Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach
Open accessThe DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Abstract
Electrospinning is the simplest and most widely used technology for producing ultra-thin fibers. During electrospinning, the high voltage causes a thin jet to be launched from the liquid polymer and then deposited onto the grounded collector. Depending on the type of the fluid, solution and melt electrospinning are distinguished. The morphology and physicochemical properties of the produced fibers depend on many factors, which can be categorized into three groups: process parameters, material properties, and ambient parameters. In the biomedical field, electrospun nanofibers have a wide variety of applications ranging from medication delivery systems to tissue engineering scaffolds and soft electronics. Many of these showed promising results for potential use as medical devices in the future. Medical devices are used to cure, prevent, or diagnose diseases without the presence of any active pharmaceutical ingredients. The regulation of conventional medical devices is strict and carefully controlled; however, it is not yet properly defined in the case of nanotechnology-made devices. This review is divided into two parts. The first part provides an overview on electrospinning through several examples, while the second part focuses on developments in the field of electrospun medical devices. Additionally, the relevant regulatory framework is summarized at the end of this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The high specific surface area of electrospinning is conducive to cell attachment and growth, and the porous structure is conducive to the infiltration and exchange of nutrients [75–77].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [77]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Zhu, C., Cao, R., Zhang, Y., & Chen, R. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.660571 · Cited by 22
RetractedElectrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028 · cited 1×
“The majority of papers showed a significant indirect influence of temperature on fiber diameter and morphology, concluding that the inverse connection between temperature and viscosity may be exploited to modify nanofibers [34,35].”
BackgroundElectrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305 · cited 1×
“The cone is named after Sir Geoffrey Taylor, who first modeled the phenomenon in 1964 [8].”
BackgroundElectrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289 · cited 1×
“In this way, the flight distance of the jet (tip-to-collector distance in the case of nozzle electrospinning) affects the fiber morphology [3,18].”
BackgroundElectrospinning jets and polymer nanofibers
Reneker, D. H., & Yarin, A. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.002 · Cited by 2,306
Skin Wound Healing Process and New Emerging Technologies for Skin Wound Care and Regeneration
Tottoli, E. M., Dorati, R., Genta, I., Chiesa, E., Pisani, S., & Conti, B. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12080735 · Cited by 1,340 · cited 1×
“As in wound dressings and tissue engineering, the ability of nanofibers to produce aligned scaffolds capable of mimicking the extracellular matrix is exploited [74,75].”
BackgroundDirect Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning
Li, D., & Xia, Y. (2004) · Nano Letters · doi:10.1021/nl049590f · Cited by 1,300
Electrospinning of polymeric nanofibers for drug delivery applications
Hu, X., Liu, S., Zhou, G., Huang, Y., Xie, Z., & Jing, X. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.018 · Cited by 1,190 · cited 1×
“Additional benefits are the tailorable release profile, the high loading capacity, the high encapsulation efficiency, the ease of operation, and the cost-effectiveness [73].”
BackgroundIndustrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, C., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 965
Research works printed but not linked: 1
- 61. Lanaro, M.; Booth, L.; Powell, S.K.; Woodruff, M.A. Electrofluidodynamic Technologies for Biomaterials and Medical Devices: Melt Electrospinning. In Electrofluidodynamic Technologies (EFDTs) for Biomaterials and Medical Devices: Principles and Advances; Woodhead Publishing Series in Biomaterials; Woodhead Publishing: Duxford, UK, 2011; pp. 37-70. ISBN 978-1-84569-741-9.
Cited by
Nanofibers: A current era in drug delivery system
Hiwrale, A., Bharati, S., Pingale, P., & Rajput, A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18917 · Cited by 203
“The liquid’s viscosity get enhanced due to higher molecular weight and concentration [48,49].”
