Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective
Open accessThe DOI matches its Crossref record; 172 of the 176 references it cites were found in a registry or an index.
Abstract
Three dimensional (3D) printing as an advanced manufacturing technology is progressing to be established in the pharmaceutical industry to overcome the traditional manufacturing regime of 'one size fits for all'. Using 3D printing, it is possible to design and develop complex dosage forms that can be suitable for tuning drug release. Polymers are the key materials that are necessary for 3D printing. Among all 3D printing processes, extrusion-based (both fused deposition modeling (FDM) and pressure-assisted microsyringe (PAM)) 3D printing is well researched for pharmaceutical manufacturing. It is important to understand which polymers are suitable for extrusion-based 3D printing of pharmaceuticals and how their properties, as well as the behavior of polymer–active pharmaceutical ingredient (API) combinations, impact the printing process. Especially, understanding the rheology of the polymer and API–polymer mixtures is necessary for successful 3D printing of dosage forms or printed structures. This review has summarized a holistic materials–process perspective for polymers on extrusion-based 3D printing. The main focus herein will be both FDM and PAM 3D printing processes. It elaborates the discussion on the comparison of 3D printing with the traditional direct compression process, the necessity of rheology, and the characterization techniques required for the printed structure, drug, and excipients. The current technological challenges, regulatory aspects, and the direction toward which the technology is moving, especially for personalized pharmaceuticals and multi-drug printing, are also briefly discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






![Figure 7 Viscosity ratio (η/ηo) of acetaminophen (APAP) in poly (ethylene oxide) (PEO) at different temperatures to determine the solubility of the drug. Reprinted with permission from M Yang, International Journal of Pharmaceutics, Published by Elsevier, 2011 [123].](https://figures.cochat.ai/paper-figures/5b0f2d6634994ae79cc2c2cbcb3eb075/polymers-for-extrusion-based-3d-printing-of-pharmaceuticals-a-holistic-figure-7.jpg)
![Figure 8 The rheological characterization of the blends of different polymers [Affinisol 15LV (Aff15), Kollidon SR (KollSR), Eudragit EPO (EPO), hydroxypropyl cellulose (HPC)]. Constituent effect visualized with frequency sweep at the maximum processing temperature (200 °C). Reprinted with permission from K Ilyés, European Journal of Pharmaceutical Sciences, Published by Elsevier, 2019 [136].](https://figures.cochat.ai/paper-figures/b1ca4ae8602d4e64bbc6cbb3bfa0f28d/polymers-for-extrusion-based-3d-printing-of-pharmaceuticals-a-holistic-figure-8.jpg)

![Figure 10 (a) Design of tablets, (b) the relationship between the target and achieved prednisolone dose, and (c) PVA based FDM 3D printed tablets having different dose strengths [56].](https://figures.cochat.ai/paper-figures/76d1606acd2449ce8e030af1e4501a72/polymers-for-extrusion-based-3d-printing-of-pharmaceuticals-a-holistic-figure-10.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“3D printing enables the fabrication of complex three-dimensional structures via computer-aided design, allows precise control over scaffold porosity, pore size, and microstructure, and facilitates accurate modulation of mechanical strength, and creates microstructures with graded porosity within a single scaffold [88–90].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [88]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
Siepmann, J. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00112-0 · Cited by 2,613
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Correlation of dynamic and steady flow viscosities
Cox, W. P., & Merz, E. H. (1958) · Journal of Polymer Science · doi:10.1002/pol.1958.1202811812 · Cited by 2,092
Personalized medicine: Time for one-person trials
Schork, N. J. (2015) · Nature · doi:10.1038/520609a · Cited by 1,223
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
Siepmann, J., & Peppas, N. A. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.028 · Cited by 1,021
Awaja, F., Gilbert, M., Kelly, G., Fox, B., & Pigram, P. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.007 · Cited by 928
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Research works printed but not linked: 3
- 107. Hardung H., Djuric D., Ali S. Combining HME & solubilization: Soluplus®—The solid solution. Drug Deliv. Technol. 2010;10:20–27.
- 134. Aho J., Genina N., Edinger M., Botker J.P., Baldursdottir S., Rantanen J. Drug-loaded poly (ε-caprolactone) for 3D printing of personalized medicine: A rheological study; Proceedings of the 25th Nordic Rheology Conference; Helsinki, Finland. 30 May–1 June 2016; pp. 97–100.
