Computational Study of Heat Transfer inside Different PCMs Enhanced by Al2O3 Nanoparticles in a Copper Heat Sink at High Heat Loads
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
The cooling of electronic elements is one of the most important problems in the development of architecture in electronic technology. One promising developing cooling method is heat sinks based on the phase change materials (PCMs) enhanced by nano-sized solid particles. In this paper, the influence of the PCM’s physical properties and the concentration of nanoparticles on heat and mass transfer inside a closed radiator with fins, in the presence of a source of constant volumetric heat generation, is analyzed. The conjugate problem of nano-enhanced phase change materials (NePCMs) melting is considered, taking into account natural convection in the melt under the impact of the external convective cooling. A two-dimensional problem is formulated in the non-primitive variables, such as stream function and vorticity. A single-phase nano-liquid model is employed to describe the transport within NePCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Comparison of obtained numerical data (solid line) and experimental data (dots) [29].](https://figures.cochat.ai/paper-figures/504d915e611544d9bc0f2abe4289ee8b/computational-study-of-heat-transfer-inside-different-pcms-enhanced-by-al2o3-figure-2.jpg)








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The lauric acid had the lowest temperature heat sink after four minutes, making it the best choice.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“NPs reduced latent heat, accelerated the melting process, and reduced the overall heat capacity.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“As a result of this, NPs only enhanced the system up to 2% concentration, which was determined to be the best concentration [80].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“Since n-octadecane has the lowest melting point, it started melting first; however, since it melted quickly, it only cooled for a short amount of time.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
The cited source says what the claim attributes to it.
In the citing paper
“NPs enhanced up to 2% concentration”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [80]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,090
A new thermal conductivity model for nanofluids
Koo, J., & Kleinstreuer, C. (2004) · Journal of Nanoparticle Research · doi:10.1007/s11051-004-3170-5 · Cited by 1,052 · cited 1×
“In this study, the thermal conductivity model [39] for nanofluids, which takes into account the influence of particle size, concentration, and base fluid properties, was used.”
MethodVajjha, R. S., & Das, D. K. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.06.027 · Cited by 908 · cited 2×
“In [40], the new empirical correlations for β and f(T,Φ) were obtained experimentally considering nanoparticles of Al2O3, ZnO, and CuO.”
MethodMelting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655 · cited 2×
“Comparison of obtained numerical data (solid line) and experimental data (dots) [29].”
BackgroundResultExperimental study of using PCM in brick constructive solutions for passive cooling
Castell, A., Martorell, I., Medrano, M., Pérez, G., & Cabeza, L. F. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2009.10.022 · Cited by 549
Increasing the efficiency of PV panel with the use of PCM
Stropnik, R., & Stritih, U. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.06.011 · Cited by 467
Vajjha, R. S., Das, D. K., & Namburu, P. K. (2010) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2010.02.016 · Cited by 432
Leong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Hosseinizadeh, S. F., Tan, F. L., & Moosania, S. M. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.07.031 · Cited by 336 · cited 1×
“Aluminum oxide (nanoparticles) (d = 59 × 10−9 m) [34] 36 765 3600 7.”
Lee, K. O., Medina, M. A., Raith, E., & Sun, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.003 · Cited by 318
Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins
Atkin, P., & Farid, M. M. (2015) · Solar Energy · doi:10.1016/j.solener.2015.01.037 · Cited by 309
Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM
Al-Waeli, A. H. A., Chaichan, M. T., Sopian, K., Kazem, H. A., Mahood, H. B., & Khadom, A. A. (2019) · Solar Energy · doi:10.1016/j.solener.2018.11.016 · Cited by 306
Hosseini, M. J., Ranjbar, A. A., Sedighi, K., & Rahimi, M. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.07.028 · Cited by 295
Evola, G., Marletta, L., & Sicurella, F. (2013) · Building and Environment · doi:10.1016/j.buildenv.2012.09.021 · Cited by 269
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.057 · Cited by 221
Ashraf, M. J., Ali, H. M., Usman, H., & Arshad, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.114 · Cited by 196 · cited 2×
“This is evidenced by the studies devoted to the analysis of the influence of the PCM melting point on the efficiency of using heat sink [22,23].”
BackgroundMethodSheikholeslami, M., Lohrasbi, S., & Ganji, D. D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.158 · Cited by 185
Ho, C. J., & Gao, J. Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.065 · Cited by 183
Nano-PCM filled energy storage system for solar-thermal applications
Al-Jethelah, M., Tasnim, S. H., Mahmud, S., & Dutta, A. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.02.119 · Cited by 160 · cited 1×
“In [15], thermal energy storage based on coconut oil with CuO nanoparitcles was analyzed.”
MethodHeat transfer studies of building brick containing phase change materials
Kant, K., Shukla, A., & Sharma, A. (2017) · Solar Energy · doi:10.1016/j.solener.2017.07.072 · Cited by 144
Bondareva, N. S., Buonomo, B., Manca, O., & Sheremet, M. А. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.045 · Cited by 142
Self-citationHeat transfer inside cooling system based on phase change material with alumina nanoparticles
Bondareva, N. S., Buonomo, B., Manca, O., & Sheremet, M. А. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.002 · Cited by 132
Self-citationAbdelrahman, H. E., Wahba, M. H., Refaey, H. A., Moawad, M., & Berbish, N. S. (2018) · Solar Energy · doi:10.1016/j.solener.2018.11.022 · Cited by 131
Kibria, M. A., Saidur, R., Al‐Sulaiman, F. A., & Aziz, M. M. A. (2015) · Solar Energy · doi:10.1016/j.solener.2015.11.027 · Cited by 126
Bondareva, N. S., & Sheremet, M. А. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.040 · Cited by 126
Self-citationA parametric study of phase change material (PCM)-based heat sinks
Wang, X., Yap, C., & MUJUMDAR, A. S. (2007) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2007.07.016 · Cited by 119 · cited 1×
“In [24], three different PCMs in finned heat sink were considered.”