BackgroundKurowiak, J., Klekiel, T., & Będziński, R. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316952 · Cited by 168
Machine learning applications for electrospun nanofibers: a review
Subeshan, B., Atayo, A., & Asmatulu, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09994-7 · Cited by 140
“The high surface area inherent in this narrow fluid jet facilitates a quick loss of solvent, thereby accelerating the transformation of the fluid jet into a solidified fiber [7].”
Lian, S., Lamprou, D. A., & Zhao, M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123641 · Cited by 109
Recent Progress of Electrospun Nanofiber Dressing in the Promotion of Wound Healing
Lu, X., Zhou, L., & Song, W. (2024) · Polymers · doi:10.3390/polym16182596 · Cited by 102
“As the voltage increases, the hemispherical droplets at the needle mouth experience a growing electric field force, leading to the formation of a “Taylor cone” [34].”
BackgroundElectrospinning Technology, Machine Learning, and Control Approaches: A Review
Shabani, A., Al, G. A., Berri, N., Dominguez, B. C., Leese, H. S., & Martínez-Hernández, U. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202401353 · Cited by 76
Yessuf, A. M., Bahri, M., Kassa, T. S., Sharma, B. P., Salama, A. M., Xing, C., Zhang, Q., & Liu, Y. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00307 · Cited by 57
Younes, H. M., Kadavil, H., Ismail, H. M., Adib, S. S. A., Zamani, S., Alany, R. G., & Al-Kinani, A. A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics16010032 · Cited by 59
Electrospun nanofibers and their application as sensors for healthcare
Zhao, Y.-S., Huang, J., Yang, X., Wang, W., Yu, D., He, H., Liu, P., & Du, K. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1533367 · Cited by 62
“The fi ber morphology depends on process parameters, material properties, and environmental conditions (Uhljar and Ambrus, 2023; Thompson, 2006).”
Electrospun fibers for the treatment of skin diseases
Gürtler, A.-L., Rades, T., & Heinz, A. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.10.009 · Cited by 43
“An electrical potential is built up by an either grounded or negatively charged collector [18].”
BackgroundSyed, M. H., Khan, M. M. R., Zahari, M. A. K. M., Beg, M. D. H., & Abdullah, N. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112352 · Cited by 46
Wound dressings using electrospun nanofibers: mechanisms, applications, and future directions
Zhou, R., Ma, Y., Yang, M. H., Cheng, Y., Ma, X., Li, B., Zhang, Y., Cui, X., Liu, M., Long, Y., et al. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.113900 · Cited by 48
Mohite, P. B., Puri, A. V., Munde, S. V., Dave, R., Khan, S., Patil, R., Singh, A. K., Tipduangta, P., Singh, S. K., & Chittasupho, C. (2025) · Polymers · doi:10.3390/polym17040435 · Cited by 35
“Following this classification, adherence to class norms is required [141].”
Ramakrishnan, P., Ramakrishnan, R., Jalaludeen, A. M., Jayakumar, R., Gimbun, J., Ranganathan, B., Mohamed, S. B., Sridhar, T. M., Gunasekaran, S. S., MubarakAli, D., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.139663 · Cited by 37
Polymer‐ and Lipid‐Based Nanostructures Serving Wound Healing Applications: A Review
Cetin, F. N., Mignon, A., Vlierberghe, S. V., & Kolouchová, K. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402699 · Cited by 36
Casula, L., Zidar, A., Kristl, J., Jeras, M., Kralj, S., Fadda, A. M., & Zupančič, Š. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15041245 · Cited by 30
“Several nanomaterial-based systems have been introduced into the areas of wound healing and skin regeneration, among which electrospun polymeric nanofibers have been recognized as efficient systems to promote skin regeneration [8].”
