The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index; 14 of the 72 sources its claims cite were checked for support.
Extreme ultraviolet lithography
Open accessOverview
CoChat Summary
TL;DR
This Primer reviews extreme ultraviolet lithography (EUVL) at 13.5 nm, covering source/optics/scanner technology, photoresist platforms, metrology, pattern transfer, and applications in advanced semiconductor manufacturing. It highlights progress toward high-NA (0.55) systems and persistent stochastic/resist challenges.
Key findings
- EUVL uses a 13.5 nm wavelength; modern high-volume manufacturing scanners have NA 0.33, while high-NA 0.55 systems are expected for R&D in 2024–2025 and HVM in 2025–2026, pushing resolution below 10 nm half pitch. Hyper-NA (0.75) is being investigated theoretically for potential use beyond 2035.
- EUV sources use laser-produced plasma from tin droplets; modern tools operate at 250 W, 600 W has been demonstrated, and 800 W is expected with further development. Free electron laser sources at 1 kW have been proposed but need further research before industrial adoption.
- Photoresist platforms include chemically amplified resists (CARs), molecular glass resists, non-chemically amplified resists, and metal-containing resists such as metal oxide resists (MORs). CARs meet 0.33 NA EUVL requirements and are used in HVM, but MORs are promising because they avoid photoacid diffusion and are less prone to stochastic effects.
- Research tools have demonstrated high resolution: the BMET 0.5 NA tool reached 8 nm half pitch using frequency doubling, and EUV interference lithography demonstrated sub-10 nm half pitch and, more recently, 5 nm resolution. Applications include finFET, gate-all-around/nanosheet, complementary FET, and DRAM devices.
Methods
- This is a narrative Primer/review, not a primary experimental study; it synthesizes literature on EUVL principles, scanner components, exposure tools, photoresists, metrology, pattern transfer, applications, reproducibility, limitations, and outlook.
- No new sample, dataset, or systematic analysis is described; figures include adapted SEM images, process windows, contrast curves, and throughput curves from cited sources.
- Author contributions list all authors for each section; competing interests state that two authors are ASML employees, which has commercial interest in EUVL.
Limitations
- The paper states EUVL challenges including stochastic effects and photon shot noise, the resolution–LWR–sensitivity trade-off, high-NA depth-of-focus constraints requiring 35 nm focus control, mask 3D effects, pellicle transmission limits, infrastructure costs, and sustainability concerns; BEUV, FEL sources, and MOR stability require further research.
- The paper states a scope limitation: it is beyond the Primer’s scope to lay out details of each EUV resist platform.
- Evident from the text: as a review/Primer, it presents no primary data, no systematic search or meta-analysis, and its quantitative examples are drawn from cited literature and adapted figures; the ASML competing interests may shape perspective.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
9 Valid · 11 Not valid · 40 Not checked · 57 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“To overcome the 3D mask effect, both low refractive index (low -n ) and high extinction coefficient (high -k ) masks have been proposed 10 9 -112 .”
What the sources say
- Not checked — no full text of the sourcecites [109] Kovalevich, T., Van Look, L., Franke, J.-H. & Philipsen, V. Evaluation of lines and spaces printing and general understanding of imaging with dark field low-n mask. J. Micro Nanopattern. Mater. Metrol. 22, 024401 (2023). source
- Partly supportedcites [110] Thakare, D., Delabie, A. & Philipsen, V. Optimizing extreme ultraviolet lithography imaging metrics as a function of absorber thickness and illumination source: a simulation case study of Ta-Co alloy. J. Micro Nanopattern. Mater. Metrol. 22, 033201 (2023). sourceExperimental — accuracy not yet measured
The Introduction (page not provided) discusses high-k absorbers and identifies Ta-Co as a prospective high-k mask absorber; the Results also describe Ta-Co as having a lower refractive index than the reference absorber. Our copy does not say that low-n and high-k masks were both proposed specifically to overcome 3D mask effects. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [111] Van de Kerkhof, M. et al. EUV pellicle scanner integration for N2 nodes and beyond. Proc. SPIE 12494, 124940D (2023). source
- Not checked — no full text of the sourcecites [112] Zhao, R. et al. Computational lithography solutions to support EUV high-NA patterning. Proc. SPIE 12495, 124950R (2023). source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Owing to multilayer coatings, reflective components with efficiency up to ~70% are routinely achieved 20-22 .”