BackgroundFan, L., Xiao, Y., Zeng, Y. D., Fang, X., Wang, X., Xu, X., Yu, Z., Hong, R.-H., Hu, Y.-C., & Cen, K. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.03.015 · Cited by 113 · cited 2×
“In [23], the performance of an alumina heat sink with two different PCMs, namely, n-eicosane and 1-hexadecanol, was studied.”
BackgroundMethodMartyushev, S. G., & Sheremet, M. А. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.02.009 · Cited by 92
Self-citationHuang, H., Wang, Z., Zhang, H., Dou, B., Huang, X., Liang, H., & Goula, M. A. (2018) · Solar Energy · doi:10.1016/j.solener.2018.11.004 · Cited by 77
Li, W., Zhang, D., Jing, T., Gao, M., Liu, P., He, G., & Qin, F. (2018) · Energy · doi:10.1016/j.energy.2018.09.147 · Cited by 72
Bondareva, N. S., & Sheremet, M. А. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.06.050 · Cited by 69
Self-citationMotahar, S., Alemrajabi, A. A., & Khodabandeh, R. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.01.109 · Cited by 65 · cited 1×
“In experimental study [13], the melting of n-octadecane with TiO2 nanoparticles (titanium oxide) inside the rectangular cavity heated from the side wall at a constant heat flux and thermally insulated on other sides was considered.”
BackgroundBondareva, N. S., & Sheremet, M. А. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.108 · Cited by 61
Self-citationBondareva, N. S., & Sheremet, M. А. (2019) · Nanomaterials · doi:10.3390/nano10010017 · Cited by 49
Self-citation3D natural convection melting in a cubical cavity with a heat source
Bondareva, N. S., & Sheremet, M. А. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.01.021 · Cited by 42 · cited 1×
“A study of the melting of n-octadecane in the cubic cavity (see [33]) showed that the isotherms in the middle cross section of the cube slightly differ from the two-dimensional model, while neglecting differences can be found in the flow structures for 2D and 3D models.”
BackgroundSelf-citationFadl, M., & Eames, P. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.761 · Cited by 42
Elsayed, A. O. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.09.008 · Cited by 35 · cited 1×
“The effect of adding nanoparticles depends on many factors, including the thermal and geometric properties of the system, as well as the thermophysical properties of the materials [17].”
Background(2016) · International Journal of Renewable Energy Research · doi:10.20508/ijrer.v6i1.3211.g6846 · Cited by 20
Influence of uniform magnetic field on laminar regimes of natural convection in an enclosure
Bondareva, N. S., & Sheremet, M. А. (2015) · Thermophysics and Aeromechanics · doi:10.1134/s0869864315020079 · Cited by 17
Self-citationLatent energy storage: Melting process around heating cylinders
Kousksou, T., Mahdaoui, M., Hlimi, M., Alaiji, R. E., & Rhafiki, T. E. (2016) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2016.06.010 · Cited by 15
Experimental and numerical investigation of a phase change energy storage system
Casano, G., & Piva, S. (2014) · Journal of Physics Conference Series · doi:10.1088/1742-6596/501/1/012012 · Cited by 6
Cited by
Chu, Y.-M., Yadav, D., Shafee, A., Li, Z., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114121 · Cited by 240
Improving solar cooker performance using phase change materials: A comprehensive review
Omara, A. A. M., Abuelnuor, A. A. A., Mohammed, H. A., Habibi, D., & Younis, O. (2020) · Solar Energy · doi:10.1016/j.solener.2020.07.015 · Cited by 128
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“As a result of this, NPs only enhanced the system up to 2% concentration, which was determined to be the best concentration [80].”
BackgroundMethodInfluentialMaleki, H., Ashrafi, M., Ilghani, N. Z., Goodarzi, M., & Muhammad, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103310 · Cited by 102
Korti, A. I. N., & Guellil, H. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101726 · Cited by 91
Metadata
- Authors
- Bondareva, N. S., Gibanov, N. S., & Sheremet, M. A.
- Affiliations
- National Research Tomsk State University (RU)
- Laboratory on Convective Heat and Mass Transfer, Tomsk State University, Tomsk 634050, Russia
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2020-02-07
- Volume
- 10
- Issue
- 2
- Pages
- 284
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC7075241
- OpenAlex
- W3004691320
- Cited by
- 46
- References
- 41
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 4 · 2023: 5 · 2022: 8 · 2021: 13 · 2020: 7
- FWCI
- 4.06
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- the Grants Council (under the President of the Russian Federation (MK-1934.2019.1)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Nanofluid Flow and Heat Transfer
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- phase change materials, Al2O3 nanoparticles, copper heat sink, electronics cooling, melting, natural convection, nanoparticle concentration, conjugate heat transfer, stream function-vorticity formulation, high heat load
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.