Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach
Open accessThe DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Abstract
Electrospinning is the simplest and most widely used technology for producing ultra-thin fibers. During electrospinning, the high voltage causes a thin jet to be launched from the liquid polymer and then deposited onto the grounded collector. Depending on the type of the fluid, solution and melt electrospinning are distinguished. The morphology and physicochemical properties of the produced fibers depend on many factors, which can be categorized into three groups: process parameters, material properties, and ambient parameters. In the biomedical field, electrospun nanofibers have a wide variety of applications ranging from medication delivery systems to tissue engineering scaffolds and soft electronics. Many of these showed promising results for potential use as medical devices in the future. Medical devices are used to cure, prevent, or diagnose diseases without the presence of any active pharmaceutical ingredients. The regulation of conventional medical devices is strict and carefully controlled; however, it is not yet properly defined in the case of nanotechnology-made devices. This review is divided into two parts. The first part provides an overview on electrospinning through several examples, while the second part focuses on developments in the field of electrospun medical devices. Additionally, the relevant regulatory framework is summarized at the end of this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The high specific surface area of electrospinning is conducive to cell attachment and growth, and the porous structure is conducive to the infiltration and exchange of nutrients [75–77].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [77]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Zhu, C., Cao, R., Zhang, Y., & Chen, R. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.660571 · Cited by 22
RetractedElectrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028 · cited 1×
“The majority of papers showed a significant indirect influence of temperature on fiber diameter and morphology, concluding that the inverse connection between temperature and viscosity may be exploited to modify nanofibers [34,35].”
BackgroundElectrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305 · cited 1×
“The cone is named after Sir Geoffrey Taylor, who first modeled the phenomenon in 1964 [8].”
BackgroundElectrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289 · cited 1×
“In this way, the flight distance of the jet (tip-to-collector distance in the case of nozzle electrospinning) affects the fiber morphology [3,18].”
BackgroundElectrospinning jets and polymer nanofibers
Reneker, D. H., & Yarin, A. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.002 · Cited by 2,306
Skin Wound Healing Process and New Emerging Technologies for Skin Wound Care and Regeneration
Tottoli, E. M., Dorati, R., Genta, I., Chiesa, E., Pisani, S., & Conti, B. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12080735 · Cited by 1,340 · cited 1×
“As in wound dressings and tissue engineering, the ability of nanofibers to produce aligned scaffolds capable of mimicking the extracellular matrix is exploited [74,75].”
BackgroundDirect Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning
Li, D., & Xia, Y. (2004) · Nano Letters · doi:10.1021/nl049590f · Cited by 1,300
Electrospinning of polymeric nanofibers for drug delivery applications
Hu, X., Liu, S., Zhou, G., Huang, Y., Xie, Z., & Jing, X. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.018 · Cited by 1,190 · cited 1×
“Additional benefits are the tailorable release profile, the high loading capacity, the high encapsulation efficiency, the ease of operation, and the cost-effectiveness [73].”
BackgroundIndustrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, C., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 965
Study on morphology of electrospun poly(vinyl alcohol) mats
Zhang, C., Yuan, X., Wu, L., Han, Y., & Sheng, J. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.027 · Cited by 829 · cited 2×
“Furthermore, there are even reports showing an increase in fiber diameter with increasing voltage [14,15].”
BackgroundElectrospinning for drug delivery applications: A review
Luraghi, A., Peri, F., & Moroni, L. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.03.033 · Cited by 746 · cited 2×
“The method is very similar to single-needle solution electrospinning; however, the obtained nanofibers have a core–shell structure [59].”
BackgroundMethodProcessing and microstructural characterization of porous biocompatible protein polymer thin films
Buchko, C. J., Chen, L. C., Shen, Y., & Martin, D. C. (1999) · Polymer · doi:10.1016/s0032-3861(98)00866-0 · Cited by 714 · cited 2×
“Generally, a higher applied voltage stretches the polymer liquid more, resulting in thinner fibers [12,13].”
BackgroundThe effect of temperature and humidity on electrospinning
De Vrieze, S., Van Camp, T., Nelvig, A., Hagström, B., Westbroek, P., & De Clerck, K. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3010-6 · Cited by 593
Mit‐uppatham, C., Nithitanakul, M., & Supaphol, P. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400225 · Cited by 579
Foulkes, R., Man, E., Thind, J., Yeung, S., Joy, A., & Hoskins, C. (2020) · Biomaterials Science · doi:10.1039/d0bm00558d · Cited by 568 · cited 2×
“However, regarding nanomedicines and health-related nanomaterials, the number of guidelines is not satisfactory, which can affect the attitude of the industry negatively [5].”
BackgroundMelt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542 · cited 1×
“Yet, the higher viscosity provides higher stability of the jet compared with the polymer solution jet, which results in better control of the fiber deposition on the collector [64].”
