Morphology, Crystallinity, and Molecular Weight of Poly(ε-caprolactone)/Graphene Oxide Hybrids
Open accessThe DOI matches its Crossref record; 57 of the 58 references it cites were found in a registry or an index.
Abstract
A study was carried out to determine the effects of graphene oxide (GO) filler on the properties of poly(ε-caprolactone) (PCL) films. A series of nanocomposites were prepared, incorporating different graphene oxide filler contents (0.1, 0.2, and 0.5 wt%) by the solution mixing method, and an in-depth study was made of the morphological changes, crystallization, infrared absorbance, molecular weight, thermal properties, and biocompatibility as a function of GO content to determine their suitability for use in biomedical applications. The infrared absorbance showed the existence of intermolecular hydrogen bonds between the PCL’s carbonyl groups and the GO’s hydrogen-donating groups, which is in line with the apparent reduction in molecular weight at higher GO contents, indicated by the results of the gel permeation chromatography (GPC), and the thermal property analysis. Polarized optical microscopy (POM) showed that GO acts as a nucleating point for PCL crystals, increasing crystallinity and crystallization temperature. The biological properties of the composites studied indicate that adding only 0.1 wt% of GO can improve cellular viability and that the composite shows promise for use in biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Additionally, Thurn-Albrecht et al. demonstrated that PCL behaves as a crystal fixed polymer; when crystallized from the melt, it cannot exceed a crystallinity of ~60 %. 63,64”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [64]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“Due to its rheological properties, almost any polymer processing method can be used to produce a variety of biomaterial applications, such as drug-delivery systems, sutures, wound dressings, fixation devices, and for dentistry and tissue engineering in the form of muscle, bone, cartilage, tendon, blood, nerve, skin, a…”
BackgroundRecent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,406 · cited 2×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundGraphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123 · cited 1×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundSynthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets
Stankovich, S., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.004 · Cited by 2,224
Liang, J., Huang, Y., Zhang, L., Wang, Y., Ma, Y., Guo, T., & Chen, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801776 · Cited by 1,605
Graphene/Polyurethane Nanocomposites for Improved Gas Barrier and Electrical Conductivity
Kim, H., Miura, Y., & Macosko, C. W. (2010) · Chemistry of Materials · doi:10.1021/cm100477v · Cited by 1,399 · cited 1×
“The different processes are known to produce different nanofiller dispersion levels in the matrix and affect the polymer composite properties in different ways [17,18].”
BackgroundCytotoxicity of Graphene Oxide and Graphene in Human Erythrocytes and Skin Fibroblasts
Liao, K.-H., Lin, Y.-S., Macosko, C. W., & Haynes, C. L. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200428v · Cited by 1,370 · cited 2×
“Som studies have found that the GO toxic effect on cells depends o the do used, and that lower GO concent ation affect cell behavior po itively [23,61], phenomena which wer also found n the presen study.”
BackgroundThe effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169 · cited 1×
“Different methods have recently been proposed to process GO, including in situ polymerization, melt blending, and solution mixing, to disperse graphenes in polymer matrices [16].”
Method
Research works printed but not linked: 3
- Brodie, 1860, Sur le poids atomique du graphite, Ann. Chim. Phys., 59, e472
- Donlan, R.M., Wu, P., Grainger, D.W., and Ratner, B.D. (2004). An introduction to materials in medicine, Elsevier Academic Press.
- Klug, H.P., and Alexander, L.E. (1974). X-Ray Diffraction Procedures: For Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc.. [2nd ed.].
Cited by
Ansari, M. A. A., Golebiowska, A. A., Dash, M., Kumar, P., Jain, P. K., Nukavarapu, S. P., Ramakrishna, S., & Nanda, H. S. (2022) · Biomaterials Science · doi:10.1039/d2bm00035k · Cited by 136
Bozkaya, O., Arat, E., Gün Gök, Z., Yiğitoğlu, M., & Vargel, İ. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111023 · Cited by 85
Raza, M. A., Sharma, M. K., Nagori, K., Jain, P., Ghosh, V., Gupta, U. D., & Ajazuddin, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124734 · Cited by 77
Tayouri, M. I., Estaji, S., Mousavi, S. R., Khasraghi, S. S., Jahanmardi, R., Nouranian, S., Arjmand, M., & Khonakdar, H. A. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110179 · Cited by 66
Mulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Metadata
- Authors
- Castilla-Cortázar, I., Vidaurre, A., Marí, B., & Campillo-Fernández, A. J.
- Affiliations
- Centro de Biomateriales e Ingeniería Tisular (ES)
- Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (ES)
- Departamento de Física Aplicada-IDF, Universitat Politècnica de València, 46022 Valencia, Spain
- Corresponding author
- Campillo-Fernández, Alberto J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-06-28
- Volume
- 11
- Issue
- 7
- Pages
- 1099
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6680561
- OpenAlex
- W2955563675
- Cited by
- 86
- References
- 58
- Citations by year
- 2026: 8 · 2025: 14 · 2024: 17 · 2023: 13 · 2022: 20 · 2021: 8 · 2020: 4 · 2019: 2
- FWCI
- 2.41
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Generalitat Valenciana (GV/2016/067)
- Ministerio de Economía y Competitividad (MAT2016-76039-C4-3-R)
- Centro de Investigación Biomédica en Red en Bioingeniería, Biomateriales y Nanomedicina (C8041228)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- polycaprolactone, graphene oxide, polymer nanocomposites, crystallinity, molecular weight reduction, hydrogen bonding, nucleation, thermal properties, biocompatibility, cell viability, biomedical materials, polymer films
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Morphology, Crystallinity, and Molecular Weight of Poly(ε-caprolactone)/Graphene Oxide Hybrids. https://app.cochat.ai/papers/10.3390/polym11071099
- The paper
- Castilla-Cortázar, I., Vidaurre, A., Marí, B., & Campillo-Fernández, A. J. (2019). Morphology, Crystallinity, and Molecular Weight of Poly(ε-caprolactone)/Graphene Oxide Hybrids. Polymers. https://doi.org/10.3390/polym11071099
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.