., Toury, B., & Grosgogeat, B. (2017) · PLoS ONE · doi:10.1371/journal.pone.0189537 · Cited by 93
Cerium, chitosan and hamamelitannin as novel biofilm inhibitors?
Cobrado, L., Azevedo, M. M., Silva-Dias, A., Ramos, J. P., Pina‐Vaz, C., & Rodrigues, A. G. (2012) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dks007 · Cited by 92
Gomes, L. C., Silva, L. N., Simões, M., Melo, L. F., & Mergulhão, F. J. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35277 · Cited by 90
Self-citationCobrado, L., Silva-Dias, A., Azevedo, M. M., Pina‐Vaz, C., & Rodrigues, A. G. (2012) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dks376 · Cited by 88
Cerioli, M., Batailler, C., Conrad, A., Roux, S., Perpoint, T., Becker, A., Triffault-Fillit, C., Lustıg, S., Fessy, M.-H., Laurent, F. J., et al. (2020) · Frontiers in Medicine · doi:10.3389/fmed.2020.513242 · Cited by 81
Κ-carrageenan/chitosan nanolayered coating for controlled release of a model bioactive compound
Pinheiro, A. C., Bourbon, A. I., Quintas, M. A. C., Coimbra, M. A., & Vicente, A. A. (2012) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2012.06.004 · Cited by 80
Self-citationStetsyshyn, Y., Raczkowska, J., Harhay, K., Gajos, K., Melnyk, Y., Dąbczyński, P., Shevtsova, T. V., & Budkowski, A. (2020) · Colloid & Polymer Science · doi:10.1007/s00396-020-04750-0 · Cited by 79
Strength of bacterial adhesion on nanostructured surfaces quantified by substrate morphometry
Spengler, C., Nolle, F., Mischo, J., Faidt, T., Grandthyll, S., Thewes, N., Koch, M., Müller, F., Bischoff, M., Klatt, M. A., et al. (2019) · Nanoscale · doi:10.1039/c9nr04375f · Cited by 76
Novel procedure to enhance PLA surface properties by chitosan irreversible immobilization
Stoleru, E., Dumitriu, R. P., Munteanu, B. S., Zaharescu, T., Tãnase, E. E., Miteluț, A. C., Ailiesei, G. L., & Vasile, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.01.200 · Cited by 72
Crémet, L., Broquet, A. H., Brulin, B., Jacqueline, C., Dauvergne, S., Brion, R., Asehnoune, K., Corvec, S., Heymann, D., & Caroff, N. (2015) · Pathogens and Disease · doi:10.1093/femspd/ftv065 · Cited by 66
Chitosan-Based Ultrathin Films as Antifouling, Anticoagulant and Antibacterial Protective Coatings
Bulwan, M., Wójcik, K., Zapotoczny, S., & Nowakowska, M. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050611x601711 · Cited by 65
Renz, N., Trebše, R., Akgün, D., Perka, C., & Trampuž, A. (2019) · BMC Infectious Diseases · doi:10.1186/s12879-019-4691-y · Cited by 62
Vázquez, J. A., Noriega, D., Ramos, P., Valcárcel, J., Novoa-Carballal, R., Pastrana, L. M., Reis, R. L., & Pérez‐Martín, R. I. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.070 · Cited by 59
Self-citationAlves, P., Gomes, L. C., Vorobii, M., Rodriguez‐Emmenegger, C., & Mergulhão, F. J. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.110976 · Cited by 48
Self-citationCampana, R., Casettari, L., Ciandrini, E., Illum, L., & Baffone, W. (2017) · International Journal of Antimicrobial Agents · doi:10.1016/j.ijantimicag.2017.03.031 · Cited by 47
Inhibition of mixed fungal and bacterial biofilms on silicone by carboxymethyl chitosan
Tan, Y., Leonhard, M., Moser, D., Ma, S., & Schneider‐Stickler, B. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.08.061 · Cited by 46
Study on Different Molecular Weights of Chitosan as an Immobilization Matrix for a Glucose Biosensor
Ang, L. F., Por, L. Y., & Yam, M. F. (2013) · PLoS ONE · doi:10.1371/journal.pone.0070597 · Cited by 45
Dynamics of Chitosan by 1H NMR Relaxation
Novoa-Carballal, R., Fernández-Megía, E., & Riguera, R. (2010) · Biomacromolecules · doi:10.1021/bm100447f · Cited by 44
Julkapli, N. M., Ahmad, Z., Akil, H. M., & Bin Mohamed, A. A. (2010) · AIP Conference Proceedings · doi:10.1063/1.3295578 · Cited by 44
Yu, J., Jiang, F., Zhang, F., Hamushan, M., Du, J., Mao, Y., Wang, Q., Han, P., Tang, J. L., & Shen, H. (2021) · Frontiers in Microbiology · doi:10.3389/fmicb.2021.687888 · Cited by 44
Implant-Associated Infections: A Review of the Safety of Cardiac Implants
Kandi, V., & Vadakedath, S. (2020) · Cureus · doi:10.7759/cureus.12267 · Cited by 43
Gafri, H. F. S., Zuki, F. M., Aroua, M. K., & Hashim, N. A. (2018) · Reviews in Chemical Engineering · doi:10.1515/revce-2017-0006 · Cited by 42
Use of Gamma Radiation Techniques in Peaceful Applications
Almayah, B. A. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.78481 · Cited by 40
Lishchynskyi, O., Stetsyshyn, Y., Raczkowska, J., Awsiuk, K., Orzechowska, B., Abalymov, A., Skirtach, A. G., Bernasik, A., Nastyshyn, S., & Budkowski, A. (2021) · Materials · doi:10.3390/ma14061417 · Cited by 40
Costa, M. J., Pastrana, L. M., Teixeira, J. A., Sillankorva, S., & Cerqueira, M. Â. (2021) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2021.102646 · Cited by 39
Self-citationLiao, H., Jiang, L., & Zhang, R. (2018) · FEMS Microbiology Letters · doi:10.1093/femsle/fnx249 · Cited by 38