- 164. Campbell R. Pharma to table: 3-D printing and the regulatory future of home remedies. Conn. L. Rev. CONNtemplations. 2017;49:1.
Cited by
3D Printing as a Promising Tool in Personalized Medicine
Vaz, V. M., & Kumar, L. (2021) · AAPS PharmSciTech · doi:10.1208/s12249-020-01905-8 · Cited by 409
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
Lignins as Promising Renewable Biopolymers and Bioactive Compounds for High-Performance Materials
Vasile, C., & Baican, M. (2023) · Polymers · doi:10.3390/polym15153177 · Cited by 251
“AM techniques, such as extrusion printing, direct ink writing, and fused deposition modeling, are suitable for printing pure lignin, lignin derivatives, or a combination with other polymers or monomers as fillers or additives necessary to create lignin-based printable feedstocks [278,279].”
MethodPolymeric drug delivery systems by additive manufacturing
Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.03.022 · Cited by 254
“Like FDM, pressure assisted microsyringe (PAM, also known as semi-solid extrusion, SSE) relies on the computer-controlled preparation of a 3D structure with designed composition and architecture via the deposition of the materials in a layer-bylayer manner [96].”
BackgroundMethodInfluentialRecent advances in 3D printing technologies for wearable (bio)sensors
Kalkal, A., Kumar, S., Kumar, P., Pradhan, R., Willander, M., Packirisamy, G., Kumar, S., & Malhotra, B. D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102088 · Cited by 232
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Awad, A., Fina, F., Trenfield, S. J., Patel, P., Goyanes, A., Gaisford, S., & Basit, A. W. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11040148 · Cited by 229
Fused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities
Awasthi, P., & Banerjee, S. S. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102177 · Cited by 222
Dumpa, N., Butreddy, A., Wang, H., Komanduri, N., Bandari, S., & Repka, M. A. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120501 · Cited by 197
3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals
Serrano, D. R., Kara, A., Yuste, I., Luciano, F. C., Ongoren, B., Anaya, B. J., Molina, G., Diez, L., Ramirez, B. I., Ramirez, I. O., et al. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020313 · Cited by 192
“Key: SSE, semisolid extrusion also known as PAM; FDM, fuse deposition modelling; DPE, direct powder extrusion; SLA, stereolithography; SLS, selective laser sintering; HTA, hypertension; HCHO, hypercholesterolemia; TB, thrombosis; HPMCAS, hydroxypropyl methylcellulose acetate succinate; MgSt, magnesium stearate; PEG, p…”
BackgroundInfluential3D printing: An appealing route for customized drug delivery systems
Elkasabgy, N. A., Mahmoud, A. A., & Maged, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119732 · Cited by 177
The role of three-dimensional printing in healthcare and medicine
Kholgh Eshkalak, S., Rezvani Ghomi, E., Dai, Y., Choudhury, D., & Ramakrishna, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108940 · Cited by 162
A perspective on the wet spinning process and its advancements in biomedical sciences
Shirvan, A. R., Nouri, A., & Sutti, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111681 · Cited by 169
3D Printing of Pharmaceuticals and Drug Delivery Devices
Mathew, E., Pitzanti, G., Larrañeta, E., & Lamprou, D. A. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12030266 · Cited by 157
“Finally, examined the challenges and opportunities related to pharmaceutical extrusion-based 3Dp [20].”
Background3D Printing in medicine: Technology overview and drug delivery applications
Mohammed, A. A., Algahtani, M. S., Ahmad, M. Z., Ahmad, J., & Kotta, S. (2021) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2021.100037 · Cited by 180
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Pereira, G. G., Figueiredo, S., Fernandes, A. I., & Pinto, J. F. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090795 · Cited by 159
“As mentioned before, the viscosity of a mixture of materials must be low enough to enable flow and allow the extrusion of the filament or the printing of the dosage form [131] but not too low to prevent flow as a liquid.”
BackgroundChong, W. J., Shen, S., Li, Y., Trinchi, A., Simunec, D. P., Kyratzis, I. L., Sola, A., & Wen, C. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.09.039 · Cited by 145
Cheng, Y., Qin, H., Acevedo, N. C., Jiang, X., & Shi, X. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119983 · Cited by 149
Drug Delivery Systems in Regenerative Medicine: An Updated Review
Mansour, A., Romani, M., Acharya, A. B., Rahman, B., Verron, É., & Badran, Z. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020695 · Cited by 145
“However, the PAM technique involves applying compressed air to extrude viscous and semi-liquid materials through a microsyringe which is deposited layer-by-layer into microstructures of 5–10 μm or less [33,47].”