BackgroundAdeli, H., Khorasani, M. T., & Parvazinia, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.115 · Cited by 512
Lee, J. S., Choi, K. H., Ghim, H. D., Kim, S. S., Chun, D. H., Kim, H. Y., & Lyoo, W. S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20602 · Cited by 410 · cited 1×
“Generally, a higher applied voltage stretches the polymer liquid more, resulting in thinner fibers [12,13].”
BackgroundMelt-electrospinning part I: processing parameters and geometric properties
Lyons, J., Li, C., & Ko, F. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.071 · Cited by 401 · cited 1×
“The two main disadvantages of syringe-based melt electrospinning are the potential degradation of the polymer or active ingredient at high temperatures and the larger fiber diameter with less controllable morphology compared with solvent electrospinning [66].”
BackgroundThe thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399 · cited 1×
“If the environmental temperature was below the glass transition temperature of the polymer, the too fast solidification of the jet led to an increased fiber diameter [65].”
BackgroundAnalysis of the Effects of Solution Conductivity on Electrospinning Process and Fiber Morphology
Angammana, C. J., & Jayaram, S. H. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2127431 · Cited by 382 · cited 1×
“A further increase in conductivity resulted in intermittent or no jet [27].”
BackgroundZuo, W., Zhu, M., Yang, W., Yu, H., Chen, Y., & Zhang, Y. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20304 · Cited by 381 · cited 1×
“6 mL/h, and 9 mL/h, holding all other parameters constant, then beads were observed with an average size of 8 μm, 14 μm, and 23 μm, respectively [26].”
BackgroundELECTROHYDRODYNAMIC ATOMIZATION IN THE CONE–JET MODE PHYSICAL MODELING OF THE LIQUID CONE AND JET
Hartman, R. P. A., Brunner, D. J., Camelot, D. M. A., Marijnissen, J. C. M., & Scarlett, B. (1999) · Journal of Aerosol Science · doi:10.1016/s0021-8502(99)00033-6 · Cited by 363
Electrospun polymeric nanofibres as wound dressings: A review
Miguel, S. P., Figueira, D. R., Simões, D., Ribeiro, M. P., Coutinho, P., Ferreira, P., & Correia, I. J. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.05.011 · Cited by 362
Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration
Wang, Z., Wang, Y., Yan, J., Zhang, K., Lin, F., Xiang, L., Deng, L., Guan, Z., Cui, W., & Zhang, H. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.007 · Cited by 344
Continuous yarns from electrospun fibers
Smit, E., Bűttner, U., & Sanderson, R. D. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.002 · Cited by 343 · cited 1×
“Another collector type is the liquid bath collector, which can be used to obtain special three-dimensional electrospun fiber mats collected in a non-solvent, mainly water, ethanol, or methanol [22,23].”
BackgroundApplications of chitin and chitosan nanofibers in bone regenerative engineering
Tao, F., Cheng, Y., Shi, X., Zheng, H., Du, Y., Xiang, W., & Deng, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115658 · Cited by 341
Electro-Spinning and Electro-Blowing of Hyaluronic Acid
Um, I. C., Fang, D., Hsiao, B. S., Okamoto, A., & Chu, B. (2004) · Biomacromolecules · doi:10.1021/bm034539b · Cited by 338 · cited 1×
“The nanofiber formation was consistent and uniform at 57 ◦C blown-air temperature [71].”
BackgroundElectrospun polymer micro/nanofibers as pharmaceutical repositories for healthcare
Feng, X., Li, J., Zhang, X., Liu, T., Ding, J., & Chen, X. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.03.020 · Cited by 322
Nanofibers for Biomedical and Healthcare Applications
Rasouli, R., Barhoum, A., Bechelany, M., & Dufresne, A. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800256 · Cited by 319 · cited 1×
“As in wound dressings and tissue engineering, the ability of nanofibers to produce aligned scaffolds capable of mimicking the extracellular matrix is exploited [74,75].”
BackgroundLi, D., McCann, J. T., & Xia, Y. (2005) · Small · doi:10.1002/smll.200400056 · Cited by 313
Polymer scaffolds as drug delivery systems
Calori, I. R., Braga, G., de Jesus, P. D. C. C., Bi, H., & Tedesco, A. C. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109621 · Cited by 288 · cited 1×
“, approximately 90% of the ultrafine-based scaffolds were produced by solvent electrospinning in 2020 [41].”
BackgroundLayered nanofiber sponge with an improved capacity for promoting blood coagulation and wound healing
Zhang, K., Bai, X., Yuan, Z., Cao, X., Jiao, X., Li, Y., Qin, Y., Wen, Y., & Zhang, X. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.008 · Cited by 283 · cited 1×
“Wound dressing Single-needle solution ES CS/PVA 80% AcOH, DW NaBH4 solution (3D layered NF sponge creation) 3T3 mouse fibroblasts, JB6 epidermal cells, C57BL/6 mice [93]”
MethodChronic Wounds: Evaluation and Management.
