The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Stability Issues on Perovskite Solar Cells
Open accessAbstract
Organo lead halide perovskite materials like methylammonium lead iodide (CH3NH3PbI3) and formamidinium lead iodide (HC(NH2)2PbI3) show superb opto-electronic properties. Based on these perovskite light absorbers, power conversion efficiencies of the perovskite solar cells employing hole transporting layers have increased from 9.7% to 20.1% within just three years. Thus, it is apparent that perovskite solar cell is a promising next generation photovoltaic technology. However, the unstable nature of perovskite was observed when exposing it to continuous illumination, moisture and high temperature, impeding the commercial development in the long run and thus becoming the main issue that needs to be solved urgently. Here, we discuss the factors affecting instability of perovskite and give some perspectives about further enhancement of stability of perovskite solar cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
An overview of semiconductor photocatalysis
Mills, A., & Le Hunte, S. (1997) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(97)00118-4 · Cited by 3,705
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAtomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Perovskite solar cells: an emerging photovoltaic technology
Park, N.-G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.07.007 · Cited by 2,097
Self-citationA Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Self-citationHabisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Two‐Inch‐Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization
Liu, Y., Yang, Z., Cui, D., Ren, X., Sun, J., Liu, X., Zhang, J., Wei, Q., Fan, H., Yu, F., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502597 · Cited by 1,123
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503153 · Cited by 969
High‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Lee, J., Seol, D., Cho, A., & Park, N. (2014) · Advanced Materials · doi:10.1002/adma.201401137 · Cited by 951
Self-citationKu, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
High performance hybrid solar cells sensitized by organolead halide perovskites
Cai, B., Xing, Y., Yang, Z., Zhang, W.-H., & Qiu, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40343b · Cited by 655
Control of the electronic phase of a manganite by mode-selective vibrational excitation
Rini, M., Tobey, R., Dean, N., Itatani, J., Tomioka, Y., Tokura, Y., Schoenlein, R. W., & Cavalleri, A. (2007) · Nature · doi:10.1038/nature06119 · Cited by 619
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Misra, R. K., Aharon, S., Li, B., Mogilyansky, D., Visoly-Fisher, I., Etgar, L., & Katz, E. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502642b · Cited by 552
Ultra-Low Thermal Conductivity in Organic–Inorganic Hybrid Perovskite CH3NH3PbI3
Pisoni, A., Jaćimović, J., Barišić, O. S., Spina, M., Gaál, R., Forró, L., & Horváth, E. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5012109 · Cited by 521
Kwon, Y. S., Lim, J., Yun, H.-J., Kim, Y.-H., & Park, T. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44174a · Cited by 403
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Malinauskas, T., Tomkute-Luksiene, D., Sens, R., Daskeviciene, M., Send, R., Wonneberger, H., Jankauskas, V., Bruder, I., & Getautis, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5090385 · Cited by 368
Yeo, J.-S., Kang, R., Lee, S., Jeon, Y.-J., Myoung, N., Lee, C.-L., Kim, D.-Y., Yun, J.-M., Seo, Y.-H., Kim, S.-S., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.022 · Cited by 358
Dong, X., Fang, X., Lv, M., Lin, B., Zhang, S., Ding, J., & Yuan, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06128d · Cited by 341
Zheng, L., Chung, Y.-H., Ma, Y., Zhang, L., Xiao, L., Chen, Z., Wang, S., Qu, B., & Gong, Q. (2014) · Chem. Commun. · doi:10.1039/c4cc04680c · Cited by 275
Hou, F., Su, Z., Jin, F., Yan, X., Wang, L., Zhao, H., Zhu, J., Chu, B., & Li, W. (2015) · Nanoscale · doi:10.1039/c5nr01864a · Cited by 247
Wei, Z., Zheng, X., Chen, H., Long, X., Wang, Z., & Yang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03802b · Cited by 87
Water-repellent perovskite solar cell
Kang, S. M., Ahn, N., Lee, J., Choi, M., & Park, N. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05413j · Cited by 75
Self-citation
Cited by
Domanski, K., Roose, B., Matsui, T., Saliba, M., Turren-Cruz, S.-H., Correa-Baena, J.-P., Carmona, C. R., Richardson, G., Foster, J. M., De Angelis, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03352k · Cited by 717
CsPbBr3 QD/AlOx Inorganic Nanocomposites with Exceptional Stability in Water, Light, and Heat
Loiudice, A., Saris, S., Oveisi, E., Alexander, D. T. L., & Buonsanti, R. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703703 · Cited by 482
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Intrinsic Instability of Inorganic–Organic Hybrid Halide Perovskite Materials
Park, B., & Seok, S. I. (2019) · Advanced Materials · doi:10.1002/adma.201805337 · Cited by 454
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Metadata
- Authors
- Zhao, X., & Park, N.-G.
- Venue
- Photonics
- Publisher
- MDPI AG
- Published
- 2015-11-27
- Volume
- 2
- Issue
- 4
- Pages
- 1139-1151
- ISSN
- 2304-6732 (ISSN-L)
- OpenAlex
- W2175416605
- Cited by
- 262
- References
- 44
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.