The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
High Sensitivity Resists for EUV Lithography: A Review of Material Design Strategies and Performance Results
Open accessAbstract
The need for decreasing semiconductor device critical dimensions at feature sizes below the 20 nm resolution limit has led the semiconductor industry to adopt extreme ultra violet (EUV) lithography with exposure at 13.5 nm as the main next generation lithographic technology. The broad consensus on this direction has triggered a dramatic increase of interest on resist materials of high sensitivity especially designed for use in the EUV spectral region in order to meet the strict requirements needed for overcoming the source brightness issues and securing the cost efficiency of the technology. To this direction both fundamental studies on the radiation induced chemistry in this spectral area and a plethora of new ideas targeting at the design of new highly sensitive and top performing resists have been proposed. Besides the traditional areas of acid-catalyzed chemically amplified resists and the resists based on polymer backbone breaking new unconventional ideas have been proposed based on the insertion of metal compounds or compounds of other highly absorbing at EUV atoms in the resist formulations. These last developments are reviewed here. Since the effort targets to a new understanding of electron-induced chemical reactions that dominate the resist performance in this region these last developments may lead to unprecedented changes in lithographic technology but can also strongly affect other scientific areas where electron-induced chemistry plays a critical role.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Radiation Chemistry in Chemically Amplified Resists
Kozawa, T., & Tagawa, S. (2010) · Japanese Journal of Applied Physics · doi:10.1143/jjap.49.030001 · Cited by 360
Review of recent advances in inorganic photoresists
Luo, C., Xu, C., Lv, L., Li, H., Huang, X., & Liu, W. (2020) · RSC Advances · doi:10.1039/c9ra08977b · Cited by 207
Photolithographic properties of tin-oxo clusters using extreme ultraviolet light (13.5nm)
Cardineau, B., Del Re, R., Marnell, M., Al-Mashat, H., Vockenhuber, M., Ekinci, Y., Sarma, C., Freedman, D. A., & Brainard, R. L. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.04.024 · Cited by 202
Metal–organic framework-inspired metal-containing clusters for high-resolution patterning
Xu, H., Sakai, K., Kasahara, K., Kosma, V., Yang, K., Herbol, H. C., Odent, J., Clancy, P., Giannelis, E. P., & Ober, C. K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01573 · Cited by 129
Integrated fab process for metal oxide EUV photoresist
Grenville, A., Anderson, J. T., Clark, B. L., De Schepper, P., Edson, J., Greer, M., Jiang, K., Kocsis, M., Meyers, S. T., Stowers, J. K., et al. (2015) · SPIE Proceedings · doi:10.1117/12.2086006 · Cited by 90
Development of an inorganic photoresist for DUV, EUV, and electron beam imaging
Trikeriotis, M., Bae, W. J., Schwartz, E., Krysak, M., Lafferty, N., Xie, P., Smith, B., Zimmerman, P. A., Ober, C. K., & Giannelis, E. P. (2010) · SPIE Proceedings · doi:10.1117/12.846672 · Cited by 78
Tiwale, N., Subramanian, A., Kisslinger, K., Lu, M., Kim, J., Stein, A., & Nam, C.-Y. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc02974e · Cited by 78 · cited 1×
“Different approaches are proposed to address these drawbacks and even recently it was a reported a new approach for enhancing PMMA pattern transfer performance through an infiltration process resulting in the formation of an AlOx film on top of the PMMA resist film [88].”
BackgroundA new inorganic EUV resist with high-etch resistance
Trikeriotis, M., Krysak, M., Chung, Y. S., Ouyang, C., Cardineau, B., Brainard, R., Ober, C. K., Giannelis, E. P., & Cho, K. (2012) · SPIE Proceedings · doi:10.1117/12.916384 · Cited by 75 · cited 2×
“Nanomaterials 2020, 10, x FOR PEER REVIEW 17 of 24 Inorganic [97,98] Nanoparticles 26 nm 4.2 mJ/cm2 - Inorganic [101] Clusters 18 nm 350 mJ/cm2 - Organometallic [102] Molecular 35 nm 5.6 mJ/cm2 - Organometallic [103] Complexes 30 nm 90 mJ/cm2 5.5 nm Metal [104] - 17 nm 7 mJ/cm2 5.6 nm Metal oxide [105] - 13 nm 35 mJ/c…”
BackgroundInfluentialMattson, E. C., Cabrera, Y., Rupich, S. M., Wang, Y., Oyekan, K. A., Mustard, T. J., Halls, M. D., Bechtel, H. A., Martin, M. C., & Chabal, Y. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03149 · Cited by 66
Mechanistic insights in Zr-and Hf-based molecular hybrid EUV photoresists
Wu, L., Baljozovic, M., Portale, G., Kazazis, D., Vockenhuber, M., Jung, T., Ekinci, Y., & Castellanos Ortega, S. (2019) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.jmm.18.1.013504 · Cited by 49
Cited by
Trends in photoresist materials for extreme ultraviolet lithography: A review
Wang, X., Tao, P., Wang, Q., Zhao, R., Liu, T., Hu, Y., Hu, Z., Wang, Y., Wang, J., Tang, Y., et al. (2023) · Materials Today · doi:10.1016/j.mattod.2023.05.027 · Cited by 222
Extreme ultraviolet lithography
Kazazis, D., Santaclara, J. G., van Schoot, J., Mochi, I., & Ekinci, Y. (2024) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00361-z · Cited by 149
Lim, G., Lee, K., Choi, S., & Yoon, H. J. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215307 · Cited by 106
Advanced lithography materials: From fundamentals to applications
Zhang, Y., Yu, H., Wang, L., Wu, X., He, J., Huang, W., Ouyang, C., Chen, D., & Keshta, B. E. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103197 · Cited by 72
UV and VUV-induced fragmentation of tin-oxo cage ions
Haitjema, J., Wu, L., Giuliani, A., Nahon, L., Castellanos, S., & Brouwer, A. M. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp03148a · Cited by 36
Metadata
- Authors
- Manouras, T., & Argitis, P.
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2020-08-14
- Volume
- 10
- Issue
- 8
- Pages
- 1593
- ISSN
- 2079-4991 (ISSN-L)
- OpenAlex
- W3049550538
- Cited by
- 196
- References
- 11
- FWCI
- 5.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High Sensitivity Resists for EUV Lithography: A Review of Material Design Strategies and Performance Results. https://app.cochat.ai/papers/10.3390/nano10081593
- The paper
- Manouras, T., & Argitis, P. (2020). High Sensitivity Resists for EUV Lithography: A Review of Material Design Strategies and Performance Results. Nanomaterials. https://doi.org/10.3390/nano10081593
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.