Bowers, S. P., & Franco, E. (2020) · PubMed · Cited by 282
Augustine, R., Rehman, S. R. U., Ahmed, R., Zahid, A. A., Sharifi, M., Falahati, M., & Hasan, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.207 · Cited by 273
Rogina, A. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.01.098 · Cited by 272 · cited 2×
“Nevertheless, some fields (mainly tissue engineering) require structured scaffolds with aligned fibers [19].”
BackgroundElectrospun nanofiber-based soft electronics
Wang, Y., Yokota, T., & Someya, T. (2021) · NPG Asia Materials · doi:10.1038/s41427-020-00267-8 · Cited by 267
Wu, S., Dong, T., Li, Y., Sun, M., Qi, Y., Liu, J., Kuss, M. A., Chen, S., & Duan, B. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101473 · Cited by 250
Ullah, S., Ullah, A., Lee, J., Jeong, Y., Hashmi, M., Zhu, C., Joo, K. I., Cha, H. J., & Kim, I. S. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01562 · Cited by 244
Core/Shell Nanofibers with Embedded Liposomes as a Drug Delivery System
Mickova, A., Buzgo, M., Benada, O., Rampichova, M., Fisar, Z., Filova, E., Tesarova, M., Lukas, D., & Amler, E. (2012) · Biomacromolecules · doi:10.1021/bm2018118 · Cited by 237
Electrospinning based on benign solvents: current definitions, implications and strategies
Avossa, J., Herwig, G., Toncelli, C., Itel, F., & Rossi, R. M. (2022) · Green Chemistry · doi:10.1039/d1gc04252a · Cited by 233
Critical attributes of nanofibers: Preparation, drug loading, and tissue regeneration
Pelipenko, J., Kocbek, P., & Kristl, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.043 · Cited by 231 · cited 2×
“If the core polymer solution has a very low concentration, then once the solvent evaporates, only a film layer of the polymer remains on the inner surface of the shell polymer, while the rest is an empty core [35].”
BackgroundNeedleless electrospinning of nanofibers with a conical wire coil
Wang, X., Niu, H., Lin, T., & Wang, X. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21377 · Cited by 229
Leung, W. W. F., & Sun, Q. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.116886 · Cited by 229
Chanda, A., Adhikari, J., Ghosh, A., Chowdhury, S. R., Thomas, S., Datta, P., & Saha, P. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.05.099 · Cited by 226
Movahedi, M., Asefnejad, A., Rafienia, M., & Khorasani, M. T. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.233 · Cited by 213
Collins, G., Federici, J., Imura, Y., & Catalani, L. H. (2012) · Journal of Applied Physics · doi:10.1063/1.3682464 · Cited by 196 · cited 1×
“Generally, electrospinning is driven by the electrostatic potential characterized by high voltage (some tens of kV) and very low current (10−7–10−3 mA) [6].”
BackgroundControlling electrospun nanofiber morphology and mechanical properties using humidity
Huang, L., Bui, N., Manickam, S. S., & McCutcheon, J. R. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22371 · Cited by 192
Branching in electrospinning of nanofibers
Yarin, A. L., Kataphinan, W., & Reneker, D. H. (2005) · Journal of Applied Physics · doi:10.1063/1.2060928 · Cited by 187 · cited 1×
“It is also notable that applying too high of a voltage forces the primary jet to emerge into several secondary jets, forming multiple jets that lead to beads and non-uniform fibers [16].”
BackgroundNanofibers from gas-assisted polymer melt electrospinning
Zhmayev, E., Cho, D., & Joo, Y. L. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.058 · Cited by 186
Partheniadis, I., Nikolakakis, I., Laidmäe, I., & Heinämäki, J. (2020) · Processes · doi:10.3390/pr8060673 · Cited by 177
Electrospun nanofiber scaffold for vascular tissue engineering
Rickel, A. P., Deng, X., Engebretson, D. S., & Hong, Z. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112373 · Cited by 171
(2019) · Springer eBooks · doi:10.1007/978-3-319-53655-2 · Cited by 164
Edge electrospinning for high throughput production of quality nanofibers
Thoppey, N. M., Bochinski, J. R., Clarke, L., & Gorga, R. E. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/34/345301 · Cited by 150
Effect of relative humidity on the morphology of electrospun polymer fibers
Medeiros, E. S. D., Mattoso, L. H. C., Offeman, R. D., Wood, D. F., & Orts, W. J. (2008) · Canadian Journal of Chemistry · doi:10.1139/v08-029 · Cited by 148 · cited 1×
“On the contrary, in the case of hydrophobic polymers, greater humidity leads to the formation of porous nanofibers as a consequence of the complex interaction between water as a non-solvent, the hygroscopic solvent of the polymer, and the polymer itself [38,39].”
BackgroundChen, S., Wang, H., Su, Y., John, J. V., McCarthy, A., Wong, S. L., & Xie, J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.035 · Cited by 140 · cited 1×
“Skin tissue scaffold Single-needle solution ES PCL DCM, DMF Poloxamer 407 BMSCs (C57BL/6 mice) [99]”
MethodUnconfined fluid electrospun into high quality nanofibers from a plate edge
Thoppey, N. M., Bochinski, J. R., Clarke, L., & Gorga, R. E. (2010) · Polymer · doi:10.1016/j.polymer.2010.07.046 · Cited by 137 · cited 1×
“Simple polymer solution reservoirs, such as bowls [51], stepped pyramids [52], or plate-edge spinnerets [53], can be used as stationary spinnerets.”
