The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Injectable Hydrogels: From Laboratory to Industrialization
Open accessAbstract
The transfer of some innovative technologies from the laboratory to industrial scale is many times not taken into account in the design and development of some functional materials such as hydrogels to be applied in the biomedical field. There is a lack of knowledge in the scientific field where many aspects of scaling to an industrial process are ignored, and products cannot reach the market. Injectable hydrogels are a good example that we have used in our research to show the different steps needed to follow to get a product in the market based on them. From synthesis and process validation to characterization techniques used and assays performed to ensure the safety and efficacy of the product, following regulation, several well-defined protocols must be adopted. Therefore, this paper summarized all these aspects due to the lack of knowledge that exists about the industrialization of injectable products with the great importance that it entails, and it is intended to serve as a guide on this area to non-initiated scientists. More concretely, in this work, the characteristics and requirements for the development of injectable hydrogels from the laboratory to industrial scale is presented in terms of (i) synthesis techniques employed to obtain injectable hydrogels with tunable desired properties, (ii) the most common characterization techniques to characterize hydrogels, and (iii) the necessary safety and efficacy assays and protocols to industrialize and commercialize injectable hydrogels from the regulatory point of view. Finally, this review also mentioned and explained a real example of the development of a natural hyaluronic acid hydrogel that reached the market as an injectable product.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Understanding pharmaceutical quality by design
Yu, L. X., Amidon, G., Khan, M. A., Hoag, S. W., Polli, J., Raju, G. K., & Woodcock, J. (2014) · The AAPS Journal · doi:10.1208/s12248-014-9598-3 · Cited by 1,475
Hyaluronic acid based scaffolds for tissue engineering—A review
Collins, M. N., & Birkinshaw, C. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.028 · Cited by 1,092
Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery
Chang, C., Duan, B., Cai, J., & Zhang, L. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.033 · Cited by 795
Biodegradable Hydrogels for Drug Delivery
Park, H., Park, K., & Shalaby, W. S. W. (1993) · CRC Press eBooks · doi:10.1201/9780429259098 · Cited by 697
Ninan, N., Forget, A., Shastri, V. P., Voelcker, N. H., & Blencowe, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10491 · Cited by 676
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Biopolymer-Based Hydrogels for Cartilage Tissue Engineering
Balakrishnan, B., & Banerjee, R. (2011) · Chemical Reviews · doi:10.1021/cr100123h · Cited by 547
Biodegradable hydrogels in drug delivery
Kamath, K. R., & Park, K. (1993) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(93)90027-2 · Cited by 539
Sapsford, K. E., Tyner, K. M., Dair, B. J., Deschamps, J. R., & Medintz, I. L. (2011) · Analytical Chemistry · doi:10.1021/ac200853a · Cited by 538
Li, L., Wang, N., Jin, X., Deng, R., Nie, S., Sun, L., Wu, Q., Wei, Y., & Gong, C. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.050 · Cited by 455
Chitosan hydrogels for sustained drug delivery
Peers, S., Montembault, A., & Ladavière, C. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.06.012 · Cited by 449
Hydrogel-based commercial products for biomedical applications: A review
Cascone, S., & Lamberti, G. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118803 · Cited by 421
A protocol for rheological characterization of hydrogels for tissue engineering strategies
Zuidema, J. M., Rivet, C. J., Gilbert, R. J., & Morrison, F. A. (2014) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33088 · Cited by 394