BackgroundElectrospinning-based bone tissue scaffold construction: Progress and trends
Ma, Y., Zhou, R., Yang, M., Zhang, J., Song, W. F., Ma, X., Liu, M., Cui, X., Li, B., Zhang, Y., et al. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.113792 · Cited by 37
Characterization of Electrospinning Chitosan Nanofibers Used for Wound Dressing
Ali, S. H., Mahammed, M. A., & Yasin, S. A. (2024) · Polymers · doi:10.3390/polym16141984 · Cited by 27
“This versatility allows for the production of nanofibers with tailored properties suitable for various applications such as tissue engineering, drug delivery, filtration, and wound dressing [8].”
BackgroundSelf-assembled peptide-based nanofibers for cardiovascular tissue regeneration
Shenoy, D., Chivukula, S., Erdoğan, N., Chiesa, E., Pellegrino, S., Reches, M., & Genta, I. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb01235f · Cited by 27
Caracciolo, P. C., Abraham, G. A., Battaglia, E. S., & Abel, S. B. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15071964 · Cited by 29
“These para eters enco pass various aspects including the properties of the polymeric solution, the electrohydrodynamic process, and the environmental conditions [57,60].”
BackgroundGhadirian, S., Karbasi, S., Kharazi, A. Z., & Setayeshmehr, M. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03024-4 · Cited by 25
“Electrospinning has shown great potential in various fields, including tissue engineering, drug delivery, and filtration, due to the high surface area-to-volume ratio and unique properties of the nanofibers [13–15].”
Perspectives of nanofibrous wound dressings based on glucans and galactans - A review
Latiyan, S., Kumar, T. S. S., Doble, M., & Kennedy, J. F. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125358 · Cited by 26
Harnessing electrospinning for improvement of polymeric drug delivery systems
Concha, V. O. C., Bahú, J. O., Crivellin, S., Khouri, N. G., Munoz, F. L., de Souza, S. D. A., Yoshida, M. C. P., Severino, P. B., Concha, L. S. C., Lopes, M. S., et al. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05710-w · Cited by 23
“The production of the nanofibers in loco using such portable electrospinning devices eliminates the need of storage and handling of sensitive drug-loaded nanofibers, improving their stability [41].”
Advances and applications of crosslinked electrospun biomacromolecular nanofibers
Mohammadi, M. A., Alizadeh, A. M., Mousavi, M., Hashempour‐Baltork, F., Kooki, S., Shadan, M. R., Hosseini, S. M., & McClements, D. J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132743 · Cited by 23
Pan, C.-T., Ghosh, S., Wu, C.-M. T. 吳., Shiue, Y., & Rahim, M. S. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12302-0 · Cited by 19
“…its impact on electro-spinnability and fibre architecture [46, 47], toxicological risks associated with conventional solvent systems [48], including their health and safety implications, and environmental concerns surrounding solvent use, disposal, and potential for sustainable alternatives [49].”
Electrospun Naringin-Loaded Fibers for Preventing Scar Formation during Wound Healing
Tottoli, E. M., Benedetti, L., Chiesa, E., Pisani, S., Bruni, G., Genta, I., Conti, B., Ceccarelli, G., & Dorati, R. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15030747 · Cited by 19
“As already mentioned in the introduction, an ideal advanced dressing must provide a correct moisture balance to create a healing in a humid condition and prevent the risk of maceration and eschar formation [9,10].”