Chitosans as new tools against biofilms formation on the surface of silicone urinary catheters
Campana, R., Biondo, F., Mastrotto, F., Baffone, W., & Casettari, L. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.07.088 · Cited by 34
An integral and sustainable valorisation strategy of squid pen by-products
Vázquez, J. A., Ramos, P., Valcárcel, J., Antelo, L. T., Novoa-Carballal, R., Reis, R. L., & Pérez‐Martín, R. I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.316 · Cited by 34
Self-citationGomes, L. C., Deschamps, J., Briandet, R., & Mergulhão, F. J. (2018) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2018.04.017 · Cited by 30
Self-citationActive bi-layer cellulose-based films: Development and characterization
Martins, V. D. F., Cerqueira, M. A., Fuciños, P., Garrido-Maestu, A., Curto, J. M. R., & Pastrana, L. M. (2018) · Cellulose · doi:10.1007/s10570-018-2021-y · Cited by 27
Self-citationCardoso, E. C. L., Parra, D. F., Scagliusi, S. R., Sales, R. M., Caviquioli, F., & Lugão, A. B. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.85462 · Cited by 24
Chitosan-based coatings in the prevention of intravascular catheter-associated infections
Mendoza, G., Regiel-Futyra, A., Tamayo, A. E., Monzón, M., Irusta, S., de Gregorio, M. Á., Kyzioł, A., & Arruebo, M. (2017) · Journal of Biomaterials Applications · doi:10.1177/0885328217739199 · Cited by 23
(2019) · e-space (Manchester Metropolitan University)
Research works printed but not linked: 1
- Gopi, S., Thomas, S., and Pius, A. (2020). Chapter 11—Chitin, chitosan, marine to market. Handbook of Chitin and Chitosan, Elsevier.
Cited by
Recent Advances in Antibacterial Coatings to Combat Orthopedic Implant-Associated Infections
Akay, Ş., & Yaghmur, A. (2024) · Molecules · doi:10.3390/molecules29051172 · Cited by 104
Carvalho, F. M., Mergulhão, F. J., & Gomes, L. C. (2021) · Antibiotics · doi:10.3390/antibiotics10121525 · Cited by 48
Self-citationTouati, A., Ibrahim, N. A., & Idres, T. (2025) · Pathogens · doi:10.3390/pathogens14040386 · Cited by 43
Carrillo-Lomelí, D. A., Cerqueira, M. Â., Moo‐Huchin, V. M., Bourbon, A. I., Souza, V. G. L., Cardama, A. L., Pastrana, L. M., Fuentes, Y. M. O., Hernández-Castillo, F. D., Villarreal-Quintanilla, J. ́., et al. (2024) · Scientia Horticulturae · doi:10.1016/j.scienta.2024.113224 · Cited by 26
Self-citationPan, M., Xu, Z., Luo, W., Yang, Y., Teng, T., Lin, J., & Huang, H. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110088 · Cited by 23
Metadata
- Authors
- Lima, M., Teixeira-Santos, R., Gomes, L. C., Faria, S. I., Valcarcel, J., Vázquez, J. A., Cerqueira, M. A., Pastrana, L., Bourbon, A. I., & Mergulhão, F. J.
- Affiliations
- Universidade do Porto (PT)
- LEPABE-Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- Grupo de Reciclado y Valorización de Materiales Residuales (REVAL), Instituto de Investigaciones Marinas (IIM-CSIC), C/Eduardo Cabello, 6, CP36208 Vigo, Galicia, Spain
- Instituto de Investigacións Mariñas (ES)
- International Iberian Nanotechnology Laboratory, Department of Life Sciences, Av. Mestre José Veiga s/n, 4715-330 Braga, Portugal
- International Iberian Nanotechnology Laboratory (PT)
- Corresponding author
- Mergulhão, Filipe J.
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2021-07-20
- Volume
- 26
- Issue
- 14
- Pages
- 4378
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC8306285
- OpenAlex
- W3183356343
- Cited by
- 30
- References
- 80
- Citations by year
- 2026: 5 · 2025: 7 · 2024: 7 · 2023: 4 · 2022: 5 · 2021: 2
- FWCI
- 1.11
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Zenodo (CERN European Organization for Nuclear Research) (submittedVersion, cc-by)
- Funders
- Base Funding of the Laboratory for Process Engineering, Environment, Biotechnology and Energy (LEPABE) funded by national funds through the FCT/MCTES (PID-DAC) (UIDB/00511/2020)
- CVMAR+I—Industrial Innovation and Marine Biotechnology Valorization project funded by INTERREG V Espanha Portugal (POCTEP) (0302_CVMAR_I_1_P)
- SurfSAFE project funded by the European Union’s Horizon 2020 research and innovation programme (No 952471)
- Xunta de Galicia by Xunta de Galicia (IN607B 2018/2019)
- Topics
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Keywords
- chitosan, chitosan molecular weight, antibiofilm surfaces, Staphylococcus aureus, Pseudomonas aeruginosa, dual-species biofilms, implant-associated infection, biomedical implants, polylactic acid, dip coating, viable but non-culturable bacteria, biofilm inhibition
- MeSH terms
- Pseudomonas aeruginosa, Staphylococcus aureus, Surface Properties, Biofilms, Implants, Experimental, Chitosan
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-17, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-17 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.