Recent advances in shear‐thinning and self‐healing hydrogels for biomedical applications
Uman, S., Dhand, A., & Burdick, J. A. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48668 · Cited by 368
Injectable hydrogels delivering therapeutic agents for disease treatment and tissue engineering
Lee, J. H. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0138-6 · Cited by 342
Thermosensitive Hydrogels as Scaffolds for Cartilage Tissue Engineering
Zhang, Y., Yu, J., Ren, K., Zuo, J., Ding, J., & Chen, X. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00043 · Cited by 317
Synthesis and Characterization of PEG Dimethacrylates and Their Hydrogels
Lin-Gibson, S., Bencherif, S., Cooper, J. A., Wetzel, S. J., Antonucci, J. M., Vogel, B. M., Horkay, F., & Washburn, N. R. (2004) · Biomacromolecules · doi:10.1021/bm0498777 · Cited by 277
Design of Nanocomposite Injectable Hydrogels for Minimally Invasive Surgery
Piantanida, E., Alonci, G., Bertucci, A., & De Cola, L. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00114 · Cited by 240
Rheological Properties of Cross‐Linked Hyaluronan–Gelatin Hydrogels for Tissue Engineering
Vanderhooft, J. L., Alcoutlabi, M., Magda, J. J., & Prestwich, G. D. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200800141 · Cited by 238
Recent advances of injectable hydrogels for drug delivery and tissue engineering applications
Sun, Y., Nan, D., Jin, H., & Qu, X. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106283 · Cited by 227
Townsend, J. M., Beck, E. C., Gehrke, S. H., Berkland, C. J., & Detamore, M. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.003 · Cited by 215
Zhang, W., Jin, X., Li, H., Zhang, R.-R., & Wu, C.-W. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.008 · Cited by 214
Resolution and aberration correction in liquid cell transmission electron microscopy
de Jonge, N., Houben, L., Dunin-Borkowski, R. E., & Ross, F. M. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0071-2 · Cited by 206
Ren, B., Chen, X., Du, S., Ma, Y., Chen, H., Yuan, G., Li, J., Xiong, D., Tan, H., Ling, Z., et al. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.06.200 · Cited by 203
Sol−Gel Transition Temperature of PLGA-g-PEG Aqueous Solutions
Chung, Y.-M., Simmons, K. L., Gutowska, A., & Jeong, B. (2002) · Biomacromolecules · doi:10.1021/bm0156431 · Cited by 194
Injectable shear-thinning hydrogels engineered with a self-assembling Dock-and-Lock mechanism
Lu, H. D., Charati, M. B., Kim, I. L., & Burdick, J. A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.076 · Cited by 190
Chemical functionalization of hyaluronic acid for drug delivery applications
Vasi, A.-M., Popa, M. I., Butnaru, M., Dodi, G., & Verestiuc, L. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.052 · Cited by 185
Injectable fillers for facial rejuvenation: a review
Buck, D. W., Alam, M., & Kim, J. Y. S. (2009) · Journal of Plastic, Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2008.06.036 · Cited by 181
Stimuli‐Sensitive Injectable Hydrogels Based on Polysaccharides and Their Biomedical Applications
Thambi, T., Phan, V. H. G., & Lee, D. S. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600371 · Cited by 181
Aston, R., Sewell, K., Klein, T., Lawrie, G., & Grøndahl, L. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.06.025 · Cited by 172
Alginate–hyaluronan composite hydrogels accelerate wound healing process
Catanzano, O., D’Esposito, V., Acierno, S., Ambrosio, M. R., Caro, C. D., Avagliano, C., Russo, P., Russo, R., Miro, A., Ungaro, F., et al. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.05.081 · Cited by 160
Kaberova, Z., Karpushkin, E. A., Nevoralová, M., Vetrík, M., Šlouf, M., & Dušková‐Smrc̆ková, M. (2020) · Polymers · doi:10.3390/polym12030578 · Cited by 155
Degradable and Injectable Hydrogel for Drug Delivery in Soft Tissues
Pertici, V., Pin-Barre, C., Rivera, C., Pellegrino, C., Laurin, J., Gigmès, D., & Trimaille, T. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01242 · Cited by 145