Method3D printing tablets: Predicting printability and drug dissolution from rheological data
Elbadawi, M., Gustaffson, T., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119868 · Cited by 132
3D printing in biomedicine: advancing personalized care through additive manufacturing
Pathak, K., Saikia, R., Das, A., Das, D., Islam, M. A., Pramanik, P., Parasar, A., Borthakur, P. P., Sarmah, P., Saikia, M., et al. (2023) · Exploration of Medicine · doi:10.37349/emed.2023.00200 · Cited by 139
Jacob, S., Nair, A. B., Patel, V., & Shah, J. (2020) · AAPS PharmSciTech · doi:10.1208/s12249-020-01771-4 · Cited by 129
3D printing technology as innovative solutions for biomedical applications
Al-Dulimi, Z., Wallis, M., Tan, D. K., Maniruzzaman, M., & Nokhodchi, A. (2020) · Drug Discovery Today · doi:10.1016/j.drudis.2020.11.013 · Cited by 127
Buccal films: A review of therapeutic opportunities, formulations & relevant evaluation approaches
Shipp, L., Liu, F., Kerai-Varsani, L., & Okwuosa, T. C. (2022) · Journal of Controlled Release · doi:10.1016/j.jconrel.2022.10.058 · Cited by 162
“Rheological properties that require characterisation include the material viscosity, deformation behaviour, thixotropy, yield stress, as well as storage and loss moduli [196].”
Aita, I. E., Breitkreutz, J., & Quodbach, J. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.11.008 · Cited by 114
Auriemma, G., Tommasino, C., Falcone, G., Esposito, T., Sardo, C., & Aquino, R. P. (2022) · Molecules · doi:10.3390/molecules27092784 · Cited by 123
“The filament for the 3D printing process must have key quality attributes, such as constant dimension, elasticity, and mechanical resistance [128].”
BackgroundQuality considerations on the pharmaceutical applications of fused deposition modeling 3D printing
Melocchi, A., Vangosa, F. B., Uboldi, M., Parietti, F., Turchi, M., von Zeppelin, D., Maroni, A., Zema, L., Gazzaniga, A., & Zidan, A. S. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119901 · Cited by 100
Quodbach, J., Bogdahn, M., Breitkreutz, J., Chamberlain, R., Eggenreich, K., Elia, A.-G., Gottschalk, N., Gunkel‐Grabole, G., Hoffmann, L., Kapote, D. N., et al. (2021) · Therapeutic Innovation & Regulatory Science · doi:10.1007/s43441-021-00354-0 · Cited by 98
A digital twin ecosystem for additive manufacturing using a real-time development platform
Pantelidakis, M., Mykoniatis, K., Liu, J., & Harris, G. A. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09164-6 · Cited by 120
“DTs have been heralded as a major milestone towards the transition to Industry 4.0, where advanced digitalization drives informed decision-making.”
BackgroundInfluentialPolysaccharide 3D Printing for Drug Delivery Applications
Zamboulis, A., Michailidou, G., Koumentakou, I., & Bikiaris, D. Ν. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14010145 · Cited by 103
“After printing, the materials must undergo rapid gelation in order to avoid altering the printed construct [65,66].”
MethodBanerjee, R., & Ray, S. S. (2023) · ACS Omega · doi:10.1021/acsomega.3c03310 · Cited by 111
Hassan, A., Alomayri, T. S., Noaman, M. F., & Zhang, C. (2025) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-024-10220-5 · Cited by 106
3D Bioprinted Scaffolds for Tissue Repair and Regeneration
Liu, N., Zhang, X., Guo, Q., Wu, T. S., & Wang, Y. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.925321 · Cited by 107
“At present, the most common 3D printing technologies are mainly divided into three categories: extrusion printing, inkjet printing and laserassisted bioprinting (LAB) (Figure 1) (Azad et al., 2020).”
