Morphology, Crystallinity, and Molecular Weight of Poly(ε-caprolactone)/Graphene Oxide Hybrids
Open accessThe DOI matches its Crossref record; 57 of the 58 references it cites were found in a registry or an index.
Abstract
A study was carried out to determine the effects of graphene oxide (GO) filler on the properties of poly(ε-caprolactone) (PCL) films. A series of nanocomposites were prepared, incorporating different graphene oxide filler contents (0.1, 0.2, and 0.5 wt%) by the solution mixing method, and an in-depth study was made of the morphological changes, crystallization, infrared absorbance, molecular weight, thermal properties, and biocompatibility as a function of GO content to determine their suitability for use in biomedical applications. The infrared absorbance showed the existence of intermolecular hydrogen bonds between the PCL’s carbonyl groups and the GO’s hydrogen-donating groups, which is in line with the apparent reduction in molecular weight at higher GO contents, indicated by the results of the gel permeation chromatography (GPC), and the thermal property analysis. Polarized optical microscopy (POM) showed that GO acts as a nucleating point for PCL crystals, increasing crystallinity and crystallization temperature. The biological properties of the composites studied indicate that adding only 0.1 wt% of GO can improve cellular viability and that the composite shows promise for use in biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Additionally, Thurn-Albrecht et al. demonstrated that PCL behaves as a crystal fixed polymer; when crystallized from the melt, it cannot exceed a crystallinity of ~60 %. 63,64”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [64]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“Due to its rheological properties, almost any polymer processing method can be used to produce a variety of biomaterial applications, such as drug-delivery systems, sutures, wound dressings, fixation devices, and for dentistry and tissue engineering in the form of muscle, bone, cartilage, tendon, blood, nerve, skin, a…”
BackgroundRecent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,406 · cited 2×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundGraphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123 · cited 1×
“As it can establish good interactions with organic polymers it also has enhanced processability [6,7].”
BackgroundSynthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets
Stankovich, S., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.004 · Cited by 2,224
Liang, J., Huang, Y., Zhang, L., Wang, Y., Ma, Y., Guo, T., & Chen, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801776 · Cited by 1,605
Graphene/Polyurethane Nanocomposites for Improved Gas Barrier and Electrical Conductivity
Kim, H., Miura, Y., & Macosko, C. W. (2010) · Chemistry of Materials · doi:10.1021/cm100477v · Cited by 1,399 · cited 1×
“The different processes are known to produce different nanofiller dispersion levels in the matrix and affect the polymer composite properties in different ways [17,18].”
BackgroundCytotoxicity of Graphene Oxide and Graphene in Human Erythrocytes and Skin Fibroblasts
Liao, K.-H., Lin, Y.-S., Macosko, C. W., & Haynes, C. L. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200428v · Cited by 1,370 · cited 2×
“Som studies have found that the GO toxic effect on cells depends o the do used, and that lower GO concent ation affect cell behavior po itively [23,61], phenomena which wer also found n the presen study.”
BackgroundThe effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169 · cited 1×
“Different methods have recently been proposed to process GO, including in situ polymerization, melt blending, and solution mixing, to disperse graphenes in polymer matrices [16].”
MethodInfluence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites
Song, Y. S., & Youn, J. R. (2005) · Carbon · doi:10.1016/j.carbon.2005.01.007 · Cited by 1,010 · cited 1×
“The different processes are known to produce different nanofiller dispersion levels in the matrix and affect the polymer composite properties in different ways [17,18].”
BackgroundDispersion behaviour of graphene oxide and reduced graphene oxide
Konios, D., Stylianakis, M. M., Stratakis, E., & Kymakis, E. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.05.033 · Cited by 960 · cited 1×
“It is a form of graphene with functional groups on the surface, such as carboxyl, hydroxyl, and epoxide groups, which can improve its dispersability in organic solvents [5].”
BackgroundWell-Dispersed Chitosan/Graphene Oxide Nanocomposites
Yang, X., Tu, Y., Li, L., Shang, S., & Tao, X.-M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100222m · Cited by 755
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750 · cited 1×
“5 J·g−1 for the 100% crystalline PCL, according to [38].”
BackgroundGraphene-based materials for tissue engineering
Shin, S. R., Li, Y.-C., Jang, H. L., Khoshakhlagh, P., Akbari, M., Nasajpour, A., Zhang, Y. S., Tamayol, A., & Khademhosseini, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.007 · Cited by 721 · cited 1×
“Due to its peculiar atomic arrangements, GO has a strong adsorbing capacity which makes it suitable for use as a gene/drug delivery vehicle [29,30].”