BackgroundNeedleless electrospinning: influences of fibre generator geometry
Niu, H., Wang, X., & Lin, T. (2011) · Journal of the Textile Institute · doi:10.1080/00405000.2011.608498 · Cited by 132
Fabrication and characterization of starch-TPU based nanofibers for wound healing applications
Mistry, P., Chhabra, R., Muke, S., Narvekar, A., Sathaye, S. S., Jain, R. D., & Dandekar, P. P. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111316 · Cited by 120 · cited 1×
“Wound dressing Single-needle solution ES Starch-TPU DMSO, DMF NHDFs, Sprague Dawley rats [80]”
MethodIn Vitro Drug Release, Permeability, and Structural Test of Ciprofloxacin-Loaded Nanofibers
Uhljar, L. É., Kan, S. Y., Radacsi, N., Koutsos, V., Szabó‐Révész, P., & Ambrus, R. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13040556 · Cited by 119 · cited 1×
“If the feeding rate is increased while the voltage remains constant, the diameter of the collected fibers will increase [24,25].”
BackgroundSelf-citationWu, T. S., Zhang, J., Wang, Y., Li, D., Sun, B., El‐Hamshary, H., Yin, M., & Mo, X. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.072 · Cited by 116
Effect of collector design on the morphological properties of polycaprolactone electrospun fibers
Alfaro De Prá, M. A., Ribeiro-do-Valle, R. M., Maraschin, M., & Veleirinho, B. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.102 · Cited by 115
Recent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing
Huang, C., Xu, X., Fu, J., Yu, D.-G., & Liu, Y. (2022) · Polymers · doi:10.3390/polym14163266 · Cited by 115
Native collagen hydrogel nanofibres with anisotropic structure using core-shell electrospinning
Wakuda, Y., Nishimoto, S., Suye, S.-I., & Fujita, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-24700-9 · Cited by 104
Sun, L., Gao, W., Fu, X., Shi, M., Xie, W., Zhang, W., Zhao, F., & Chen, X. (2018) · Biomaterials Science · doi:10.1039/c7bm00545h · Cited by 103
High throughput of quality nanofibers via one stepped pyramid-shaped spinneret
Jiang, G., Zhang, S., & Qin, X. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.04.084 · Cited by 101
Miguel, S. P., Cabral, . S. D., Moreira, A. F., & Correia, I. J. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.06.063 · Cited by 100 · cited 5×
“Wound dressing Single-needle solution ES Starch-TPU DMSO, DMF - - NHDFs, Sprague Dawley rats [80] Wound dressing Single-needle solution ES Functionalized CS 80% AcOH - PEO (sacrificial polymer), 2-formylphenylboronic acid (imination reactant/reagent) NHDFs [81] Wound dressing Single-needle solution ES Alginate/dextran…”
MethodInfluentialWang, Z., Wang, H., Xiong, J., Li, J., Miao, X., Lan, X., Liu, X., Wang, W., Cai, N., & Tang, Y. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112287 · Cited by 97
Photo-crosslinking of chitosan/poly(ethylene oxide) electrospun nanofibers
Kianfar, P., Vitale, A., Vacche, S. D., & Bongiovanni, R. M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.062 · Cited by 95
Electrospun nanofiber-based respiratory face masks—a review
Naragund, V. S., & Panda, P. K. (2022) · Emergent Materials · doi:10.1007/s42247-022-00350-6 · Cited by 95
Keirouz, A., Zakharova, M., Kwon, J., Robert, C., Koutsos, V., Callanan, A., Chen, X., Fortunato, G., & Radacsi, N. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110939 · Cited by 94 · cited 1×
“On the other hand, rotating spinnerets are half immersed in the polymer solution, and the multiple Taylor cones are formed on the surface of the cylinder [55], disc [56], wire [57], or ball [58], while the rotation ensures a continuous solution supply.”
BackgroundAugustine, R., Dalvi, Y. B., Nath, V., Varghese, R., Raghuveeran, V., Hasan, A., Thomas, S., & Sandhyarani, N. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109801 · Cited by 92
Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole
Surasarang, S. H., Keen, J. M., Huang, S., Zhang, F., McGinity, J. W., & Williams, R. O. (2016) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2016.1220577 · Cited by 90
Zhu, T., Gu, H., Zhang, H., Wang, H., Xia, H., Mo, X., & Wu, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.013 · Cited by 89
Wu, G., Ma, X., Le, F., Gao, Y., Deng, H., & Wang, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108265 · Cited by 88
Nanofiber diameter as a critical parameter affecting skin cell response
Pelipenko, J., Kocbek, P., & Kristl, J. (2014) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.09.022 · Cited by 84
Chen, S., Wang, H., McCarthy, A., Yan, Z., Kim, H. J., Carlson, M. A., Xia, Y., & Xie, J. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00217 · Cited by 84
Alven, S., & Aderibigbe, B. A. (2021) · Polymers · doi:10.3390/polym13132104 · Cited by 84
Electrospun core–shell nanofibers for drug encapsulation and sustained release
Maleki, M., Latifi, M., Tehran, M. A., & Mathur, S. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23426 · Cited by 81
Balogh, A., Farkas, B., Faragó, K., Farkas, A., Wagner, I., Assche, I. V., Verreck, G., Nagy, Z. K., & Marosi, G. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24399 · Cited by 81 · cited 1×
“Except for the spinneret, the setups for melt blowing or melt electrospinning in this investigation (syringe, heater, collector, and other parts) were identical and easily interchangeable [70].”