BackgroundSorkhabi, T. S., Fallahi-Samberan, M., & Kumaravel, V. (2023) · Molecules · doi:10.3390/molecules28145439 · Cited by 19
Compendium of Safety Regulatory for Safe Applications of Aerogels
Boccia, A. C., Pulvirenti, A., García‐González, C. A., Grisi, F., & Neagu, M. T. (2023) · Gels · doi:10.3390/gels9110842 · Cited by 17
“Recently, the new emerging applications include aerogels as textiles for wound medical applications [23,24], face masks [25] Recently, the new emerging applications include aerogels as textiles for wound care medical applications [23,24], face masks [25] and tissue engineering applications [26,27],…”
BackgroundSchulte-Werning, L. V., Singh, B., Johannessen, M., Engstad, R. E., & Holsæter, A. M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124136 · Cited by 23
Multifunctional bilayer dressings: a next generation biomaterial for enhanced wound healing
Bhardwaj, D., Kumar, S., & Agrawal, G. (2025) · Biomaterials Science · doi:10.1039/d5bm00095e · Cited by 19
Advanced drug delivery systems for the management of local conditions
López-Vidal, L., Juskaite, K., Ramöller, I. K., Real, D. A., McKenna, P. E., Priotti, J., Donnelly, R. F., & Paredes, A. J. (2024) · Therapeutic Delivery · doi:10.1080/20415990.2024.2437978 · Cited by 21
Vencato, A. A., Clerici, N. J., Juchem, A. L. M., Veras, F. F., Rolla, H. C., & Brandelli, A. (2024) · Discover Nano · doi:10.1186/s11671-024-04084-8 · Cited by 16
“Considering that nanofibers could be commercially used as active materials, they probably have to meet regulatory requirements [62].”
Optically pH-Sensing in smart wound dressings towards real-time monitoring of wound states: A review
Gu, H., Sun, X., Bao, H., Feng, X., & Chen, Y. (2025) · Analytica Chimica Acta · doi:10.1016/j.aca.2025.343808 · Cited by 16
Chiloeches, A., Zágora, J., Plachá, D., Torres, M. D. T., de la Fuente‐Núñez, C., López, F., Gil-Romero, Y., Fernández-García, R., Fernández‐García, M., Echeverría, C., et al. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00576 · Cited by 15
Electrospun nanofibers, process, merits, challenges, and usefulness: A review
Islam, R., Islam, K. S., Chowdhury, N., Mitra, P., Dutta, A., Supal, A. R., Sultana, N., & Iqbal, S. M. F. (2025) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250251359274 · Cited by 23
Diwan, T., Al-Furaiji, M. H., Abudi, Z. N., Awad, M., & Alsalhy, Q. F. (2024) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25449 · Cited by 15
Oliyaei, N., Altemimi, A. B., Abedi, E., & Hashemi, S. M. B. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.142318 · Cited by 13
Enhanced gas sensor performances of Y-doped nickel ferrite nanofibers with a rapid response
Gao, S., Wang, Z., Chen, Y., Wang, Y., Fu, Q., & Feng, C. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.02.365 · Cited by 12
Xu, H., Peng, Z., Yang, Y., Yin, C., Li, X., Liu, H., Li, S., Luo, Y., & Zhou, L. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c01192 · Cited by 12
Biomedical applications of poly(lactic acid) electrospun nanofibers: A review
Pan, X., Jiang, Q., Zhong, Y., Cui, P., Hao, W., & Yang, W. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.146977 · Cited by 16
Ranatunga, B., Sekar, M., Hashmi, A. R., Zahra, F., Ravi, R. N., Kumar, B. R. P., Hamod, M. A., Hamood, N. A., Begum, M. Y., Wong, L., et al. (2026) · Drug Design Development and Therapy · doi:10.2147/dddt.s578261 · Cited by 15
Development and Characterization of Novel Anisotropic Skin Graft Simulants
Gupta, V., Singla, R., & Chanda, A. (2023) · Dermato · doi:10.3390/dermato3020010 · Cited by 11
“They are often used in cases where there is not enough healthy tissue to cover a wound or in cases where the skin needs to be stretched to cover a larger area [29].”
BackgroundRahman, M., Kotturi, H. S. R., Nikfarjam, S., Bhargava, K., Ahsan, N., & Khandaker, M. (2024) · Membranes · doi:10.3390/membranes14020036 · Cited by 11
Liu, J., Wang, K., Jin, F., Li, J., Bin, Y., & Qian, X. (2025) · Nanomaterials · doi:10.3390/nano15120909 · Cited by 12
“Subsequently, the jet extends and the solvent evaporates while the jet solidifies, forming a nonwoven fibrous matrix due to the deposition of ultrafine fibers onto the collector [7–10].”