BackgroundDistribution and biocompatibility studies of graphene oxide in mice after intravenous administration
Zhang, X., Yin, J., Peng, C., Hu, W., Zhu, Z., Li, W., Fan, C., & Huang, Q. (2011) · Carbon · doi:10.1016/j.carbon.2010.11.005 · Cited by 702 · cited 1×
“Several authors have studied graphene oxide (GO) biocompatibility in mice in a series of biological assays and obtained significant pathological changes [31].”
BackgroundIn situ Polymerization Approach to Graphene-Reinforced Nylon-6 Composites
Xu, Z., & Gao, C. (2010) · Macromolecules · doi:10.1021/ma1009337 · Cited by 667
Song, P., Cao, Z., Cai, Y., Zhao, L., Fang, Z., & Fu, S. (2011) · Polymer · doi:10.1016/j.polymer.2011.06.045 · Cited by 623 · cited 1×
“The lack of GO diffraction peaks could be attributed to the proper dispersion of GO nanosheets within the PCL matrix, as reported in previous studies [58,59].”
ResultHan, D., Yan, L., Chen, W., & Li, W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.038 · Cited by 569
Graphene: Safe or Toxic? The Two Faces of the Medal
Bianco, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209099 · Cited by 557 · cited 1×
“Due to its peculiar atomic arrangements, GO has a strong adsorbing capacity which makes it suitable for use as a gene/drug delivery vehicle [29,30].”
BackgroundPolymeric Modification of Graphene through Esterification of Graphite Oxide and Poly(vinyl alcohol)
Salavagione, H. J., Gómez, M. A., & Martínez, G. (2009) · Macromolecules · doi:10.1021/ma900845w · Cited by 542
Bao, C., Guo, Y., Song, L., Kan, Y., Qian, X., & Hu, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11434d · Cited by 412 · cited 1×
“The lack of GO diffraction peaks could be attributed to the proper dispersion of GO nanosheets within the PCL matrix, as reported in previous studies [58,59].”
ResultBao, C., Guo, Y., Song, L., & Hu, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11662b · Cited by 399
Graphene oxide incorporated functional materials: A review
Ahmad, H., Fan, M., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.006 · Cited by 315 · cited 1×
“Sonication, or high-speed shearing, together with solution-phase mixing have been proposed to improve its dispersity and make GO more soluble in non-polar solvents [19].”
BackgroundColeman, M. M., & Zarian, J. (1979) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1979.180170509 · Cited by 296
Graphene Oxide−Polyelectrolyte Nanomembranes
Kulkarni, D. D., Choi, I., Singamaneni, S. S., & Tsukruk, V. V. (2010) · ACS Nano · doi:10.1021/nn101204d · Cited by 281
Covalently linked biocompatible graphene/polycaprolactone composites for tissue engineering
Sayyar, S., Murray, E., Thompson, B. C., Gambhir, S., Officer, D. L., & Wallace, G. G. (2013) · Carbon · doi:10.1016/j.carbon.2012.09.031 · Cited by 246 · cited 2×
“Some studies have shown that graphene increases the number of crystallization nucleation sites and thus changes the size and number of the spherulite crystalline regions in polycaprolactone [25].”
BackgroundLuong, N. D., Hippi, U., Korhonen, J. T., Soininen, A. J., Ruokolainen, J., Johansson, L.-S., Nam, J.-D., Sinh, L. H., & Seppälä, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.09.033 · Cited by 237
Song, J., Gao, H., Zhu, G., Cao, X., Shi, X., & Wang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.09.011 · Cited by 236 · cited 6×
“5 wt%, it had adverse effects on cellular behavior, as has also been found by other authors [23].”
BackgroundMethodResultInfluentialIn Vivo Compatibility of Graphene Oxide with Differing Oxidation States
Sydlik, S. A., Jhunjhunwala, S., Webber, M. J., Anderson, D. G., & Langer, R. (2015) · ACS Nano · doi:10.1021/acsnano.5b01290 · Cited by 235 · cited 1×
“found GO to be moderately compatible in vivo in subcutaneous and intraperitoneal tissue sites, an important issue for medical applications with the risk of inflammation due to foreign bodies [37].”
BackgroundSantos, C. M., Mangadlao, J., Ahmed, F., Leon, A., Advincula, R. C., & Rodrigues, D. F. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/39/395101 · Cited by 208
Poly(ε-caprolactone)/graphene oxide biocomposites: mechanical properties and bioactivity
Wan, C., & Chen, B. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/5/055010 · Cited by 205 · cited 4×
“Other studies found PCL/GO composites to be useful for various biomedical applications [22,27,28].”
BackgroundMethodInfluentialLim, . N., Huang, N. M., & Loo, C. H. (2011) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2011.11.007 · Cited by 157
Thermal and mechanical properties of a poly(ϵ‐caprolactone)/graphite oxide composite
Kai, W., Hirota, Y., Hua, L., & Inoue, Y. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27210 · Cited by 153 · cited 5×
“However, other studies [20,52] have found that crystallinity is reduced when the volum fraction of t e fillers is increased, which they attribute to the interfacial interactions between GO nanoplatelets and PCL molecular chains.”