MethodZadeh, Z. E., Solouk, A., Shafieian, M., & Nazarpak, M. H. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111403 · Cited by 77
Cutting-Edge Enabling Technologies for Regenerative Medicine
(2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2 · Cited by 76
Impact of Apparatus Orientation and Gravity in Electrospinning—A Review of Empirical Evidence
Suresh, S., Becker, A., & Glasmacher, B. (2020) · Polymers · doi:10.3390/polym12112448 · Cited by 74
Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications
Ferraris, S., Spriano, S., Scalia, A. C., Cochis, A., Rimondini, L., Maya, I. C., Guarino, V., Varesano, A., & Vineis, C. (2020) · Polymers · doi:10.3390/polym12122896 · Cited by 70 · cited 1×
“published an article about nanofiber topography and cell behavior [76].”
BackgroundKersani, D., Mougin, J., Lopez, M., Degoutin, S., Tabary, N., Cazaux, F., Janus, L., Maton, M., Chai, F., Sobocinski, J., et al. (2020) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2019.12.017 · Cited by 68
Grumezescu, A. M., Stoica, A. E., Dima-Bălcescu, M.-Ș., Chircov, C., Gharbia, S., Baltă, C., Roșu, M., Herman, H., Holban, A. M., Ficai, A., et al. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8071039 · Cited by 67
Osteochondral Tissue Engineering: The Potential of Electrospinning and Additive Manufacturing
Gonçalves, A. M., Moreira, A., Weber, A., Williams, G. R., & Costa, P. F. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13070983 · Cited by 67
Self-assembly of electrospun nanofibers into gradient honeycomb structures
Yao, T., Chen, H., Samal, P., Giselbrecht, S., Baker, M. B., & Moroni, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107614 · Cited by 66
Effects of solvent on structures and properties of electrospun poly(ethylene oxide) nanofibers
Song, Z., Chiang, S. W., Chu, X., Du, H., Li, J. Z., Gan, L., Xu, C., Yao, Y., He, Y., Li, B., et al. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45787 · Cited by 64
Electrospinning and its potential in fabricating pharmaceutical dosage form
Tan, S. M., Teoh, X.-Y., Hwang, J. L., Khong, Z. P., Sejare, R., Almashhadani, A. Q., Assi, R. A., & Chan, S. Y. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103761 · Cited by 62 · cited 4×
“The nanofibers produced by the side-by-side configuration show two different sides; hence, they are commonly referred to as Janus fibers [20].”
BackgroundInfluentialElectrohydrodynamic quenching in polymer melt electrospinning
Zhmayev, E., Cho, D., & Joo, Y. L. (2011) · Physics of Fluids · doi:10.1063/1.3614560 · Cited by 61
Cai, Y., & Gevelber, M. A. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7544-x · Cited by 58 · cited 1×
“Additionally, vice versa, lower humidity promotes faster drying, which results in thicker fibers [36,37].”
BackgroundVenault, A., Lin, K.-H., Tang, S.-H., Dizon, G. V., Hsu, C.-H., Maggay, I. V., & Chang, Y. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117648 · Cited by 57 · cited 1×
“Wound dressing Single-needle solution ES PVDF, zP(S-r-4VP) zwitterionic copolymer DMF, acetone L929 mouse fibroblast cells, mice [83]”
MethodMultijet motion and deviation in electrospinning
Zheng, Y., Gong, H., & Zeng, Y. (2015) · RSC Advances · doi:10.1039/c5ra06049d · Cited by 53
Vong, M., Speirs, E., Klomkliang, C., Akinwumi, I., Nuansing, W., & Radacsi, N. (2018) · RSC Advances · doi:10.1039/c7ra13278f · Cited by 49
Thomas, M. S., Pillai, P. K. S., Faria, M., Cordeiro, N., Barud, H. D. S., Thomas, S., & Pothen, L. A. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6146-1 · Cited by 48
Preparation and characterization of PLLA/nHA nonwoven mats via laser melt electrospinning
Li, X., Liu, H., Wang, J., & Li, C. (2012) · Materials Letters · doi:10.1016/j.matlet.2011.12.108 · Cited by 47
Effects of electrostatic polarity and the types of electrical charging on electrospinning behavior
Wu, C., Chiou, H., Lin, S., & Lin, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36680 · Cited by 46
Stabilization of chitosan based electrospun nanofibers through a simple and safe method
Fadaie, M., Mirzaei, E., Asvar, Z., & Azarpira, N. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.133 · Cited by 46
Sonseca, Á., Sahay, R., Stępień, K., Bukała, J., Wcisłek, A., McClain, A., Sobolewski, P., Sui, X., Puskas, J. E., Kohn, J., et al. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110505 · Cited by 44
Effect of flow rate on diameter of electrospun nanoporous fibers
Tang, X.-P., Si, N., Xu, L. P., & Liu, H. (2014) · Thermal Science · doi:10.2298/tsci1405447t · Cited by 43 · cited 1×
“If the feeding rate is increased while the voltage remains constant, the diameter of the collected fibers will increase [24,25].”