Handheld electrospinning technologies: a comprehensive review
Bakhshi, A., Bakhshi, M., Hosseine, M., Shamsnia, H. S., & Samadi, A. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101614 · Cited by 10
Exploring polymeric nanotextile devices: progress and outlook
Idumah, C. I., Odera, R. S., & Ezeani, E. O. (2024) · International Journal of Clothing Science and Technology · doi:10.1108/ijcst-06-2023-0087 · Cited by 11
Advances in Photothermal Electrospinning: From Fiber Fabrication to Biomedical Application
Liu, J., Wang, K., Jin, F., Bin, Y., Li, J., & Qian, X. (2025) · Polymers · doi:10.3390/polym17131725 · Cited by 10
“The resulting fibrous materials possess unique advantages, including their high specific surface area, tunable porosity, and exceptional structural design flexibility [3–6].”
Liang, G., Zhang, W., Zhang, X., Yu, J., Zhang, S., & Ding, B. (2024) · Composites Communications · doi:10.1016/j.coco.2024.102006 · Cited by 9
Vencato, A. A., Clerici, N. J., Rigotti, M., Branco, C. S., Carra, S., Malvessi, E., & Brandelli, A. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143112 · Cited by 9
Progress on encapsulation and entrapment of enzymes in electrospun nanofibers
Eer, K. X., Rahman, R. A., & Alewi, N. A. M. (2025) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-025-03244-z · Cited by 17
“The formation of the Taylor cone occurs when the surface tension is balanced by electrostatic forces, resulting in an increased accumulation of charges at the cone’s surface [25].”
Gong, K. N., Wei, S., Zhang, X. N., & Liu, W. N. (2025) · Reviews in Cardiovascular Medicine · doi:10.31083/rcm45083 · Cited by 17
“Current research efforts to address this issue mainly focus on developing solvent-free or low-toxicity alternatives, such as melt electrospinning and aqueous electrospinning, and improving the processing parameters to enhance the efficiency of solvent evaporation [108–110].”
Hosseinidoust, S., Ghaee, A., Abednejad, A. S., & Ghoreyshi, S. M. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03606-4 · Cited by 9
Mohammadi, M. A., Alizadeh, A. M., Mohammadi, M., Mirzakhani, E., Sabouri, S., Pourjafar, H., & Hosseini, S. M. (2023) · Food and Bioprocess Technology · doi:10.1007/s11947-023-03251-6 · Cited by 11
“Although electrospinning is an old technique, it has recently developed rapidly after the structural features of nanofibers produced by this technique were discovered (Keirouz et al., 2023; Uhljar & Ambrus, 2023; Wang et al., 2023).”
Electrospun meshes for abdominal wall hernia repair: Potential and challenges
Liu, Z., Liu, L., Liu, J., Wu, J., Tang, R., & Wolfram, J. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.01.028 · Cited by 9
Electrospun Fiber Mats with Metronidazole: Design, Evaluation, and Release Kinetics
Adamczyk, O., Deptuch, A., Tarnawski, T. R., Zieliński, P. M., Drzewicz, A., & Juszyńska‐Gałązka, E. (2025) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5c00873 · Cited by 9
Wu, Z. W., Yao, X., Xing, Y., Huang, P., Li, B., & Liu, L. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.136957 · Cited by 6
PVA nanofibers: electrospinning techniques and pharmaceutical applications
Yavari, A., Ito, T., Yamazoe, E., Hara, K., & Tahara, K. (2025) · Therapeutic Delivery · doi:10.1080/20415990.2025.2582465 · Cited by 10
Single‐Cell Liquid‐Core Microcapsules for Biomedical Applications
Pires‐Santos, M., Carreira, M., Morais, B. P., Perfeito, F. G., Oliveira, M. B., Monteiro, C. F., Nadine, S., & Mano, J. F. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202403808 · Cited by 9
Application of PLCL as a biodegradable polymer in biomedical engineering
Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7
“The high speci fi c surface area of electrospinning is conducive to cell attachment and growth, and the porous structure is conducive to the in fi ltration and exchange of nutrients [75 – 77].”