BackgroundMethodInfluentialSome, S., Ho, S., Dua, P., Hwang, E., Shin, Y. H., Yoo, H., Kang, J., Lee, D.-K., & Lee, H. (2012) · ACS Nano · doi:10.1021/nn302215y · Cited by 148
Chain Dimensions in Filled Polymers: An Intriguing Problem
Vacatello, M. (2002) · Macromolecules · doi:10.1021/ma020416s · Cited by 105 · cited 1×
“This could be responsible for the reduced chain dimensions (see Figure 9) [48,49], and therefore longer elution time, and an apparent reduction in the molecular weight as measured by GPC compared to neat PCL.”
BackgroundConformations of Silica−Poly(ethylene−propylene) Nanocomposites
Nusser, K., Neueder, S., Schneider, G. J., Meyer, M., Pyckhout‐Hintzen, W., Willner, L., Rădulescu, A., & Richter, D. (2010) · Macromolecules · doi:10.1021/ma101898c · Cited by 104
The Effects of Extensive Glomerular Filtration of Thin Graphene Oxide Sheets on Kidney Physiology
Jasim, D. A., Murphy, S., Newman, L., Mironov, A., Prestat, É., McCaffrey, J., Ménard‐Moyon, C., Rodrigues, A. F., Bianco, A., Haigh, S. J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b03358 · Cited by 94 · cited 1×
“studied the mechanisms by which 2D materials can interact with physiological barriers for potential diagnostic and therapeutic use [32].”
BackgroundRamazani, S., & Karimi, M. B. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.06.045 · Cited by 91 · cited 3×
“In other studies [24,44,45] with polymerization in the presence of GO it has been found that GO reduced the initiator efficiency and the reaction rate, with a slight increase in the average molecular weight of the polymer formed, but this was not the case here.”
BackgroundHonma, T., Senda, T., & Inoue, Y. (2003) · Polymer International · doi:10.1002/pi.1380 · Cited by 90 · cited 1×
“Due to the semicrystalline nature of PCL and its composites, spectra were resolved on the basis of three Laurentzian shaped absorption bands with maximum absorbance at 1734, 1721, and 1700 cm−1, which are attributed to carboxyl absorption bands of amorphous phase, crystalline phase, and hydrogen bonds [22,43,44].”
BackgroundPeng, H.-D., Han, Y., Liu, T. X., Tjiu, W. C., & He, C. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.01.009 · Cited by 83 · cited 2×
“6◦ for pristine PCL, which correspond to (110) and (200) crystallographic planes, respectively [54].”
Background3D scaffold alters cellular response to graphene in a polymer composite for orthopedic applications
Kumar, S., Azam, D., Raj, S., Kolanthai, E., Vasu, K. S., Sood, A. K., & Chatterjee, K. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33549 · Cited by 75 · cited 5×
“This last result, also found in a previous study [28], can be attributed to the effect of the physical barrier composed of nanoparticles that limits crystallite size.”
BackgroundResultInfluentialWang, G., Wei, Z., Sang, L., Chen, G., Zhang, W., Dong, X., & Qi, M. (2013) · Chinese Journal of Polymer Science · doi:10.1007/s10118-013-1278-8 · Cited by 53
A bio-friendly, green route to processable, biocompatible graphene/polymer composites
Murray, E., Sayyar, S., Thompson, B. C., Gorkin, R. A., III, Officer, D. L., & Wallace, G. G. (2015) · RSC Advances · doi:10.1039/c5ra07210g · Cited by 50
Yıldırım, S., Demirtaş, T. T., Dinçer, C. A., Yıldız, N., & Karakeçili, A. G. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2017.10.009 · Cited by 50
Huang, Y., Xu, Z., Huang, Y., Ma, D., Yang, J., & Mays, J. W. (2003) · International Journal of Polymer Analysis and Characterization · doi:10.1080/714975019 · Cited by 44 · cited 1×
“149 nm [46]), so that the size of the GO nanoplates inserted into the macromolecules must be of that order or smaller (Figure 9).”
BackgroundTsagkalias, I. S., Manios, T. K., & Achilias, D. S. (2017) · Polymers · doi:10.3390/polym9090432 · Cited by 40
Crystallization behavior of poly(ϵ‐caprolactone)/graphite oxide composites
Hua, L., Kai, W., & Inoue, Y. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26976 · Cited by 38 · cited 4×
“5, a remarkable relative increase of 25%, as has been reported in previous studies [24,28,51].”
