Morphology, Crystallinity, and Molecular Weight of Poly(ε-caprolactone)/Graphene Oxide Hybrids
Open accessThe DOI matches its Crossref record; 57 of the 58 references it cites were found in a registry or an index.
Abstract
A study was carried out to determine the effects of graphene oxide (GO) filler on the properties of poly(ε-caprolactone) (PCL) films. A series of nanocomposites were prepared, incorporating different graphene oxide filler contents (0.1, 0.2, and 0.5 wt%) by the solution mixing method, and an in-depth study was made of the morphological changes, crystallization, infrared absorbance, molecular weight, thermal properties, and biocompatibility as a function of GO content to determine their suitability for use in biomedical applications. The infrared absorbance showed the existence of intermolecular hydrogen bonds between the PCL’s carbonyl groups and the GO’s hydrogen-donating groups, which is in line with the apparent reduction in molecular weight at higher GO contents, indicated by the results of the gel permeation chromatography (GPC), and the thermal property analysis. Polarized optical microscopy (POM) showed that GO acts as a nucleating point for PCL crystals, increasing crystallinity and crystallization temperature. The biological properties of the composites studied indicate that adding only 0.1 wt% of GO can improve cellular viability and that the composite shows promise for use in biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Additionally, Thurn-Albrecht et al. demonstrated that PCL behaves as a crystal fixed polymer; when crystallized from the melt, it cannot exceed a crystallinity of ~60 %. 63,64”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [64]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“Due to its rheological properties, almost any polymer processing method can be used to produce a variety of biomaterial applications, such as drug-delivery systems, sutures, wound dressings, fixation devices, and for dentistry and tissue engineering in the form of muscle, bone, cartilage, tendon, blood, nerve, skin, a…”
BackgroundRecent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,406 · cited 2×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundGraphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123 · cited 1×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundSynthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets
Stankovich, S., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.004 · Cited by 2,224
Liang, J., Huang, Y., Zhang, L., Wang, Y., Ma, Y., Guo, T., & Chen, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801776 · Cited by 1,605
Graphene/Polyurethane Nanocomposites for Improved Gas Barrier and Electrical Conductivity
Kim, H., Miura, Y., & Macosko, C. W. (2010) · Chemistry of Materials · doi:10.1021/cm100477v · Cited by 1,399 · cited 1×
“The different processes are known to produce different nanofiller dispersion levels in the matrix and affect the polymer composite properties in different ways [17,18].”
BackgroundCytotoxicity of Graphene Oxide and Graphene in Human Erythrocytes and Skin Fibroblasts
Liao, K.-H., Lin, Y.-S., Macosko, C. W., & Haynes, C. L. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200428v · Cited by 1,370 · cited 2×
“Som studies have found that the GO toxic effect on cells depends o the do used, and that lower GO concent ation affect cell behavior po itively [23,61], phenomena which wer also found n the presen study.”
BackgroundThe effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169 · cited 1×
“Different methods have recently been proposed to process GO, including in situ polymerization, melt blending, and solution mixing, to disperse graphenes in polymer matrices [16].”
Method
Research works printed but not linked: 3
- Brodie, 1860, Sur le poids atomique du graphite, Ann. Chim. Phys., 59, e472
- Donlan, R.M., Wu, P., Grainger, D.W., and Ratner, B.D. (2004). An introduction to materials in medicine, Elsevier Academic Press.
- Klug, H.P., and Alexander, L.E. (1974). X-Ray Diffraction Procedures: For Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc.. [2nd ed.].
