The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Open accessAbstract
As biodegradable thermoplastics are more and more penetrating the market of filaments for fused deposition modeling (FDM) 3D printing, fillers in the form of natural fibers are convenient: They have the clear advantage of reducing cost, yet retaining the filament biodegradability characteristics. In plastics that are processed through standard techniques (e.g., extrusion or injection molding), natural fibers have a mild reinforcing function, improving stiffness and strength, it is thus interesting to evaluate whether the same holds true also in the case of FDM produced components. The results analyzed in this review show that the mechanical properties of the most common materials, i.e., acrylonitrile-butadiene-styrene (ABS) and PLA, do not benefit from biofillers, while other less widely used polymers, such as the polyolefins, are found to become more performant. Much research has been devoted to studying the effect of additive formulation and processing parameters on the mechanical properties of biofilled 3D printed specimens. The results look promising due to the relevant number of articles published in this field in the last few years. This notwithstanding, not all aspects have been explored and more could potentially be obtained through modifications of the usual FDM techniques and the devices that have been used so far.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
Influence of various chemical treatments on the composition and structure of hemp fibres
Troëdec, M. L., Sedan, D., Peyratout, C. S., Bonnet, J. P., Smith, A., Guinebretière, R., Gloaguen, V., & Krausz, P. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.001 · Cited by 631
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Effect of wood content in FDM filament on properties of 3D printed parts
Kariz, M., Sernek, M., Obućina, M., & Kuzman, M. K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.016 · Cited by 360
Ayrilmis, N., Kariz, M., Kwon, J. H., & Kitek Kuzman, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03299-9 · Cited by 274
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., & Wolcott, M. P. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.10.004 · Cited by 263
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228
Production and 3D printing processing of bio-based thermoplastic filament
Gkartzou, E., Koumoulos, E. P., & Charitidis, C. A. (2017) · Manufacturing Review · doi:10.1051/mfreview/2016020 · Cited by 222
3D-Printed Wood: Programming Hygroscopic Material Transformations
Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0022 · Cited by 202
A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Nguyen, N. A., Bowland, C. C., & Naskar, A. K. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.03.009 · Cited by 195
Cork–PLA composite filaments for fused deposition modelling
Daver, F., Lee, K. P. M., Brandt, M., & Shanks, R. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.008 · Cited by 190
Liu, H., He, H., Peng, X., Huang, B., & Li, J. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4524 · Cited by 180
Ayrılmış, N. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.09.009 · Cited by 179
Bledzki, A. K., & Faruk, O. (2003) · Applied Composite Materials · doi:10.1023/a:1025741100628 · Cited by 176
Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173
Mazzanti, V., Pariante, R., Bonanno, A., Ruiz de Ballesteros, O., Mollica, F., & Filippone, G. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.05.015 · Cited by 167
Self-citationAbout the Use of Recycled or Biodegradable Filaments for Sustainability of 3D Printing
Pakkanen, J., Manfredi, D., Minetola, P., & Iuliano, L. (2017) · Smart innovation, systems and technologies · doi:10.1007/978-3-319-57078-5_73 · Cited by 166
Kuo, C.-C., Liu, L.-C., Teng, W.-F., Chang, H.-Y., Chien, F.-M., Liao, S.-J., Kuo, W.-F., & Chen, C.-M. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.10.005 · Cited by 159
Hinchcliffe, S. A., Hess, K. M., & Srubar, W. V. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.089 · Cited by 145
Wood based bulk material in 3D printing processes for applications in construction
Henke, K., & Treml, S. (2012) · European Journal of Wood and Wood Products · doi:10.1007/s00107-012-0658-z · Cited by 137
Santoni, A., Bonfiglio, P., Fausti, P., Marescotti, C., Mazzanti, V., Mollica, F., & Pompoli, F. (2019) · Applied Acoustics · doi:10.1016/j.apacoust.2019.02.022 · Cited by 134
Self-citationVaidya, A., Collet, C., Gaugler, M., & Lloyd-Jones, G. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.02.008 · Cited by 131
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02351 · Cited by 126
Tarrés, Q., Melbø, J. K., Delgado‐Aguilar, M., Espinach, F. X., Mutjé, P., & Chinga‐Carrasco, G. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.009 · Cited by 126
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Tran, T. N., Bayer, I. S., Heredia‐Guerrero, J. A., Frugone, M., Lagomarsino, M., Maggio, F., & Athanassiou, A. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700219 · Cited by 120
Guo, R., Ren, Z., Bi, H., Song, Y., & Xu, M. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.07.035 · Cited by 101
van den Oever, M. J. A., Beck, B., & Müssig, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.011 · Cited by 96
Huber, T., & Müssig, J. (2008) · Composite Interfaces · doi:10.1163/156855408783810948 · Cited by 85
3D Printable Filaments Made of Biobased Polyethylene Biocomposites
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2018) · Polymers · doi:10.3390/polym10030314 · Cited by 77
Structural changes during 3D printing of bioderived and synthetic thermoplastic materials
Pop, M. A., Croitoru, C., Bedő, T., Geamăn, V., Radomir, I., Mihaela Cos, N., Zaharia, S. M., Chicoș, L. A., & Milos, A. I. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47382 · Cited by 77
Analysis and experimental evaluation of twin screw extruders
Rauwendaal, C. (1981) · Polymer Engineering and Science · doi:10.1002/pen.760211608 · Cited by 76
Bouafif, H., Koubaa, A., Perré, P., Cloutier, A., & Riedl, B. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30129 · Cited by 75
Girdis, J., Gaudion, L., Proust, G., Löschke, S. K., & Dong, A. (2016) · JOM · doi:10.1007/s11837-016-2213-6 · Cited by 71
Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing
Zhao, D. X., Cai, X., Shou, G., et al. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.667.250 · Cited by 58
Combined effect of water uptake and temperature on wood polymer composites
Fortini, A., & Mazzanti, V. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46674 · Cited by 40
Self-citationD’Amora, U., D’Este, M., Eglin, D., Safari, F., Sprecher, C. M., Gloria, A., Santis, R. D., Alini, M., & Ambrosio, L. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2457 · Cited by 39
Mechanical Properties of 3D-Printed Wood-Plastic Composites
Martikka, O., Kärki, T., & Wu, Q. L. (2018) · Key engineering materials · doi:10.4028/www.scientific.net/kem.777.499 · Cited by 36
Zhang, Q., Cai, H., Zhang, A., Lin, X., Yi, W., & Zhang, J. (2018) · Polymers · doi:10.3390/polym10090932 · Cited by 32
Wimmer, R., Steyrer, B., Woess, J., Koddenberg, T., & Mundigler, N. (2015) · doi:10.13140/rg.2.1.2483.6563 · Cited by 30
Mazzanti, V., & Mollica, F. (2017) · Polymer Composites · doi:10.1002/pc.24559 · Cited by 27
Self-citation
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Prediction of Polymer Properties
Bicerano, J. (2002) · CRC Press eBooks · doi:10.1201/9780203910115 · Cited by 846
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Metadata
- Authors
- Mazzanti, V., Malagutti, L., & Mollica, F.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-06-28
- Volume
- 11
- Issue
- 7
- Pages
- 1094
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2956108599
- Cited by
- 666
- References
- 51
- FWCI
- 28.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.