What the sources say
- Not checked — no full text of the sourcecites [20] Folta, J. A. et al. Advances in multilayer reflective coatings for extreme ultraviolet lithography. Proc. SPIE 3676, 702–709 (1999). source
- Partly supportedcites [21] Lee, Y.-M. in Efficient Extreme Ultraviolet Mirror Design Ch. 2, 2-1–2-26 (IOP Publishing, 2021). sourceExperimental — accuracy not yet measured
Our copy supports the mechanism but not the magnitude: §1-12 (p. 1-12) states that EUV optical components 'must employ reflective optics that typically has losses of 35%-45% for each mirror' (i.e. ~55-65% reflectivity), and §1.4 (p. 1-14) models ML-blank reflectors (photomask plus M5-M10) 'with reflectivity assumed to be 65%', with the multilayer (Mo/Si, cf. p. 1-13 'layers of silicon and tungsten to constructively reflect the EUV radiation') identified as the enabling coating technology. No passage in our copy states efficiency up to ~70% being routinely achieved; the highest reflectivity figure given is 65%, so the ~70% magnitude attributed here is not supported by this source. (LLM, conf=0.70)
- Supportedcites [22] Louis, E. Physics and Technology Development of Multilayer EUV Reflective Optics. PhD dissertation, Univ. of Twente (2012). source
Section 2.3.8 says Mo/Si multilayers are routinely produced and reports a measured reflectivity of 69.5% at 13.5 nm, supporting the approximate 70% figure for multilayer-coated mirrors. The passage specifies that this high value was obtained on flat, superpolished substrates. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“This cascade of secondary electrons leads to chemical reactions when using EUV radiation.”
What the sources say
- Supportedcites [57] Kozawa, T. & Tagawa, S. Radiation chemistry in chemically amplified resists. Jpn. J. Appl. Phys. 49, 030001 (2010). source
Section 3 explains that absorbed EUV photons emit photoelectrons, which cause further ionization and electronic excitation. Section 5 connects the resulting secondary electrons to chemical reactions in the resist, including acid-generator decomposition through electron attachment. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“To prevent issues with the finite thickness of photoresists -such as LWR, pattern collapse and reduced resolution -resist films should ideally decrease in thickness to sub -10 nm, single or few monolayers 12 8 .”
What the sources say
- Could not verifycites [128] Yildirim, O. et al. Improvements in resist performance towards EUV HVM. Proc. SPIE 10143, 101430 (2017). sourceExperimental — accuracy not yet measured
Section 3.4 mentions resist-film thickness as a possible process-optimization variable, but does not say finite thickness causes LWR, pattern collapse, or reduced resolution. Searches for thickness, collapse, and sub-10-nm or monolayer films found no passage establishing that causal claim; page numbers were unavailable in our copy. (LLM, conf=0.74)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The ellipse shown in Fig. 3 corresponds to an exposure latitude of 10%.”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
21 more claims
Create a free account to see all 117 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 66
- It may state two separate claims as one. 52
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ C ompeting interests :
“Adapted from Adapted from Yildirim et al. 128 .”
§ REFERENCES
“131. Yildirim, O. et al. Improvements in resist performance towards EUV HVM. Proc. SPIE 10143 , 101430Q (2019).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Patterned structures and devices
“In these three -dimensional devices, the nchannel and pchannel transistors are stacked vertically on top of each other, which can increase performance and density at the expense of processing complexity 99 .”
§ Patterned structures and devices
“Although up to a 50% decrease in density is expected by avoiding several metal layers, the performance increase might be hindered by parasitic effects 100 .”
Citations
Cites
Templated Self‐Assembly of Block Copolymers: Top‐Down Helps Bottom‐Up
Cheng, J. Y., Ross, C. A., Smith, H. I., & Thomas, E. L. (2006) · Advanced Materials · doi:10.1002/adma.200502651 · Cited by 695
Wagner, C., & Harned, N. (2010) · Nature Photonics · doi:10.1038/nphoton.2009.251 · Cited by 650 · cited 1×
“There is no foreseeable move to an even smaller wavelength beyond EUV (BEUV) owing to several technical, economic and logistical hurdles, although it has been proposed 105 and cannot be excluded as a long-term, next-generation solution.”
Position Control in Lithographic Equipment [Applications of Control]
(2011) · IEEE Control Systems · doi:10.1109/mcs.2011.941882 · Cited by 423
Bae, G., Bae, D.-I., Kang, M., Hwang, S. M., Kim, S. S., Seo, B., Kwon, T. Y., Lee, T. J., Moon, C., Choi, Y. M., et al. (2018) · 2018 IEEE International Electron Devices Meeting (IEDM) · doi:10.1109/iedm.2018.8614629 · Cited by 368 · cited 2×
“This led to the introduction of gate-all-around field-effect transistor (GAAFET or nanosheet) technology in HVM, wherein the transistor channels are in stacked nanosheets with the gate wrapped around them 96,97 .”
Radiation Chemistry in Chemically Amplified Resists
Kozawa, T., & Tagawa, S. (2010) · Japanese Journal of Applied Physics · doi:10.1143/jjap.49.030001 · Cited by 360
Soft x-ray reduction lithography using multilayer mirrors
Kinoshita, H., Kurihara, K., Ishii, Y., & Torii, Y. (1989) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.584507 · Cited by 270 · cited 1×
“Molybdenum–silicon multilayer coatings with higher reflectivity at EUV wavelengths 14 were developed and used in a higher-resolution projection system 15 , a major milestone towards EUVL.”