BackgroundElectrospun and Electrosprayed Scaffolds for Tissue Engineering
Maurmann, N., Sperling, L. E., & Pranke, P. H. L. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2_5 · Cited by 43
The Use of Electrospun Organic and Carbon Nanofibers in Bone Regeneration
Aoki, K., Haniu, H., Kim, Y. A., & Saito, N. (2020) · Nanomaterials · doi:10.3390/nano10030562 · Cited by 43
Suh, T. C., Amanah, A. Y., & Gluck, J. M. (2020) · Bioengineering · doi:10.3390/bioengineering7030105 · Cited by 43
Use of Polycaprolactone Electrospun Nanofiber Mesh in a Face Mask
Khandaker, M., Progri, H., Arasu, D. T., Nikfarjam, S., & Shamim, N. (2021) · Materials · doi:10.3390/ma14154272 · Cited by 42
Fakirov, S. (2016) · Springer eBooks · doi:10.1007/978-3-319-39715-3 · Cited by 40 · cited 1×
“Electrospun nanofibers have various applications under investigation, such as functional textiles, functional clothing, skincare and cosmetics, electronics, acoustics, composites, filters, and biomedical uses [1].”
High-Throughput Fabrication of Quality Nanofibers Using a Modified Free Surface Electrospinning
Shao, Z., Liang, Y., Xu, L. P., & Wang, M. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-2240-4 · Cited by 38
Timnak, A., Gerstenhaber, J. A., Dong, K., Har-el, Y.-E., & Lelkes, P. I. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aadbbe · Cited by 38
Fuchs, A. R., Youssef, A., Seher, A., Hartmann, S., Brands, R. C., Müller-Richter, U. D. A., Kübler, A. C., & Linz, C. (2019) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2019.01.043 · Cited by 37 · cited 2×
“Oral hard- and soft-tissue engineering scaffolds Melt ES writing PCL MG63 human osteoblast-like cells, HaCaT keratinocyte cells, L929 fibroblast cells [40]”
BackgroundMethodCoated electrospun alginate-containing fibers as novel delivery systems for regenerative purposes
Vigani, B., Rossi, S., Sandri, G., Bonferoni, M. C., Milanesi, G., Bruni, G., & Ferrari, F. (2018) · International Journal of Nanomedicine · doi:10.2147/ijn.s175069 · Cited by 36 · cited 5×
“5 PBS PBS (conductivity); P407 and TX100 (surface tension) NHDFs [82]”
InfluentialEilenberg, M., Enayati, M., Ehebruster, D., Grasl, C., Walter, I., Meßner, B., Baudis, S., Potzmann, P. M., Kaun, C., Podesser, B. K., et al. (2019) · European Journal of Vascular and Endovascular Surgery · doi:10.1016/j.ejvs.2019.11.004 · Cited by 36
Anisiei, A., Roșca, I., Sandu, A.-I., Bele, A., Cheng, X., & Marin, L. B. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14010117 · Cited by 36 · cited 5×
“Wound dressing Single-needle solution ES Functionalized CS 80% AcOH PEO (sacrificial polymer), 2-formylphenylboronic acid (imination reactant/reagent) NHDFs [81]”
InfluentialCheng, Y., Zhang, X., Liu, R., Li, Y., Zeng, J., Zhou, M., & Zhao, Y. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200965 · Cited by 36
Maleknia, L., Dilamian, M., Pilehrood, M. K., Sadeghi‐Aliabadi, H., & Hekmati, A. H. (2018) · Research in Pharmaceutical Sciences · doi:10.4103/1735-5362.228957 · Cited by 34
Jing, X., Li, H., Mi, H., Liu, Y., & Tan, Y. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b00935 · Cited by 33
Electrospinning: Application and Prospects for Urologic Tissue Engineering
Zamani, M., Shakhssalim, N., Ramakrishna, S., & Naji, M. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.579925 · Cited by 33
Electrospun Chitosan Nanofibers for Hepatocyte Culture
Feng, Z., Leach, M. K., Chu, X.-H., Wang, Y., Tian, T., Shi, X.-L., Ding, Y., & Gu, Z. (2010) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2010.1159 · Cited by 32 · cited 3×
“In their case, it was necessary to reduce the surface tension with the use of ethanol to form beadless fibers of chitosan [31].”