Cited by
Ansari, M. A. A., Golebiowska, A. A., Dash, M., Kumar, P., Jain, P. K., Nukavarapu, S. P., Ramakrishna, S., & Nanda, H. S. (2022) · Biomaterials Science · doi:10.1039/d2bm00035k · Cited by 144
Bozkaya, O., Arat, E., Gün Gök, Z., Yiğitoğlu, M., & Vargel, İ. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111023 · Cited by 85
Raza, M. A., Sharma, M. K., Nagori, K., Jain, P., Ghosh, V., Gupta, U. D., & Ajazuddin, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124734 · Cited by 77
Tayouri, M. I., Estaji, S., Mousavi, S. R., Khasraghi, S. S., Jahanmardi, R., Nouranian, S., Arjmand, M., & Khonakdar, H. A. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110179 · Cited by 66
Mulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Rostami, M., Khaniki, G. J., Molaee-Aghaee, E., Shariatifar, N., Sani, M. A., Azami, M., Rezvantalab, S., Ramezani, S., & Ghorbani, M. (2024) · Scientific Reports · doi:10.1038/s41598-024-54969-y · Cited by 49
Poly (α-caprolactone) (PCL) biopolymeric bionanoarchitectures for tissue engineering applications
Idumah, C. I. (2024) · International Journal of Polymeric Materials · doi:10.1080/00914037.2024.2372795 · Cited by 41
Joy, A., Unnikrishnan, G., Megha, M., Haris, M., Thomas, J. P., Kolanthai, E., & Senthilkumar, M. (2022) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-021-02180-1 · Cited by 37
Loyo, C., Córdoba, A., Palza, H., Canales, D. A., Melo, F., Vivanco, J. F., Baier, R. V., Millán, C., Corrales, T., & Zapata, P. A. (2023) · Polymers · doi:10.3390/polym16010129 · Cited by 37
Ramaraju, H., Landry, A. M., Shashidharan, S., Shetty, A. M., Crotts, S. J., Maher, K., Goudy, S. L., & Hollister, S. J. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121702 · Cited by 35
Yang, J. Y., Wang, H., Lou, L., & Meng, Z. (2025) · Nanomaterials · doi:10.3390/nano15161274 · Cited by 32
Application of Biopolymers as Sustainable Cladding Materials: A Review
Nazrun, T., Hassan, M. K., Hossain, M. D., Ahmed, B., Hasnat, M. R., & Saha, S. (2023) · Sustainability · doi:10.3390/su16010027 · Cited by 31
Lyn, F. H., & Hanani, Z. A. N. (2022) · Journal of Nanoparticle Research · doi:10.1007/s11051-022-05558-5 · Cited by 28
“The incorporation of GO has been reported to promote the crystallization behaviours of the resulting composites with several polymers such as poly(ε-caprolactone) [114],”
BackgroundAvella, A., Mincheva, R., Raquez, J., & Re, G. L. (2021) · Polymers · doi:10.3390/polym13040491 · Cited by 26
Mokoena, L. S., & Mofokeng, J. P. (2023) · Materials · doi:10.3390/ma16062527 · Cited by 26
Negaresh, M., Javadi, A., & Garmabi, H. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1377340 · Cited by 26
“However, NCC nanoparticles might interfere with the chain extension process, potentially resulting in their scission during mixing (Castilla-Cortázar et al., 2019).”