BackgroundSola, A. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200197 · Cited by 110
Obeid, S., Madžarević, M., Krkobabić, M., & Ibric, S. R. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120507 · Cited by 92
Elhattab, K., Bhaduri, S. B., & Sikder, P. (2022) · Polymers · doi:10.3390/polym14061222 · Cited by 100
“The importance of the Cox–Merz rule is due to its ability to increase the shear rate range that can be tested from the oscillatory rheometer since viscosity as a function of shear rate is hard to measure at a high shear rate due to significant sample deformation and secondary flows [48,49].”
BackgroundMelocchi, A., Uboldi, M., Cerea, M., Foppoli, A., Maroni, A., Moutaharrik, S., Palugan, L., Zema, L., & Gazzaniga, A. (2020) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2020.07.011 · Cited by 98
Sustainable Robots 4D Printing
Soleimanzadeh, H., Rolfe, B., Bodaghi, M., Jamalabadi, M., Zhang, X., & Zolfagharian, A. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202300289 · Cited by 95
A review on 3D printing in tissue engineering applications
Mani, M. P., Sadia, M., Jaganathan, S. K., Khudzari, A. Z., Supriyanto, E., Saidin, S., Ramakrishna, S., Ismail, A. F., & Faudzi, A. A. M. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2021-0059 · Cited by 85
3D Printing as a Technological Strategy for the Personalized Treatment of Wound Healing
Uchida, D. T., & Bruschi, M. L. (2023) · AAPS PharmSciTech · doi:10.1208/s12249-023-02503-0 · Cited by 87
“In addition to what was mentioned above, for the manufacture of the desired dosage form, other parameters must be evaluated for the selection of the appropriate 3DP such as the APIs, the biomaterial composition, the desired geometry, the appropriate rheological properties, and the drug release pattern [62, 93].”
BackgroundMethodFanous, M., Bitar, M., Gold, S., Sobczuk, A. A., Hirsch, S., Ogorka, J., & Imanidis, G. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120417 · Cited by 80
Production of Drug Delivery Systems Using Fused Filament Fabrication: A Systematic Review
Shaqour, B., Samaro, A., Verleije, B., Beyers, K., Vervaet, C., & Cos, P. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12060517 · Cited by 88
“[14] discussed various polymers used in such processes and the material properties that should be considered when developing a drug-loaded device.”
BackgroundControlling drug release with additive manufacturing-based solutions
Patel, S. K., Khoder, M., Peak, M., & Alhnan, M. A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.04.020 · Cited by 81
Govender, R., Kissi, E. O., Larsson, A., & Tho, I. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113923 · Cited by 84
3D-Printed Products for Topical Skin Applications: From Personalized Dressings to Drug Delivery
de Oliveira, R. S., Fantaus, S. S., Guillot, A. J., Melero, A., & Beck, R. C. R. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13111946 · Cited by 86
“Understanding the rheology f the polymer and how drugs can affect printability is important for efficient 3D printi g [57].”
BackgroundMethodInfluentialVersatility on demand – The case for semi-solid micro-extrusion in pharmaceutics
Rahman, J., & Quodbach, J. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.02.013 · Cited by 64
Cellulose and its derivatives for application in 3D printing of pharmaceuticals
Giri, B. R., Poudel, S., & Kim, D. W. (2020) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-020-00498-5 · Cited by 70
Panraksa, P., Udomsom, S., Rachtanapun, P., Chittasupho, C., Ruksiriwanich, W., & Jantrawut, P. (2020) · Polymers · doi:10.3390/polym12112666 · Cited by 63
“A variety of hydrophilic polymers such as polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) are used as film-forming polymers for the preparation of ODFs, and most of them can also be used as printing materials for ext…”
BackgroundFalcone, G., Mazzei, P., Piccolo, A., Esposito, T., Mencherini, T., Aquino, R. P., Gaudio, P. D., & Russo, P. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118746 · Cited by 62
Emerging Research in Conductive Materials for Fused Filament Fabrication: A Critical Review
Simunec, D. P., & Sola, A. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202101476 · Cited by 67
A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine
Awad, A., Goyanes, Á., Basit, A. W., Zidan, A. S., Xu, C., Li, W., Narayan, R. J., & Chen, R. K. (2022) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4056199 · Cited by 63
Đuranović, M., Obeid, S., Madžarević, M., Cvijić, S., & Ibric, S. R. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.120053 · Cited by 57
Viidik, L., Jemina, V., Laitinen, R., Korhonen, O., Ketolainen, J., Aruväli, J., Kirsimäe, K., Kogermann, K., Heinämäki, J., Laidmäe, I., et al. (2020) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2020.105619 · Cited by 55
The Future of Medicine: How 3D Printing Is Transforming Pharmaceuticals
Bernatonienė, J., Stabrauskienė, J., Kazlauskaitė, J. A., Bernatonyte, U., & Kopustinskienė, D. M. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17030390 · Cited by 65
“As mentioned before, this method supports a diverse array of materials, each offering unique properties that can be customized to meet specific requirements [46].”