BackgroundInfluentialBazmandeh, A. Z., Mirzaei, E., Ghasemi, Y., & Kouhbanani, M. A. J. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.07.107 · Cited by 32
Bioengineered intestinal muscularis complexes with long-term spontaneous and periodic contractions
Wang, Q., Wang, K., Solórzano-Vargas, R. S., Lin, P., Walthers, C. M., Thomas, A.-L. A., Martín, M. G., & Dunn, J. (2018) · PLoS ONE · doi:10.1371/journal.pone.0195315 · Cited by 31
Montoya, Y., Cardenas, J., Bustamante, J., & Valencia, R. (2021) · Biomaterials Research · doi:10.1186/s40824-021-00240-8 · Cited by 31
Bolivariana, U. P., Roldán, G., Martínez, Y. Q., Bolivariana, U. P., Gómez, L. M. A., Bolivariana, U. P., Vinasco, L. F. R., Bolivariana, U. P., Palacio, L. M. H., & Bolivariana, U. P. (2017) · Revista Facultad de Ingeniería Universidad de Antioquia · doi:10.17533/udea.redin.n84a05 · Cited by 29
The Possibility of Producing Uniform Nanofibers from Blends of Natural Biopolymers
Abdulkadhim, M. K., & Habeeb, S. A. (2022) · Materials Performance and Characterization · doi:10.1520/mpc20220045 · Cited by 28
Hollow core micro-fiber for optical wave guiding and microfluidic manipulation
Li, B., Li, D., Chen, J., Liu, Z., Wang, G., Zhang, X., Xu, F., & Lu, Y. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.02.084 · Cited by 27
Malakhov, S. N., Belousov, S. I., Shcherbina, M. A., Meshchankina, M. Y., Чвалун, С. Н., & Shepelev, A. D. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16020152 · Cited by 25 · cited 1×
“used a screw extruder instead of a syringe to deliver a constant supply of polymer to the spinneret [68].”
MethodDehghan-Manshadi, N., Fattahi, S., Hadizadeh, M., Nikukar, H., Moshtaghioun, S. M., & Aflatoonian, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109294 · Cited by 25
My, T. N. N., Yang, Y., & Deng, A. (2021) · Polymers · doi:10.3390/polym13224042 · Cited by 25
Electrospun Nanofibers with Core–Shell Structure for Treatment of Bladder Regeneration
Feng, C., Liu, C., Liu, S., Wang, Z., Yu, K., & Zeng, X. (2019) · Tissue Engineering Part A · doi:10.1089/ten.tea.2018.0255 · Cited by 24
Lee, C., Hsieh, M., Chang, S., Hung, K., Wang, C., Hsu, M., Juang, J., Hsieh, I.-C., Wen, M., & Liu, S. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s211898 · Cited by 22
Tong, H., & Wang, M. (2011) · Nano LIFE · doi:10.1142/s1793984411000384 · Cited by 20 · cited 2×
“Furthermore, there are even reports showing an increase in fiber diameter with increasing voltage [14,15].”
BackgroundA Novel Approach for Melt Electrospinning of Polymer Fibers
Morikawa, K., Green, M. J., & Naraghi, M. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.028 · Cited by 20 · cited 5×
“Bone tissue engineering scaffolds Single-needle solution ES + melt ES writing GEL—solution ES; PCL—melt ES writing AcOH - - Saos-2 cells [116] Bone tissue engineering scaffolds Modified free surface (bubble) ES PVA DW - Sodium dodecyl benzene sulfonates (surfactant) - [117] Bone tissue engineering scaffolds Single-nee…”
MethodInfluentialUhljar, L. É., Alshweiat, A., Katona, G., Chung, M., Radacsi, N., Kókai, D., Burián, K., & Ambrus, R. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14081559 · Cited by 20
Self-citationWrinkle-Free, Sandwich, Electrospun PLGA/SF Nanofibrous Scaffold for Skin Tissue Engineering
Zhu, C., Zhu, J., Wang, C., Chen, R., Sun, L., & Ru, C. (2018) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2018.2801569 · Cited by 18
Iglesias-Echevarria, M., Durante, L., Johnson, R., Rafuse, M., Ding, Y., Bonani, W., Maniglio, D., & Tan, W. (2019) · Biomaterials Science · doi:10.1039/c9bm00388f · Cited by 16
Electrospinning Nanofiber-Reinforced Aerogels for the Treatment of Bone Defects
Zhang, Y., Yin, C., Cheng, Y., Huang, X., Liu, K., Cheng, G., & Li, Z. (2019) · Advances in Wound Care · doi:10.1089/wound.2018.0879 · Cited by 16
Silk-ELR co-recombinamer covered stents obtained by electrospinning
Putzu, M., Causa, F., Parente, M., de Torre, I. G., Rodríguez‐Cabello, J. C., & Netti, P. A. (2018) · Regenerative Biomaterials · doi:10.1093/rb/rby022 · Cited by 15
Shrestha, K. R., Jeon, S. H., Jung, A. R., Kim, I. G., Kim, G. E., Park, Y. H., Kim, S. H., & Lee, J. Y. (2019) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-019-00187-x · Cited by 14
Functionalizing nanofibrous platforms for neural tissue engineering applications