Hydrogel swelling behavior and its biomedical applications
Holback, H., Yeo, Y., & Park, K. (2011) · Elsevier eBooks · doi:10.1533/9780857091383.1.3 · Cited by 132
ON-LINE SENSORS FOR POLYMERIZATION REACTORS
Chien, D. C. H., & Penlidis, A. (1990) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/07366579008050904 · Cited by 120
Synthesis and Antimicrobial Activity of Some Novel Cross-Linked Chitosan Hydrogels
Mohamed, N. A., & Fahmy, M. M. (2012) · International Journal of Molecular Sciences · doi:10.3390/ijms130911194 · Cited by 120
Guo, M., Jiang, M., Pispas, S., Yu, W., & Zhou, C. (2008) · Macromolecules · doi:10.1021/ma801975s · Cited by 119
Agar gel strength: A correlation study between chemical composition and rheological properties
Bertasa, M., Dodero, A., Alloisio, M., Vicini, S., Riedo, C., Sansonetti, A., Scalarone, D., & Castellano, M. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109442 · Cited by 115
Tang, Y., Wang, X., Li, Y., Lei, M., Du, Y., Kennedy, J. F., & Knill, C. J. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.06.003 · Cited by 114
Intravesical Hydrogels as Drug Reservoirs
Qiu, H., Guo, H., Li, D., Hou, Y., Kuang, T., & Ding, J. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.12.012 · Cited by 114
A micro-rheological and rheological study of biopolymers solutions: Hyaluronic acid
Dodero, A., Williams, R., Gagliardi, S., Vicini, S., Alloisio, M., & Castellano, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.072 · Cited by 112
Bozoğlan, B. K., Duman, O., & Tunç, S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.087 · Cited by 109
Al‐Sabah, A., Burnell, S. E. A., Simões, I. N., Jessop, Z. M., Badiei, N., Blain, E. J., & Whitaker, I. S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.057 · Cited by 106
Self-healable hyaluronic acid/chitosan polyelectrolyte complex hydrogels and multilayers
Barroso, N., Guaresti, O., Pérez‐Álvarez, L., Ruiz‐Rubio, L., Gabilondo, N., & Vilas‐Vilela, J. L. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109268 · Cited by 106
Waters, D. J., Engberg, K., Parke-Houben, R., Hartmann, L., Ta, C. N., Toney, M. F., & Frank, C. W. (2010) · Macromolecules · doi:10.1021/ma101070s · Cited by 103
Ahmad, U., Sohail, M. F., Ahmad, M., Minhas, M. U., Khan, S., Hussain, Z., Kousar, M., Mohsin, S., Abbasi, M., Shah, S. A., et al. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.02.031 · Cited by 100
Maiz–Fernández, S., Guaresti, O., Pérez‐Álvarez, L., Ruiz‐Rubio, L., Gabilondo, N., Vilas‐Vilela, J. L., & Lanceros-Méndez, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116811 · Cited by 95
Moreira, C. D. F., Carvalho, S. M., de Sousa, R. G., Mansur, H. S., & Pereira, M. M. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.07.039 · Cited by 89
Natural hydrogels R&D process: technical and regulatory aspects for industrial implementation
Catoira, M. C., González-Payo, J., Fusaro, L., Ramella, M., & Boccafoschi, F. (2020) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-020-06401-w · Cited by 89
An injectable and physical levan-based hydrogel as a dermal filler for soft tissue augmentation
Choi, W. I., Hwang, Y.-M., Sahu, A., Min, K., Sung, D., Tae, G., & Chang, J. H. (2018) · Biomaterials Science · doi:10.1039/c8bm00524a · Cited by 87
Abdelgawad, K., Elkatatny, S. M., Moussa, T., Mahmoud, M., & Patil, S. L. (2018) · Journal of Energy Resources Technology · doi:10.1115/1.4042233 · Cited by 86
3D printing of shape memory hydrogels with tunable mechanical properties
Shiblee, M. N. I., Ahmed, K., Khosla, A., Kawakami, M., & Furukawa, H. (2018) · Soft Matter · doi:10.1039/c8sm01156g · Cited by 76
Gloria, A., Borzacchiello, A., Causa, F., & Ambrosio, L. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210387174 · Cited by 73
Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications
Maiz–Fernández, S., Pérez‐Álvarez, L., Ruiz‐Rubio, L., Vilas‐Vilela, J. L., & Lanceros-Méndez, S. (2020) · Polymers · doi:10.3390/polym12102261 · Cited by 67