InfluentialHenry, S., Samaro, A., Marchesini, F. H., Shaqour, B., Macedo, J., Vanhoorne, V., & Vervaet, C. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120361 · Cited by 55
Bom, S., Martins, A. M., Ribeiro, H. M., & Marto, J. M. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120794 · Cited by 56
Ahmadzadeh, S., & Ubeyitogullari, A. (2022) · Additive manufacturing · doi:10.1016/j.addma.2023.103549 · Cited by 59
Application of Extrusion-Based 3D Printed Dosage Forms in the Treatment of Chronic Diseases
Annaji, M., Ramesh, S., Poudel, I., Govindarajulu, M., Arnold, R. D., Dhanasekaran, M., & Babu, R. J. (2020) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2020.09.042 · Cited by 58
Additive Manufacturing of Oral Tablets: Technologies, Materials and Printed Tablets
Abaci, A., Gedeon, C., Kuna, A., & Güvendiren, M. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13020156 · Cited by 68
“For example, Eudragit S and L can withstand the acidic environment of the stomach, enabling drug to be released in the intestine, whereas Eudragit E dissolves in acidic conditions up to pH = 5 (enabling release in the stomach) [39].”
BackgroundMethodInfluentialSharma, V., Roozbahani, H., Alizadeh, M., & Handroos, H. (2021) · IEEE Access · doi:10.1109/access.2021.3071459 · Cited by 58
“Generally, it can be concluded that the tensile strength and toughness are increased when utilizing ether/esters in 3D printing [77], [78].”
BackgroundTabriz, A. G., Scoutaris, N., Gong, Y., Hui, H.-W., Kumar, S., & Douroumis, D. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120755 · Cited by 53
Prospect of 3D printing technologies in maintenance of asphalt pavement cracks and potholes
Gong, F., Cheng, X., Fang, B., Cheng, C., Liu, Y., & You, Z. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136551 · Cited by 51
Bom, S., Santos, C., Barros, R., Martins, A. M., Paradiso, P., Cláudio, R., Pinto, P. C., Ribeiro, H. M., & Marto, J. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12080719 · Cited by 50
“[5], it is fundamental to understand which polymers are suitable for extrusion-based 3D printing, to determine the interactions between the polymer and the therapeutic substances, and to understand how their properties impact the printing process.”
BackgroundMethodKrkobabić, M., Medarević, D. P., Pešić, N., Vasiljević, D., Ivković, B. M., & Ibric, S. R. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090833 · Cited by 60
“Current pharmaceutical manufacturing is not suitable for personalized medicines, while application of the three-dimensional (3D) printing (an additive manufacturing technology) in pharmacies might enable the production of small customized batches of solid dosage forms for oral administration with different dose and re…”
BackgroundNovel 3D Bioglass Scaffolds for Bone Tissue Regeneration
Daskalakis, E., Huang, B., Vyas, C., Acar, A. A., Fallah, A., Cooper, G., Weightman, A., Koç, B., Blunn, G. W., & Bártolo, P. (2022) · Polymers · doi:10.3390/polym14030445 · Cited by 53
Structure–Mechanical Property Relationships of 3D-Printed Porous Polydimethylsiloxane
Woo, R., Chen, G., Zhao, J., & Bae, J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00417 · Cited by 54
Nashed, N., Lam, M. K., & Nokhodchi, A. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120237 · Cited by 49
3D printed oral solid dosage form: Modified release and improved solubility
Wang, N., Shi, H., & Yang, S. (2022) · Journal of Controlled Release · doi:10.1016/j.jconrel.2022.09.023 · Cited by 53
Gordeev, E. G., & Ananikov, V. P. (2020) · Russian Chemical Reviews · doi:10.1070/rcr4980 · Cited by 51
Molimi, M. B., Egan, P., & Adebo, O. A. (2024) · Food Research International · doi:10.1016/j.foodres.2024.115629 · Cited by 51
Keikhosravi, N., Mirdamadian, S. Z., Varshosaz, J., & Taheri, A. (2020) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2020.1820034 · Cited by 48
Engineered biomimetic hydrogels for organoids
Li, Y., Saiding, Q., Wang, Z., & Cui, W. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101216 · Cited by 48
Biomass 3D Printing: Principles, Materials, Post-Processing and Applications
Li, Y., Ren, X., Zhu, L., & Li, C. (2023) · Polymers · doi:10.3390/polym15122692 · Cited by 54
“Previous review reports on biomass 3D printing have focused on the development of various types of 3D printing technology [9] and clarified the research progress of certain technologies [10–12].”