Ebrahimifar, M., & Taherimehr, M. (2021) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2021.102491 · Cited by 25
Patil, T. V., Dutta, S. D., Patel, D. K., Ganguly, K., & Lim, K. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.155949 · Cited by 24
Pranav, U., Malhotra, M., Pathan, S., & Jayakannan, M. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01201 · Cited by 24
Hybrid gold/graphene oxide reinforced polycaprolactone nanocomposite for biomedical applications
Joy, A., Unnikrishnan, G., Megha, M., Haris, M., Thomas, J. P., Kolanthai, E., & Senthilkumar, M. (2023) · Surfaces and Interfaces · doi:10.1016/j.surfin.2023.103000 · Cited by 24
Singh, W. I., Sarakar, G., & Swain, B. P. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03920-6 · Cited by 22
Biomimetic Growth of Hydroxyapatite in Hybrid Polycaprolactone/Graphene Oxide Ultra-Porous Scaffolds
Fuster-Gómez, S., Cortázar, I. C., Vidaurre, A., & Campillo-Fernández, A. J. (2023) · ACS Omega · doi:10.1021/acsomega.2c07656 · Cited by 20
Self-citationChen, J., Sun, S., Macios, M. M., Oguntade, E., Narkar, A. R., Mather, P. T., & Henderson, J. H. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13584 · Cited by 22
Liu, Y., Yang, J., Bai, L., Qu, D., Liu, Z., Wang, Z., Wiesner, M. R., & Liang, H. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.126847 · Cited by 20
Ujčić, A., Sobótka, M., Šlouf, M., Różański, A., & Szustakiewicz, K. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107906 · Cited by 17
Hou, Y., Wang, W., & Bártolo, P. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00280-8 · Cited by 19
Yusrizal, A. A., Abdullah, T. K., Ali, E. S., Ahmad, S., & Zubir, S. A. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2022.103860 · Cited by 17
PCL-ZnO/TiO2/HAp Electrospun Composite Fibers with Applications in Tissue Engineering
Jinga, S., Zamfirescu, A.-I., Voicu, G., Enculescu, M., Evanghelidis, A., & Busuioc, C. (2019) · Polymers · doi:10.3390/polym11111793 · Cited by 17
Avella, A., Idström, A., Mincheva, R., Nakayama, K., Evenäs, L., Raquez, J.-M., & Lo Re, G. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107166 · Cited by 15
Dagdag, O., & Kim, H. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.02.052 · Cited by 14
Nagarajan, S., & Woo, E. M. (2021) · CrystEngComm · doi:10.1039/d1ce00507c · Cited by 14
Alazab, M. H., Abouelgeit, S. A., & Aboushelib, M. N. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e15844 · Cited by 14
Jordá-Reolid, M., Montava-Jordà, S., Balart, R., Lascano, D., Muñoz, N. M., & Quiles‐Carrillo, L. (2019) · Polymers · doi:10.3390/polym11081331 · Cited by 14
Polycaprolactone Films Modified by L-Arginine for Mesenchymal Stem Cell Cultivation
Nashchekina, Y. A., Chabina, A. S., Нащекин, А. В., & Mikhailova, N. (2020) · Polymers · doi:10.3390/polym12051042 · Cited by 14
Pekdemir, M. E. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0368-4 · Cited by 14
Ravi, J., Ponnuraj, K., & Ragunathan, P. T. (2025) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2025.179066 · Cited by 13
Hüner, K. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26233 · Cited by 13
Stimuli-responsive Graphene-polysaccharide Nanocomposites for Drug Delivery and Tissue Engineering
Teymourlouei, A. S., Naghib, S. M., & Mozafari, M. R. (2024) · Current Organic Synthesis · doi:10.2174/0115701794298435240324175513 · Cited by 12
Rahman, S. S., Arshad, M., Zubair, M., Ghasri-Khouzani, M., Qureshi, A. J., & Ullah, A. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101633 · Cited by 12
Kumar, K., Dave, R. P., Dev, S., & Singh, M. (2022) · RSC Advances · doi:10.1039/d2ra04230d · Cited by 12
“22,23 The M v vs. photons studies that vary the GO molar concentration were attained and focus on photons per mole of GO at various pH and temperature.”