Maiz–Fernández, S., Pérez‐Álvarez, L., Ruiz‐Rubio, L., González, R. P., Sáez‐Martínez, V., Pérez, J., & Vilas‐Vilela, J. L. (2019) · Polymers · doi:10.3390/polym11040742 · Cited by 65
Ketabat, F., Karkhaneh, A., Aghdam, R. M., & Tafti, S. H. A. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1302314 · Cited by 64
Ornell, K. J., Lozada, D., Phan, N. V., & Coburn, J. M. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb03020k · Cited by 63
Kim, Z.-H., Lee, Y., Kim, S., Kim, H., Yun, C., & Choi, Y. (2015) · Journal of Microbiology and Biotechnology · doi:10.4014/jmb.1411.11029 · Cited by 58
Gatta, A. L., Schiraldi, C., Papa, A., & ROSA, M. D. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.12.025 · Cited by 57
Injectable Hydrogels from Segmented PEG-Bisurea Copolymers
Pawar, G. M., Koenigs, M. M. E., Fahimi, Z., Cox, M. A. J., Voets, I. K., Wyss, H. M., & Sijbesma, R. P. (2012) · Biomacromolecules · doi:10.1021/bm301242v · Cited by 57
Le, T. M. D., Jung, B., Li, Y., Duong, H. T. T., Nguyen, T. L., Hong, J. W., Yun, C., & Lee, D. S. (2019) · Biomaterials Science · doi:10.1039/c9bm00992b · Cited by 51
Adhesive Hydrogels for Maxillofacial Tissue Regeneration Using Minimally Invasive Procedures
Salzlechner, C., Haghighi, T., Huebscher, I., Walther, A. R., Schell, S., Gardner, A., Undt, G., da Silva, R. M. P., Dreiss, C. A., Fan, K., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901134 · Cited by 44
Rad, E. R., Vahabi, H., Formela, K., Saeb, M. R., & Thomas, S. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4654 · Cited by 37
Hyun, H., Park, M. H., Lim, W., Kim, S. Y., Jo, D., Jung, J. S., Jo, G., Um, S., Lee, D., & Yang, D. H. (2018) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2018.1470529 · Cited by 35
Injectable Hydrogels: A Review of Injectability Mechanisms and Biomedical Applications
Mellati, A., & Akhtari, J. (2019) · Research in Molecular Medicine · doi:10.18502/rmm.v6i4.4799 · Cited by 30
Moeinzadeh, S., & Jabbari, E. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.028 · Cited by 25
Chiesa, E., Genta, I., Dorati, R., Modena, T., & Conti, B. (2019) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2019.03.021 · Cited by 22
Technological challenges in the preclinical development of an HIV nanovaccine candidate
Dacoba, T. G., Ruiz-Gatón, L., Benito, A., Klein, M., Dupin, D., Luo, M., Menta, M., Teijeiro‐Osorio, D., Loinaz, I., Alonso, M. J., et al. (2020) · Drug Delivery and Translational Research · doi:10.1007/s13346-020-00721-8 · Cited by 18
Belmar, L., Toledo, L., Sánchez, S. A., & Urbano, B. F. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.07.002 · Cited by 14
63 The design of stirred batch polymerisation reactor
Cardinal, G. L., Germain, E., Gelus, M., & Guillon, B. (1980) · Chemical Engineering Science · doi:10.1016/0009-2509(80)80125-4 · Cited by 4
Almeira, L. D. F., Babo, P., Silva, C. R., Rodrigues, M. T., Hebling, J., Reis, R. L., & Gomes, M. E. (2017) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.1007/s10856-018-6088-7
Cited by
Rheological considerations of pharmaceutical formulations: focus on viscoelasticity
Budai, L., Budai, M., Fülöpné Pápay, Z. E., Vilimi, Z., & Antal, I. (2023) · Gels · doi:10.3390/gels9060469 · Cited by 91
Hydrogel network architecture design space: impact on mechanical and viscoelastic properties
Roca-Arroyo, A. F., Gutierrez-Rivera, J. A., Morton, L. D., & Castilla-Casadiego, D. A. (2025) · Gels · doi:10.3390/gels11080588 · Cited by 88
Mashweu, A. R., & Azov, V. A. (2024) · doi:10.20944/preprints202410.2092.v1 · Cited by 10
Metadata
- Authors
- Alonso, J. M., Andrade del Olmo, J., Perez Gonzalez, R., & Saez-Martinez, V.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-22
- Volume
- 13
- Issue
- 4
- Pages
- 650
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3130892721
- Cited by
- 266
- References
- 74
- FWCI
- 8.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.