Diclofenac-Loaded Orodispersible Nanofibers Prepared by Double-Needle Electrospinning
Uhljar, L. É., Jáger, T., Hajdu, C., Motzwickler-Németh, A., Jójárt‐Laczkovich, O., Cseh, M., Burián, K., & Ambrus, R. (2025) · Polymers · doi:10.3390/polym17091262 · Cited by 6
“The ES process and the produced NF morphology are influenced by several factors which can be grouped as material properties, process parameters, and ambient parameters [15].”
Self-citationKwon, M., & Kim, K. S. (2025) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-025-00729-6 · Cited by 9
Biopolymer-based electrospinning nanoarchitectonics for advancement in tissue regeneration
Keerthii, R., Sre, V. V., & Khan, S. S. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107031 · Cited by 9
Spontaneous Recycling of Electrosprayed Sample by Retrograde Motion of Microdroplets
Ochirov, O., & Urban, P. L. (2024) · Journal of the American Society for Mass Spectrometry · doi:10.1021/jasms.3c00444 · Cited by 6
Current Strategies to Produce 3D Electrospun-Based Wound Dressings for Skin Regeneration
Ferreira, C. A. M., Lemos, M. F. L., Maurício, A. C., & Dias, J. R. (2025) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2025.2524625 · Cited by 8
“[34] 141] Most of the studies focus on in vitro , and only a minority performed in vivo tests in rodents (mice and rats), favored for their ease of handling, inexpensive of keeping and anesthetizing, and provide quicker results.”
Sun, X., Ren, H. T., Cui, Y.-C., Liu, Q., Li, J., & Gao, J. (2024) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2024.114350 · Cited by 5
Zhang, S., Yao, Y., Wang, C., Xiao, C., Yan, X., Qi, J., Zhou, Y., Zhu, Z., Yang, Y., & Li, J. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127694 · Cited by 4
Sujith, S., Ravisankar, J., & Solomon, A. P. (2026) · Microbial Pathogenesis · doi:10.1016/j.micpath.2026.108402 · Cited by 6
Liang, J., Zou, Y., Ju, H., & Lv, Y. (2024) · International Journal of Polymeric Materials · doi:10.1080/00914037.2024.2439813 · Cited by 5
“Previous reviews focused on environmental influences, equipment parameter adjustments during electrospinning preparation [19] , material selection [20] , fiber morphology, and chemical stimulation [21] in relation to cell behavior and biomedical applications.”
Luo, Y., Hu, Y., Peng, T., Wen, L., Zhang, Z., Liu, Y., Chen, C.-X., Wu, Y., Liu, Z., Liu, Q., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166917 · Cited by 4
Wani, S. S., Rather, A. H., Kabli, S. A., Hamid, I., Khan, R. S., Beigh, M. A., Majeed, S., & Sheikh, F. A. (2025) · Carbon letters · doi:10.1007/s42823-025-00957-9 · Cited by 3
“The process begins with a polymer droplet at a syringe tip, which, under high voltage (typically 5–30 kV), forms a Taylor cone—a conical structure stabilized by the balance between surface tension and electrostatic repulsion [17, 18].”