Nilawar, S., Yadav, P., Jain, N., Saini, D. K., & Chatterjee, K. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00184 · Cited by 11
Crystallization of Polycaprolactone within Nanopapers Based on Graphene-Related Materials
Zhao, H., Pérez‐Camargo, R. A., Damonte, G., Armandi, M., Monticelli, O., Liu, G., Müller, A. J., & Fina, A. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00752 · Cited by 11
Villarreal-Gómez, L. J., Iglesias, A. L., Soto, V. M., Olivas, A., Castro, R. V., López‐Maldonado, E. A., Oropeza-Guzmán, M. T., Soto, C. A. R., Medina, E. G. L., & Arce, J. L. V. (2023) · RSC Advances · doi:10.1039/d3ra07283e · Cited by 11
Loyo, C., Palza, H., Saavedra, M., Canales, D. A., García‐Herrera, C., Olate‐Moya, F., Melo, F., Córdova, L. A., Solano, L., & Zapata, P. A. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109057 · Cited by 11
Dalfino, S., Olăreț, E., Piazzoni, M., Savadori, P., Stancu, I., Tartaglia, G. M., Dolci, C., & Moroni, L. (2024) · Tissue Engineering Part A · doi:10.1089/ten.tea.2024.0030 · Cited by 10
Aremu, O. S., Katata‐Seru, L., Mkhize, Z., Botha, T. L., & Wepener, V. (2020) · Scientific Reports · doi:10.1038/s41598-020-68666-z · Cited by 10
Parhi, B., Bharatiya, D., & Swain, S. K. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52116 · Cited by 10
Rodríguez-Soto, M. A., Garcia-Brand, A. J., Riveros, A., Suarez, N. A., Serrano, F., Osma, J. F., Muñoz-Camargo, C., Cruz, J. C., Sandoval, N. F., & Briceño, J. C. (2022) · Polymers · doi:10.3390/polym14112135 · Cited by 11
“The broadening of characteristic peaks of PCL were analyzed to identify backbone structural changes, and hidden peaks in the carbonyl region (1760—1694 cm−1) were resolved based on three Gaussian-shaped absorption bands to identify changes in H-bonds between adjacent chains and amorphous and crystalline phases [31].”
BackgroundMethodInfluentialHüner, K., Sarac, B., Yüce, E., Rezvan, A., Mičušík, M., Omastová, M., Eckert, J., & Saraç, A. S. (2022) · Molecular Systems Design & Engineering · doi:10.1039/d2me00181k · Cited by 9
Gamma Irradiation Processing on 3D PCL Devices—A Preliminary Biocompatibility Assessment
Guedes, F., Branquinho, M., Biscaia, S., Alvites, R., Sousa, A. C., Lopes, B., Sousa, P., Rêma, A., Amorim, I., Faria, F., et al. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232415916 · Cited by 9
“1 using differential scanning calorimetry analysis [21].”
John, F. A., Thomas, P., Jacob, G. C., & Jose, A. J. (2023) · Composite Interfaces · doi:10.1080/09276440.2023.2232979 · Cited by 9
“This indicates that the interaction between the polymer matrix and the nanofiller is probably between the oxygen-containing groups of GO and the fluorine atoms of PVDF (Figure 11) [38].”
BackgroundMaro, M. D., Pedraza, R., Balma, A. M., d’Ayala, G. G., Poggetto, G. D., Malucelli, G., Roato, I., Duraccio, D., Mussano, F. D., & Faga, M. G. (2024) · Journal of Composites Science · doi:10.3390/jcs8060194 · Cited by 8
“However, as also found for other fillers, the crystallinity remains almost constant as the amount of ATZ increases [27].”
Negaresh, M., Karbalaei‐Bagher, M., Jahani, Y., & Forouzan, A. (2023) · SPE Polymers · doi:10.1002/pls2.10115 · Cited by 7
Ramaraju, H., Pithadia, K. J., Crotts, S. J., Flanagan, C. L., Green, G. E., & Hollister, S. J. (2021) · Annals of Biomedical Engineering · doi:10.1007/s10439-021-02835-7 · Cited by 7
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Synthesis of Graphene-based Polymer Nanocomposites and comparison of properties
Gireesh, T. K. D., Anzila, V. I., Litha, T. T., & Nair, P. P. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1248/1/012012 · Cited by 6
Mambiri, L. T., & Depan, D. (2025) · C – Journal of Carbon Research · doi:10.3390/c11010005 · Cited by 6
Structural and Thermal Properties of Polycaprolactone/PEG-Coated Zinc Oxide Nanocomposites
Sened, N., Djahnit, L., El-Miloudi, K., & López-Manchado, M. Á. (2021) · Polymer Science Series A · doi:10.1134/s0965545x21060110 · Cited by 6
Negaresh, M., Javadi, A., & Garmabi, H. (2024) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057241243363 · Cited by 5
“63 This could be due to collision of the nano-particles and chains.”