Lategan, M., Kumar, P., & Choonara, Y. E. (2022) · Drug Discovery Today · doi:10.1016/j.drudis.2022.01.005 · Cited by 14
Antibacterial Ferroelectric Hybrid Membranes Fabricated via Electrospinning for Wound Healing
Lukiev, I. V., Antipina, L. S., Goreninskii, S., Tverdokhlebova, T. S., Vasilchenko, D. V., Nemoykina, A. L., Goncharova, D. A., Светличный, В. А., Dambaev, G. T., Bouznik, V. M., et al. (2021) · Membranes · doi:10.3390/membranes11120986 · Cited by 13
Electrospinning of cyanoacrylate tissue adhesives for human dural repair in endonasal surgery
Campbell, B., Anderson, Z., Han, D., Nebor, I., Forbes, J. A., & Steckl, A. J. (2021) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34944 · Cited by 12
Zhao, Z., Wu, T., Cui, Y., Zhao, R., Wan, Q., & Xu, R. (2022) · Polymers · doi:10.3390/polym14091882 · Cited by 12
Su, Y., Li, Z., Zhu, H., He, J., Wei, B., & Li, D. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100026 · Cited by 11
Mounesan, M., Akbari, S., & Brycki, B. E. (2021) · Journal of Industrial Textiles · doi:10.1177/15280837211048155 · Cited by 9
Fortin, W., Bouchet, M., Thérasse, É., Maire, M., Héon, H., Ajji, A., Soulez, G., & Lerouge, S. (2022) · Journal of Surgical Research · doi:10.1016/j.jss.2022.05.032 · Cited by 9
Bachımam, K., Emül, E., Sağlam, N., & KORKUSUZ, F. (2020) · TURKISH JOURNAL OF MEDICAL SCIENCES · doi:10.3906/sag-2001-123 · Cited by 8
Nazarkina, Z. K., Chelobanov, B. P., Кузнецов, К. А., Shutov, A. V., Romanova, I. V., Karpenko, A. A., & Laktionov, P. P. (2021) · Polymers · doi:10.3390/polym13071165 · Cited by 7
Chalony, C., Aguilar, L. E., Park, C. H., & Kim, C. S. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.129545 · Cited by 6
The Design and Implementation of a Disk Electrospinning Device
Hodgyai, N., Farmos, R. L., & GERGELY, A. L. (2020) · Műszaki Tudományos Közlemények · doi:10.33894/mtk-2020.13.11 · Cited by 1
Cited by
Nanofibers: A current era in drug delivery system
Hiwrale, A., Bharati, S., Pingale, P., & Rajput, A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18917 · Cited by 203
“The liquid’s viscosity get enhanced due to higher molecular weight and concentration [48,49].”
BackgroundKurowiak, J., Klekiel, T., & Będziński, R. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316952 · Cited by 164
Machine learning applications for electrospun nanofibers: a review
Subeshan, B., Atayo, A., & Asmatulu, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09994-7 · Cited by 140
“The high surface area inherent in this narrow fluid jet facilitates a quick loss of solvent, thereby accelerating the transformation of the fluid jet into a solidified fiber [7].”
Lian, S., Lamprou, D. A., & Zhao, M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123641 · Cited by 107
Recent Progress of Electrospun Nanofiber Dressing in the Promotion of Wound Healing
Lu, X., Zhou, L., & Song, W. (2024) · Polymers · doi:10.3390/polym16182596 · Cited by 102
“As the voltage increases, the hemispherical droplets at the needle mouth experience a growing electric field force, leading to the formation of a “Taylor cone” [34].”
Background
Metadata
- Authors
- Uhljar, L. É., & Ambrus, R.
- Affiliations
- University of Szeged (HU)
- Corresponding author
- Ambrus, Rita
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2023-01-26
- Volume
- 15
- Issue
- 2
- Pages
- 417
- ISSN
- 1999-4923 (ISSN-L)
- PMC
- PMC9965305
- OpenAlex
- W4318204417
- Semantic Scholar
- a0ee75c042054ec481325e17c8050b001a071ceb
- Cited by
- 108
- References
- 148
- Citations by year
- 2026: 26 · 2025: 41 · 2024: 23 · 2023: 18
- FWCI
- 1.89
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Pharmaceutics (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Human Capacities, Hungary (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Hungarian–Slovenian Bilateral project (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Gedeon Richter’s Talentum Foundation, Gedeon Richter Plc (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Keywords
- electrospinning, electrospun nanofibers, medical devices, wound dressings, tissue engineering scaffolds, face masks, nanofiber morphology, medical device regulation, nanotechnology regulation, drug delivery systems, soft electronics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.