BackgroundThan, Y. M., Suriyarak, S., & Titapiwatanakun, V. (2022) · Polymers · doi:10.3390/polym14061108 · Cited by 47
“From these findings, the viscosity range at the highest angular frequency could be a better representative to simulate the shear action during extrusion [73] than the range at 0.”
BackgroundInfluentialPanraksa, P., Qi, S., Udomsom, S., Tipduangta, P., Rachtanapun, P., Jantanasakulwong, K., & Jantrawut, P. (2021) · Polymers · doi:10.3390/polym13203454 · Cited by 44
“For syringe extrusion 3D printing, there is a range of important factors that need to be considered for the selection of polymers, such as rheological characteristics, extrudability through the nozzle, reproducible and consistent flow of the printing formulations, and drying conditions [25].”
Background3D Printing: An Emerging Technology for Biocatalyst Immobilization
Pose‐Boirazian, T., Martínez-Costas, J., & Eibes, G. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200110 · Cited by 48
A 3D Printer in the Lab: Not Only a Toy
Saggiomo, V. (2022) · Advanced Science · doi:10.1002/advs.202202610 · Cited by 45
Novel polyester-based thermoplastic elastomers for 3D-printed long-acting drug delivery applications
Koutsamanis, I., Paudel, A., Alva, C., Wiltschko, L., & Spoerk, M. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.05.030 · Cited by 45
Bendicho‐Lavilla, C., Rodríguez‐Pombo, L., Januskaite, P., Rial, C., Alvarez‐Lorenzo, C., Basit, A. W., & Goyanes, Á. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.105337 · Cited by 42
“Among the various 3DP technologies investigated, material extrusion technologies are the most used in pharmaceutics [16].”
Background3D printing: Bioinspired materials for drug delivery
Kimbell, G., & Azad, M. A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821352-0.00011-3 · Cited by 66
Self-citationAdvances in Biodegradable Soft Robots
Kim, J., Park, H., & Yoon, C. (2022) · Polymers · doi:10.3390/polym14214574 · Cited by 46
Feng, J., Yao, L., Lyu, Z., Wu, Z., Zhang, G., & Zhao, H. (2022) · Polymer Composites · doi:10.1002/pc.27221 · Cited by 38
Lu, A., Zhang, J., Jiang, J., Zhang, Y., Giri, B. R., Kulkarni, V. R., Aghda, N. H., Wang, J., & Maniruzzaman, M. (2022) · Pharmaceutical Research · doi:10.1007/s11095-022-03378-9 · Cited by 37
Vyas, J., Singh, S. K., Shah, I. T., & Prajapati, B. G. (2023) · AAPS PharmSciTech · doi:10.1208/s12249-023-02720-7 · Cited by 43
“By dissolving the additional foil in a suitable solvent, the unwanted portion is discarded while retaining the irradiance [98].”
Zhang, B., Teoh, X.-Y., Yan, J., Gleadall, A., Belton, P., Bibb, R., & Qi, S. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.122140 · Cited by 38
Al-Litani, K., Tariq, A., Martinez, P. R., & Buanz, A. B. M. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.114859 · Cited by 39
“[ 13, 48, 61] It highlights the main formulation challenge which is drug loading, which is done in most cases post-printing, and the need to demonstrate more prolonged drug release as current hormonal IUS for example last between 3 to 5 years.”