Soft tissue scaffold fabrication based on electrospinning: Application and prospect
Ma, Y., Zhou, R., Yang, M., Zhang, J., Song, W. F., Ma, X., Liu, M., Cui, X., Li, B., Zhang, Y., et al. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103660 · Cited by 6
Lima, N. P., Maciel, G. M., Pinheiro, D. F., Lima, N. F., Ribeiro, I. S., Pedro, A. C., & Haminiuk, C. W. I. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101378 · Cited by 4
Healing the wound with nanomedicine: The therapeutic potential of liposomes and nanofibers
Casula, L., Adeela, Y., Lai, F., Bradić, J., Schlich, M., Dragićević, N., & Sinico, C. (2026) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2026.108314 · Cited by 4
Elavarasi, A., Sre, V. V., & Khan, S. S. (2026) · Polymer Bulletin · doi:10.1007/s00289-026-06564-6 · Cited by 3
Brako, F., & Nkwo, M. S. (2024) · Pharmaceutical Development and Technology · doi:10.1080/10837450.2024.2395422 · Cited by 5
“Indeed, the limited regulatory guidelines on fibre-based medicines and medical devices translate fibre-based delivery systems into beneficial healthcare interventions even more challenging (Uhljar and Ambrus 2023).”
Maxillary sinus floor augmentation using sponge- and cotton-like graft materials in a rabbit model
Ohba, S., Shido, R., Yamamoto, H., Hara, M., Nishikawa, Y., Kasuga, T., Yamada, T., Sumita, Y., & Shirota, T. (2024) · Journal of Oral Biosciences · doi:10.1016/j.job.2024.100586 · Cited by 3
Rownaghi, M., Jahromi, M. K., Esfandiari, A., & Niakousari, M. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108911 · Cited by 2
Tang, Y., Lai, P., Hu, Z., Luo, Y., Wang, H., & Yu, L. (2023) · Review of Scientific Instruments · doi:10.1063/5.0155416 · Cited by 4
Biomedical applications of functional nanofibres
Ghorbanpoor, H., Soykan, M. N., Benzait, Z., Altuğ, B., Ekenel, E. Q., Ebrahimi, A., Kılıç, A., Uysal, O. K., & Avcı, H. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-21519-3.00001-7 · Cited by 2
Barbu, V. S. B., Marinaș, I. C., Gaboreanu, D. M., Nica, I. C., Brîncoveanu, O., Geană, E., Oprea, O., Boldeiu, A., PĂUN, A. M., Mareş, C., et al. (2025) · Antibiotics · doi:10.3390/antibiotics14111166 · Cited by 1
Alkanakri, N., Molnár, K., Minofar, B., Fejes, Z., Abdullah, K. K., & Owen, M. C. (2025) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5c06703 · Cited by 1
Silva, H. B. D., Delbusso, A., Dai, Y., Gültekinoğlu, M., Homer‐Vanniasinkam, S., & Edirisinghe, M. J. (2026) · ACS Polymers Au · doi:10.1021/acspolymersau.5c00174 · Cited by 1
Sirichaicharoenkol, K., Ruamrattanasin, P., Sukbovornkul, C., Ejeta, S. Y., Thach, U. D., Huang, C., & Jamnongkan, T. (2026) · ACS Omega · doi:10.1021/acsomega.6c02169 · Cited by 1
Jiang, H., Liu, X., Liu, R., Liu, Y., Zhu, J., Kong, Z., Xu, W., & Wang, Y. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71109 · Cited by 1
“At present, no clear regulatory framework has yet been established for medical devices containing nanomaterials [ 348 ].”