The Complementary FET (CFET) for CMOS scaling beyond N3
Ryckaert, J., Schuddinck, P., Weckx, P., Bouche, G., Vincent, B., Smith, J., Sherazi, Y., Mallik, A., Mertens, H., Demuynck, S., et al. (2018) · 2018 IEEE Symposium on VLSI Technology · doi:10.1109/vlsit.2018.8510618 · Cited by 262 · cited 1×
“Although up to a 50% decrease in density is expected by avoiding several metal layers, the performance increase might be hindered by parasitic effects 99 .”
Trends in photoresist materials for extreme ultraviolet lithography: A review
Wang, X., Tao, P., Wang, Q., Zhao, R., Liu, T., Hu, Y., Hu, Z., Wang, Y., Wang, J., Tang, Y., et al. (2023) · Materials Today · doi:10.1016/j.mattod.2023.05.027 · Cited by 222
Molybdenum-silicon multilayer mirrors for the extreme ultraviolet
Barbee, T. W., Mrowka, S., & Hettrick, M. C. (1985) · Applied Optics · doi:10.1364/ao.24.000883 · Cited by 220 · cited 1×
“Molybdenum–silicon multilayer coatings with higher reflectivity at EUV wavelengths 14 were developed and used in a higher-resolution projection system 15 , a major milestone towards EUVL.”
Manouras, T., & Argitis, P. (2020) · Nanomaterials · doi:10.3390/nano10081593 · Cited by 196
Research works printed but not linked: 6
- Moore, G. E. Cramming more components onto integrated circuits. Electronics 38, 114–117 (1965). This is the original paper by Moore wherein he predicted the density of integrated circuits in the years to come and has been driving the semiconductor industry for five decades.
- Tennant, D.M. in Nanotechnology (ed. Timp, G.) 164 (Springer, 1999).
- Purvis, M. et al. Industrialization of a robust EUV source for high-volume manufacturing and power scaling beyond 250 W. Proc. SPIE 10583, 1058327 (2018).
- Xie, R. et al. A 7nm FinFET technology featuring EUV patterning and dual strained high mobility channels. in 2016 IEEE International Electron Devices Meeting (IEDM) 2.7.1–2.7.4 (IEEE, 2016).
- IEEE. International Roadmap for Devices and Systems, 2023 Update: Lithography & Patterning (IEEE, 2023). This ITRS report is a very important document that can be used to analyse the current situation in semiconductor industry and make predictions or set goals for the future.
- Gstrein, F. Material and patterning innovation: the foundation for Moore’s law extension. Proc. SPIE PC12497, PC1249704 (2023).
Cited by
Yin, Y., & Yang, Y. (2025) · Sustainability · doi:10.3390/su17073160 · Cited by 62
Review of Industrialization Development of Nanoimprint Lithography Technology
Cao, Y., Ma, D., Li, H., Cui, G., Zhang, J., & Yang, Z. (2025) · Chips · doi:10.3390/chips4010010 · Cited by 47
Two-photon polymerization-assisted 3D laser nanoprinting: from fundamentals to modern applications
Boudene, I., & Bougdid, Y. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc02037a · Cited by 44
Super-resolution laser machining
Huang, J., Xu, K., & Xu, S. (2025) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2025.104246 · Cited by 36
Polytelluoxane as the ideal formulation for EUV photoresist
Zhou, R., Cao, M., Tan, Y., Neisser, M. O., & Xu, H. (2025) · Science Advances · doi:10.1126/sciadv.adx1918 · Cited by 27
Metadata
- Authors
- Kazazis, D., Santaclara, J. G., van Schoot, J., Mochi, I., & Ekinci, Y.
- Affiliations
- Paul Scherrer Institute (CH)
- ASML (Netherlands) (NL)
- Venue
- Nature Reviews Methods Primers
- Published
- 2024-11-28
- Volume
- 4
- Issue
- 1
- ISSN
- 2662-8449 (ISSN-L)
- OpenAlex
- W4404826761
- Cited by
- 149
- References
- 102
- Citations by year
- 2026: 88 · 2025: 61
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- green
- www.dora.lib4ri.ch
- Licence
- other-oa
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Reviews Methods Primers (publishedVersion)
- DORA PSI (Paul Scherrer Institute) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Photolithography Techniques
- Physical Sciences › Physics and Astronomy › Radiation › Advanced X-ray Imaging Techniques
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced optical system design
- Keywords
- EUV lithography, semiconductor manufacturing, photoresist, EUV photoresists
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extreme ultraviolet lithography. https://app.cochat.ai/papers/10.1038/s43586-024-00361-z
- The paper
- Kazazis, D., Santaclara, J. G., van Schoot, J., Mochi, I., & Ekinci, Y. (2024). Extreme ultraviolet lithography. Nature Reviews Methods Primers. https://doi.org/10.1038/s43586-024-00361-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.