Racaniello, G. F., Pistone, M., Meazzini, C., Lopedota, A., Arduino, I., Rizzi, R., Lopalco, A., Musazzi, U. M., Cilurzo, F., & Denora, N. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123214 · Cited by 40
“…(PVA)(Wei et al., 2020), polyethylene oxide (PEO) (Chung et al., 2022), polylactic acid (PLA)(Liu et al., 2020), and polyvinylpyrrolidone (PVP) (Dores et al., 2020) have been investigated for the manufacture of 3D printing-based pharmaceutical forms for personalized therapy (Azad et al., 2020).”
Smart pills and drug delivery devices enabling next generation oral dosage forms
Milián-Guimerá, C., McCabe, R., Thamdrup, L. H. E., Ghavami, M., & Boisen, A. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.10.041 · Cited by 40
Đuranović, M., Madžarević, M., Ivković, B. M., Ibric, S. R., & Cvijić, S. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.121194 · Cited by 37
Lima, A. L., Pires, F. Q., Hilgert, L. A., Barreto, L. C. L. D. S., Gratieri, T., Gelfuso, G. M., & Cunha‐Filho, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.03.001 · Cited by 36
Hoffmann, L., Breitkreutz, J., & Quodbach, J. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14112411 · Cited by 36
Abdella, S., Kim, S., Afinjuomo, F., Song, Y., Upton, R. N., & Garg, S. (2023) · Drug Delivery and Translational Research · doi:10.1007/s13346-023-01446-0 · Cited by 37
Funk, N. L., Fantaus, S. S., & Beck, R. C. R. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.122066 · Cited by 38
Crișan, A. G., Porfire, A. S., Ambrus, R., Katona, G., Rus, L., Porav, A. S., Ilyés, K., & Tomuță, I. (2021) · Pharmaceuticals · doi:10.3390/ph14050418 · Cited by 34
“Therefore, the molecular friction within the large, entangled PVA chains was lowered during thermal treatment [4], and the viscosity of the melted mass was reduced by the liquid state”
BackgroundModular design principle based on compartmental drug delivery systems
Eleftheriadis, G. K., Genina, N., Boetker, J. P., & Rantanen, J. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113921 · Cited by 36
3D Printing: an appealing technology for the manufacturing of solid oral dosage forms
Pitzanti, G., Mathew, E., Andrews, G. P., Jones, D. S., & Lamprou, D. A. (2021) · Journal of Pharmacy and Pharmacology · doi:10.1093/jpp/rgab136 · Cited by 37
Coupling of Fused Deposition Modeling and Inkjet Printing to Produce Drug Loaded 3D Printed Tablets
Junqueira, L. A., Tabriz, A. G., Raposo, F. J., Carobini, L. R., Vaz, U. P., Brandão, M. A. F., Douroumis, D., & Raposo, N. R. B. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14010159 · Cited by 34
“PVA has been widely used in the 3DP of medicines [25–27], due to its biocompatibility, biodegradability, and more importantly, being approved by FDA [28,29].”
MethodMwizerwa, J. P., Liu, C., Xu, K., Zhao, N., Li, Y., Chen, Z., & Shen, J. J. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.05.030 · Cited by 33
Designing Lignin-Based Biomaterials as Carriers of Bioactive Molecules
Abdullah, T., İlyasoğlu, G., & Memić, A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15041114 · Cited by 34
Putting 3D printing to good use—Additive Manufacturing and the Sustainable Development Goals
Muth, J., Klunker, A., & Völlmecke, C. (2023) · Frontiers in Sustainability · doi:10.3389/frsus.2023.1196228 · Cited by 32
Metadata
- Authors
- Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T.
- Affiliations
- North Carolina Agricultural and Technical State University (US)
- Virginia Commonwealth University (US)
- City University of New York (US)
- Massachusetts College of Pharmacy and Health Sciences (US)
- Corresponding author
- Azad, Mohammad A.
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2020-02-03
- Volume
- 12
- Issue
- 2
- Pages
- 124
- ISSN
- 1999-4923 (ISSN-L)
- PMC
- PMC7076526
- OpenAlex
- W3003558240
- Semantic Scholar
- d0e7b174bfd4c9215a0e766bbf1923bb5c15a67d
- Cited by
- 356
- References
- 176
- Citations by year
- 2026: 38 · 2025: 44 · 2024: 48 · 2023: 73 · 2022: 66 · 2021: 57 · 2020: 28
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Pharmaceutics (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- CUNY Academic Works (City University of New York) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Keywords
- material extrusion, pharmaceutical 3D printing, fused deposition modeling, polymer rheology, controlled drug release
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.