Sri Balajee., A., & Akiladevi, D. (2024) · Journal Of Advanced Zoology · doi:10.53555/jaz.v45i3.3825 · Cited by 1
Electrospun nanofibers as potential medical devices: Short review from a regulatory perspective
Uhljar, L. É., Csóka, I., & Ambrus, R. (2023) · Macedonian Pharmaceutical Bulletin · doi:10.33320/maced.pharm.bull.2023.69.03.027
Self-citationAdult stem cells in regenerative medicine of respiratory system
Yaghoubi, A., Nazarnezhad, S., Asgharzadeh, F., Saeinasab, M., & Sefat, F. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-34152-6.00008-1
Owen, M. C., Alkanakri, N., Molnár, K., Minofar, B., Fejes, Z., & Abdullah, K. K. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5379655
Innovative Approaches to Corneal Regeneration: From Biomaterials to Clinical Application
Visalli, F., Gagliano, C., D’Esposito, F., Musa, M., Tognetto, D., & Zeppieri, M. (2025) · Sustainable materials and technology · doi:10.1007/978-981-96-9904-9_18
Inoue, J., Kazama, T., Okubo, T., Akita, D., Arai, Y., Hagiwara, Y., Kano, K., Honda, M. J., & Matsumoto, T. (2025) · Bioengineering · doi:10.3390/bioengineering12121364
“…bone graft material exhibits superior operability and has demonstrated potential applications as a wound dressing and tissue engineering scaffold [41]; however, since in vivo studies are still limited, we aimed to assess its capacity to promote bone augmentation by applying it around a titanium…”
Microfabrication techniques for hemostatic biomaterials
Velidandi, A., Jayarambabu, N., & Varaprasad, K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-34246-2.00014-x
Sami, A., Hariharan, K., & Mehta, T. A. (2026) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-026-10508-y
Segura, D. A. C., Vázquez, V. S., Mendoza, S., Toxqui-López, S., Arellanes-Lozada, P., & Vázquez, C. S. (2026) · Polymers · doi:10.3390/polym18080972
Capuana, E., Brucato, V., & Carrubba, V. L. (2026) · Pharmaceuticals · doi:10.3390/ph19050683
“The classification of cell-seeded SES–MEW constructs further complicates the regulatory pathway, because such constructs fall under the ATMP framework, requiring EMA authorization and GMP-compliant manufacturing [142].”
Guo, L., Hu, Z., Yang, L., Bai, H., Zhang, W., & Yin, L. (2026) · Biomedical Materials · doi:10.1088/1748-605x/ae7789
“As illustrated in figure 1, the drug-loaded electrospun fibrous membranes were prepared by the coaxial-electrospinning methods [33–36].”
Nanofibers and nanotubes for biomedical applications
Kapoor, A., Trivedi, M., Pandey, S., & Misra, S. K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-44119-6.00011-2
Türkmen, E., Pınar, S. G., Kara, A. A., Oktay, A. N., & ÇELEBİ, N. (2026) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2026.108692
Uhljar, L. É., Tagscherer, Z. V., & Ambrus, R. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18091056
“In the textile industry, electrospun nanofibers enable the fabrication of functional fabrics with properties such as antibacterial activity, water repellency, and enhanced breathability, particularly for protective clothing [6].”
Self-citationNanofibrous scaffolds for cancer management
Morya, N., Hirave, K. S., Kumar, L., Erandole, S., Banerjee, D., Singh, A., & Saharan, V. A. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-44185-1.00022-7
Metadata
- Authors
- Uhljar, L. É., & Ambrus, R.
- Affiliations
- University of Szeged (HU)
- Corresponding author
- Ambrus, Rita
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2023-01-26
- Volume
- 15
- Issue
- 2
- Pages
- 417
- ISSN
- 1999-4923 (ISSN-L)
- PMC
- PMC9965305
- OpenAlex
- W4318204417
- Semantic Scholar
- a0ee75c042054ec481325e17c8050b001a071ceb
- Cited by
- 108
- References
- 148
- Citations by year
- 2026: 26 · 2025: 41 · 2024: 23 · 2023: 18
- FWCI
- 1.89
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Pharmaceutics (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Human Capacities, Hungary (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Hungarian–Slovenian Bilateral project (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Gedeon Richter’s Talentum Foundation, Gedeon Richter Plc (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Keywords
- electrospinning, electrospun nanofibers, medical devices, wound dressings, tissue engineering scaffolds, face masks, nanofiber morphology, medical device regulation, nanotechnology regulation, drug delivery systems, soft electronics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.