Shah, S. (2020) · Pakistan Journal of Analytical & Environmental Chemistry · doi:10.21743/pjaec/2020.06.06 · Cited by 5
Innovative electrospun PCL/fibroin/l-dopa scaffolds scaffolds supporting bone tissue regeneration
Marin, E., Yoshikawa, O., Boschetto, F., Honma, T., Adachi, T., Zhu, W., Xu, H., Kanamura, N., Yamamoto, T., & Pezzotti, G. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac6c68 · Cited by 5
Effect of functional groups on the reinforcement of graphene oxide/resin nanocomposites
Wang, F., Liu, Y., Zhang, Y., Jiang, J., & Chen, J. (2025) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2025.143260 · Cited by 4
Conte, A. A., Hu, X., & Beachley, V. Z. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200475 · Cited by 4
Müller, V., Caldas, B. S., Radovanovic, E., & Muniz, E. C. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106464 · Cited by 4
Comparison of Different Aliphatic Polyester-Based Microparticles as Protein Delivery Systems
Korzhikov-Vlakh, V. A., Sinitsyna, E., Stepanova, M., Korzhikova‐Vlakh, E., & Tennikova, T. B. (2025) · Polymers · doi:10.3390/polym17192676 · Cited by 4
Cesario, L. V., Filho, E. A. D. S., Pinto, G. M., Cardoso, K. L. F., Braga, N. F., Fechine, G. J. M., & de Carvalho, L. H. (2024) · Polymer Composites · doi:10.1002/pc.28989 · Cited by 3
Hüner, K. (2025) · Chemical Papers · doi:10.1007/s11696-025-03962-4 · Cited by 3
Reyhanoglu, M. B., Sulutas, R. B., Adali, B., Kaya, E., Tinaz, G. B., Evran, S., GÜNDÜZ, O., & Cesur, S. (2026) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2026.115054 · Cited by 3
Litha, T. T., & Nair, P. P. (2025) · Asian Journal of Chemistry · doi:10.14233/ajchem.2025.33065 · Cited by 3
Grobelny, Z., Jurek-Suliga, J., & Golba, S. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04355-3 · Cited by 4
“Two separated carbonyl bands were prescribed to amorphous (1735 cm−1) and crystalline regions (1725 cm−1) [96].”
BackgroundAlus, L. N., Anitasari, S., Kosala, K., Ismail, S., & Yani, S. (2025) · Padjadjaran Journal of Dental Researchers and Students · doi:10.24198/pjdrs.v9i2.63110 · Cited by 1
Medina-Moreno, A., Lázaro, M., Fernández-Álvarez, F., Iglesias, G. R., & Arias, J. L. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115657 · Cited by 1
Negaresh, M., Javadi, A., & Garmabi, H. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-04098-x · Cited by 1
“In a previous paper, incorporating more than 3 wt.% of GMA into PLA/PCL blends resulted in a decrease in flexural modulus, elongation at break, and impact strength [44].”
Yekrang, J., & Yousefi, A. (2023) · International Journal of Polymeric Materials · doi:10.1080/00914037.2023.2292659 · Cited by 2
“C ¼ O ester groups of PCL [59–61] .”