BackgroundResultInfluentialHassanzadeh, S., Adolfsson, K. H., Wu, D., & Hakkarainen, M. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01339 · Cited by 35 · cited 1×
“Other studies found PCL/GO composites to be useful for various biomedical applications [22,27,28].”
BackgroundSánchez‐Correa, F., Vidaurre-Agut, C., Serrano‐Aroca, Á., & Campillo-Fernández, A. J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.46158 · Cited by 35 · cited 1×
“The GO thermal degradation data were taken from [60].”
MethodSelf-citationGeng, L., Peng, X., Jing, X., Li, L., Huang, A., Xu, B., Chen, B., & Mi, H. (2016) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2016.13 · Cited by 30
Sharaf, M. A., Kloczkowski, A., Sen, T. Z., Jacob, K. I., & Mark, J. E. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.10.009 · Cited by 22 · cited 1×
“Many of the processes by which fillers affect polymers are still not fully understood, as has been pointed out in the literature [47,48].”
BackgroundMichailidis, M., Verros, G. D., Deliyanni, E. A., Andriotis, E. G., & Achilias, D. S. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28512 · Cited by 20
Influence of Enzymatic Degradation on Physical Properties of Poly(ε‐caprolactone) Films and Sponges
Vidaurre, A., Dueñas, J. M. M., Estellés, J. M., & Cortázar, I. C. (2008) · Macromolecular Symposia · doi:10.1002/masy.200850907 · Cited by 18
Self-citationLuo, H., Meng, X., Cheng, C., Dong, Z., Zhang, S., & Li, B. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp1001836 · Cited by 15
Structure and Morphology of Microbial Degraded Poly(ε-caprolactone)/Graphite Oxide Composite
Bálková, R., Hermanová, S., Voběrková, S., Damborský, P., Richtera, L., Omelková, J., & Jančář, J. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0630-y · Cited by 15 · cited 3×
“However, other studies [20,52] have found that crystallinity is reduced when the volume fraction of the fillers is increased, which they attribute to the interfacial interactions between GO nanoplatelets and PCL molecular chains.”
BackgroundDuan, T., Lv, Y., Xu, H., Jin, J., & Wang, Z. (2018) · Crystals · doi:10.3390/cryst8070270 · Cited by 14
Research works printed but not linked: 3
- Brodie, 1860, Sur le poids atomique du graphite, Ann. Chim. Phys., 59, e472
- Donlan, R.M., Wu, P., Grainger, D.W., and Ratner, B.D. (2004). An introduction to materials in medicine, Elsevier Academic Press.
- Klug, H.P., and Alexander, L.E. (1974). X-Ray Diffraction Procedures: For Polycrystalline and Amorphous Materials, John Wiley & Sons, Inc.. [2nd ed.].
Cited by
Ansari, M. A. A., Golebiowska, A. A., Dash, M., Kumar, P., Jain, P. K., Nukavarapu, S. P., Ramakrishna, S., & Nanda, H. S. (2022) · Biomaterials Science · doi:10.1039/d2bm00035k · Cited by 136
Bozkaya, O., Arat, E., Gün Gök, Z., Yiğitoğlu, M., & Vargel, İ. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111023 · Cited by 85
Raza, M. A., Sharma, M. K., Nagori, K., Jain, P., Ghosh, V., Gupta, U. D., & Ajazuddin, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124734 · Cited by 77
Tayouri, M. I., Estaji, S., Mousavi, S. R., Khasraghi, S. S., Jahanmardi, R., Nouranian, S., Arjmand, M., & Khonakdar, H. A. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110179 · Cited by 66
Mulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Metadata
- Authors
- Castilla-Cortázar, I., Vidaurre, A., Marí, B., & Campillo-Fernández, A. J.
- Affiliations
- Centro de Biomateriales e Ingeniería Tisular (ES)
- Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (ES)
- Departamento de Física Aplicada-IDF, Universitat Politècnica de València, 46022 Valencia, Spain
- Corresponding author
- Campillo-Fernández, Alberto J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-06-28
- Volume
- 11
- Issue
- 7
- Pages
- 1099
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6680561
- OpenAlex
- W2955563675
- Cited by
- 86
- References
- 58
- Citations by year
- 2026: 8 · 2025: 14 · 2024: 17 · 2023: 13 · 2022: 20 · 2021: 8 · 2020: 4 · 2019: 2
- FWCI
- 2.41
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Generalitat Valenciana (GV/2016/067)
- Ministerio de Economía y Competitividad (MAT2016-76039-C4-3-R)
- Centro de Investigación Biomédica en Red en Bioingeniería, Biomateriales y Nanomedicina (C8041228)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- polycaprolactone, graphene oxide, polymer nanocomposites, crystallinity, molecular weight reduction, hydrogen bonding, nucleation, thermal properties, biocompatibility, cell viability, biomedical materials, polymer films
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.