Duvarcı, F. N., Çelik, M. C., Yüce, M. C., & Eskitoros‐Togay, Ş. M. (2025) · Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.47495/okufbed.1527977
Role of Polymers for Skin Disorders
Govindaswamy, B., & Kirti, P. S. (2025) · Springer tracts in additive manufacturing · doi:10.1007/978-3-031-90807-1_9
Ceylan, S. A., Baltacıoğlu, M. F., Bal, B., Bayram, F. C., & İşoğlu, İ. A. (2025) · Materials Research Express · doi:10.1088/2053-1591/adf490
Kasamatsu, M., Ishioka, S., Isobe, N., Kimoto, K., Okada, S., Goi, Y., Fujisawa, S., & Saito, T. (2025) · Nanoscale Horizons · doi:10.1039/d5nh00271k
Hussein, L., Moaness, M., Mabrouk, M., Farahat, M. G., & Beherei, H. H. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107806
Gryka, M. C. (2020) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign)
Mambiri, L. T., Broussard, G., & Zaman, T. (2023) · Nanofabrication · doi:10.37819/nanofab.8.1793
John, A. P., Santoro, S., Curcio, E., Argurio, P., Chidichimo, F., Straface, S., Ruffolo, S. A., & Russa, M. F. L. (2025) · Polymers · doi:10.3390/polym18010060
A low-cost fabrication method for PCL-GO microfibers
Lumpapiwat, J., Marinier, P., & Ratanavis, A. (2026) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ae5f28
“The melting points of PCL and the PCL-GO mixtures are consistent with the results obtained by Castilla-Cortázar et al [37].”
Emadi, S., Ebrahimian-Hosseinabadi, M., & Kharazi, A. Z. (2026) · Journal of Bionic Engineering · doi:10.1007/s42235-026-00903-z
“Incorporation of Salvia and GO reduced PCL peak intensi - ties, indicating partial disruption of the crystalline domains, which may improve biodegradability and flexibility while maintaining structural integrity [25].”
InfluentialBose, N., Gokulkumar, K., Chen, S.-H., Mahaan, R., Suresh, D. F., Varatharajan, P., Munuswamy‐Ramanujam, G., & Lee, K.-M. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c06324
Monoflament ve fibrilleşmiş fiber dolgulu polikaprolakton kompozit filmler ve özellikleri
Göktaş, M., & Mindivan, F. (2026) · Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.17714/gumusfenbil.1780647
Development of PLA-PCL Based Bio-Nanocomposite Implant Material Enhanced with Hydroxyapatite
Litha, T. T., & Nair, P. P. (2026) · Springer Proceedings in Materials · doi:10.1007/978-981-95-9865-6_3
Jayan, M., Kumar, J. V., Sathyalakshmi, R., Muthuswamy, S., Carlin, R. J., Raj, A. D., JohnSundaram, S., Veeramani, S., Devanesan, S., & Wadaan, M. A. (2026) · Polymers for Advanced Technologies · doi:10.1002/pat.70727
“You can confirm PCL itself is present by looking for diffraction peaks at 21.50° and 23.88° [20].”
InfluentialMomen, L. T., Asadi, A., Abdolmaleki, A., Zahri, S., & Bhattacharya, D. (2026) · Advanced Pharmaceutical Bulletin · doi:10.34172/apb.47407
Metadata
- Authors
- Castilla-Cortázar, I., Vidaurre, A., Marí, B., & Campillo-Fernández, A. J.
- Affiliations
- Centro de Biomateriales e Ingeniería Tisular (ES)
- Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (ES)
- Departamento de Física Aplicada-IDF, Universitat Politècnica de València, 46022 Valencia, Spain
- Corresponding author
- Campillo-Fernández, Alberto J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-06-28
- Volume
- 11
- Issue
- 7
- Pages
- 1099
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6680561
- OpenAlex
- W2955563675
- Cited by
- 86
- References
- 58
- Citations by year
- 2026: 8 · 2025: 14 · 2024: 17 · 2023: 13 · 2022: 20 · 2021: 8 · 2020: 4 · 2019: 2
- FWCI
- 2.41
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Generalitat Valenciana (GV/2016/067)
- Ministerio de Economía y Competitividad (MAT2016-76039-C4-3-R)
- Centro de Investigación Biomédica en Red en Bioingeniería, Biomateriales y Nanomedicina (C8041228)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- polycaprolactone, graphene oxide, polymer nanocomposites, crystallinity, molecular weight reduction, hydrogen bonding, nucleation, thermal properties, biocompatibility, cell viability, biomedical materials, polymer films
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.